Triatomines in dwellings and outbuildings in an endemic area of Chagas disease in northeastern Brazil

INTRODUCTION: The present study identified the triatomines collected in intra and peri-domestic environments, observed the occurrence of Trypanosoma cruzi infection in triatomines and correlated this information with housing conditions and the fauna associated with the rural areas of the City of Itabaianinha, located in the State of Sergipe, Brazil. METHODS: Quarterly visits were conducted between March 2009 and March 2010, and the homes to be visited for the active search of insects were determined by random selection. In each housing unit, the insects were collected by a manual search with a metal clip and flashlight to inspect openings and cavities, with a collection time of one hour/home/individual. The Pirisa® dislodge chemical was used to force the insects to leave their ecotopes. Analysis of the intestinal contents of triatomines was performed in the laboratory to establish the presence of Trypanosomatidae. RESULTS: Of the 103 dwellings surveyed, 17.5% were infested with Panstrongylus megistus. The village of Mutuca exhibited the highest infestation rate (38.1%). All the villages with relevant infestation rates were situated in the northern area of the city. The highest percentage of vector infection was found in the village of Água Boa (56.5%). The rural dwellings were found to be primarily brick or wooden house with or without roughcast or plastered walls, and the outbuilding most frequently associated with triatomines was the chicken run. CONCLUSIONS: These results emphasise the need for broader vector control and surveillance and for educational campaigns in the context of the Chagas Disease Control Program.

Valorization of agroindustrial waste

The main objective of this work is the valorization of residues from agro-industry giving them an added value. The valorization was performed by using a "green" and sustainable solvent - supercritical fluid, in this case carbon dioxide. Two residues and one biomass were used to produce two different final products, thereby emphasizing the versatility of the waste recovery - spent coffee grounds and microalgae Chlorella protothecoides to produce biodiesel, and tomato pomace to extract carotenoids. In the first part of this work it was demonstrated the possibility to obtain a conversion of coffee spent grounds oil into biodiesel, through an enzymatic transesterification reaction, of 98.01% with the following operating conditions: molar ratio oil:methanol 1:24, residence time 0.8 min, pressure 25 MPa, temperature 313,15K. In this first phase, it was also used the microalgae Chlorella protothecoides, a biomass, to produce biodiesel and favorable results were obtained with this green process compared with a traditional process - basic catalysis / acid. In the second part of this work, by an extraction with supercritical CO2 it was obtained 3.38% oil from tomato pomace under the following conditions: pressure 35.1 MPa, temperature 313,15K. It was found that this oil contains various carotenoids: β-carotene, lutein and lycopene. The latter is present in larger amount.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Valorization of grape pomace through hot compressed water extraction/hydrolysis

The world energy consumption is expected to increase strongly in coming years, because of the emerging economies. Biomass is the only renewable carbon resource that is abundant enough to be used as a source of energy Grape pomace is one of the most abundant agro-industrial residues in the world, being a good biomass resource. The aim of this work is the valorization of grape pomace from white grapes (WWGP) and from red grapes (RWGP), through the extraction of phenolic compounds with antioxidant activity, as well as through the extraction/hydrolysis of carbohydrates, using subcritical water, or hot compressed water (HCW). The main focus of this work is the optimization of the process for WWGP, while for RWGP only one set of parameters were tested. The temperatures used were 170, 190 and 210 °C for WWGP, and 180 °C for RWGP. The water flow rates were 5 and 10 mL/min, and the pressure was always kept at 100 bar. Before performing HCW assays, both residues were characterized, revealing that WWGP is very rich in free sugars (around 40%) essentially glucose and fructose, while RWGP has higher contents of structural sugars, lignin, lipids and protein. For WWGP the best results were achieved at 210 °C and 10 mL/min: higher yield in water soluble compounds (69 wt.%), phenolics extraction (26.2 mg/g) and carbohydrates recovery (49.3 wt.% relative to the existing 57.8%). For RWGP the conditions were not optimized (180 °C and 5 mL/min), and the values of the yield in water soluble compounds (25 wt.%), phenolics extraction (19.5 mg/g) and carbohydrates recovery (11.4 wt.% relative to the existing 33.5%) were much lower. The antioxidant activity of the HCW extracts from each assay was determined, the best result being obtained for WWGP, namely for extracts obtained at 210 °C (EC50=20.8 μg/mL; EC50 = half maximum effective concentration; EC50 = 22.1 μg/mL for RWGP, at 180 ºC).

Monoterpene isolated from the essential oil of Trachyspermum ammi is cytotoxic to multidrug-resistant Pseudomonas aeruginosa and Staphylococcus aureus strains

Abstract INTRODUCTION: The aim of this study was to determine whether an herbal extract containing monoterpene exhibited activity against multidrug-resistant Staphylococcus aureus and Pseudomonas aeruginosa isolated from clinical infection samples. METHODS: The essential oil of Trachyspermum ammi (L.) Sprague ex Turrill (Apiaceae) fruit was extracted by hydrodistillation. Fruit residues were treated with hydrochloric acid and re-hydrodistilled to obtain volatile compounds. Compounds in the distilled oil were identified using gas-chromatography (GC) and GC-mass spectrometry (MS). The antibiotic susceptibility of all bacterial isolates was analyzed using both the disc diffusion method and determination of the minimum inhibitory concentration (MIC). The sensitivity of antibiotic-resistant isolates to essential oil was also determined by using the disc diffusion method and MIC determination. RESULTS: Of 26 clinical isolates, 92% were multidrug-resistant (MDR). Aromatic monoterpenes (thymol, paracymene, and gamma-terpinene) were the major (90%) components of the oil. Growth of S. aureus strains was successfully inhibited by the oil, with an inhibitory zone diameter (IZD) between 30-60mm and MIC <0.02μL/mL. The oil had no antimicrobial activity against clinical isolates of P. aeruginosa; rather, it prevented pigment production in these isolates. CONCLUSIONS: This study revealed that the essential oil of Trachyspermum ammi, which contains monoterpene, has good antibacterial potency. Monoterpenes could thus be incorporated into antimicrobial ointment formulas in order to treat highly drug-resistant S. aureus infections. Our findings also underscore the utility of research on natural products in order to combat bacterial multidrug resistance.

Effects of continuous versus bolus infusion of enteral nutrition in critical patients

PURPOSE: Enteral alimentation is the preferred modality of support in critical patients who have acceptable digestive function and are unable to eat orally, but the advantages of continuous versus intermittent administration are surrounded by controversy. With the purpose of identifying the benefits and complications of each technique, a prospective controlled study with matched subjects was conducted. PATIENTS AND METHODS: Twenty-eight consecutive candidates for enteral feeding were divided into 2 groups (n = 14 each) that were matched for diagnosis and APACHE II score. A commercial immune-stimulating polymeric diet was administered via nasogastric tube by electronic pump in the proportion of 25 kcal/kg/day, either as a 1-hour bolus every 3 hours (Group I), or continuously for 24 hours (Group II), over a 3-day period. Anthropometrics, biochemical measurements, recording of administered drugs and other therapies, thorax X-ray, measurement of abdominal circumference, monitoring of gastric residue, and clinical and nutritional assessments were performed at least once daily. The principal measured outcomes of this protocol were frequency of abdominal distention and pulmonary aspiration, and efficacy in supplying the desired amount of nutrients. RESULTS: Nearly half of the total population (46.4%) exhibited high gastric residues on at least 1 occasion, but only 1 confirmed episode of pulmonary aspiration occurred (3.6%). Both groups displayed a moderate number of complications, without differences. Food input during the first day was greater in Group II (approximately 20% difference), but by the third day, both groups displayed similarly small deficits in total furnished volume of about 10%, when compared with the prescribed diet. CONCLUSIONS: Both administration modalities permitted practical and effective administration of the diet with frequent registered abnormalities but few clinically significant problems. The two groups were similar in this regard, without statistical differences, probably because of meticulous technique, careful monitoring, strict patient matching, and conservative amounts of diet employed in both situations. Further studies with additional populations, diagnostic groups, and dietetic prescriptions should be performed in order to elucidate the differences between these commonly used feeding modalities.

The role of α2,3- and α2,6-sialylation

RESUMO: Os glicoconjugados que decoram a superfície celular e os lípidos e proteínas secretados ocupam o ponto de encontro onde normalmente ocorrem interacções críticas homólogas (hospedeiro-hospedeiro) e heterólogas (hospedeiro-patogénio). Apesar de ser largamente aceite que os glicanos são parte integrante do processo de imunidade, continua a não ser claro qual o papel que os glicanos, em toda a sua diversidade, tomam no quadro geral da imunidade. Os glicanos, que são frequentemente terminados por resíduos de ácido siálico, podem ser alterados por factores externos, tais como patogénios, ou por acontecimentos fisiológicos celulares específicos. Normalmente em posição terminal, as glico-estruturas que contêm ácido siálico assumem um papel fundamental numa quantidade substancial de receptores imunes envolvidos na adesividade e tráfico celular, tal como as Selectinas e as Siglecs, das quais se sabe apresentarem uma relevante função imune. À altura do início desta tese, era sabido que os ácidos siálicos expressos à superfície das células poderiam modular mecanismos importantes nas respostas imunes adaptativas. Considerando a posição de charneira que as células dendríticas (DCs) ocupam na transição da resposta imune inata para a adaptativa, antecipámos que os ácidos siálicos poderiam também modular mecanismos relevantes nas DCs humanas. As DCs têm uma função muito relevante na verificação e captura antigénica, migração para os gânglios linfáticos e apresentação antigénica aos linfócitos, uma sequência de funções que conduz, em ultima instância, à indução da resposta inata adaptativa. Considerando estas premissas, a nossa hipótese principal foi que os ácidos siálicos podem influenciar funções relevantes das DCs, tais como captura de antigénios, maturação, migração para os gânglios linfáticos e apresentação antigénica às células Para testar esta hipótese, dividimos o trabalho em quatro partes: 1) Analisámos os glicanos sialilados de superfície, expressos durante a diferenciação de monócitos humanos em DCs (moDCs). Os nossos dados mostraram que a expressão dos glicanos com ligações em O (O-glicanos) e sialilados em α2,3, assim como glicanos com ligações em N (N-glicanos) sialilados em α2,6 e α2,3 aumentou durante o processo de diferenciação das moDCs. Contribuindo para esta nova configuração glicosídica, três sialiltransferases (STs) poderão estar envolvidas: a ST6Gal-1 correlaciona-se com a expressão aumentada de N-glicanos sialilados em α2,6; a ST3Gal-1 contribui para a sialilação em α2,3 de O-glicanos, em especial de antigénios T; e a ST3Gal-4 poderá ser responsável pelo aumento de N-glicanos sialilados em α2,3. Após estímulo e consequente maturação das moDCs, ambos os níveis de expressão génica de ST6Gal-1 e ST3Gal-4 são negativamente modificados sendo, também, que a expressão de ST3Gal-1 varia consoante o estímulo. 2) Estudámos posteriormente as consequências da modulação dos ácidos siálicos de superfície nas funções das DCs. Observámos que a remoção dos ácidos siálicos de superfície diminui significativamente a capacidade de macropinocitose e endocitose mediada por receptores nas moDCs. Em contrapartida, o tratamento com sialidase aumentou significativamente a capacidade das moDCs para fagocitar Escherichia coli. Determinou-se também que este mecanismo requer a existência de ácido siálico presente nas E. coli indicando um mecanismo de interacção hospedeiro-patogénio dependente de ácido siálico em ambas as partes envolvidas. As moDCs tratadas com sialidase também apresentam um nível superior de expressão de moléculas de MHC e moléculas co-estimulatórias, sugerindo um fenótipo celular mais maduro. Recorrendo ao modelo de ratinho, utilizaram-se DCs derivadas de células da medula (BMDCs) de ratinhos deficientes em ST3Gal-1 e ST6Gal-1. Estes ensaios revelaram que quer a endocitose quer a maturação são influenciadas por modificações 37 nos glicanos sialilados em α2,3 ou α2,6. A detecção e quantificação de proteínas Nglicosiladas e sialiladas em α2,6 apontou para um potencial envolvimento de integrinas β2 nestes mecanismos. 3) O efeito da sialilação em α2,6 na migração das DCs para os gânglios linfáticos foi também analisado. Observámos que BMDCs deficientes para ST6Gal-1 apresentam uma redução de cerca de 50% nos níveis de migração das DCs para os gânglios linfáticos, tal como aferido em ensaios de inflamação in situ e estudos de transferência adoptiva de células. Uma redução dos níveis deste tipo de migração foi também observada quando BMDCs nativas foram transferidas para ratinhos receptores deficientes em ST6Gal-1. São, contudo, necessários mais ensaios de forma a identificar as moléculas envolvidas neste processo. 4) Por último, analisámos o impacto da sialilação na estimulação antigénica das DCs às células T. Assim, concluiu-se que moDCs tratadas com sialidase apresentam um nível de expressão superior de IL-12, TNF-ɑ, IL-6 e IL-10, e activação do factor de transcrição nuclear kappa B (NF-κB). As DCs tratadas com sialidase induziram uma maior proliferação nas células T, com expressão correspondente de interferão-γ. Este dado sugere que a remoção de ácidos siálicos de superfície contribui para o desenvolvimento de uma resposta pro-inflamatória do tipo 1 por células T auxiliares (resposta Th1). Considerando estes dados no seu todo, concluímos que o ácido siálico tem um papel marcante nas funções imunes das DCs. Alterações à concentração de ácido siálico à superfície das células podem alterar a endocitose/fagocitose, maturação, migração para os tecidos e gânglios linfáticos e capacidade estimulatória para com as células T. Complementando estes dados, as ligações glicosídicas de ácidos siálicos criados por ST6Gal-1 e ST3Gal-1 são funcionalmente relevantes. A modulação programada da sialilação do glicocálice, mediada por sialidases individuais ou sialiltransferases é uma possibilidade aceitável para a melhoria da fagocitose por DCs e da sua potência imunológica. Este facto tem um significado particular para imunoterapias baseadas em DCs, podendo provar-se decisivo para a sua eficiência e aplicabilidade num futuro muito próximo.-------------------------------ABSTRACT: Glycans decorating cell surface and secreted proteins and lipids occupy the junction where critical host–host and host-pathogen interactions occur. In spite of the wide acceptance that glycans are centrally implicated in immunity, exactly how glycans and their variety and variability contribute to the overall immune response remains poorly defined. Glycans, frequently terminated by sialic acid residues, may be modified by external factors such as pathogens or upon specific physiological cellular events. The terminal, privileged positions of sialic acid-modified structures makes them key, fundamental determinants for a number of immune receptors with known involvement in cellular adhesiveness and cell trafficking, such as Selectins and Siglecs, with known relevant immune functions. At the time this thesis was initiated, it was established that sialic acids expressed at cell surface could modulate important mechanisms of the adaptive immune responses. Given the key role of dendritic cells (DCs) in the transition from innate to the adaptive immune responses, we anticipated that sialic acids could also modulate important mechanisms of human DCs. DCs have a relevant role in antigen screening and uptake, migration to lymph nodes and antigen presentation to lymphocytes, ultimately triggering the adaptive immune response. Therefore, our primary hypothesis was that sialic acids may modulate DC functions, such as antigen uptake, maturation, homing to lymph nodes and antigen presentation to T cells. To test this hypothesis, we divided our work in four parts. 1) Surface sialylated glycans expressed during differentiation from human monocytes to DCs (moDCs) were analyzed. Our data showed that α2,3-sialylated O-glycans and α2,6- and α2,3-sialylated N-glycans expression increased during moDC differentiation. Three main sialyltransferases (STs) are committed with this new glycan configuration: ST6Gal- 1 correlates with the increased expression of α2,6-sialylated N-glycans; ST3Gal-1 32 contributes for the α2,3-sialylation of O-glycans, especially T antigens; and ST3Gal-4 may contribute for the increased α2,3-sialylated N-glycans. Upon moDC maturation, ST6Gal-1 and ST3Gal-4 are downregulated and ST3Gal-1 is altered in a stimulus dependent manner. 2) We subsequently analyzed the consequences of the modulation of cell surface sialic acids in DC functions. We observed that removing surface sialic acid by sialidase significantly decreased the capacity of moDCs to micropinocytose and receptormediated endocytose. In contrast, treatment with a sialidase significantly improved the capacity of moDCs to phagocytose Escherichia coli. The improved phagocytosis mechanism required E. coli sialic acids, indicating a mechanism of host–pathogen interaction dependent on sialic acid moieties. Sialidase-treated moDCs have increased expression of MHC and co-stimulatory molecules, suggesting a more mature phenotype. Experiments using mouse bone marrow-derived DCs (BMDCs) from ST3Gal-1-/- and ST6Gal-1-/- strains indicated that endocytosis and maturation are influenced by changes in either α2,3 or α2,6-sialylated glycans. The analysis of α2,6-sialylated, N-glycosylated proteins, strongly suggested the potential involvement of β2 integrins, underlying these mechanisms. 3) The effect of α2,6-sialylation in DC homing to lymph nodes was also analyzed. We observed that BMDCs deficient for ST6Gal-1 have an almost 50% reduction in DC homing, as assayed by in situ inflammation and adoptive transfer studies. A reduction in DC homing was also observed when wild type BMDCs were transferred into ST6Gal-1-/- recipient mice. Further investigations are necessary to identify the molecules involved in this process. 4) Finally, we also analyzed the impact of sialylation on DCs ability to prime T cells. Sialidase-treated moDCs show increased gene expression of IL-12, TNF-α, IL-6 and IL- 10 cytokines, and activation of the transcription factor nuclear factor-κB. Sialidase33 treated DCs induced a higher proliferative response of T cells with concomitant higher expression of interferon-γ, suggesting that the clearance of cell surface sialic acids contributes to the development of a T helper type 1 proinflammatory response. Together, our data strongly support sialic acid’s relevance in DC immune functions. Alterations of cell surface sialic acid content can alter the endocytosis/phagocytosis, maturation, migration/homing and the ability for T cell priming in human DCs. Moreover, sialic acid linkages created by ST6Gal-1 and ST3Gal-1 are functionally relevant. The engineering of cell surface sialylation, mediated by individual sialidases or sialyltransferases is a likely possibility to fine tune DC phagocytosis and immunological potency, with particular significance to DC-based therapies.

Photochemical synthesis and functional transformations of bicyclic vinyl aziridines

Aziridines, a class of organic compounds containing a three membered heterocycle with a nitrogen atom, are extremely valuable molecules in organic and medicinal chemistry. They are frequently used as versatile precursors in the synthesis of natural products, and many biologically active molecules possess the aziridine moiety. The reactivity of aziridines has been studied, for example, in ring-opening reactions with thiols. However, not much interest seems to be given to reactions of aziridines in aqueous media, despite the numberless advantages of using water as solvent in organic chemistry. The nucleophilic ring-opening reaction of aziridines in aqueous media was here explored. Following the Kaplan aziridine synthetic methodology, in which pyridinium salts undergo a photochemical transformation to give bicyclic vinyl aziridines, new aziridines were synthetized. Their nucleophilic ring-opening reaction in water under physiological conditions was investigated and a range of sulphur, nitrogen, carbon and oxygen nucleophiles tested. Thiols, anilines and azide proved to be good nucleophiles to react with the aziridines, giving the ring-opening product in moderate to good yields. The best results were obtained with thiols, more specifically with cysteine-derived nucleophiles. Preliminary results show that these bicyclic vinyl aziridines can modify calcitonin, a peptide containing two cysteine amino acids residues, grating them the potential to be used in bioconjugation as ligands to cysteine-containing proteins, or even as enzyme inhibitors of, for example, cysteine proteases. Additionally, exploratory investigations suggest that the separation of both enantiomers of the bicyclic vinyl aziridine can be performed by taking advantage of an enzymatic methodology for the resolution of racemic secondary alcohols. Both enantiomers would be highly valuable as precursors in the synthesis of enantiomerically pure molecules, as no other method is currently reported for their separation.

Lightweight concrete masonry units based on processed granulate of corn cob as aggregate

A research work was performed in order to assess the potential application of processed granulate of corn cob (PCC) as an alternative lightweight aggregate for the manufacturing process of lightweight concrete masonry units (CMU). Therefore, CMU-PCC were prepared in a factory using a typical lightweight concrete mixture for non-structural purposes. Additionally, lightweight concrete masonry units based on a currently applied lightweight aggregate such as expanded clay (CMU-EC) were also manufactured. An experimental work allowed achieving a set of results that suggest that the proposed building product presents interesting material properties within the masonry wall context. Therefore, this unit is promising for both interior and exterior applications. This conclusion is even more relevant considering that corn cob is an agricultural waste product.

The residual effect of deltametrine in the control of Malaria as observed on fifferent types Of walls In the Brazilian Amazon 1

The residual power of deltametrine FW (25 mg 1 .a/m2) was evaluated and compared to that of DDT (2 g i.a./m2) by means of biological tests. The different kinds of material used in constructing houses in Amazonia, such as: masonry, wood, and wattle and daub, were used. Data from logistic regression showed that the drop in mortality, the inclination of the curve in relation to time, was similar for the two insecticides in the first samples. The negative coeficient for the variable, months after application, confirmed a reduction in the activity of both insecticides. Wooden and wattle walls showed positive and negative coeficiencies respectively from the beginning. The wooden walls retained a residual effect but the wattle walls were shown to be the least indicated for the application of insecticides The experiments demonstrated a more prolonged residual effect for deltametrine as compared to DDT, and that insecticides work better on brick and cement and wooden walls than they do on wattle and daub constructions. For these reasons, it would be necessary to spray brick and cement walls every 8 months, wooden ones every 9 months and wattle constructions every 7 months to control the vectors of malaria.

Seismic behaviour of traditional timber frame walls: experimental results on unreinforced walls

Timber frame buildings are well known as an efficient seismic resistant structure and they are used worldwide. Moreover, they have been specifically adopted in codes and regulations during the XVIII and XIX centuries in the Mediterranean area. These structures generally consist of exterior masonry walls with timber elements embedded which tie the walls together and internal walls which have a timber frame with masonry infill and act as shearwalls. In order to preserve these structureswhich characterizemany cities in theworld it is important to better understand their behaviour under seismic actions. Furthermore, historic technologies could be used even in modern constructions to build seismic resistant buildings using more natural materials with lesser costs. Generally, different types of infill could be applied to timber frame walls depending on the country, among which brick masonry, rubble masonry, hay and mud. The focus of this paper is to study the seismic behaviour of the walls considering different types of infill, specifically: masonry infill, lath and plaster and timber frame with no infill. Static cyclic tests have been performed on unreinforced timber frame walls in order to study their seismic capacity in terms of strength, stiffness, ductility and energy dissipation. The tests showed how in the unreinforced condition, the infill is able to guarantee a greater stiffness, ductility and ultimate capacity of the wall.

Masonry components

Masonry is a non-homogeneous material, composed of units and mortar, which can be of different types, with distinct mechanical properties. The design of both masonry units and mortar is based on the role of the walls in the building. Load-bearing walls relate to structural elements that bear mainly vertical loads, but can serve also to resist to horizontal loads. When a structural masonry building is submitted to in-plane and out-of-plane loadings induced by an earthquake for example, the masonry walls are the structural elements that ensure the global stability of the building. This means that the walls should have adequate mechanical properties that enable them to resist to different combinations of compressive, shear and tensile stresses.The boundary conditions influence the resisting mechanisms of the structural walls under in-plane loading and in a buildings the connection at the intersection walls are of paramount importance for the out-of-plane resisting mechanism. However, it is well established that the masonry mechanical properties are also relevant for the global mechanical performance of the structural masonry walls. Masonry units for load-bearing walls are usually laid so that their perforations are vertically oriented, whereas for partition walls, brick units with horizontal perforation are mostly adopted.

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

An evaluation of fibrous structure and physical characteristics of Cutia nut (Couepia edulis Prance) shell

The Cutia-nut (Couepia edulis Prance), a species originally from the Amazon region, has a kernel with reasonable nutritional value and a hard and thick woody shell that constitute most of the fruit. After the kernel removal, the shells are regarded as waste. The possibility of using such shells, as raw material for burning or charcoal production, as well as milled residue for structural reinforcement materials is quite feasible, considering environmental and economical aspects. There is, however, a complete lack of characterization of the Cutia-nut shell and other similar species which can aggregate desirable qualities for application as engineering material. In this study some analyses are presented aiming at providing information for potential uses of these residues. In general, the shells follow a regular shape with certain dimensional proportionality to the kernel. The shell is a fibrous material with high lignin content, present low water absorption and high resistance to natural degradation.

Sustentabilidade no Design: uma abordagem aos resíduos limpos das indústrias do calçado

Dissertação de mestrado em Design e Marketing