Análise térmica do processo de retificação plana sob diferentes condições de lubrificação utilizando técnicas de transferência de calor reversa

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Transferência de calor inversa do método convencional e do otimizado de lubri-refrigeração na retificação plana tangencial

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Desenvolvimento de biossensor eletroquímico para diagnóstico de dengue

Pós-graduação em Biotecnologia - IQ

Influência da ingestão do triptofano dietético sobre a preferência na escolha do macho pela fêmea, auto-balanceamento da dieta e desempenho zootécnico em tilápia-do-Nilo e Pirapitinga

Pós-graduação em Aquicultura - FCAV

Desenvolvimento de imunossensor impedimétrico para detecção do corante disperso Red 1

Pós-graduação em Química - IQ

Combined photoelectrocatalytic/electro-Fenton process using a Pt/TiO2NTs photoanode for enhanced degradation of an azo dye: A mechanistic study

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Controle de velocidade de um motor de indução trifásico usando técnicas de ajuste empírico para bancada de teste no laboratório de automação

This work aims to make the closed loop control of a three phase induction motor, through the integration of the following equipment: a frequency inverter, the actuator system; a programmable logic controller (PLC), the controller; an encoder, the velocity sensor, used as a feedback monitoring the control variable and the three-phase induction motor, the plant to be controlled. The control is performed using a Proportional - Integrative - Derivative (PID) approach. The PLC has a help instruction, which performs the auto adjustment of the controller, that instruction is used and confronted with other adjustment methods. There are several types of methods adjustments to the PID controllers, where the empirical methods are addressed in this work. The system is deployed at the Interface and Electro Electronic Control laboratory in the Universidade Estadual Paulista Júlio Mesquita Filho, Guaratinguetá, São Paulo, then, in the future, this work becomes an experiment to be conducted in the classroom, allowing undergraduate students to develop a greater affinity to the programs used by the PLC as well as studies of undergraduate and graduate works with the help of assembly made

Avaliação da auto-suficiência energética em reatores anaeróbios aplicados ao tratamento de resíduos da indústria de produção do etanol

Ethanol, the main automotive biofuel, has its production based on the fermentation of sugars found in biological materials and on the distillation of the alcoholic media formed during the fermentative process. Stillage is the main residue from ethanol production, containing a high organic loading in addition to acidic and corrosive characteristics. Considering the available technologies to treat stillage, we highlight anaerobic digestion, which allows the reduction of the impacts associated to pollutants loading of this effluent and the generation of energy from the methane gas produced in the process. Based on the high treatment efficiency usually associated to the anaerobic process, this work aimed to assess whether anaerobic systems applied to the treatment of stillage are energetically self-sufficient. First we evaluated the energy recovery capacity in an anaerobic reactor applied to the treatment of stillage resulting from corn-to-ethanol processing. The results indicated the great influence that a correct selection of electrical equipment and their respective operating periods have on the net energy balance of the anaerobic treatment. The high energy consumption of the heater would not allow the system to achieve a positive net energy balance – the maximum energy recovery would reach only 0.68% of the consumption. However, the replacement of the mixture equipment would result in energy gains ranging from 8.5 to 967.9% of the consumption. In this work we also assessed the efficiency of methane yields for a few studies and the correlation between some parameters of the anaerobic process. With respect to the methane yield, we noted that mesophilic systems tend to be more advantageous than the thermophilic ones (efficiency of 76.45 ± 22.51% vs. 69.40 ± 30.36%). Considering the study... (Complete abstract click electronic access below)

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e água cinza

The anaerobic treatment of sewage is widely employed in Brazil and it is an appreciated way for the treatment of effluents, helping to reduce the environmental impact in rivers. The methane gas obtained from the process can be applied to improve the energetic efficiency of the system, reducing the amount of waste and the cost of the treatment process. This work presents the net energy balance of anaerobic reactors applied to the treatment of sewage. The analysis was performed considering full-scale and laboratory-scale treatment systems. In laboratory scale, the results from three kinds of systems were compared regarding the biological treatment of greywater. Two of them (UASB7 and UASB12) were anaerobic and the other one was a combined anaerobic-aerobic system (UASB7/SBR6). Greywater methanization (compared to theoretical maximum) was calculated considering 100% removal (g BOD/day), the literature percentage removal and the anionic surfactant presence in the effluentt. For each of these three cases, the efficiencies were, respectively, 16.9%, 43.6% and 51.3% in UASB7 reactor, 25.6%, 50.3% and 59.2% in UASB12 reactor and 30.6%, 61.2% and 71.9% in UASB7/SBR6 reactor. The energetic potential was found to be 4.66x10-4, 7.77x10-4 and 5.12x10-4 kWh/L for the UASB7, UASB12 and UASB7/SBR6 reactors, respectively. The pumping system, the aeration (in the anaerobic-aerobic system) and the temperature controlled heating system were considered to calculate the energetic consumption. However, the third one was not employed since tropical regions like Brazil do not need heating systems and also because of its high energetic consumption. The calculated net energy balance in the reactors was negative in the case of greywater, respectively -0.16, -0.28 and -0.18 kWh/L for the reactors UASB7, UASB12 and UASB7/SRB6. In full scale (ETE Jardim das Flores - Rio Claro, SP), the average energy... (Complete abstract click electronic access below)

Auto-ecologia de Geonoma gamiova Barb. Rodr. (Arecaceae) em mata ombrófila densa montana (Parque Estadual Carlos Botelho, SP)

Geonoma é um dos mais complexos gêneros de palmeiras neotropicais e possui aproximadamente 80 espécies distribuídas nos Neotrópicos. Espécies desse gênero apresentam pequeno a médio porte e são típicas de sub-bosque de florestas em áreas com grande pluviosidade. Este trabalho teve como objetivo analisar a auto-ecologia de Geonoma gamiova em duas escalas espaciais, relacionando sua estrutura populacional entre hábitats (fundo de vale x encosta) e microsítios (local de ocorrência clonal). O trabalho foi realizado no núcleo São Miguel Arcanjo do Parque Estadual Carlos Botelho que possui uma área de 37.794 ha e uma amplitude altitudinal de 50 a 975 metros. A área apresenta relevo de montanhas com vales profundos e morros paralelos e a vegetação presente no Parque é a Floresta Ombrófila Densa. Foram distribuídas 30 parcelas de 5 x 20m em três trilhas no Parque, onde foram quantificados os indivíduos de Geonoma gamiova em três estágios de desenvolvimento e foi caracterizado o hábitat. Foram marcados 42 indivíduos de Geonoma gamiova para avaliar o crescimento vegetativo e sua ecologia reprodutiva, avaliando-se também a estrutura dos microsítios em que esses indivíduos se encontravam. Os indivíduos apresentaram uma distribuição de tamanho populacional em forma de J invertido. Geonoma gamiova foi a segunda palmeira mais abundante na área estudada. O tamanho das moitas foi maior no fundo de vale, porém, os parâmetros mensurados para verificar a estrutura de comunidade, assim como a abundância dos indivíduos de G. gamiova não apresentaram diferença significativa (p > 0,05) entre os hábitats. Não houve nenhuma correlação significativa (p > 0,05) entre o número de estipes por moita e as variáveis microclimáticas e edáficas mensuradas. O crescimento dos estipes, avaliado pelo aumento do número de nós, apresentou diferença significativa, sendo maior.... (Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e de água preta

The purpose of this project is to verify whether anaerobic reactors applied to sewage treatment are energetically self-sufficient. This evaluation can be made by balancing the methane produced through the anaerobic transformation stages (hydrolysis, acidogenesis, acetogenesis and methanogenesis) and the reactor energy consumption requirements. The original project included methanogenic activity tests, which could not be performed due to setbacks in the installation of an analytical instrument. Scientific articles about bench- and full-scale anaerobic reactors were investigated instead. An average substrate-to-methane conversion efficiency of 58,2±18,6% was found for the bench-scale reactors and higher efficiencies (89,2%) were found for the cases which had higher Organic Loading Rates (OLRs) values. The average energy output was 0,013 kWh/Lsewage, value unable to meet the energy needs for the reactor operation, considering equipments normally used such as temperature controller. This balance can become positive if few hypotheses are made, for example (i) to eliminate the use of temperature controller (ii) to alter the operation pattern from continuous to intermittent. Based on energy balance assessment of eight bench-scale reactors, it was observed that the implementation of a system for biogas utilization is not energetically feasible. However, interesting results were found for a full-scale sewage treatment plant, ETE Ouro Verde – Foz do Iguaçu, PR, Brazil. Even though its substrate-tomethane conversion efficiency was about 10% only, the energy balance was quite positive, with energy consumption of 68 kWh/month and energy production of 660 kWh/month. This analysis leads us to conclude that energy recovery from full-scale sewage treatment plants should be practiced by other plants

Análise dos efeitos das deformações estruturais sobre a transferência transversal de carga em um veículo do tipo fórmula SAE submetido a uma aceleração lateral constante

This paper studies the frame deformations on a formula SAE vehicle in steady-state cornering and its influence on the lateral load transfers and, consequently, on the tires normal loads due to the applied lateral load. For a vehicle with a perfect rigid frame, the vehicle mass, the position of the center of gravity and the suspensions are the only factors responsible for the load distribution between the tires. When the frame deformations are no longer negligible, the frame deformations affect the loaddistribution between the tires. The frame flexibility turns it able to behave as an additional set of springs to the suspension system, thus changing the behavior of the set. This paper describes howit happens and suggests ways to minimize this phenomenon

Avaliação da auto-suficiência energética de reatores anaeróbicos aplicados ao tratamento de resíduos de uma cervejaria em escala piloto

This project aimed to analyze the feasibility of the methane yield associated to the anaerobic digestion of brewery residues, checking whether the energetic balance of the system is favorable. The methane yield efficiency was calculated for the parameters of two papers that treated solids with a particle-size <1mm. Theses solids are not degraded in conventional treatment systems. Calculations were based in the reactions of anaerobic degradation of the macromolecules that compose brewery residues, considering the theoretical production and the effective production of methane. The results were 50.44% and 52.86%. Regarding to the energy balance of the anaerobic treatment, we noted the high influence of the selection and operating regime of electrical equipment over the potential energy. The best situation, in which the energetic self-sufficiency was reached, was observed when using the mixer under an intermittent regime (1min/h), without employing the heating recirculator, for the maximum organic loading of 4.0 gVS/L.day (days 248-258). In this case, the system would generate an amount of energy equal to 0.0356 kWh/day, able to overcome the energy required by the equipment in about 6.5 times. Moreover, we also noted the interference of the application of different solid loadings in the reactors, once the application of the higher organic load generated 5 times more energy than the application of the smaller one

Percepção dos portadores de hanseníase acerca do auto cuidado

This study aimed at evaluating the perception of leprosy patients, the disease, with regard to its concept and self-care practice, as well as their knowledge concerning drug therapy. Fifteen patients participated in the study, of whom 11 were classified as multibacillary and 04 as paucibacillary. Semi-structure interviews containing six guiding questions were used for data collection, and the Collective Subject Discourse (CSD) was utilized as a theoretical framework. Analysis was performed based on the Theory of Complexity. It showed that patients suffer pain, a fact that is reflected on the need to change habits and prevent disability. It also showed that patients have doubts and feel insecure about treatment and prognosis, and that they are also the target of social prejudice even thought the term leprosy has been replaced by Hansen‟s disease. As regards self-care, the subjects showed lack of autonomy, limitations and subjection to instructions from health care professionals, who, according to the discourse that emerged, are mostly responsible for transmitting the knowledge concerning self-care practice. This fact can be explained by evidence of self-knowledge deficit by the the subjects. Concerning polychemotherapy treatment, which is recommended by the Ministry of Health, it was observed that the knowledge concerning its action and adverse effects is precarious. This information is provided during consultation; however, CSD showed that the subjects do not apprehend it. Therefore, health care professionals must instruct their clients not only as regards conventional treatment practices, but they must also help them to know themselves and to improve their critical judgment so that they can choose the best form of living after being diagnosed with the disease, thus guiding self-care by taking such choice into account

Análise da supressão do fenótipo de sensibilidade a temperatura do mutante tif51A Q22H/L93F em Saccharomyces cerevisiae

O fator de início da tradução de eucariotos eIF5A é uma proteína essencial para a viabilidade celular, altamente conservada em arqueas e em eucariotos e apresenta uma modificação pós-traducional única em que um resíduo específico de lisina é modificado para o aminoácido hipusina. O processo de hipusinação é essencial para a função de eIF5A e consequentemente para a viabilidade celular. eIF5A foi descrita inicialmente como um fator de início da tradução, pois estimula a síntese de metionil-puromicina in vitro, porém, dados recentes de nosso e de outros grupos mostraram um papel para eIF5A na etapa de elongação da tradução. eIF5A é um homólogo estrutural do fator de elongação da tradução P (EF-P) de bactérias. EF-P também estimula a síntese de metionil-puromicina, sendo essencial para viabilidade celular em bactérias, além disso EF-P também apresenta uma modificação pós-traducional semelhante à hipusinação. Recentemente, em nosso laboratório, foi isolado o RNA transportador de alanina (tRNAAla) como supressor do fenótipo de sensibilidade a temperatura do mutante tif51AQ22H/L93F de eIF5A, sugerindo uma possível correlação funcional entre estes fatores. Tendo em vista a homologia estrutural entre eIF5A e EF-P e a possível homologia funcional entre estes fatores, pretende-se entender a relação de eIF5A com o tRNA de alanina e com isso contribuir para a caracterização do papel específico desta proteína na elongação da tradução. Portanto, foram clonados diferentes genes que codificam para diversos tRNA´s (glicina, leucina, prolina, metionina e fenilalanina) para averiguar se a supressão observada para o tRNA de alanina também pode ser vista com estes outros tRNA’s ou se é específica. Considerando-se que eIF5A foi descrita a mais de trinta anos sem que sua função específica fosse caracterizada, este estudo pode contribuir... (Resumo completo, clicar acesso eletrônico abaixo)