Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

Technology selection and group decision support systems: Case studies on supporting strategic technology selection processes

The objective of the dissertation is to increase understanding and knowledge in the field where group decision support system (GDSS) and technology selection research overlap in the strategic sense. The purpose is to develop pragmatic, unique and competent management practices and processes for strategic technology assessment and selection from the whole company's point of view. The combination of the GDSS and technology selection is approached from the points of view of the core competence concept, the lead user -method, and different technology types. In this research the aim is to find out how the GDSS contributes to the technology selection process, what aspects should be considered when selecting technologies to be developed or acquired, and what advantages and restrictions the GDSS has in the selection processes. These research objectives are discussed on the basis of experiences and findings in real life selection meetings. The research has been mainly carried outwith constructive, case study research methods. The study contributes novel ideas to the present knowledge and prior literature on the GDSS and technology selection arena. Academic and pragmatic research has been conducted in four areas: 1) the potential benefits of the group support system with the lead user -method,where the need assessment process is positioned as information gathering for the selection of wireless technology development projects; 2) integrated technology selection and core competencies management processes both in theory and in practice; 3) potential benefits of the group decision support system in the technology selection processes of different technology types; and 4) linkages between technology selection and R&D project selection in innovative product development networks. New type of knowledge and understanding has been created on the practical utilization of the GDSS in technology selection decisions. The study demonstrates that technology selection requires close cooperation between differentdepartments, functions, and strategic business units in order to gather the best knowledge for the decision making. The GDSS is proved to be an effective way to promote communication and co-operation between the selectors. The constructs developed in this study have been tested in many industry fields, for example in information and communication, forest, telecommunication, metal, software, and miscellaneous industries, as well as in non-profit organizations. The pragmatic results in these organizations are some of the most relevant proofs that confirm the scientific contribution of the study, according to the principles of the constructive research approach.

MANAGING STRATEGIC CHANGE:New Business Models Applying Wireless Technology as a Source of Competitive Edge

The diffusion of mobile telephony began in 1971 in Finland, when the first car phones, called ARP1 were taken to use. Technologies changed from ARP to NMT and later to GSM. The main application of the technology, however, was voice transfer. The birth of the Internet created an open public data network and easy access to other types of computer-based services over networks. Telephones had been used as modems, but the development of the cellular technologies enabled automatic access from mobile phones to Internet. Also other wireless technologies, for instance Wireless LANs, were also introduced. Telephony had developed from analog to digital in fixed networks and allowed easy integration of fixed and mobile networks. This development opened a completely new functionality to computers and mobile phones. It also initiated the merger of the information technology (IT) and telecommunication (TC) industries. Despite the arising opportunity for firms' new competition the applications based on the new functionality were rare. Furthermore, technology development combined with innovation can be disruptive to industries. This research focuses on the new technology's impact on competition in the ICT industry through understanding the strategic needs and alternative futures of the industry's customers. The change speed inthe ICT industry is high and therefore it was valuable to integrate the DynamicCapability view of the firm in this research. Dynamic capabilities are an application of the Resource-Based View (RBV) of the firm. As is stated in the literature, strategic positioning complements RBV. This theoretical framework leads theresearch to focus on three areas: customer strategic innovation and business model development, external future analysis, and process development combining these two. The theoretical contribution of the research is in the development of methodology integrating theories of the RBV, dynamic capabilities and strategic positioning. The research approach has been constructive due to the actual managerial problems initiating the study. The requirement for iterative and innovative progress in the research supported the chosen research approach. The study applies known methods in product development, for instance, innovation process in theGroup Decision Support Systems (GDSS) laboratory and Quality Function Deployment (QFD), and combines them with known strategy analysis tools like industry analysis and scenario method. As the main result, the thesis presents the strategic innovation process, where new business concepts are used to describe the alternative resource configurations and scenarios as alternative competitive environments, which can be a new way for firms to achieve competitive advantage in high-velocity markets. In addition to the strategic innovation process as a result, thestudy has also resulted in approximately 250 new innovations for the participating firms, reduced technology uncertainty and helped strategic infrastructural decisions in the firms, and produced a knowledge-bank including data from 43 ICT and 19 paper industry firms between the years 1999 - 2004. The methods presentedin this research are also applicable to other industries.

The effects of potentiallydisruptive technology on business model - a case study of new technologies in ICT industry

This study examines how firms interpret new, potentially disruptive technologies in their own strategic context. The work presents a cross-case analysis of four potentially disruptive technologies or technical operating models: Bluetooth, WLAN, Grid computing and Mobile Peer-to-peer paradigm. The technologies were investigated from the perspective of three mobile operators, a device manufacturer and a software company in the ICT industry. The theoretical background for the study consists of the resource-based view of the firm with dynamic perspective, the theories on the nature of technology and innovations, and the concept of business model. The literature review builds up a propositional framework for estimating the amount of radical change in the companies' business model with two middle variables, the disruptiveness potential of a new technology, and the strategic importance of a new technology to a firm. The data was gathered in group discussion sessions in each company. The results of each case analysis were brought together to evaluate, how firms interpret the potential disruptiveness in terms of changes in product characteristics and added value, technology and market uncertainty, changes in product-market positions, possible competence disruption and changes in value network positions. The results indicate that the perceived disruptiveness in terms ofproduct characteristics does not necessarily translate into strategic importance. In addition, firms did not see the new technologies as a threat in terms of potential competence disruption.

Coping with Technology: A Study on Economic Methodology and Strategic Management of Technology

There is a broad consensus among economists that technologicalchange has been a major contributor to the productivity growth and, hence, to the growth of the material welfare in western industrialized countries at least over the last century. Paradoxically, this issue has not been the focal point of theoretical economics. At the same time, we have witnessed the rise of the importance of technological issues at the strategic management level of business firms. Interestingly, the research has not accurately responded to this challenge either. The tension between the overwhelming empirical evidence of the importance of technology and its relative omission in the research offers a challenging target for a methodological endeavor. This study deals with the question of how different theories cope with technology and explain technological change. The focusis at the firm level and the analysis concentrates on metatheoretical issues, except for the last two chapters, which examine the problems of strategic management of technology. Here the aim is to build a new evolutionary-based theoreticalframework to analyze innovation processes at the firm level. The study consistsof ten chapters. Chapter 1 poses the research problem and contrasts the two basic approaches, neoclassical and evolutionary, to be analyzed. Chapter 2 introduces the methodological framework which is based on the methodology of isolation. Methodological and ontoogical commitments of the rival approaches are revealed and basic questions concerning their ways of theorizing are elaborated. Chapters 3-6 deal with the so-called substantive isolative criteria. The aim is to examine how different approaches cope with such critical issues as inherent uncertainty and complexity of innovative activities (cognitive isolations, chapter 3), theboundedness of rationality of innovating agents (behavioral isolations, chapter4), the multidimensional nature of technology (chapter 5), and governance costsrelated to technology (chapter 6). Chapters 7 and 8 put all these things together and look at the explanatory structures used by the neoclassical and evolutionary approaches in the light of substantive isolations. The last two cpahters of the study utilize the methodological framework and tools to appraise different economics-based candidates in the context of strategic management of technology. The aim is to analyze how different approaches answer the fundamental question: How can firms gain competitive advantages through innovations and how can the rents appropriated from successful innovations be sustained? The last chapter introduces a new evolutionary-based technology management framework. Also the largely omitted issues of entrepreneurship are examined.

Information sharing in R&D collaboration - Context-dependency and means of governance

Tiedon jakaminen ja kommunikointi ovat tärkeitä toimintoja verkostoituneiden yritysten välillä ja ne käsitetäänkin yhteistyösuhteen yhtenä menestystekijänä ja kulmakivenä. Tiedon jakamiseen liittyviä haasteita ovat mm. yrityksen liiketoiminnalle kriittisen tiedon vuotaminen ja liiketoiminnan vaatima tiedon reaaliaikaisuus ja riittävä määrä. Tuotekehitysyhteistyössä haasteellista on tiedon jäsentymättömyys ja sitä kautta lisääntyvä tiedon jakamisen tarve, minkä lisäksi jaettava tieto on usein monimutkaista ja yksityiskohtaista. Lisäksi tuotteiden elinkaaret lyhenevät, ja ulkoistaminen ja yhteistyö ovat yhä kasvavia trendejä liiketoiminnassa. Yhdessä nämä tekijät johtavat siihen, että tiedon jakaminen on haastavaa eritoten verkostoituneiden yritysten välillä. Tässä tutkimuksessa tiedon jakamisen haasteisiin pyrittiin vastaamaan ottamalla lähtökohdaksi tiedon jakamisen tilanneriippuvuuden ymmärtäminen. Työssä vastattiin kahteen pääkysymykseen: Mikä on tiedon jakamisen tilanneriippuvuus ja miten sitä voidaan hallita? Tilanneriippuvuudella tarkoitetaan työssä niitä tekijöitä, jotka vaikuttavat siihen, miten yritys jakaa tietoa tuotekehityskumppaneidensa kanssa. Tiedon jakamisella puolestaan tarkoitetaan yrityksestä toiselle siirrettävää tietoa, jota tarvitaan tuotekehitysprojektin aikana. Työn empiirinen aineisto on kerätty laadullisella tutkimusotteella case- eli tapaustutkimuksena yhdessä telekommunikaatioalan yrityksessä jasen eri liiketoimintayksiköissä. Tutkimusjoukko käsitti 19 tuotekehitys- ja toimittajanhallintatehtävissä toimivaa johtajaa tai päällikköä. Työ nojaa pääasiassa hankintojen johtamisen tutkimuskenttään ja tilanneriippuvuuden selvittämiseksi paneuduttiin erityisesti verkostojen tutkimukseen. Työssä kuvattiin tiedon jakaminen yhtenä verkoston toimintona ja yhteistyöhön liittyvättiedon jakamisen hyödyt, haasteet ja riskit identifioitiin. Tämän lisäksi työssä kehitettiin verkoston tutkimismalleja ja yhdistettiin eri tasoilla tapahtuvaa verkoston tutkimusta. Työssä esitettiin malli verkoston toimintojen tutkimiseksija todettiin, että verkostotutkimusta pitäisi tehdä verkosto, ketju, yrityssuhde- ja yritystasolla. Malliin on myös hyvä yhdistää tuote- ja tehtäväkohtaiset ominaispiirteet. Kirjallisuuskatsauksen perusteella huomattiin, että tiedon jakamista on aiemmin tarkasteltu lähinnä tuote- ja yrityssuhteiden tasolla. Väitöskirjassa esitettiin lisää merkittäviä tekijöitä, jotka vaikuttavat tiedon jakamiseen. Näitä olivat mm. tuotekehitystehtävän luonne, teknologia-alueen kypsyys ja toimittajan kyvykkyys. Tiedon jakamisen luonnetta tarkasteltaessa erotettiin operatiivinen, projektin hallintaan ja tuotekehitykseen liittyvä tieto sekä yleinen, toimittajan hallintaan liittyvä strateginen tieto. Tulosten mukaan erityisesti tuotekehityksen määrittelyvaihe ja tapaamiset kasvotusten korostuivat yhteistyössä. Empirian avulla tutkittiin myös niitä tekijöitä, joilla tiedon jakamista voidaan hallita tilanneriippuvuuteen perustuen, koska aiemmin tiedon jakamisen hallintakeinoja tai menestystekijöitä ei ole liitetty suoranaisesti eri olosuhteisiin. Nämä hallintakeinot jaettiin yhteistyötason- ja tuotekehitysprojektitason tekijöihin. Yksi työn keskeisistä tuloksista on se, että huolimatta tiedon jakamisen haasteista, monet niistä voidaan eliminoida tunnistamalla vallitsevat olosuhteet ja panostamalla tiedon jakamisen hallintakeinoihin. Työn manageriaalinen hyöty koskee erityisesti yrityksiä, jotka suunnittelevat ja tekevät tuotekehitysyhteistyötä yrityskumppaniensa kanssa. Työssä esitellään keinoja tämän haasteellisen tehtäväkentän hallintaan ja todetaan, että yritysten pitäisikin kiinnittää entistä enemmän huomiota tiedon jakamisen ja kommunikaation hallintaan jo tuotekehitysyhteistyötä suunniteltaessa.

Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

Maximizing Benefits in Information Technology Outsourcing

Information Technology (IT) outsourcing has traditionally been seen as a means to acquire newresources and competencies to perform standard tasks at lowered cost. This dissertationchallenges the thought that outsourcing should be limited to non-strategic systems andcomponents, and presents ways to maximize outsourcing enabled benefits while minimizingassociated risks. In this dissertation IT outsourcing is approached as an efficiency improvement and valuecreationprocess rather than a sourcing decision. The study focuses on when and how tooutsource information technology, and presents a new set of critical success factors foroutsourcing project management. In a case study it re-validates the theory-based propositionthat in certain cases and situations it is beneficial to partly outsource also strategic IT systems. The main contribution of this dissertation is the validation of proposal that in companies wherethe level of IT competency is high, managerial support established and planning processes welldefined,it is possible to safely outsource also business critical IT systems. A model describing the critical success factors in such cases is presented based on existing knowledge on the fieldand the results of empirical study. This model further highlights the essence of aligning IT andbusiness strategies, assuming long-term focus on partnering, and the overall target ofoutsourcing to add to the strengths of the company rather than eliminating weaknesses.

Des faux documents d'identité au renseignement forensique : développement d'une approche systématique et transversale du traitement de la donnée forensique à des fins de renseignement criminel

La fabrication, la distribution et l'usage de fausses pièces d'identité constituent une menace pour la sécurité autant publique que privée. Ces faux documents représentent en effet un catalyseur pour une multitude de formes de criminalité, des plus anodines aux formes les plus graves et organisées. La dimension, la complexité, la faible visibilité, ainsi que les caractères répétitif et évolutif de la fraude aux documents d'identité appellent des réponses nouvelles qui vont au-delà d'une approche traditionnelle au cas par cas ou de la stratégie du tout technologique dont la perspective historique révèle l'échec. Ces nouvelles réponses passent par un renforcement de la capacité de comprendre les problèmes criminels que posent la fraude aux documents d'identité et les phénomènes qui l'animent. Cette compréhension est tout bonnement nécessaire pour permettre d'imaginer, d'évaluer et de décider les solutions et mesures les plus appropriées. Elle requière de développer les capacités d'analyse et la fonction de renseignement criminel qui fondent en particulier les modèles d'action de sécurité les plus récents, tels que l'intelligence-led policing ou le problem-oriented policing par exemple. Dans ce contexte, le travail doctoral adopte une position originale en postulant que les fausses pièces d'identité se conçoivent utilement comme la trace matérielle ou le vestige résultant de l'activité de fabrication ou d'altération d'un document d'identité menée par les faussaires. Sur la base de ce postulat fondamental, il est avancé que l'exploitation scientifique, méthodique et systématique de ces traces au travers d'un processus de renseignement forensique permet de générer des connaissances phénoménologiques sur les formes de criminalité qui fabriquent, diffusent ou utilisent les fausses pièces d'identité, connaissances qui s'intègrent et se mettent avantageusement au service du renseignement criminel. A l'appui de l'épreuve de cette thèse de départ et de l'étude plus générale du renseignement forensique, le travail doctoral propose des définitions et des modèles. Il décrit des nouvelles méthodes de profilage et initie la constitution d'un catalogue de formes d'analyses. Il recourt également à des expérimentations et des études de cas. Les résultats obtenus démontrent que le traitement systématique de la donnée forensique apporte une contribution utile et pertinente pour le renseignement criminel stratégique, opérationnel et tactique, ou encore la criminologie. Combiné aux informations disponibles par ailleurs, le renseignement forensique produit est susceptible de soutenir l'action de sécurité dans ses dimensions répressive, proactive, préventive et de contrôle. En particulier, les méthodes de profilage des fausses pièces d'identité proposées permettent de révéler des tendances au travers de jeux de données étendus, d'analyser des modus operandi ou d'inférer une communauté ou différence de source. Ces méthodes appuient des moyens de détection et de suivi des séries, des problèmes et des phénomènes criminels qui s'intègrent dans le cadre de la veille opérationnelle. Ils permettent de regrouper par problèmes les cas isolés, de mettre en évidence les formes organisées de criminalité qui méritent le plus d'attention, ou de produire des connaissances robustes et inédites qui offrent une perception plus profonde de la criminalité. Le travail discute également les difficultés associées à la gestion de données et d'informations propres à différents niveaux de généralité, ou les difficultés relatives à l'implémentation du processus de renseignement forensique dans la pratique. Ce travail doctoral porte en premier lieu sur les fausses pièces d'identité et leur traitement par les protagonistes de l'action de sécurité. Au travers d'une démarche inductive, il procède également à une généralisation qui souligne que les observations ci-dessus ne valent pas uniquement pour le traitement systématique des fausses pièces d'identité, mais pour celui de tout type de trace dès lors qu'un profil en est extrait. Il ressort de ces travaux une définition et une compréhension plus transversales de la notion et de la fonction de renseignement forensique. The production, distribution and use of false identity documents constitute a threat to both public and private security. Fraudulent documents are a catalyser for a multitude of crimes, from the most trivial to the most serious and organised forms. The dimension, complexity, low visibility as well as the repetitive and evolving character of the production and use of false identity documents call for new solutions that go beyond the traditional case-by-case approach, or the technology-focused strategy whose failure is revealed by the historic perspective. These new solutions require to strengthen the ability to understand crime phenomena and crime problems posed by false identity documents. Such an understanding is pivotal in order to be able to imagine, evaluate and decide on the most appropriate measures and responses. Therefore, analysis capacities and crime intelligence functions, which found the most recent policing models such as intelligence-led policing or problem-oriented policing for instance, have to be developed. In this context, the doctoral research work adopts an original position by postulating that false identity documents can be usefully perceived as the material remnant resulting from the criminal activity undertook by forgers, namely the manufacture or the modification of identity documents. Based on this fundamental postulate, it is proposed that a scientific, methodical and systematic processing of these traces through a forensic intelligence approach can generate phenomenological knowledge on the forms of crime that produce, distribute and use false identity documents. Such knowledge should integrate and serve advantageously crime intelligence efforts. In support of this original thesis and of a more general study of forensic intelligence, the doctoral work proposes definitions and models. It describes new profiling methods and initiates the construction of a catalogue of analysis forms. It also leverages experimentations and case studies. Results demonstrate that the systematic processing of forensic data usefully and relevantly contributes to strategic, tactical and operational crime intelligence, and also to criminology. Combined with alternative information available, forensic intelligence may support policing in its repressive, proactive, preventive and control activities. In particular, the proposed profiling methods enable to reveal trends among extended datasets, to analyse modus operandi, or to infer that false identity documents have a common or different source. These methods support the detection and follow-up of crime series, crime problems and phenomena and therefore contribute to crime monitoring efforts. They enable to link and regroup by problems cases that were previously viewed as isolated, to highlight organised forms of crime which deserve greatest attention, and to elicit robust and novel knowledge offering a deeper perception of crime. The doctoral research work discusses also difficulties associated with the management of data and information relating to different levels of generality, or difficulties associated with the implementation in practice of the forensic intelligence process. The doctoral work focuses primarily on false identity documents and their treatment by policing stakeholders. However, through an inductive process, it makes a generalisation which underlines that observations do not only apply to false identity documents but to any kind of trace as soon as a profile is extracted. A more transversal definition and understanding of the concept and function of forensic intelligence therefore derives from the doctoral work.

How diverse is Cologne Carnival? How migrants appropriate popular art spaces

The present article contributes to the ongoing academic debate on migrants' appropriation of artistic and political spaces in Germany. Cologne, one of the largest cities in Germany, is an interesting example of the tension between political discourse centred around multiculturalism and cultural segregation processes. The 'no fool is illegal' carnival organised by asylum seekers shows their capacity to act, as they reinvent an old local tradition by reinterpreting medieval rituals. Today, different groups and associations appropriate this festive art space: migrants, gays and lesbians, feminists and far-left groups either organise their own parties or take part in the official parties and parades as separate groups. As a result, the celebration of diversity figures on the local political agenda and becomes part of the official carnival festivities. This leads to a blurring of boundaries, whereby mainstream popular culture becomes more and more influenced by multicultural elements.

Design and implementation of FPGA-based LQ control of active magnetic bearings

The need for high performance, high precision, and energy saving in rotating machinery demands an alternative solution to traditional bearings. Because of the contactless operation principle, the rotating machines employing active magnetic bearings (AMBs) provide many advantages over the traditional ones. The advantages such as contamination-free operation, low maintenance costs, high rotational speeds, low parasitic losses, programmable stiffness and damping, and vibration insulation come at expense of high cost, and complex technical solution. All these properties make the use of AMBs appropriate primarily for specific and highly demanding applications. High performance and high precision control requires model-based control methods and accurate models of the flexible rotor. In turn, complex models lead to high-order controllers and feature considerable computational burden. Fortunately, in the last few years the advancements in signal processing devices provide new perspective on the real-time control of AMBs. The design and the real-time digital implementation of the high-order LQ controllers, which focus on fast execution times, are the subjects of this work. In particular, the control design and implementation in the field programmable gate array (FPGA) circuits are investigated. The optimal design is guided by the physical constraints of the system for selecting the optimal weighting matrices. The plant model is complemented by augmenting appropriate disturbance models. The compensation of the force-field nonlinearities is proposed for decreasing the uncertainty of the actuator. A disturbance-observer-based unbalance compensation for canceling the magnetic force vibrations or vibrations in the measured positions is presented. The theoretical studies are verified by the practical experiments utilizing a custom-built laboratory test rig. The test rig uses a prototyping control platform developed in the scope of this work. To sum up, the work makes a step in the direction of an embedded single-chip FPGA-based controller of AMBs.

The effect of information and communication technology on global paper consumption

The objective of this thesis is to find out how information and communication technology affects the global consumption of printing and writing papers. Another objective is to find out, whether there are differences between paper grades in these effects. The empirical analysis is conducted by linear regression analysis using three sets of country-level panel data from 1990-2006. Data set of newsprint contains 95 countries, data set of uncoated woodfree paper 61 countries and data set of coated mechanical paper 42 countries. The material is based on paper consumption data of RISI’s Industry Statistics Database and on the information and communication technology data of GMID-database. Results indicate that number of Internet users has statistically significant negative effect on the consumption of newsprint and on the consumption of coated mechanical paper and number of mobile telephone users has positive effect on the consumptions of these papers. Results also indicate that information and communication technologies have only small effect on consumption of uncoated woodfree paper or no significant effect at all, but these results are more uncertain to some extent.

Promoting Metacognitive Skills in a CSCL environment: implications for instructional and technology design

This paper aims to better understand the development of students’ learning processes when participating actively in a specific Computer Supported Collaborative Learning system called KnowCat. To this end, a longitudinal case study was designed, in which eighteen university students took part in a 12-month (two semesters) learning project. During this time period, the students followed an instructional process, using some elements of KnowCat (KnowCat key features) design to support and improve their interaction processes, especially peer learning processes. Our research involved both supervising the students’ collaborative learning processes throughout the learning project and focusing our analysis on the qualitative evolution of the students’ interaction processes and on the development of metacognitive learning processes. The results of the current research reveal that the instructional application of the CSCL-KnowCat system may favour and improve the development of the students’ metacognitive learning processes. Additionally, the implications of the design of computer supported collaborative learning networks and pedagogical issues are discussed in this paper.

End-tidal carbon dioxide monitoring using a naso-buccal sensor is not appropriate to monitor capnia during non-invasive ventilation.

BACKGROUND: In acute respiratory failure, arterial blood gas analysis (ABG) is used to diagnose hypercapnia. Once non-invasive ventilation (NIV) is initiated, ABG should at least be repeated within 1 h to assess PaCO2 response to treatment in order to help detect NIV failure. The main aim of this study was to assess whether measuring end-tidal CO2 (EtCO2) with a dedicated naso-buccal sensor during NIV could predict PaCO2 variation and/or PaCO2 absolute values. The additional aim was to assess whether active or passive prolonged expiratory maneuvers could improve the agreement between expiratory CO2 and PaCO2. METHODS: This is a prospective study in adult patients suffering from acute hypercapnic respiratory failure (PaCO2 ≥ 45 mmHg) treated with NIV. EtCO2 and expiratory CO2 values during active and passive expiratory maneuvers were measured using a dedicated naso-buccal sensor and compared to concomitant PaCO2 values. The agreement between two consecutive values of EtCO2 (delta EtCO2) and two consecutive values of PaCO2 (delta PaCO2) and between PaCO2 and concomitant expiratory CO2 values was assessed using the Bland and Altman method adjusted for the effects of repeated measurements. RESULTS: Fifty-four datasets from a population of 11 patients (8 COPD and 3 non-COPD patients), were included in the analysis. PaCO2 values ranged from 39 to 80 mmHg, and EtCO2 from 12 to 68 mmHg. In the observed agreement between delta EtCO2 and deltaPaCO2, bias was -0.3 mmHg, and limits of agreement were -17.8 and 17.2 mmHg. In agreement between PaCO2 and EtCO2, bias was 14.7 mmHg, and limits of agreement were -6.6 and 36.1 mmHg. Adding active and passive expiration maneuvers did not improve PaCO2 prediction. CONCLUSIONS: During NIV delivered for acute hypercapnic respiratory failure, measuring EtCO2 using a dedicating naso-buccal sensor was inaccurate to predict both PaCO2 and PaCO2 variations over time. Active and passive expiration maneuvers did not improve PaCO2 prediction. TRIAL REGISTRATION: ClinicalTrials.gov: NCT01489150.