Efeito de adições poliméricas na aderência de pastas de cimento a tubos metálicos após ciclagem térmica

Thermal recovery methods, especially steam injection, have been used to produce heavy oils. However, these methods imply that the metallic casing-cement sheath interface is submitted to thermal cycling. As a consequence, cracking may develop due to the thermal expansion mismatch of such materials, which allows the flow of oil and gas through the cement sheath, with environmental and economical consequences. It is therefore important to anticipate interfacial discontinuities that may arise upon Thermal recovery. The present study reports a simple alternative method to measure the shear strength of casing-sheath interfaces using pushthrough geometry, applied to polymer-containing hardened cement slurries. Polyurethane and recycled tire rubber were added to Portland-bases slurries to improve the fracture energy of intrinsically brittle cement. Samples consisting of metallic casing sections surrounded by hardened polymer-cement composites were prepared and mechanically tested. The effect of thermal cycles was investigated to simulate temperature conditions encountered in steam injection recovery. The results showed that the addition of polyurethane significantly improved the shear strength of the casing-sheath interface. The strength values obtained adding 10% BWOC of polyurethane to a Portland-base slurry more than doubled with respect to that of polyurethane-free slurries. Therefore, the use of polyurethane significantly contributes to reduce the damage caused by thermal cycling to cement sheath, improving the safety conditions of oil wells and the recovery of heavy oils

Estudo do efeito do óxido de bário no comportamento de massas para porcelanato

In this work, it is proposed the study of the effect of barium oxide acting as synthetic flow in the behavior of masses for stoneware from the use of raw materials found in the deposits of minerals of the Rio Grande do Norte that it makes use of a great natural potential for the industrialization of the product. The porcelanato is a sophisticated product with excellent final properties being applied as ceramic coating in buildings of high standard of engineering. The raw materials selected for the development of the study had been two types of argilas, two types of feldspatos, dolomita, talco, barium carbonate and silica, being characterized by X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis and thermal analysis. Thus, it is intended to define four formulations using the cited raw materials that will be processed, conformed and sintered in the temperatures of 1150 °C, 1175 °C, 1200 °C, 1225 °C e 1250 °C. From the physical characterizations, chemical and morphologic of the formed formulations, the effect of barium oxide is determined in the physical and mechanical properties of the studied system carrying water absorption tests, linear retraction, apparent porosity, apparent specific mass, compacting curve, flexural strength and microstructural analysis by XRD and SEM. After analyzing the results, indicated that barium oxide acts as a flux of high temperature and as the ordering of structure, where the embedded glass phase has the nucleating effect phase potassium silico-aluminum reacting with free silica which together with the high content of potassium concentrated form a new crystalline phase called microcline. The masses studied with the addition of barium oxide present physical-mechanical properties highly satisfactory in reduced firing temperatures, which implies a saving in energy given off in the production and increased productivity

Efeito da adição de diatomita no comportamento reológico e mecânico de argamassas colantes

The mortar is a type of adhesive products used in large scale in construction, it is a function of its variety and ease of application . Although industrialized product and endowed with technology in its production is very frequent occurrence of the same pathology , which causes frequent damage and losses in the construction industry. Faced with this real market situation , the technical and scientific study of the effects of the addition of diatomite on the rheological and mechanical behavior of adhesive mortars are needed. This work back as a suggestion the use of diatomite as a mineral additive in formulations of adhesive mortars for partial replacement of cellulose based additives . The choice of using this mineral occurs through physical, chemical and rheological properties that justify its use in this product line , and is a raw material abundant in our region and can thus contribute positively to the minimization of direct costs cellulose -based additives . Industrial adhesive mortar used for comparison , was type AC1 . Formulations of adhesive mortar with diatomite held constant dosed quantities of sand, cement and the water / cement (w / c ) , or adhesive mortar formulations were developed with levels 10, 20, 30 and 40% of diatomite substituting part of the cellulose -based additives . These mortars were subjected to the following tests that define and evaluate the rheological and mechanical behavior of this type of mortar. The results attest the best performance of the adhesive mortar type AC1 with partial replacement of 30 % of the cellulose-based additive for diatomite

Efeito da adubação fosfata sobre o acúmulo de biomassa e teor de brix de duas variedades de cana-de-açúcar

The objective of this study was to evaluate the accumulation of matter, dry matter content of Brix and two varieties of sugar cane, influenced by the phosphorus cultivated on "Zona da Mata" region, State of Alagoas. The experiment, a factorial 2 x 6, was composed of two varieties of cane; RB867515 and RB92579 and six phosphorus levels: zero, 30, 60, 90, 120 and 150 kg ha(-1), with the source of the phosphorus triple superphosphate. Was also used nitrogen and potassium in doses equivalent to 100 and 200 kg ha(-1) and K, respectively. The soil of the experimental area was set to raise the base saturation to 60%. At the beginning of the first rainfall of the rainy season of 2006 was performed with micro fertilization in coverage, in doses equivalent to 6,0; 6,0 and 7,0 kg ha(-1) of Cu, Zn and Mn, respectively. Was The chemical control of weeds. Every month, from August to October 2006, samples were collected in the cane plant. There was initially the number of plants m(2), followed by weighing the material. It was subsequently withdrawn a subsample containing ten plants for weighing. After weighing the material was passed in horsemanship and homogenized, again drew up a sample of approximately 300g, leading them to forced ventilation oven at 65 degrees C, toobtain constant weight. Resulting in the production of natural (MN) and dry matter (DM). In July, we analyzed the levels of Brix% juice in the refractometer Brix. The average values of production of natural (MN), dry matter (DM) and contents of Brix% were subjected to analysis of variance and regression for variables. The accumulation of dry matter and were influenced by fertilization. The contents of Brix% in two varieties did not suffer significant influence of fertilization.

Análise da eficiência de aquecedor solar espiral com e sem efeito estufa para piscinas

The technical and economic viability of solar heating for swimming pools is unquestionable, besides there it replaces the high costs and environmental impacts of conventional supply of energy, and it improves an optimization in the pool heating uses. This work applies the principles of the greenhouse effect: advanced thermodynamics, heat retention and equalization of temperature, to optimize the solar heating equipment, reducing the area required by collectors as much as 40% (still estimated value) for commercial collectors, with minor architectural and aesthetic impacts on the environment. It features a solar heating alternative in pools, whose main characteristics: low cost, simplicity in manufacturing and assembly and a faster heating. The system consists of two collectors spiral hoses made of polyethylene with a hundred meters each, and working on a forced flow, with only one pass of the working fluid inside the coils, and is used to pump itself treatment of pool water to obtain the desired flow. One of the collectors will be exposed to direct solar radiation, and the other will be covered by a glass slide and closed laterally, so providing the greenhouse effect. The equipment will be installed in parallel and simultaneously exposed to the sun in order to obtain comparative data on their effectiveness. Will be presented results of thermal tests for this the two cases, with and without transparent cover. Will be demonstrated, by comparison, the thermal, economic and material feasibility of these systems for heating swimming pools.

Efeito de subdoses de glyphosate sobre a germinação de sementes das cultivares de soja rr e convecional

The aim of this work was to evaluate the quality of seeds of two soybean cultivars CD-216 and CD-212RR, under subdoses of glyphosate (1,3; 2,6; 5,3 and 11,5 g e.a.ha(-1)). The experiments carried out in Laboratory Fisiologoa Plant in the Uniderp, city of Dourados/MS. The experimental design used was in blocks entirely at random, with four repetitions. After soaking, evaluated the following parameters eight days after imbibition: % germination, seedling dry weight, length of root and shoot. Seeds of both cultivars (CD-212RR and CD216) reduce the percentage of germination, with the increasing of glyphosate concentration in soaling, and CD-216 was more sensible to herbicide.

Efeito de glyphosate sobre características produtivas em cultivares de soja transgênica e convencional

The aim of this work was to evaluate the grain yield of two soybean cultivars (CD-216 and CD-212RR, divided into three stages: (i) to evaluate the effect of components of production, of simulated drift of glyphosate throught subdoses (1,3; 2,6; 5,3; 11,5 and 22,5 g e. a. ha(-1)) of two cultivars; (ii) to evaluate the influence of glyphosate (720; 1080; 1440 and 1800 g e. a. ha(-1)) in the transgenic soybean yield The experiments carried out in experimental area in the school farm of Uniderp, city of Dorados, MS ina typical Rhodic Haplustox. The experimental design used was in blocks to perhaps The parameters were: heigh oh the pln\ant, number of pods per plants, number of seeds per pod, masss of 100 grains, grain yield (%) of germination, dry mass of seedling, the lengh of radical and air part. The cultivate CD-212RR was not influenced by the subdoses application of glyphosate. Effect of growth stimulus was not observerd due to application of glyphosate subdoses in both cultivars in field conditions. Doses from 11,25 g e. a. ha(-1) caused60 of phytotoxicity in CD-216, at 28 DAA reduce production by 33%. The height and number of pods per plant of cultivar CD-212RR have been reduced and productivity decrease 21% with the application of 1.800 g e.a.ha(-1) of glyphosate.

Efeito da deriva de Glyphosate sobre algumas características fisiológicas em plantas de eucalipto

This work aims to evaluate the effects of a simulated drift of glyphosate at different doses on some physiological characteristics of Eucalyptus grandis. A completely randomized design with five replications was used, where each pot contained an eucalyptus plant and was considered as one repetition. The plants received doses of glyphosate corresponding to 0, 30, 60, 90 and 120g.ha(-1), in the Scout (R) commercial formulation: The application was performed in three forms: leaves, stem and whole plant (leaf + stem). For foliar application, the stem was covered with plastic tape to avoid being hit by the solution, and leaves with a plastic bag when the stem was spayed. The application was performed by means of a steady spray gun equipped with four XR 11002 tips, with a pressure of 200Kpa and a volume of 2001 ha(-1). Stomatal conductance, transpiration and leaf temperature were measured at 7 days after application (DAA). The eucalypt plants receiving applications in leaves and whole plant showed, at the highest glyphosate dosis (120g.ha(-1)), a transpiration reduced by 22% and an 18% increase of stomatal resistance at 7 DAA. The lowest dose (30g-ha(-1)) applied to the whole plant caused a transpiration stimulation of 18%, and a leaf to air difference in temperature of -1.66 degrees C, while the difference between the highest and lowest dose used was 3.5 degrees C.

Efeito do déficit hídrico na eficiência de herbicidas e nas características bioquímicas de picão-preto

The objective of this work was to evaluate conditions the effectiveness of acetolactate synthase (ALS) and protoporphyrinogen oxidase (PROTOX) inhibitors in the Bidens pilosa control under two water deficit conditions, as well as to determine the influence of water deficit under the contents of soluble carbohydrates and protein of weed. The experimental design was randomized completely design with the treatments, with four replications, setup in a factorial scheme 4x2, with four herbicides (fomesafen lactofen, chlorimuron-ethyl and imazethapyr), and two water conditions (-0.5 MPa and -0.01MPa). At 7, 14, 21 and 28 days after application (DAA), was assessed visually control efficiency of herbicides. For the determination of organic solutes plants were collected at 24, 48, 72 and 96 hours after application (HAA). Herbicides controlled efficiently plants of B. pilosa, except lactofen, whereas the water deficit affected the efficiency of control of all the herbicides. The soluble carbohydrate content increased with the imposition of water deficit, however, herbicides and water deficit further reduction of soluble proteins in plants of B. pilosa.

Efeito do fósforo, fumigação do substrato e fungo micorrízico arbuscular sobre o crescimento de plantas de mamoeiro

Estudou-se o efeito da inoculação com o fungo micorrízico arbuscular (FMA), Glomus macrocarpum, da fumigação do substrato e da adição de fósforo solúvel (60, 120, 240 e 480 mg kg-1 de P no solo) sobre as variáveis altura, número de folhas e diâmetro do caule de plantas de mamoeiro cv. Sunrise Solo.O FMA edoses crescentes de fósforo, isoladamente, exerceram efeitos significativos sobre essas variáveis. Não houve efeito significativo do fator fumigação do substrato. O efeito da inoculação foi mais acentuado no tratamento com adição de 60 mg kg-1 de P no solo. A inoculação com G. macrocarpum reduziu a necessidade de fósforo para o mamoeiro, tanto que as variáveis estudadas em plantas inoculadas na ausência de adubação fosfática não diferiram de plantas não inoculadas em substrato adicionado de mais de 240 mg kg-1 de P no solo.

Efeito da calagem e sulfato de amônio no algodão: II - Concentração de cátions e ânions na solução do solo e absorção de nutrientes pelas plantas

No sistema de semeadura direta, o calcário tem sido aplicado superficialmente para evitar o revolvimento do solo. Os ânions adicionados via adubação nitrogenada podem aumentar a solubilização de sais de cátions básicos do solo graças à formação de pares iônicos. O objetivo deste trabalho foi estudar a dinâmica dos ânions NO3- e SO4(2-) e dos cátions NH4+, Ca2+, Mg2+ e K+ da solução do solo, bem como a absorção de nutrientes pelo algodoeiro submetido a distintas formas de aplicação de calcário e diferentes doses de sulfato de amônio em cobertura, cultivado com a presença de palha na superfície do solo. Utilizou-se um Latossolo Vermelho distroférrico de textura média que foi acomodado em vasos com 15,71 dm³. Plantas de algodão (Gossypium hirsutum) foram cultivadas por 60 dias nas condições de calagem superficial sobre a palha, calagem incorporada a 0-20 cm de profundidade e ausência de correção do solo, com a aplicação de doses de sulfato de amônio equivalentes a 0, 50, 100 e 150 kg ha-1 de N em cobertura. Cápsulas porosas foram instaladas para amostragem e quantificação de nutrientes da solução do solo. A concentração de SO4(2-) da solução do solo foi incrementada pela adubação nitrogenada, independentemente da forma de aplicação do calcário. A curto prazo, a nitrificação do NH4+ aplicado foi favorecida somente com a calagem incorporada, apesar de o N nítrico da solução do solo ter aumentado no final do cultivo do algodão até mesmo no solo não corrigido. As concentrações de Ca, Mg e K da solução do solo foram incrementadas pela adubação de cobertura. O ânion SO4(2-) apresentou maior afinidade do que o NO3- na formação de pares iônicos com os cátions básicos da solução do solo. A adubação nitrogenada proporcionou maior eficiência na absorção de Ca e Mg pelo algodoeiro na condição de calagem incorporada.

Perfil radicular da figueira sob efeito de níveis de adubação orgânica

O presente trabalho objetivou avaliar a distribuição do sistema radicular da figueira 'Roxo de Valinhos' em função da aplicação de níveis de adubação orgânica durante quatro anos. A cultura foi conduzida em Botucatu-SP, no espaçamento de 3 x 2 m, num solo classificado como Nitossolo Vermelho. Os tratamentos corresponderam a níveis crescentes de adubação orgânica com esterco de curral, conforme a recomendação de N para a cultura: testemunha (sem adubação), 25 %; 50 %; 75 %; 100 %; 125 % e 150 % da dose recomendada. A avaliação da distribuição do sistema radicular foi realizada 4 anos após a instalação da cultura, sendo que, de cada planta, foram retiradas quatro amostras a 0-40 cm de distância do tronco, na profundidade de 0-40 cm. As amostras foram submetidas à lavagem e secagem em estufa (65 ºC), para posteriormente avaliar a massa seca das raízes. O sistema radicular mostrou-se mais desenvolvido horizontalmente do que na vertical. O menor peso de raízes foi obtido sem esterco (43,3 g), e o maior, com 150 % da dose de N recomendada (177,7 g).

Efeito de doses de nitrogênio na severidade da murcha-de-curtobacterium em cultivares de feijoeiro comum

Foi avaliada a influência de doses de nitrogênio (N) na severidade da murcha-de curtobacterium do feijoeiro, causada por Curtobacterium flaccumfaciens pv. flaccumfaciens, nas cultivares IAC Pyatã, IPR 88 Uirapuru e SCS 202 Guará, em condições de casa-de-vegetação. Os tratamentos foram a dose recomendada de N e outras 25 e 50 % abaixo e acima desta, empregando-se uréia. O aumento de doses de N influenciou positivamente o progresso da murcha-de-curtobacterium somente na cultivar IAC Carioca Pyatã, incrementou a quantidade de N na parte aérea e não interferiu no peso da matéria seca das plantas de todas as cultivares avaliadas.

Efeito de indutores bióticos e abióticos na atividade de quitinase e peroxidase e no controle da ferrugem causada por Puccinia psidii em eucalipto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de sistemas de manejo na estabilidade de agregados de um Nitossolo Vermelho

Com o objetivo de avaliar o efeito do manejo do solo na estabilidade de agregados de um Nitossolo Vermelho distroférrico, localizado na Fazenda Experimental Lageado da FCA/UNESP, em Botucatu - SP, amostraram-se, em outubro de 2001, três sistemas de manejo de solo: (i) mata (MA), (ii) preparo convencional por 10 anos seguido de semeadura direta por 12 anos (PC/SD) e (iii) preparo convencional por 22 anos (PC), em quatro camadas: 0,0-0,10; 0,10-0,20; 0,20-0,30 e 0,30-0,40 m. O delineamento experimental empregado foi o inteiramente casualizado, com três repetições. As amostragens foram feitas após a cultura do milho (safra 2000-2001). As amostras foram submetidas às análises físicas e químicas, e as médias, comparadas pelo teste de Tukey. O diâmetro médio ponderado dos agregados (DMP), o índice de estabilidade dos agregados (IEA) e a percentagem de agregados em classes de diâmetro médio foram obtidos com os resultados do peneiramento obtidos pelo método por via úmida. O diâmetro médio ponderado e o índice de estabilidade dos agregados foram menores para o preparo convencional do solo. Os três sistemas de manejo apresentaram maior percentagem de agregados com diâmetro entre 7,93 e 2,00 mm. A substituição do preparo convencional pela semeadura direta favoreceu a estabilidade dos agregados do solo. O diâmetro médio ponderado, o índice de estabilidade de agregados e a percentagem de agregados por classe de diâmetro médio evidenciaram diferenças entre os sistemas de manejo do solo.