981 resultados para Aleaciones de aluminio-Tratamiento térmico


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Foram utilizados dez ovinos da raça Corriedale - cinco machos e cinco fêmeas com pesos entre 52,2 e 87,6 kg - com o objetivo de avaliar o efeito da combinação da movimentação do ar (0 e 5,0 m/s) com a temperatura do ar (25, 30 e 40ºC) sobre a temperatura retal (T R, ºC), da epiderme (T E, ºC), da superfície do velo (T V, ºC) e do interior do velo (T I, ºC) e a espessura do velo (E V, cm) e suas relações com o isolamento térmico do velo. A presença de vento não teve efeito sobre as variáveis estudadas, o que sugere que fluxo de ar (<5,0 m/s) paralelo ao eixo corporal do animal tem pouco efeito sobre o isolamento térmico do velo, independentemente da temperatura do ar, que se mostrou altamente correlacionada, de forma positiva, com as temperaturas retal, do velo, do interior do velo e da epiderme. Sob temperaturas inferiores a 30ºC, a transferência de calor através do velo ocorreu via condução e convecção livre, enquanto sob altas temperaturas (>40ºC) o fluxo de calor sensível não foi significativa.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As cultivares Mineiro e Vrockwona do capim-elefante (Pennisetumpurpureun Schum) foram cortadas aos 75 dias de desenvolvimento, ensiladas em tambores metálicos e submetidas a quatro tratamentos: 1. Emurchecimento ao sol por oito horas; 2. Adição de 0,5% de formal ao material seco e picado; 3. Adição de 0,5% de ácido fórmico (85%); e 4. Adição de 0,2% da solução de "Viher" (70% formal + 26% ácido fórmico + 4% água). Quando o tratamento adotado foi o emurchecimento, os teores de carboidratos solúveis foram suficientes para produzir silagens láticas com baixos teores de pH, e ácidos acético e butírico. Na ensilagem das duas cultivares do capim-elefante, cortadas aos 75 dias de desenvolvimento, houve necessidade de se elevar a dose da solução de "Viher" para que se evitasse a obtenção de silagens inferiores.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to determine the plasma concentrations of cortisol, thyroid hormone, lipids metabolites and corporal temperature or lactating Alpine goats submitted to heat stress. Six lactating Alpine goats were allotted randomly in a crossover experimental design for two groups: thermoneutral conditions or thermal stress. An adaptation period of 28 days was followed by Four-periods of 14 days each, when the animals submitted to thermal stress were exposed to the average temperature of 33.84 degrees C; THI of 86.20; BGT of 36.18 and BT of 32.11 degrees C from 8:00 am to 5:00 pm, including simulated solar radiation from 10:00 am to 3:00 pm. There were no differences between the groups in the plasma concentrations of cortisol, thyroid hormones (T-3-triiodothyronine and T-(4) tiroxine), and lipid metabolites (cholesterol and HDL). Rectal temperature was higher during thermal stress when compared to the group of animals in thermoneutral conditions. The goats maintained the thyroid plasma hormone concentrations, when exposed to repealed and intermittent stress, in spite of the occurrence of hypertermia during heat stress.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The experiment was conducted to evaluate pigeon pea (Cajanus cajan) protein in broiler chicks (up to 28 days of age) feeding, as compared to soybean (Glycine mar) protein, In the experiment the effects of temperature and autoclaving on antinutritional factors on pigeon pea meal were studied. Temperatures of 100, 110 e 120 degrees C and times of autoclaving of 10, 20 and 30 minutes were applied using a two-way factorial design, replicated in four times. Underheating and overheating during the process of inactivation of proteases inhibiting were evaluated by ureatic activity and protein solubility analysis, after the grains were dried and ground. After 28 days, the best time of autoclaving was 20 minutes (p<,05) irrespectively of temperature, which lead to a lower feed consuption. There were no histopathological alterations in kidney, liver, pancreas, heart and intestines of the broilers.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effect of electrical discharges without thermic effect and of energy field on Meloidogyne incognita Rara 1 larvae elimination in weir water was tested. on an average, 63,22% of larvae were killed by electrical discharges, in comparison with 53,12% of dead larvae in the control (water that received only ammonium sulphate) as an electrolyte. Water exposed to energy fields presented higher percentages of dead larvae (50,01% for electromagnetic field, 43,78% for variable electric field and 40,48% for static electric field) in comparison with control, represented by water without exposition to any energy field and without ammonium sulphate (34,27%).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, the chemical structure, the microstructure and the surface morphology of two non-ferrous materials used in dental implants (Ti-6Al-4V and Co-Cr-Mo) were studied. This was done by chemical analysis, scanning electron microscopy (SEM), energy disperse spectroscopy (EDS), and strength measurements (HV). Metallographic studies reveal that titanium alloy surface present a fine granular binary phase structure, while cobalt alloy present cast dendrite structures with an intense precipitation of carbides. To correlate the macro and microstructure with the mechanical behavior of the material, microhardness measurements were performed. Using the Vickers hardening method, the Ti-6Al-4V alloy yielded strength mean values smaller than the Co-Cr-Mo alloy. Their values are associated to the chemical composition and to the microstructural distribution of these materials. The Ti-6Al-4V alloy presents hardness similar to dental enamel, which suggests better performance as dental implant.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of the study presented in this article was to analyze the influence of remelting of two odontological alloys: Dentorium and Steeldent, on the mechanical properties and on the chemical composition. For the two alloys, samples, containing 10% and 50% new alloy, were subjected to tensile test, micrography and chemical analysis. The alloys presented similar mechanical properties, except for the elongation, which presented higher values for the Dentorium 50% new alloy. This is due to the smaller carbides formed in this sample. The remelting itself seems not to be responsible for these differences, but they are probably due to the lack of a good control of the casting process. The micrography showed a dendritic column matrix, with carbides in the interdentric region and inside dendritic grain. In the chemical composition was observed few elements percentage change.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An equation based on heat transfer theory was presented to estimate the rate of heat loss from cattle exposed to a tropical environment, specified by the air temperature, humidity, solar radiation, and wind speed. The animals' variables (sweating rate, rectal temperature, respiratory rate, surface temperature, haircoat color, and body weight) were considered together with environmental variables (air temperature and humidity, solar radiation, wind speed, and globe temperature). The equation allows the prediction of (a) the metabolic heat production level necessary to balance heat losses under specified environmental conditions; (b) the combination of environmental factors that provide a determined heat flux between a given animal and its environment.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(η 2-BH 4)(dppm)] (1), [Cu(η 2-BH 4)(dppe)] (2), [Cu(η 2-BH 4)(cis-dppet)] (3) and [Cu(η 2-BH 4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH 4 group to the copper atom and the 31P{ 1H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(η 2-BH 4)(dppe)] (2) > [Cu(η 2-BH 4)(dppm)] (1) > [Cu(η 2-BH 4)(dppb)] (4) > [Cu(η 2-BH 4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO 2) 2, CuO, CuO 2 and Cu as final products.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Radipherpus protheses are a means of treatment for malignant tumor-carrying patients. These protheses are used in cases of brachytherapy or external actinotherapy by contact and allow treating them with high radiation doses that are quickly released from the areas next to tumor, so that the radiations be restricted to the affected region, without the emissions damaging or destroying the soft tissues. Based on these considerations, the present paper was aimed at making literature review on the use of radipherous protheses for the treatment of head and neck neoplasias. © 2006 1995, Editorial Ciencias médicas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Professional-patient relationship and its importance for a good performance and success of the dental treatment must be reflected upon by means of their bioethical aspects. Our study aimed at evaluating dentist-surgeons' knowledge (n=163) in conducting specialization courses at São Paulo State University-UNESP, on these aspects. Out of the people surveyed, 88.1% mentioned that a decision for the treatment should be made by mutual agreement between professionals and patients, however, 26.4% report that patients' or their legal representative's participation in decision-making can cause negative interference. Professionals' acting when patients choose a less suitable treatment, 95.6% try to convince patients that it is not the best choice and persuade them for a better one by keeping the paternalistic model. It was noticed that 20.3% did not know how to relate the importance of professional-patient interaction as regards the dental treatment. It was therefore concluded that many dentist-surgeons are not taking these bioethical aspects into account in clinical practice.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction. Dementia is a chronic and neurodegenerative disease responsible for a progressive decline of cognition and physical capacity. Objective: To verify the effectiviness of three months of physiotherapy intervention on cognitive functions and balance of institutionilized elderly people with dementia. Patients and methods. This study has comprised thirty subjects, divided in two groups: EG (experimental group) and CG (control group). EG was composed by 15 participants with mean age of 71,6 ± 8,5 years and scholarity of 4,7 ± 4,2 years. CG was formed by 15 subjects with mean age of 78,5 ± 7,6 years and scholarity of 2,2 ± 1,8 years. The sample was evaluated by means of the following instruments: Mini-Mental State Examination, Semantic Verbal Fluency test, Clock Drawing test, Berg Balance Scale and Timed Get Up and Go test. The statistical procedures were done by means of Multivariate Analisis of Variance (MANOVA), with significance of 5 % (p < 0,05). Results. The results has shown a heterogeneity of both groups related to age (F = 0,2, p < 0,05) and scholarity (F = 2,6, p < 0,05). MANOVA pointed beneficts of physiotherapy on balance (F = 7,3, p < 0,01) but not on cognitive functions (F = 0,3, p > 0,05). Conclusions. Three months of physiotherapy were effective to improuve physical capacity of institucionilized elderly people with dementia. Neverthless, it was not able to minimize cognitive decline commonly seen on dementia. The question if a prolonged intervention could propitiate cognitive beneficts remains, specially in a more homogeneous groups.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to evaluate: the profile of the surgeon-dentist that undergoes a course in specialization at the Odontology Faculty of Aracatuba/UNESP, Brazil; if they requested informed consent from the patient and/or their legal representative before the realization of procedures, and if the treatment was decided upon with the patient. It was elaborated, validated and applied in questionnaire form, and the data obtained was analyzed by the program EPI-INFO 3.3 The conclusion was, given that surgeon-dentists still do not obtain any type of document before beginning treatment, a large percentage of them are totally vulnerable if submitted to ethical or legal prosecution and that it is necessary to be aware of this aspect.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The biological nitritation/denitritation process in the removal of organic matter and nitrogen in a landfill leachate was studied, using an activated sludge sequencing batch reactor. Treatment cycles were formed by an anoxic and an aerobic phases, in which the conditions for oxidation of the influent N load and the prevalence of nitrite concentration at the end of aerobic treatment cycles were determined, as well as the use of organic matter present in the leachate as a carbon source for denitrifying organisms in the anoxic stage. The removal efficiencies of N-NO 2-at the end of the anoxic process (48h) ranged between 14 and 30%, indicating low availability of biodegradable organic matter in the leachate. As for the accumulation of N-NO 2-at the end of the aerobic phase (48h) of treatment cycles, imbalances were not observed, while 100% removal efficiencies of N and specific nitritation rates from 0.095 to 0.158kgN-NH 3/kgSSV per day were recorded, demonstrating the applicability of simplified nitrification in the treatment of effluents with low C/N ratios.