Selective inhibition of cyclooxygenase-2 by C-phycocyanin, a biliprotein from Spirulina platensis

We report data from two related assay systems (isolated enzyme assays and whole blood assays) that C-phycocyanin a biliprotein from Spirulina platensis is a selective inhibitor of cyclooxygenase-a (COX-2) with a very low IC50 COX-2/IC50 COX-1 ratio (0.04). The extent of inhibition depends on the period of preincubation of phycocyanin with COX-2, but without any effect on the period of preincubation with COX-1. The IC50 value obtained for the inhibition of COX-2 by phycocyanin is much lower (180 nM) as compared to those of celecoxib (255 nM) and rofecoxib (401 nM), the well-known selective COX-2 inhibitors. In the human whole blood assay, phycocyanin very efficiently inhibited COX-2 with an IC50 value of 80 nM. Reduced phycocyanin and phycocyanobilin, the chromophore of phycocyanin are poor inhibitors of COX-2 without COX-2 selectivity. This suggests that apoprotein in phycocyanin plays a key role in the selective inhibition of COX-2. The present study points out that the hepatoprotective, anti-inflammatory, and anti-arthritic properties of phycocyanin reported in the literature may be due, in part, to its selective COX-2 inhibitory property, although its ability to efficiently scavenge free radicals and effectively inhibit lipid peroxidation may also be involved. (C) 2000 Academic Press.

Methods in general model localization

The aim of this study was to evaluate and test methods which could improve local estimates of a general model fitted to a large area. In the first three studies, the intention was to divide the study area into sub-areas that were as homogeneous as possible according to the residuals of the general model, and in the fourth study, the localization was based on the local neighbourhood. According to spatial autocorrelation (SA), points closer together in space are more likely to be similar than those that are farther apart. Local indicators of SA (LISAs) test the similarity of data clusters. A LISA was calculated for every observation in the dataset, and together with the spatial position and residual of the global model, the data were segmented using two different methods: classification and regression trees (CART) and the multiresolution segmentation algorithm (MS) of the eCognition software. The general model was then re-fitted (localized) to the formed sub-areas. In kriging, the SA is modelled with a variogram, and the spatial correlation is a function of the distance (and direction) between the observation and the point of calculation. A general trend is corrected with the residual information of the neighbourhood, whose size is controlled by the number of the nearest neighbours. Nearness is measured as Euclidian distance. With all methods, the root mean square errors (RMSEs) were lower, but with the methods that segmented the study area, the deviance in single localized RMSEs was wide. Therefore, an element capable of controlling the division or localization should be included in the segmentation-localization process. Kriging, on the other hand, provided stable estimates when the number of neighbours was sufficient (over 30), thus offering the best potential for further studies. Even CART could be combined with kriging or non-parametric methods, such as most similar neighbours (MSN).

Reactions of copper(I) aryloxides with phenyl isothiocyanate: steric and ligand control in the oligomerization of [N-phenylimino(aryloxy)methanethiolato]copper(I) complexes

The preparation of five different copper(I) complexes [CuSC(=NPh)(OAr)}L(n)]m (1-5) formed by the insertion of PhNCS into the Cu-OAr bond and the crystal structure analyses of three of them have been carried out. A monomeric species 1 (OAr = 2,6-dimethylphenoxide) is formed in the presence of excess PPh3 (n = 2, m = 1) and crystallizes as triclinic crystals with a = 12.419(4) angstrom, b = 13.298(7) angstrom, c = 15.936(3) angstrom, alpha = 67.09(3)-degrees, beta = 81.63(2)-degrees, gamma = 66.54(3)-degrees, V = 2224(2) angstrom3, and Z = 2. The structure was refined by the least-squares method to final R and R(w) values of 0.038 and 0.044, respectively, for 7186 unique reflections. Copper(I) 2,5-di-tert-butyl-4-methylphenoxide results in the formation of a dimeric species 2 in the presence of P(OMe)3 (n = 1, m = 2), where the coordination around Cu is trigonal. Crystals of 2 were found to be orthorhombic with a = 15.691(2) angstrom, b = 18.216(3) angstrom, c = 39.198(5) angstrom, v = 11204(3) angstrom3, and Z = 8. Least-squares refinement gave final residuals of R = 0.05 and R(w) = 0.057 with 6866 unique reflections. A tetrameric species 3 results when PPh3 is replaced by P(OMe)3 in the coordination sphere of copper(I) 2,6-dimethylphenoxide. It crystallizes in the space group P1BAR with a = 11.681 (1) angstrom, b = 13.373(2) angstrom, c = 20.127(1) angstrom, a = 88.55(l)-degrees, beta = 89.65(l)-degrees, gamma = 69.28(1)-degrees, V = 2940(l) angstrom3, and Z = 2. Least-squares refinement of the structure gave final values of 0.043 and 0.05 for R and R(w) respectively using 12214 unique reflections. In addition, a dimeric species 4 is formed when 1 equiv of PPh3 is added to the copper(I) 4-methylphenoxide, while with an excess of PPh3 a monomeric species 5 is isolated. Some interconversions among these complexes are also reported.

Synthesis, properties and crystal structures of diastereomeric areneruthenium(II) chiral Schiff-base complexes

Diastereomers (SRu,Sc)-1a and (RRu,Sc)-1b, in a ratio of 85: 15 and formulated as [Ru(η-MeC6H4Pri-p)Cl(L*)], have been prepared by treating [{Ru(η-MeC6H4Pri-p)Cl2}2] with the sodium salt of (S)-α-methylbenzylsalicylaldimine (HL*) in tetrahydrofuran at –70 °C. The reaction of 1(1a+1b) with AgClO4 in acetone followed by an addition of PPh3 or 4-methylpyridine (4Me-py) leads to the formation of adducts [Ru(η-MeC6H4Pri-p)(PPh3)(L*)]ClO42[(SRu,Sc)2a, (FRu,Sc)2b] and [Ru(η-MeC6H4Pri-p)(4Me-py)(L*)]ClO43[(SRu,Sc)3a, (RRu,Sc)3b] in the diastereomeric ratios (SRu,Sc) : (RRu,Sc) of 2 : 98 and 76 : 24, respectively. Complex 1 crystallises with equal numbers of 1a and 1b molecules in an asymmetric unit of monoclinic space group P21 with a= 10.854(1), b= 17.090(1), c= 12.808(4)Å, β= 110.51(1)°, and Z= 4. The structure was refined to R= 0.0552 and R′= 0.0530 with 2893 reflections having I[gt-or-equal] 1.5σ(I). The absolute configurations of the chiral centres in the optically pure single crystal of the PPh3 adduct have been obtained from an X-ray study. Crystals of formulation [Ru(η-MeC6H4Pri-p)-(PPh3)(L*)]2[ClO4][PF6]·1.5 CHCl3, obtained in presence of both ClO4 and PF6 anions, belong to the non-centric triclinic space group P1 with a= 10.852(2), b= 14.028(1), c= 15.950(2)Å, α= 91.51(1), β= 105.97(1), γ= 106.11(1)°, and Z= 2. The final residuals were R= 0.0713, R′= 0.0752 with 7283 reflections having I[gt-or-equal] 2.5σ(I). The crystal structures of 1a,1b, and the PPh3 adduct (2b,2b′) consist of a ruthenium(II) centre bonded to a η-p-cymene, a bidentate chelating Schiff base, and a unidentate ligand (Cl or PPh3). The chirooptical properties of the complexes have been studied using 1H NMR and CD spectral data. The presence of a low-energy barrier for the intermediate involved in these reactions, showing both retention as well as inversion of the metal configuration, is discussed.

Magneto-structural correlation in (mu-alkoxo/hydroxo)(mu-carboxylato)dicopper(II) systems: Synthesis, X-ray structure and magnetic properties of aquo(mu-hydroxo) (mu-arylcarboxylato)bis(N,N,N ',N '-tetramethylethane-1,2-diamine)dicopper(II) diperchlorate

Asymmetrically dibridged dicopper(II) complexes, [Cu-2(OH)(O2CC6H4-p-Me)(tmen)(2)(H2O)](ClO4)(2) (1) and [Cu-2(OH)(O2CC6H4-p-OMe)(tmen)(2)(H2O)](ClO4)(2) (2) (tmen = N,N,N',N'-tetramethylethane-1,2-diamine), were prepared and structurally characterized. Complex 1 crystallizes in the monoclinic space group P2(1)/a with a = 17.718(2), b = 9.869(1), c = 19.677(2) Angstrom, beta = 115.16(1)degrees, V = 3114.3(6) Angstrom(3) and Z = 4. The structure was refined to R(wR(2)) = 0.067(0.178). Complex 2 crystallizes in the monoclinic space group P2(1)/a with a = 17.695(3), b = 9.574(4), c = 20.104(2) Angstrom, beta = 114.18(1)degrees, V = 3107(1) Angstrom(3) and Z = 4. The final residuals are R(wR(2)) = 0.067(0.182). The complexes have a [Cu-2(mu-OH)(mu-OH)(mu-O2CAr)](2+) core with tmen Ligands occupying the terminal sites of the core. In addition, one copper is axially bound to a water molecule. The Cu ... Cu distances and the Cu-OH Cu angles in the core are 3.394(1) Angstrom, 124.4(2)degrees for 1 and 3.374(1) Angstrom, 123.3(3)degrees for 2. The complexes show axial X-band EPR spectral features in methanol glass at 77 K giving g(perpendicular to) = 2.02, g(parallel to) = 2.3 (A(parallel to) = 165 x 10(-4) cm(-1)) and a visible band near similar to 630 nm in methanol. The complexes are weakly antiferromagnetic. A theoretical fit of the magnetic susceptibility data in the temperature range 40-295 K gives -J = 10 cm(-1), g = 2.05 for 1 and -J = 10 cm(-1), g = 2.0 for 2. Plots of -2J versus the Cu-OH-Cu angle (phi) in this class of asymmetrically dibridged dicopper(II) complexes having d(x2-y2)-d(x2-y2) magnetic orbitals show a linear magneto-structural correlation: -2J(cm(-1)) = 11.48 phi(deg) - 1373.

Data rectification and detection of trend shifts in jet engine path measurements using median filters and fuzzy logic

Filtering methods are explored for removing noise from data while preserving sharp edges that many indicate a trend shift in gas turbine measurements. Linear filters are found to be have problems with removing noise while preserving features in the signal. The nonlinear hybrid median filter is found to accurately reproduce the root signal from noisy data. Simulated faulty data and fault-free gas path measurement data are passed through median filters and health residuals for the data set are created. The health residual is a scalar norm of the gas path measurement deltas and is used to partition the faulty engine from the healthy engine using fuzzy sets. The fuzzy detection system is developed and tested with noisy data and with filtered data. It is found from tests with simulated fault-free and faulty data that fuzzy trend shift detection based on filtered data is very accurate with no false alarms and negligible missed alarms.

Incremental-angle and angular velocity estimation using a star sensor

A method is described for estimating the incremental angle and angular velocity of a spacecraft using integrated rate parameters with the help of a star sensor alone. The chief advantage of this method is that the measured stars need not be identified, whereas the identification of the stars is necessary in earlier methods. This proposed estimation can be carried out with all of the available measurements by a simple linear Kalman filter, albeit with a time-varying sensitivity matrix. The residuals of estimated angular velocity by the proposed spacecraft incremental-angle and angular velocity estimation method are as accurate as the earlier methods. This method also enables the spacecraft attitude to be reconstructed for mapping the stars into an imaginary unit sphere in the body reference frame, which will preserve the true angular separation of the stars. This will pave the way for identification of the stars using any angular separation or triangle matching techniques applied to even a narrow field of view sensor that is made to sweep the sky. A numerical simulation for inertial as well as Earth pointing spacecraft is carried out to establish the results.

Optimal scheduling of multiple chlorine sources in water distribution systems

The specified range of free chlorine residual (between minimum and maximum) in water distribution systems needs to be maintained to avoid deterioration of the microbial quality of water, control taste and/or odor problems, and hinder formation of carcino-genic disinfection by-products. Multiple water quality sources for providing chlorine input are needed to maintain the chlorine residuals within a specified range throughout the distribution system. The determination of source dosage (i.e., chlorine concentrations/chlorine mass rates) at water quality sources to satisfy the above objective under dynamic conditions is a complex process. A nonlinear optimization problem is formulated to determine the chlorine dosage at the water quality sources subjected to minimum and maximum constraints on chlorine concentrations at all monitoring nodes. A genetic algorithm (GA) approach in which decision variables (chlorine dosage) are coded as binary strings is used to solve this highly nonlinear optimization problem, with nonlinearities arising due to set-point sources and non-first-order reactions. Application of the model is illustrated using three sample water distribution systems, and it indicates that the GA,is a useful tool for evaluating optimal water quality source chlorine schedules.

Ground motion prediction equation considering combined dataset of recorded and simulated ground motions

Himalayan region is one of the most active seismic regions in the world and many researchers have highlighted the possibility of great seismic event in the near future due to seismic gap. Seismic hazard analysis and microzonation of highly populated places in the region are mandatory in a regional scale. Region specific Ground Motion Predictive Equation (GMPE) is an important input in the seismic hazard analysis for macro- and micro-zonation studies. Few GMPEs developed in India are based on the recorded data and are applicable for a particular range of magnitudes and distances. This paper focuses on the development of a new GMPE for the Himalayan region considering both the recorded and simulated earthquakes of moment magnitude 5.3-8.7. The Finite Fault simulation model has been used for the ground motion simulation considering region specific seismotectonic parameters from the past earthquakes and source models. Simulated acceleration time histories and response spectra are compared with available records. In the absence of a large number of recorded data, simulations have been performed at unavailable locations by adopting Apparent Stations concept. Earthquakes recorded up to 2007 have been used for the development of new GMPE and earthquakes records after 2007 are used to validate new GMPE. Proposed GMPE matched very well with recorded data and also with other highly ranked GMPEs developed elsewhere and applicable for the region. Comparison of response spectra also have shown good agreement with recorded earthquake data. Quantitative analysis of residuals for the proposed GMPE and region specific GMPEs to predict Nepal-India 2011 earthquake of Mw of 5.7 records values shows that the proposed GMPE predicts Peak ground acceleration and spectral acceleration for entire distance and period range with lower percent residual when compared to exiting region specific GMPEs. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.

Sparse coding based VLAD for efficient image retrieval

Representing images and videos in the form of compact codes has emerged as an important research interest in the vision community, in the context of web scale image/video search. Recently proposed Vector of Locally Aggregated Descriptors (VLAD), has been shown to outperform the existing retrieval techniques, while giving a desired compact representation. VLAD aggregates the local features of an image in the feature space. In this paper, we propose to represent the local features extracted from an image, as sparse codes over an over-complete dictionary, which is obtained by K-SVD based dictionary training algorithm. The proposed VLAD aggregates the residuals in the space of these sparse codes, to obtain a compact representation for the image. Experiments are performed over the `Holidays' database using SIFT features. The performance of the proposed method is compared with the original VLAD. The 4% increment in the mean average precision (mAP) indicates the better retrieval performance of the proposed sparse coding based VLAD.

A Reliable Residual Based A Posteriori Error Estimator for a Quadratic Finite Element Method for the Elliptic Obstacle Problem

A residual based a posteriori error estimator is derived for a quadratic finite element method (FEM) for the elliptic obstacle problem. The error estimator involves various residuals consisting of the data of the problem, discrete solution and a Lagrange multiplier related to the obstacle constraint. The choice of the discrete Lagrange multiplier yields an error estimator that is comparable with the error estimator in the case of linear FEM. Further, an a priori error estimate is derived to show that the discrete Lagrange multiplier converges at the same rate as that of the discrete solution of the obstacle problem. The numerical experiments of adaptive FEM show optimal order convergence. This demonstrates that the quadratic FEM for obstacle problem exhibits optimal performance.

Micropropagación in vitro del clon de banano (Musa sp.) enano ecuatoriano (AAA)

Se establecieron in vitro yemas apicales de banano (Musa sp.) para su micro propagación durante tres sub-cultivos en un medio nutritivo artificial conteniendo sales minerales (MS), tiamina HCI, sacarosa y mio-inositol; variando con fines de estudio, la consistencia física del medio de cultivo (líquido y semi-sólido) y las concentraciones de reguladores de crecimiento: AIA= O y 1 mg/1 y 6-BAP= 5, 7 y 10 mg/1. Durante el establecimiento y multiplicación de los ex plantes se utilizó un cuarto de crecimiento para la incubación con temperaturas de 25 ± 1 ºc e intensidad lumínica de 2 000 lux. Inicialmente se establecieron in vitro 240 yemas apicales para su adaptación, de las cuales un 85 % (204) se adaptaron satisfactoriamente, el 15 % restante fueron descartados por contaminación, fenolización de las paredes del cormo o muerte de los ex plantes por no adaptación. La mayor contaminación se produjo por hongos y en menor medida por bacterias. La proliferación de hijos fue mayor en los medios de cultivo de consistencia semi-sólido en los tres sub-cultivos, correspondiendo los mejores resultados a la variante semi-sólida de los medios MS + 1mg/1 AIA+ 10 mg/16-BAP con promedio de 3.7 hijos por ex plante y 11 hijos en total, seguido por el medio MS_ + O mg/ AIA + 7 mg/1 6-BAP con 3.6 hijos por ex plante y 10.8 en total al final de los tres sub-cultivos. La menor proliferación se presentó en la variante líquida del medio MS + 1 mg/1 AIA + 10 mg/16-BAP con un promedio de 2.1 hijos por explante y 6.3 hijos en total. No se observó tendencia alguna en la proliferación de hijos con el aumento de los sub-cultivos, siendo evidente la influencia de la consistencia del medio de cultivo y la variación en los niveles de reguladores de crecimiento. El nivel más alto de 6-BAP (10 mg/1) utilizado indujo a la formación de multiyemas en los medios de cultivos líquidos, presentándose éstas a partir del II sub­ cultivo. Los medios de consistencia líquida favorecieron el crecimiento in vitro de los explantes, expresándose en un incremento en la altura y peso. Así mismo los medios líquidos indujeron a un desarrollo y crecimiento de raíces en todos los tratamientos estudiados.

Micropropagación en piña (Ananas comosus (L.) Merr) cultivar MD-2

El presente estudio se realizó en el laboratorio de cultivo de tejidos de la Universidad Nacional Agraria de abril del 2007 a marzo del 2008, con el objetivo de mejorar la eficiencia de producción de piña (Ananas comosus (L.) Merr.) en diferentes fases de la micropropagación. En establecimiento, enraizamiento y aclimatización se evaluaron medios de cultivos con difere ntes concentraciones de reguladores de crecimiento. En la multiplicación se estudió el tipo de consistencia del medio, frasco y número de explantes por frasco. En la fase de establecimiento los medios de cultivo que contenían las sales de Murashige y Skoog, (1962) con 1 mg/l BAP y 0.1 mg/l AIA ó ANA favorecieron la separación de los primordios de hojas; el color verde se presentó en los medios con ANA y BAP. En la fase de multiplicación los mejores medios de cultivo contenían 2 y 3 mg/l BAP de consistencia líquida, con brotes de 0.96 y 1.20. Los medios de cultivo que contenían las sales MS de consistencia semi sólida fueron superiores en número de hojas y raíces. La formación de brotes fue superior al usar frascos de 220 ml con 8 ex plantes en medio semisólido con un promedio de 3.43. La longitud de planta y el número de hojas presentaron promedios superiores en medio semisólido con 5 explantes y en frascos de 220 m l y 430 ml, respectivamente. La inducción de raíces fue favorecida en los medios de cultivo que contenían 1 mg/l de BAP con 40 g/l de sacarosa. Para la variable número de brotes, hojas y longitud de planta no hubo diferencia significativa entre los tratamientos. Las vitroplantas provenientes de plantas enteras presentaron 100% de sobrevivencia. El promedio de espinas fue más acentuado en los tratamientos de plantas partidas longitudinalmente. El número de hoja resultó similar estadísticamente en los medios con diferentes niveles de sacarosa en combinación con 0.1 y 1 mg/l de AIA. La longitud de planta obtuvo el mejor promedio en el medio que contenía 0.5 mg/l de AIA con 30 g/l de sacarosa.

Tratamiento Homeopático en Equino con Dermatofitosis

El presente trabajo, basado en un estudio de caso de carácter demostrativo, se llevó a cabo en la comunidad de Sabadell, Barcelona, región de Catalunya en España. Consistió en la aplicación de un tratamiento homeopático para Dermatofitosis en un equino macho castrado, de la raza Shire con 10 años de edad y un peso de 1000 kg, cuyos síntomas iniciales fueron: decaimiento, mucosas poco rosáceas, temperatura de 38.5, pelaje reseco, escoriaciones con exudaciones en las extremidades inferiores de forma circular, falta de apetito y estrés general a causa de los picores, se concluyó como causa de nivel micótico. A través de un examen de laboratorio de cultivo micológico se determinó la presencia de Thichophyton equinum, utilizando los resultados de laboratorio y los síntomas observados en el animal, se ingresaron los datos en el programa de medicina alternativa (Mc. Repertory Kent Program) que arrojo como medicamento de base sulfur coadyuvado por cremas de árnica y sepia. La importancia de este tratamiento radico en el estímulo del organismo del equino con dosis pequeñas de origen animal, vegetal y mineral, que no presentan ningún tipo de efecto colateral en el paciente, convirtiéndose en la alternativa de medicamentos tradicionales ya que existen fuertes restricciones sobre su uso en los caballos. Desde el punto de vista clínico y financiero el tratamiento resultó viable, por cuanto el paciente se recuperó satisfactoriamente sin presencia de recidivas ni efectos colaterales, además de resultar en una baja inversión por aplicación del tratamiento.

Lengua y derecho a la educación en la Comunidad Autónoma del País Vasco : reflexiones jurídicas sobre el tránsito hacia un nuevo modelo

The article analyzes the legal regime of Euskara in the education system of the Autonomous Community of the Basque Country (capv). In the capv, the legislation recognizes the right to choose the language of study during the educational cycle. The students are separated into different classrooms based on their language preference. This system of separation (of language models) has made it possible to make great strides, although its implementation also suggests aspects which, from the perspective of a pluralistic Basque society on its way towards greater social, political and language integration, call for further reflection The general model for language planning in the capv was fashioned in the eighties as a model characterized by the guarantee of spaces of language freedom, and the educational system was charged with making the learning of the region’s autochthonous language more widespread. At this point, we already have a fair degree of evidence on which to base an analysis of the system of language models and we are in a position to conclude that perhaps the educational system was given too heavy a burden. Official studies on language performance of Basque schoolchildren show (in a way that is now fully verified) that not all the students who finish their mandatory period of schooling achieve the level of knowledge of Euskara required by the regulations. When faced with this reality, it becomes necessary for us to articulate some alternative to the current configuration of the system of language models, one that will make it possible in the future to have a Basque society that is linguistically more integrated, thereby avoiding having the knowledge or lack of knowledge of one of the official languages become a language barrier between two communities. Many sides have urged a reconsideration of the system of language models. The Basque Parliament itself has requested the Department of Education to design a new system. This article analyzes the legal foundations on which the current system is built and explores the potential avenues for legal cooperation that would make it possible to move towards a new system aimed at guaranteeing higher rates of bilingualism. The system would be sufficiently flexible so as to be able to respond to and accommodate the different sociolinguistic realities of the region.