Estudo de revestimentos inorgânicos com inibidor de corrosão aplicado na superfície do concreto

The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon

The effect of increased light intensity on the aggressive behavior of the Nile tilapia, Oreochromis niloticus (Teleostei: Cichlidae)

Animals show behavioral and physiological changes that emerge in response to environmental perturbations (i.e., emergency life-history stages). In this study, we investigate the effects of light intensity on aggressive encounters and social stability in groups of adult male Nile tilapia, Oreochromis niloticus (Linnaeus, 1758). The study compared the behavior observed under low (280.75 ± 50.60 lx) and high (1394.14 ± 520.32 lx) light intensities, with 12 replicates for each treatment. Adult fish were isolated in 36-L aquaria for 96 hours, and three males were grouped for 11 days in 140-L aquaria. Agonistic behavior was video-recorded (10 min/day) on the 3rd, 5th, 7th, and 9th day to quantify aggressive interactions and social stability. There was an effect of light intensity and day of observation on the total number of agonistic behaviors performed by the fish group. Besides, increased frequency of aggressive interactions (the sum of the four sessions) by the alpha, beta and gamma fish occurred at the higher light intensity. The dominance ranks of the fish remained unchanged across the observation sessions under both the low and high light intensities. We concluded that enhanced light intensity has a cumulative effect that increases the aggressiveness of the Nile tilapia but that this effect is not sufficiently strong to destabilize the social hierarchy.

Batidas intensas : corpo e sociabilidade nas festas de música eletrônica em Natal

The significance of the body in electronic music parties as a sign for communicating and socializing among participants is the focus of this work. Qualitative research undertaken in this study seeks to investigate how sociability happens at raves and nightclubs in Natal/RN. Sociability is understood here as a play expression involving the dimensions of music, dance and party; the body, seen from a transdisciplinary approach, is understood as a symbolic instance, with its own meanings, as a result and a producer of social and as a cross between the cultural and the biological. The body has a communicative potential, is primary media. An intersection point between nature and culture, it serves as the seat of emotions and sociability, since it is through it that social relations are made. In electronic music parties, the body is interpreted based on its communication signs: clothing, accessories, body movements, tactile contact, body language, interactions between the public and dj, the dj and the public, gestures, expressive speech of emotions. Through such signs, body communication and a sense of community among participants develop sociability in the festive place and change the mood of the dancers. The Natal s electronic music parties young goer interacts on parties, adopts cheerful and receptive positions towards the other, maintains physical contact, values dance as a form of communication and lists happiness as the main feeling aroused in electronic music festivals. To achieve this result, a plurimetodological approach was used, which consisted of various methodological devices and various techniques of investigation: ethnographic observation, individual and informal interview techniques, photographic record of the scene, in-depth interview and application thirty questionnaires to patrons of electronic music parties

Reference evapotranspiration estimation inside greenhouses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aggressive behavior in the genus Gallus sp

The intensification of the production system in the poultry industry and the vertical integration of the poultry agribusiness have brought profound changes in the physical and social environment of domestic fowls in comparison to their ancestors and have modified the expression of aggression and submission. The present review has covered the studies focusing on the different aspects linked to aggressiveness in the genus Gallus. The evaluated studies have shown that aggressiveness and subordination are complex behavioral expressions that involve genetic differences between breeds, strains and individuals, and differences in the cerebral development during growth, in the hormonal metabolism, in the rearing conditions of individuals, including feed restriction, density, housing type (litter or cage), influence of the opposite sex during the growth period, existence of hostile stimuli (pain and frustration), ability to recognize individuals and social learning. The utilization of fighting birds as experimental material in the study of mechanisms that have influence on the manifestation of aggressiveness in the genus Gallus might comparatively help to elucidate important biological aspects of such behavior.

Soybean root growth and yield in rotation with cover crops under chiseling and no-till

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desgaste corrosivo-cavitativo-erosivo de um aço-carbono em meio aquoso com frações de sal (NaCl), CO2 e particulados sólidos (SiO2)

A batch of eighty-four coupons of low carbon steel were investigated at laboratory conditions under a corrosive, cavitative-corrosive (CO2) and corrosive-erosive (SiO2 + CO2) in an aqueous salt solution and two levels of temperature. The following measurements were made on Vickers (HV0,05, HV0,10, HV0,20) Microhardness tests at three levels of subsurface layer. A turbulent flow collided on the cylindrical sample, with and without mechanical stirring and gas bubbling, with and without fluid contamination by solid particles of SiO2, at two temperatures. Surface Roughness and Waviness, under two conditions "as received, after machining" and "after worn out", as well as gravimetric and electrochemical parameter were measured on the two opposite generatrices of each cylindrical sample, on the flow upstream (0°) and downstream (180°) by Profilometry, Mass Variation and Linear Polarization Resistance (LPR). The results of the Microhardness and Surface Texture of all coupons were subjected to statistical comparison, using the software Statgraphics® Centurion XVI, 95% statistical certainty, and significant differences were observed in some arrays of measurements. The corrosive wear rate measured by LPR and mass variation shown to be sensitive to the presence of bubbles and hydrodynamic fluctuations inside the cell, considering the temperature and contamination of corrosive fluid by solid particles. The main results of visual inspection relative to some topologies of the surface damages involving different mechanisms that were seen to give explanation for some fluctuations in wear rates of the steel experimentally investigated

A new method to quantify macroalgae and a practical sampler for experimentation in lotic habitats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultrathin films of lignins as a potential transducer in sensing applications involving heavy metal ions

Lignins extracted from sugar cane bagasse using different alcohols in the organosolv-CO(2) supercritical pulping process have been applied in the fabrication of ultrathin films through the Langmuir-Blodgett technique. Langmuir films were characterized by surface pressure versus mean molecular area (Pi-A) isotherms to exploit the sensitivity of nanostructured lignin films to metallic ions (Cu(2+), Cd(2+) and Pb(2+)). The Pi-A isotherms were shifted to larger molecular areas when heavy metal ions are present into the subphase, which might be related to electrostatic repulsions between metallic ions entrapped within the lignin molecular structure. Taking the advantage of metal incorporation, Langmuir monolayers were transferred onto solid substrates forming Langmuir-Blodgett (LB) films to be used as a transducer in an "electronic tongue" system to detect Cu(2+) in aqueous solution below threshold standard established by the Brazilian regulation. Both techniques impedance spectroscopy and electrochemistry have been used in these experiments. Complementary, Fourier transform infrared (FTIR) spectroscopy recorded for LB films before and after soaking into Cu(2+) aqueous solution revealed an interaction between the lignin phenyl groups and the metallic ion. (C) 2007 Elsevier B.V.. All rights reserved.

Efeitos do treino em esteira na marcha com dupla tarefa de indivíduos com doença de Parkinson: ensaio clínico controlado randomizado

Background: The gait automaticity loss difficults realization of concurrent activities - Dual Task (DT). In these situations, individuals with Parkinson`s disease (PD) show a significant reduction in gait velocity and stride length, as strides variability and asymmetry increased, factors predisposing to falls. However, recent studies have shown that training involving DT may cause subsequent improvements in gait variables with DT in individuals with PD. The treadmill use was adopted by this study, by promoting greater regularity in step and enhance training. Objective:To investigate immediate effects of gait training associated with cognitive tasks on gait in individuals with PD. Methods: Twenty-two volunteers were randomly divided into two groups: control group (n = 11), who performed gait training on a treadmill for 20 minutes, and the experimental group (n = 11), who performed treadmill gait training for 20 minutes associated with cognitive tasks of verbal fluency, memory, and spatial planning. Participants were evaluated in phase on of antiparkinsonian medication as the demographic, clinical and anthropometric (identification form), cognitive status (Montreal Cognitive Assessment - MoCA), executive function (Frontal Assessment Battery), level of physical disability (Hoehn and Yahr Modified), motor and functional status (Unified Rating Scale for Parkinson`s Disease - UPDRS), and kinematics (Qualisys Motion Capture System). Results: There were not differences between groups, but both showed improvement after the intervention. The control group had an increase in velocity (p = 0.008), stride length (p = 0.04), step length (p = 0.02) and decreased double support time(p = 0.03). The experimental group showed an increase in speed (p = 0.002), stride length (p = 0.008), step length (p = 0.02) and cadence (p = 0.01), as well as a decrease in the width stride (p = 0.001) and total support time (p = 0.02). As the angular variables, the experimental group had a significant increase in the initial contact angle of ankle (p = 0.01). Conclusion: The gait training combined with cognitive activities didn`t provide significant improvements in gait variables with DT, but this study was the first to demonstrate that gait training on treadmill as simple task minimized the negative interference of DT in PD

Indirect optical transitions from carriers trapped on the delta doping and on the parabolic quantum well

In this work, doped AlGaAs/GaAs parabolic quantum wells (PQW) with different well widths (from 1000 angstrom up to 3000 angstrom) were investigated by means of photoluminescence (PL) measurements. In order to achieve the 2DEG inside the PQW Si delta doping is placed at both side of the well. We have observed that the thickness of this space layer plays a major rule on the characteristics of the 2DEG. It has to be thicker enough to prevent any diffusions of Si to the well and thin enough to allow electrons migration inside the well. From PL measurement, we have observed beside the intra well transitions, indirect transitions involving still trapped electron on the delta doping and holes inside the PQW. For the thinness sample, we have measured a well defined PL peak at low energy side of the GaAs bulk emission. With the increasing of the well thickness this peak intensity decreases and for the thickest sample it almost disappears. Our theoretical calculation indicated that carriers (electron and holes) are more placed at the center of the PQW. In this way, when the well thickness increases the distance between electrons on the delta doping and holes on the well also increases, it decreases the probability of occurrence of these indirect optical transitions. (C) 2012 Published by Elsevier B.V. Selection and/or peer-review under responsibility of Universidade Federal de Juiz de Fora, Brazil.

Desventuras de Hypolita: luta contra a escravidão ilegal no sertão (Crato e Exu, século XIX)

This paper analyses the history of Hypolita Maria das Dores, mulatto woman, free born, was enslaved and, by an act of freedom, appealed to court to prove the illegitimacy of her captivity and regain their freedom and their children. The main scenarios of this social and legal struggle are Crato (Ceará) and Exu (Pernambuco), places where she lived in the 19th century. The main objective of this work is to understand how to set the tensions and alliances involving the struggle for freedom inside and outside justice, in differentiated provincial spaces. An approach that belongs to the field of the social history of slavery, we ll prioritize the narrative of life. In it, Hypolita is taken as the subject of her story, as she faces stately and patriarchal values in a slave society. The documentary corpus that allows such vertical investigative consists of parish registers, we examined the baptisms, marriages and death records; analyzed registry documents of postmortem inventories, petitions and crafts; reports of provincial presidents and, finally, the O Araripe s and O Cearense s journalistic information. The investigation of the case allowed the understanding of how, in space and time specific, freedom was understood, usurped and claimed by various social subjects in the frame of morals and justice institutionalized

A sustainable alternative for cooling the machining processes using a refrigerant fluid in recirculation inside the toolholder

This article presents a cooling system for cutting tool in turning based in a toolholder with cooling fluid flowing inside its body being that this fluid must necessarily be able to phase change due to heat generated from machining processes. In this way, the fluid evaporates just under the cutting tool allowing a heat transfer more efficient than if were used a fluid without phase change once the latent heat of evaporation is beneficial for removal heat. Following, the cooling fluid evaporated passes through a condenser located out of the toolholder where it is condensated and returns to the toolholder again and a new cycle is started. In this study, the R-123, a hydrochlorofluorocarbon (HCFC) fluid, was selected for the turning of a Cr-Ni-Nb-Mn-N austenitic steel of hard machinability. The machining tests were carried out under three different machining conditions: dry machining, external cutting fluid (conventional method), and with the toolholder proposed. As result, the developed system allows a surface roughness up to 10% better than dry machining and a tool life close to the conventional method, but 32% superior to dry machining; moreover, there are environmental and economics advantages once the cooling fluid is maintained in a loop circuit.

Analysis of the accumulated energy by thermal stratification of liquid inside storage tanks with porous layers

A mathematical model was developed in order to study the behavior of thermal stratification of liquid in a typical storage tank with porous medium. The model employs a transient stream function-vorticity formulation to predict the development of stream function and temperature fields in a charging process. Parameters analyzed include Biot, Darcy, Reynolds and Richardson numbers, position, and the thickness of the porous medium. The results show the influence of these physical parameters that should be considered for a good design of storage tanks with thermal stratification.

Distribuição diária do comportamento da mosca da fruta Anastrepha zenildae Zucchi, (Diptera: Tephritidae) em laboratório.

The knowledge of Anastrepha zenildae behavioral aspects combined with the biology of Tephritidae may contribute to monitoring and control programs of this fruit fly that is considered as economically important to the Rio Grande do Norte state. In order to characterize the daily activity profile of this species, we studied the behaviors of resting, locomotion, feeding, cleaning, courtship, copulation and oviposition of animals submitted to an artificial 12:12h light-dark cycle (750:1lux) with controlled temperature (26±2 °C). The observations were made with groups of 16 males and 16 females during 3 consecutive days each generation from parental to F5. Resting, locomotion, feeding and cleaning data were recorded as frequency and time of occurrence by scanning technique in 15 minutes windows per hour, with a record each minute. Courtship, copulation and oviposition were recorded as frequency, time of occurrence and duration by al occurrences technique. Resting was the most frequent behavior with males resting more than females. Locomotion was more evident in the first half of the ligh phase with higher values in females. Cleaning and feeding behaviors were more frequent in the second half of the light phase for both sexes with females eating more frequently than males. During the courtship, males were grouped in lek formations showing wings vibration and pheromone liberation. Courtship occurred more frequently 4 to 7 h after lights on (81,9%) with copulations being more frequent 6 h after lights on with a mean duration of 58,1±40,4 min. Copulation attempts were observed in males inside and outside the lek with aggressive behavior being observed only between males in the lek. Oviposition behavior was similar to that described for other species of the genus with a peak of this activity 2-3 h after the lights on, mean duration of 43, 7±34, 8 sec and 2 to 5 eggs by event. According to the results, sexual behavior of A. zenildae is temporally different of other sympatric species of the genus, being favorable to the reproductive isolation as well as the use of resources as oviposition substrate.