Embryonic and larval development of Mystus gulio (Ham.)

Mystus gulio eggs are strongly adhesive and contain relatively small yolk (0.75-1.0 mm). The egg envelop is thick and transparent. First cleavage (two cells), four cells, eight cells, sixteen cells and multi cells stages were found 20, 25, 35-40, 60 and 70 minutes after fertilization, respectively. The morula stage was visualized within 1.5 h after fertilization. The heart beat visible and the circulatory system commenced after 16 h of fertilization. Embryos hatched 18-20h after activation of egg. The newly hatched larva measured 2.82±0.03 mm in length and 0.32±0.06 mg in weight. The yolk sac was fully absorbed by the third day though larvae commenced exogenous feeding even before completion of yolk absorption. A 5-day old post larva began wandering in search of food. Ten-day old post larvae endowed with eight branched rays in dorsal fin and seven in caudal fin. Fifteen-day old post larvae had the pectm:al spine become stout though the embryonic fin folds had to be disappeared. The length of fingerlings ranged from 25-30 mm after 30 days, and their external features were just like those of an adult except that they were not sexually matured.

Study morphologic, phylogenic relationships DNA barcoding of of identified decapod group (Crustacean) of Persian Gulf and Oman Sea.

Phylogenetic relationships among all described species (total of 12 taxa) of the decapoda, were examined with nucleotide sequence data from portions of mitochondrial gene and cytochrome oxidase subunit I (COI). The previous works on phylogeny proved that the mitochondrial COI gene in crustacean is a good discriminative marker at both inter- and intra-specific levels. We provide COI barcode sequences of commertial decapoda of Oman Sea, Persian Gulf, Iran. Industrial activities, ecologic considerations, and goals of the decapoda Barcode of Life campaign make it crucial that species of the south costal be identified. The reconstruction of evolut phylogeny of these species are crucial for revealing stock identity that can be used for the management of fisheries industries in Iran. Mitochondrial DNA sequences were used to reconstruct the phylogeny of the Penaeus species of marine shrimp. For this purpose, DNA was extracted using phenol- chloroform well as CTAB method. The evolutionary relationships among 12 species of the decapoda were examined using 610 bp of mitochondrial (mt) DNA from the cytochrome oxidase subunit I gene. Finally the cladograms were compared and the resulted phylogenetic trees confirmed that the Iran's species origin is Indo-west pacific species. Iran's species, which were not grouped with the other decapoda taxa seem to always form a sister clade with Indo-west pacific species with strong bootstrap support 100%. The result completely agrees with the previously defined species using morphological characters.However, we still lack any comprehensive and clear understanding of phylogenetic relationships in this group.

Population genetic structure of Rutilus frisii kutum in Caspian Sea using biometry and microsatellite molecular technique

In order to carry out Biometric studies, 75 samples were caught from 3 locations ( Tajan river, Sefidrud and Shirud) using Salic and the length (±1 mm) and weights (± 5 gr) of samples were determined. Using One-way ANOVA by SPPSS software, there wasn’t significant difference between locations in length and fecondity (P ≥0.01(, but there was significant difference between Shirud and tajan samples with sefidrud in weight ) P≤0.01(. In order to carry out genetic variation studies, 210 fish were caught from 3 different regions of the Iranian coastline (Khoshkrud, Tonekabon, Gorganrud) and 1 region in Azerbaijan (Waters of the Caspian Sea close to Kura River mouth) during 2008-2009 . Genomic DNA was extracted of fin using the phenol-chloroform. The quantity and quality of DNA from samples were assessed by spectrophptometer and 1% agarose gel electro-phoresis. PCR was carried out using 15 paired microsatellite primers. PCR products were separated on 8% polyacrylamide gels that were stained using silver nitrate. Molecular weight calculate using UVTech software. The recorded microsatellite genotypes were used as input data for the GENALEX software version 6 package in order to calculate allele and genotype frequencies, observed (Ho) and (He) expected heterozygosities and to test for deviations from Hardy-Weinberg equilibrium. Genetic distance between two populations was estimated from Nei standard genetic distance and genetic similarity index (Nei, 1972). Genetic differentiation between populations was also evaluated by the calculation of pairwise estimates of Fst and Rst values. From 15 SSR markers were used in this investigation, 9 of them were polymorph. Average of expected and observed heterozygosity was 0.54 and 0.49 respectively. Significant deviations from Hardy-Weinberg expectations were observed in all of location except Anzali lagoon- autumn in AF277576 and EF144125, Khoshkrud in EF144125 and Gorganrud and Kura in AF277576. Using Fst and Rst there was significant difference between locations ) P≤0.01(. According to Fst , the highest population differentiation (Fst= 0.217) was between Gorganrud and Khoshkrud that have the lowest Nm and the lowest (Fst= 0.086) was between Gorganrud and Tonekabon that have the highest Nm. Using Rst the highest population differentiation (Rst= 0.271) was between Tonekabon and spring Anzali lagoon and the lowest (Rst= 0.026) was between Tonekabon and Autumn Anzali 159 lagoon. Also the difference between Spring Anzali lagoon and Autumn Anzali lagoon was noticeable (Fst=0.15). AMOVA analysis with consideration of 2 sampling regions (Iran and Azerbaijan) and 7 sampling locations (Iran: Khoshkrud, Tonekabon, Gorganrud, Spring Anzali lagoon and Autumn Anzali lagoon ; Azerbaijan: the Kura mouth) revealed that almost all of the variance in data namely 83% )P≤0.01( was within locations, Genetic variances among locations was 14% )P≤0.01( and among regions was 3% )P≤0.01(. The genetic distance was the highest (0.646) between Gorganrud and Autumn Anzali lagoon populations, whereas the lowest distance (0.237) was between Gorganrud and Tonekabon River. Result obtained from the present study show that at least 2 different population of Rutilus frissi kutum are found in the Caspian sea,which are including the kura river population and the southern Caspian sea samples and it appears that there is more than one population in southern Caspian sea that should be attantioned in artifical reproduction Center and stoke rebilding.

Investigation of polymorphism by PCR-RFLP method in Cobia fish Rachycentron canadum in the Persian Gulf and Oman Sea

Cobia is a native fish species in Iranian waters in the Persian Gulf and Sea of Oman and has a good internal and foreign market. This fish is a fast growing species and for this reason Iranian Fisheries is considering to go for it culture practices. To go for any utilization such as fishing from wild stocks or culture activities, needs a better understanding of its peculiarities and genetic characteristics of its natural resources. Therefore, this project was discribed and conducted. In this investigation, cuts 2 or 3 cm of fin tissue of  specimen of Cobia obtained from Sistan and Bluchestan, Hormozgan, Bushehr and Khuzestan water provinces, were collected. DNA was extracted by Phenol-chlorophorm method and produced PCR product in length of 1060 and 1450 base pair of two mitochondrial genes COI and NADH2. Using 13 cutting enzymes (4 enzymes were subscriber for both of genes), 205 base pair (from 2510 base pair, equal with %3.8 from gene regains) were directly investigated. But binding patterns of enzymatic digestion of PCR products of both COI and ND genes from electrophoresis were monomorph in all samples and no polymorphism was observed. This may be attributed to the unsuitable choice of COI and ND2 genes for showing of intra specific divergence. But in general non-existence of genetic diversity or noticeable decrease of that among individuals has been reported in regions were fish migration exist and they can freely move between two regions. Therefore, non-observation of polymorphism in the study area might be the case and indicates represents the area. On the other hand, some scientists believe that the distributions of populations in different regions are greatly affected by environmental and physical and ecological factors. Althoug Cobia is a migratory fish, but with regard to the fact that the environmental conditions are different (specially temperature and salinity) between east and west of Persian Gulf and Oman sea, there is a possibility that different genetic groups of this species exist in the regions. Of course It is clear that using more samples and enzymes from other genetically regions could produce better results. Since none of the two investigated genes didn’t show genetic divergence or polymorphism amongst the individuals of one region or between different regions, therefore, statistic analysis for estimating of haplotype diversity or nucleotide diversity and drawing of relationship tree among individuals using available softwares was not possible.

Study of inter species diversity and population structure by molecular genetic method in Iranian Artemia

Artemia is a small crustacean that adapted to live in brine water and has been seen in different brine water sources in Iran. Considering the importance of genetic studies manifest inter population differences in species, to estimate genetic structure, detect difference at molecular level and separate different Artemia populations of Iran, also study of phylogenic relationships among them, samples of Artemia were collected from nine region: Urmia lake in West Azerbaijan, Shoor and Inche-Borun lakes in Golestan, Hoze-Soltan and Namak lakes in Qom, Maharloo and Bakhteghan lakes in Fars, Nough pool in Kerman and Mighan pool in Markazi and DNA extracted by phenol-chloroform method. Primers designed on a ribosomal fragment (16s rRNA) of mt DNA sequence and PCR was done. Digestion of the 1566 bp segment PCR product by 10 restriction endonuclease (Alu I, EcoR I, Eco47 I, Hae III, Hind III, Hinf I, Mbo I, Msp I, Rsa I, TaqI) showed 25 different haplotypes: 9 in Urmia, 4 in Shoor and Inche- Borun, 1 in Namak and Hoze-Soltan, 3 in Mighan, 1 in Bakhtegan Maharlo, 3 in Maharloo and 4 in Nough. Measurement of haplotype and nucleotide diversity intra population and nucleotide diversity and divergence inter populations and evolutionary distance between haplotypes showed a high diversity in mitochondrial genome of Artemia in studied regions whose results are similar to those explained for highly geographic expansion organism. In addition, results showed considerable heterogeneity between different populations and there are enough evidences in haplotypic level for separation of studied samples and division of Iranian Artemia to seven populations including Urmia, Shoor and Inche-Borun, Hoze-Soltan and Namak, Maharloo, Bakhteghan, Nough and Mighan. Phylogenetic analysis of the 16S rRNA data set resulted strict consensus and neighbor joining distance trees, demonstrated that all samples were monophyletic and parthenogenetic form derivation from bisexual populations and genetically high resemblance to those of A. urmiana. Study of 270 specimens from different region showed the genus Artemia in Iran clustered into three clades including: 1- Shoor, Inche-Burun, Hoze-Soltan, Namak, Bakhtegan and Maharloo 2- Nough and Mighan 3- Urmia. Totally, obtained results indicated to ability of used techniques for study of inter species diversity, population structure, reveal of phylogenic relationship and dividing of different populations of Artemia in Iran.

The genetic diversity of Acipenser stellatus populations in the Caspian Sea was studied using microsatellite technique

A total of 361 caudal fin samples were collected from adult A. stellatus specimens caught in the north Caspian Sea, including specimens from Kazakhstan (Ural River), Russia (Volga River), Azerbaijan (Kura River), specimens caught in the south Caspian Sea including specimens from Fishery Zone 1 (from Astara to Anzali), Fishery Zone 2 (from Anzali to Ramsar), Fishery Zone 3 (from Nowshahr to Babolsar), Fishery Zone 4 (from Miyankaleh to Gomishan) as well as from specimens caught in Turkmenistan (all specimens were collected during the sturgeon stock assessment survey). About 2 g of fin tissue was removed from each caudal fin sample, stored in 96% ethyl alcohol and transferred to the genetic laboratory of the International Sturgeon Research Institute. Genomic DNA was extracted using phenol-chloroform method. The quality and quantity of DNA was assessed using 1% Agarose gel electrophoresis and Polymerase Chain Reaction (PCR) was conducted on the target DNA using 15 paired microsatellite primer. PCR products were electrophoresed on polyacrylamide gels (6%) that were stained using silver nitrate. Electrophoretic patterns and DNA bands were analyzed with BioCapt software. Allele count and frequency, genetic diversity, expected heterozygosity and observed heterozygosity allele number, and the effective allele number, genetic similarity and genetic distance, FST and RST were calculated. The Hardy Wienberg Equilibrium based on X2 and Analysis of Molecular Variance (AMOVA) at 10% confidence level was calculated using the Gene Alex software. Dendrogram for genetic distances and identities were calculated using TFPGA program for any level of the hierarchy. It is evident from the results obtained that the 15 paired primers studied, polymorphism was observed in 10 pairs in 12 loci, while one locus did not produce DNA bands. Mean allele number was 13.6. Mean observed and expected heterozygosity was 0.86 and 0.642, respectively. It was also seen that specimens from all regions were not in Hardy Wienberg Equilibrium in most of the loci (P≤0.001). Highest Fst (0.063) was observed when comparing specimens from Fishery Zone 2 and Fishery Zone 4 (Nm=3.7) and lowest FST (0.028) was observed when comparing specimens from the Volga River and those from the Ural River (8.7). Significant differences (P<0.01) were observed between RST recorded in the specimens studied. Highest genetic distance (0.604) and lowest genetic resemblance (0.547) were observed between specimens from Fishery zones 2 and 4. Lowest genetic distance (0.311) and highest genetic resemblance (0.733) was observed between specimens from Turkmenistan and specimens from Fishery zone 1. Based on the genetic dendrogeram tree derived by applying UPGMA algorithm, A. stellatus specimens from Fishery zone 2 or in other words specimens from the Sepidrud River belong to one cluster which divides into two clusters, one of which includes specimens from Fishery zones 1, 3 and 4 and specimens from Turkmenistan while the other cluster includes specimens from Ural, Volga and Kura Rivers. It is thus evident that the main population of this species belongs to the Sepidrud River. Results obtained from the present study show that at least eight different populations of A. stellatus are found in the north and south Caspian Sea, four of which are known populations including the Ural River population, the Volga River population, the Kura River population and the Sepidrud River populations. The four other populations identified belonging to Fishery zones 1, 3, and 4 and to Turkmenistan are most probably late or early spawners of the spring run and autumn run of each of the major rivers mentioned. Specific markers were also identified for each of the populations identified. The Ural River population can be identified using primers Spl-68, 54b and Spl-104, 163 170, 173, the Volga River population can be identified using primers LS-54b and Spl-104, 170, 173 113a and similarly the population from the Kura River can be identified using primers LS-34, 54b and Spl-163, 173 and that from the Sepidrud River can be identified using primers LS-19, 34, 54b and Spl-105, 113b. This study gives evidence of the presence of different populations of this species and calls for serious measures to be taken to protect the genetic stocks of these populations. Considering that the population of A. stellatus in Fishery zone 2 is an independent population of the Sepidrud River in the Gilan Province, the catch of these fishes in the region needs to be controlled and regulated in order to restore the declining stocks of this species.

无棘溪蟾早期个体发育与进化的研究(英文)

无棘溪蟾（Torrentophryne aspinia）分布于云南西部海拔1800—2200m、森林茂密的山区溪流附近,溪水常清,流速约0.3m/s。其繁殖季节始于中秋,持续约1个月,为短期密集的爆发性繁殖类型。此间,雄蟾为抱对而具有明显的求偶行为和强烈的争雌、排斥同类的行为。抱对方式为腋胸式即雄蟾前肢穿过雌蟾的腋下,其婚垫紧贴雌蟾胸部中央的两侧。抱对约2—4天后,产卵于水流较缓的回水凼中,卵被包于胶质管状带中。产卵时间在白天或夜间,水温11—16℃,约持续3—6h;产卵数 1500—3000粒,一次性产完,其间雌蟾一般不走动,故卵带只一端固定,其余大部松散地漂浮于水中,产完卵后不久,雌雄蟾均上岸而去,并再难发现。若遇猝冷,抱对体将自行拆散并停止繁殖。 腹吸盘（abdominal sucker）的发生是溪蟾类个体发育和系统演化的一个独特而重要的方面,它是蝌蚪藉以在溪流中生存的必须器官,同时也是溪蟾类与其它蟾蜍类在系统演化上的分歧所在。所有蟾蜍类蝌蚪在尾芽期前是被包在卵胶带中的,并且都具有附着器（adhesive or-gan）,该附着器在溪蟾类将继续发育成腹吸盘,而在其他蟾蜍类则不再发育成腹吸盘。溪蟾类由于...

A new species of sisorid catfish genus Glyptothorax (Teleostei: Sisoridae) from Salween drainage of Yunnan, China

A new species of the genus Glyptothorax, Glyptothorax obliquimaculatus sp. nov. is described from the Xiaohei River, a tributary of the Nanting River, Salween drainage, in southwestern Yunnan province, China. This new species can be distinguished from its congeners by the following combination of characteristics: unculiferous ridges of the thoracic adhesive apparatus extending anteriorly onto the gular region; body with irregular dark blotches scattered along lateral surface (blotches mostly oblique); skin smooth on head and body; dorsal spine smooth without serrations on its posterior margin; lips smooth; posterior margin of pectoral spine with 7-8 serrations; dorsal-fin base 11.0-13.2% SL; pectoral-fin length 15.6-19.6% SL; depth of caudal peduncle 8.6-9.8% SL; head width 19.1-24.0% SL; nasal barbel length 23.3-33.3% HL.

Growth rates of Tilapia esculenta (Graham) and Tilapia zillii (Gervais) under cultivation in ponds at Nyegezi, Tanzania

Aquaculture in Tanzania is still on a subsistence level and most of the ponds are maintained as part time job. The ponds are too small, shallow and over crowded with stunted Tilapia spp. In the present paper the results of experiments conducted in ponds at Nyegezi with T. esculenta and T. zillii are presented. This was part of an overall project of developing techniques of fish cultures with Tilapia under the limited existing conditions at Nyegezi. In a mono - species culture experiement with Tilapia zillii in nine month's time an average size of 172.8 mm/115.0 g was attained. In another experiment with T. zillii and T. esculenta in thirteen month's time, T. zillii attained an average size of 180.2mm/106.6 g and T. esculenta 193.6 mm/118.8 g. In another experiment with intensive feeding schedule an average size of 179.3 mm/126.6 g was attained by T. zillii and 191.0 mm/125.0 g by T. esculenta in four month's time. A locally prepared supplimentary feed with local Brewery Waste and Fish Meal (10:1) was readily accepted by both species of Tilapia. T. zillii voraciously fed on Cabbage leaves, Cauliflower leaves, Chinese cabbage leaves, Cassava leaves and on the common weed Comalina sp. Though all the items mentioned above were readily accepted by T. zillii feeding with Comaltna sp. was the easiest and most convenient because of its availability. In an intensive feeding experiment with vegetable leaves/Comalina sp. and the locally prepared supplimentary feed the fishes attained table size in four months time. Cement cistens of 5 X 3 X 1½ m size could be conveniently used for breeding both species of Tilapia. T. zillii had semi adhesive eggs and they were deposited on the sides of the cement wall. The number of young ones in a brood ranged from 160 to 314 in T. esculenta and 687 to 4,356 in T. zillii.

Hybridization between Tilapia zillii (Gervais) and Tilapia andersonii (Casteinau) at the Freshwater Fisheries Institute, at Nyegezi, Tanzania

As a part of an overall project on fishculture development techniques in Tanzania, hybridization between Tilapia zillii and Tilapia andersonii was carried out at the Freshwater Fisheries Institute, Nyegezi, Tanzania. T. andersonii, a plankton feeder, is not indigenous to Tanzania but was introduced in 1968 from Zambia for certain specific purpose. T. zillii, a macrovegetation feeder, is present locally and is common. In the present studies T. zillii (245.0 mm/260.0 g) female was hybridized with T. andersonii (288.0 mm/350.0 g) male. Under cement cistern conditions it was only after about four months of acclimatization that hybridization between the two occurred. About 1,637 interspecific hybrid fry were produced in a single brood. Eggs were adhesive and parental care shown by the female, the male being driven away. Growth under cistern conditions was slow, attaining a size of 134.8 mm/44.3 g in 10 months. But this growth rate need not be taken as ideal. In body shape, colouration and other morphometric characters the hybrids had inherited from both parents. The number of gill rakers among the hybrids was eighteen which was intermediate between T. zillii (12) and T. andersonii (27). Among one hundred and seventy two specimens (106.0 mm - 168.0 mm) cut and examined the sex ration was hundred per cent males and all of them were between II and IV stages of maturity. This is the first report of fish hybridization from Tanzania and possibly the first report on hybridization between T. zillii and T. andersonii. The full significanoe of the findings and its role in African fishculture is discussed.

On the stability of a rod adhering to a rigid surface: Shear-induced stable adhesion and the instability of peeling

Using variational methods, we establish conditions for the nonlinear stability of adhesive states between an elastica and a rigid halfspace. The treatment produces coupled criteria for adhesion and buckling instabilities by exploiting classical techniques from Legendre and Jacobi. Three examples that arise in a broad range of engineered systems, from microelectronics to biologically inspired fiber array adhesion, are used to illuminate the stability criteria. The first example illustrates buckling instabilities in adhered rods, while the second shows the instability of a peeling process and the third illustrates the stability of a shear-induced adhesion. The latter examples can also be used to explain how microfiber array adhesives can be activated by shearing and deactivated by peeling. The nonlinear stability criteria developed in this paper are also compared to other treatments. © 2012 Elsevier Ltd. All rights reserved.

Dwell time effect in peeling PSA laminates

Air, trapped interfacially between the adhesive and the substrate, can have a detrimental effect on the peel strength of bonds formed by a PSA and relatively impermeable adherends. If the adhesive wets the substrate surface so that the contact angle is small then the forces of the surface tension within the adhesive can lead to the gradual expulsion of these pockets of air and thereby to the enhancement of the peel strength-the dwell-time effect. Using a high-performance PSA transfer tape it has been found that this strengthening effect may operate over many thousands of hours. With increasing hydrophobicity of the surfaces, this effect can be suppressed and a poor peel strength remains essentially constant with time. The observed rates at which the peel strength increases are quantitatively consistent with diffusion of entrapped air out of the interface. © 2012 Copyright Taylor and Francis Group, LLC.

Transverse cracking of a simple lap joint under axial load

The failure mode of axially loaded simple, single lap joints formed between thin adherends which are flexible in bending is conventionally described as one of axial peeling. We have observed - using high-speed photography - that it is also possible for failure to be preceded by the separation front, or crack, moving in a transverse direction, i.e. perpendicular to the direction of the axial load. A simple energy balance analysis suggests that the critical load for transverse failure is the same as that for axial separation for both flexible lap joints, where the bulk of the stored elastic energy lies in the adhesive, and structural lap joints in which the energy stored in the adherends dominates. The initiation of the failure is dependent on a local increases in either stress or strain energy to some critical values. In the case of a flexible joint, this will occur within the adhesive layer and the critical site will be close to one of the corners of the joint overlap from which the separation front can proceed either axially or transversely. These conclusions are supported by a finite element analysis of a joint formed between adherends of finite width by a low modulus adhesive. © 2012 Taylor & Francis.

Bio-inspired hierarchical polymer fiber-carbon nanotube adhesives.

Hierarchical pillar arrays consisting of micrometer-sized polymer setae covered by carbon nanotubes are engineered to deliver the role of spatulae, mimicking the fibrillar adhesive surfaces of geckos. These biomimetic structures conform well and achieve better attachment to rough surfaces, providing a new platform for a variety of applications.

Functionally different pads on the same foot allow control of attachment: stick insects have load-sensitive "heel" pads for friction and shear-sensitive "toe" pads for adhesion.

Stick insects (Carausius morosus) have two distinct types of attachment pad per leg, tarsal "heel" pads (euplantulae) and a pre-tarsal "toe" pad (arolium). Here we show that these two pad types are specialised for fundamentally different functions. When standing upright, stick insects rested on their proximal euplantulae, while arolia were the only pads in surface contact when hanging upside down. Single-pad force measurements showed that the adhesion of euplantulae was extremely small, but friction forces strongly increased with normal load and coefficients of friction were [Formula: see text] 1. The pre-tarsal arolium, in contrast, generated adhesion that strongly increased with pulling forces, allowing adhesion to be activated and deactivated by shear forces, which can be produced actively, or passively as a result of the insects' sprawled posture. The shear-sensitivity of the arolium was present even when corrected for contact area, and was independent of normal preloads covering nearly an order of magnitude. Attachment of both heel and toe pads is thus activated partly by the forces that arise passively in the situations in which they are used by the insects, ensuring safe attachment. Our results suggest that stick insect euplantulae are specialised "friction pads" that produce traction when pressed against the substrate, while arolia are "true" adhesive pads that stick to the substrate when activated by pulling forces.