Synthesis and gas transport property of polyimide from 2,2 '-disubstituted biphenyltetracarboxylic dianhydrides (BPDA)

A series of dianhydride monomers, 2,2'-disubstituted-4,4',5,5'-biphenyltetracarboxylic dianhydride (substituents = phenoxy, p-methylphenoxy, p-tert-butylphenoxy, nitro, and methoxy) were synthesized by the nitration of an N-methyl protected 3,3',4,4'-biphenyttetracarboxylic dianhydride (BPDA) and subsequent aromatic nucleophilic substitutions with aroxides (NaOAr) or methoxide. These dianhydrides were polymerized with various aromatic diamines in refluxing m-cresol containing isoquinoline to afford a series of aromatic polyintides. The effects of varying 2,2'-substituents of the dianhydride (BPDA) moiety on the properties of polyimides were investigated. It was found that polyimides from the dianhydrides containing phenoxy, p-methylphenoxy, and p-tert-butylphenoxy side groups possessed excellent solubility and film forming capability whereas polyimides from 2,2'-dinitro-BPDA and 2,2'-dimethoxy-BPDA were less soluble in organic solvent. The soluble polymers formed flexible, tough and transparent films. The films had a tensile strength, elongation at break, and Young's modulus in the ranges 102-168 MPa, 8-21%, 2.02-2.38 GPa, respectively. The polymer gas permeability coefficients (P) and ideal selectivities for N-2, O-2, CO2 and CH4 were determined for the -OAr substituted polyimides. The oxygen permeability coefficient (P-O2) and permselectivity of oxygen to nitrogen (PO2/N-2) of the films were in the ranges 3.4-11.3 barrer and 3.8-4.6, respectively.

铈对ZA208合金组织和力学性能的影响

采用金属型铸造的方法制备了不同铈含量的Mg-20zn-8Al合金,研究了铈(Ce)对合金组织和力学性能的影响。结果表明,Ce的添加细化了合金晶粒,且添加1.39％Ce合金的晶粒细化效果最佳。铸态合金的相组成主要是a-Mg和t-Mg32(A1,Zn)49相,当Ce含量增加到1.39%时,合金中生成了杆状的Al4Ce相。添加Ce后台金的力学性能得到明显提 高,其中含1.0％Ce合金具有最高的力学性能,而且合金的延伸率也得到了改善。

A novel invariant and sequence comparison for DNA

We consider numerical characterization of DNA primary sequence based on the positions of bases (a, t, c, g) and the pairs of bases X, Y in DNA (X, Y=a, t, c, g). This leads to a representation of DNA by a numerical sequence. Then, we extract a novel invariant (molecular connectivity index) from the derived numerical sequences. The suitable invariant can offer a characterization of DNA primary sequence. Finally, we provide an illustration of its utility by making a comparison between ten DNA sequences belonging to beta-globin gene in different species. The evolutionary relationships of ten species we have revealed in this contribution accord with phylogenetic tree properly.

The electrocatalytic oxidation of ascorbic acid on polyaniline film synthesized in the presence of camphorsulfonic acid

Polyaniline-camphorsulfonic acid (PAN-CSA) composite film on platinum electrode surface has been synthesized via the electrochemical polymerization of aniline in the presence of camphorsulfonic acid (CSA). It was found that the doping of polyaniline (PAN) with CSA extends the electroactivity of PAN in neutral and even in alkaline media. The PAN-CSA composite film coated platinum electrodes are shown to be good electrocatalytic surfaces for the oxidation of ascorbic acid (AA) in phosphate buffer solution (PBS) of pH 7.0. The anodic peak potential of AA shifts from 0.63 V at the bare platinum electrode to 0.34 V at the PAN-CSA composite modified platinum electrode with a greatly enhanced current response. A linear calibration graph is obtained over the AA concentration range of 5-50 mM using cyclic voltammetry. The kinetics of the catalytic reaction are investigated using rotating disk electrode voltammetry and chronoamperometry. The results are explained using the theory of electrocatalytic reactions at chemically modified electrodes. The PAN-CSA composite on the electrode surface shows good reproducibility and stability.

一种手性性质随不同金属离子改变的共轭聚合物

化学传感器能识别一种特殊分子或一类分子的分子装置 ,基于共轭聚合物的化学传感器的设计原理一般都是利用其分子的电子效应和空间构象的变化 [1～ 4] ,而旋光分子的手性同样与其电子和空间结构相关 .本文试图建立一种依靠化合物手性 (如旋光度 )的变化检测金属离子的新方法 .由于含手性联萘结构的共轭聚合物具有较好的旋光热稳定性和高的旋光值 [5,6] ,以及聚合物主链上联吡啶基团可与许多过渡金属离子配位[4,7] ,我们设计合成了一种同时含有联吡啶和手性联萘基团的共轭聚合物 .结果表明 ,不同过渡金属离子与聚合物联吡啶单元的作用可引起聚合物吸收和发射光谱的变化 ,同时导致聚合物手性的变化 .1　实验部分1.1　仪器与试剂　 1 H NMR谱用 d-氯仿作溶剂 ,用四甲基硅烷作内标在 Varian3 0 0 MHz核磁仪上测定 ;红外光谱用 Bioard FTS-7傅里叶变换红外谱仪测定 ;凝胶凝透色谱 (GPC)用聚苯乙烯作标准 ,四氢呋喃作洗脱剂 ,在 Waters5 10仪器上测定 ;旋光度用 Perkin Elmer3 41LC型旋光仪测定 ;紫外 -可见光谱用 Varian Cray 5 0光谱仪测定 ;...

Phenolphthalein immobilized membrane for an optical pH sensor

A phenolphthalein immobilized cellulose membrane for an optical pH sensor was described. The phenolphthalein was first reacted with the formaldehyde to produce a series of prepolymers with many hydroxymethyl groups. In this paper, the prepolymers was abbreviated to phenolphthalein-formaldehyde (PPF). Then the PPF was covalently immobilized to the diacetylcellulose membrane via hydroxymethyl groups. Finally the membrane was hydrolyzed in the 0.1 M NaOH solution for 24 h to reduce the response time. Advantageous features of the pH-sensitive membrane include (a) a large dynamic range from pH 8.0 to 12.50, or even broader, (b) rapid response time (2-30 s), (c) easy of fabrication, and (d) a promising material for determination of high pH values. The immobilized PPF has a broader dynamic range from 8.0 to 12.50 than the free phenolphthalein from pH 8.0 to 11.0, and this was due to the newly produced methylenes in our investigation.

Hydrothermal synthesis and X-ray single crystal structure of bimetallic cluster complex [{Co(phen)(2)}(2)V4O12]center dot H2O

A new bimetallic cluster complex with the formula [{Co(phen)(2)}(2)V4O12](H2O)-H-. was synthesized from the hydrothermal reaction of V2O5, H2C2O4, Co(NO3)(2), 1,10-phenanthroline (phen), (C4H9)(4)NOH and water. The compound crystallizes in an orthorhombic system with space group Pbcn and unit cell parameters a = 19.106(3) Angstrom, b = 15.250(3) Angstrom, c = 16.321(2) Angstrom, V = 4755.4(13) Angstrom(3), Z = 4 and R = 0.0318. The bimetallic cluster complex [{Co(phen)(2)}(2)V4O12](H2O)-H-. is composed of a discrete V4O124- cluster eovalently attached to two [Co(phen)(2)](2+) fragments and the discrete hexanuclear bimetallic clusters of [{Co(phen)(2)}(V4O12)-V-2](H2O)-H-. are further extended into interesting three-dimensional supermolecular arrays via pi-pi stacking interactions of phen groups. Other characterizations by elemental analysis, IR, and thermal analysis are also described.

气相色谱-质谱中定量分析技术的应用

本文对气相色谱 -质谱 (GC- MS)定量分析技术及其在我国的应用进行了综述 ,较详细地阐述了峰匹配、质量色谱和选择离子检测 3种定量分析方法与应用 ,共引用文献 39篇

Synthesis and characterization of diblock copolymer of butadiene and 2-ethyl-2-oxazoline

By mechanism-transformation (anionic --> cationic) polymerization, diblock copolymer of butadiene and 2-ethyl-2-oxazoline (PBd-b-PEOx) was synthesized in two steps. The first step is the polymerization of butadiene block capped with ethylene oxide and its tosylation; the second step is the cationic ring-opening polymerization of 2-ethyl-2-oxazoline. The products were characterized by various methods, such as IR, (HNMR)-H-1, DMA, TEM and SAXS. The results show that the obtained copolymers possess high molecular weight and narrow molecular weighs distribution, and that the content of 1,4-structure was controllable.

Morphology and properties of [PPO-PDMS-PHS](n) segmented ternary copolymers

The morphology and properties of [ PPO-PDMS-PHS](n) segmented ternary copolymers were investigated by DMA, TEM and SAXS techniques. It is shown that the continuous phase of [PPO-PDMS-PHS](n) is the compatible phase composed of PDMS, PPO and PHS segments, and that there exist two dispersed phases, i, e. the PDMS phase and a mixed phase of half hard ( PHS) and hard ( PPO) segments. The tan delta vs. T curve of the segmented ternary copolymer with 66.7% (W/W) PDMS shows a rather high plateau in the temperature range from -120 degrees C to 200 degrees C, which indicates that the copolymer has the characteristics of microphase separation as well as compatibility of block copolymers, respectively. Meanwhile, it has good tensile properties, which means that [PPO-PDMS-PHS](n) has overcome the weakness of low strength of block or segmented copolymers containing PDMS.

PPO-PDMS-PHS_n三元多嵌段共聚物的形态结构和性能

利用DMA,TEM和SAXS对以聚苯醚(PPO)为硬段、聚对羟基苯乙烯(PHS)为半硬段和聚二甲基硅氧烷(PDMS)为软段的三元多嵌段共聚物(?)PPO-PDMS-PHS(?)_n的形态结构和性能进行了研究.结果表明,(?)PPO-PDMS-PHS(?)_n以三种嵌段相容相为连续相,PPO与PHS的相容相和PDMS相为两种分散相,其tanδ随温度变化曲线在-100℃至200℃一直是一很高的平台,并具有优异的力学性能,较好地解决了含有机硅类嵌段共聚物强度低的弱点,同时又保留了嵌段共聚物微相分离的特性.

(Z)-1[2-(苯基二溴化锡基)乙烯基]-1-环己醇的合成及晶体结构

报道了标题化合物〔C14H18Br2OSn〕的合成及晶体结构。该晶体属于单斜晶系，空间点群为P21/c，晶胞参数a=11.711(2)，b=9．114（2），c=16．864（3）A，β=102.94（1）°，V=1604.55（0）A3，Mr=480．78，Z=4，Dc=1．99g／cm3，u=65．20cm－1，F（000）=919，R=0．050，Rw=0．050．晶体结构由直接法解出。标题化合物分子中的锡原子被配体的2个碳、2个溴和1个氧原子配位，配位原子呈畸变的三角双锥构型，环已基为椅式构象，五员杂环为信封构象。

Ln(η~6-m-C_6H_4Me_2)(AlCl_4)_3,(Ln=Pr,Er)的合成及Pr配合物的晶体结构

ＬｎＣｌ３（Ｌｎ＝Ｐｒ，Ｅｒ）与ＡｌＣｌ３在二甲苯中反应，合成了η６－（ｍ－Ｍｅ２Ｃ６Ｈ４）Ｌｎ（ＡｌＣｌ４）３这两个新配合物并对其进行了元素分析、红外光谱和质谱的表征。测定了Ｐｒ配合物的晶体结构。该配合物具有扭曲的五角双锥几何构型。二甲苯和一个氯原子处于两个顶点，Ｐｒ配合物属单斜晶系，空间群Ｐ２１／ｎ，晶胞参数为ａ＝９．８７０（３），ｂ＝１６．７９４（８），ｃ＝１６．０２５（７），β＝９４．４０（３）°，Ｖ＝２６４８．５１３，Ｚ＝４。平均Ｐｒ－Ｃ为２．９５（２）。

CaAl_3BO_7:RE(RE=Ce,Gd,Tb)中稀土离子的光谱特性

采用固相反应法合成了ＣａＡｌ３ＢＯ７ＲＥ（ＲＥ＝Ｃｅ，Ｇｄ，Ｔｂ），研究了Ｃｅ３＋，Ｇｄ３＋和Ｔｂ３＋的光谱特性．发现铈离子周围存在较强的晶场，使基态的４ｆ能级劈裂较大，从而导致铈离子的特征发射峰重叠较大；Ｃｅ３＋的５ｄ能级明显低于Ｇｄ３＋的６Ｉ、６Ｐ能级；Ｃｅ３＋和Ｔｂ３＋之间存在有效的能量传递