Research Blogging: Indexing and Registering the Change in Science 2.0

Increasing public interest in science information in a digital and 2.0 science era promotes a dramatically, rapid and deep change in science itself. The emergence and expansion of new technologies and internet-based tools is leading to new means to improve scientific methodology and communication, assessment, promotion and certification. It allows methods of acquisition, manipulation and storage, generating vast quantities of data that can further facilitate the research process. It also improves access to scientific results through information sharing and discussion. Content previously restricted only to specialists is now available to a wider audience. This context requires new management systems to make scientific knowledge more accessible and useable, including new measures to evaluate the reach of scientific information. The new science and research quality measures are strongly related to the new online technologies and services based in social media. Tools such as blogs, social bookmarks and online reference managers, Twitter and others offer alternative, transparent and more comprehensive information about the active interest, usage and reach of scientific publications. Another of these new filters is the Research Blogging platform, which was created in 2007 and now has over 1,230 active blogs, with over 26,960 entries posted about peer-reviewed research on subjects ranging from Anthropology to Zoology. This study takes a closer look at RB, in order to get insights into its contribution to the rapidly changing landscape of scientific communication.

Agronomic characterization of banana mutants obtained by gamma radiation

Banana is one of the most economically important fruit, explored almost exclusively by small producers as a continuous source of food and income. Although Brazil is one of the main banana producers, the national banana production is undergoing serious problems especially in the phases of production and post-harvest limiting its participation in the international market. One of the main factors leading to great production losses is the toppling over due to the tall height of plants of main commercial cultivars. A strategy to solve this problem is reducing height by inducing mutation. The objective of the present work was to characterize irradiated Prata type banana mutants (cvs. Pacovan and Preciosa) during two production cycles in order to select short plants in height with good agronomic characteristics. In vitro plants of both cultivars were irradiated with gamma rays in the doses of 20 Gy ('Pacovan', 200 plants) and 30 Gy ( 'Preciosa', 200 plants) subcultivated four times and afterwards evaluated in the field during two production cycles. Four possible mutants were selected from each cultivar with height smaller than the average height of the controls after two evaluation cycles. It was observed that some of these mutants presented greater precocity and bunch weight compared to the controls. From the results obtained it is possible to select mutant plants with superior agronomic characteristics for 'Pacovan' as well as 'Preciosa' submitted to gamma radiation.

Development of advanced tools and methods for the assessment and management of risk due to atypical major accident scenarios

Proper hazard identification has become progressively more difficult to achieve, as witnessed by several major accidents that took place in Europe, such as the Ammonium Nitrate explosion at Toulouse (2001) and the vapour cloud explosion at Buncefield (2005), whose accident scenarios were not considered by their site safety case. Furthermore, the rapid renewal in the industrial technology has brought about the need to upgrade hazard identification methodologies. Accident scenarios of emerging technologies, which are not still properly identified, may remain unidentified until they take place for the first time. The consideration of atypical scenarios deviating from normal expectations of unwanted events or worst case reference scenarios is thus extremely challenging. A specific method named Dynamic Procedure for Atypical Scenarios Identification (DyPASI) was developed as a complementary tool to bow-tie identification techniques. The main aim of the methodology is to provide an easier but comprehensive hazard identification of the industrial process analysed, by systematizing information from early signals of risk related to past events, near misses and inherent studies. DyPASI was validated on the two examples of new and emerging technologies: Liquefied Natural Gas regasification and Carbon Capture and Storage. The study broadened the knowledge on the related emerging risks and, at the same time, demonstrated that DyPASI is a valuable tool to obtain a complete and updated overview of potential hazards. Moreover, in order to tackle underlying accident causes of atypical events, three methods for the development of early warning indicators were assessed: the Resilience-based Early Warning Indicator (REWI) method, the Dual Assurance method and the Emerging Risk Key Performance Indicator method. REWI was found to be the most complementary and effective of the three, demonstrating that its synergy with DyPASI would be an adequate strategy to improve hazard identification methodologies towards the capture of atypical accident scenarios.

Fruit ripening/scald relationship in apple

The ripening stage of apple fruits at harvest is the main factor influencing fruit quality during the cold storage period that lasts several months and give rise to physiological disorders in fruits of susceptible cultivars. In particular, superficial scald is connected to α-farnesene oxidation, leading to fruit browning. Therefore, the assessment of the optimal ripening stage at harvest is considered to be crucial to control the overall quality, the length of storage life and the scald incidence. However, the maturity indexes traditionally used in the horticultural practice do not strictly correlate with fruit maturity, and do not account for the variability occurring in the field. Hence, the present work focused on the determination of apple fruit ripening with the use of an innovative, non-destructive device, the DA-meter. The study was conducted on ‘Granny Smith’ and ‘Pink Lady’ cultivars, which differ in scald susceptibility. Pre- and post- harvest ripening behavior of the fruits was studied, and the influence of ripening stage and treatments with 1-MCP were evaluated in relation to scald development and related metabolites. IAD was shown to be a reliable indicator of apple ripening, allowing cultivar-specific predictions of the optimal harvest time in different growing seasons. IAD may also be employed to segregate apple fruits in maturity classes, requiring different storage conditions to control flesh firmness reduction and scald incidence. Moreover, 1-MCP application is extremely effective in reducing superficial scald, and its effect is influenced by fruit ripening stage reached at harvest. However, the relation between ethylene and α-farnesene was not entirely elucidated. Thus, ethylene can be involved in other oxidative processes associated with scald besides α-farnesene regulation.

Starch distribution in pear tree organs in relation to training systems, rootstocks and fruit quality

Starch is the main form in which plants store carbohydrates reserves, both in terms of amounts and distribution among different plant species. Carbohydrates are direct products of photosynthetic activity, and it is well know that yield efficiency and production are directly correlated to the amount of carbohydrates synthesized and how these are distributed among vegetative and reproductive organs. Nowadays, in pear trees, due to the modernization of orchards, through the introduction of new rootstocks and the development of new training systems, the understanding and the development of new approaches regarding the distribution and storage of carbohydrates, are required. The objective of this research work was to study the behavior of carbohydrate reserves, mainly starch, in different pear tree organs and tissues: i.e., fruits, leaves, woody organs, roots and flower buds, at different physiological stages during the season. Starch in fruit is accumulated at early stages, and reached a maximum concentration during the middle phase of fruit development; after that, its degradation begins with a rise in soluble carbohydrates. Moreover, relationships between fruit starch degradation and different fruit traits, soluble sugars and organic acids were established. In woody organs and roots, an interconversion between starch and soluble carbohydrates was observed during the dormancy period that confirms its main function in supporting the growth and development of new tissues during the following spring. Factors as training systems, rootstocks, types of bearing wood, and their position on the canopy, influenced the concentrations of starch and soluble carbohydrates at different sampling dates. Also, environmental conditions and cultural practices must be considered to better explain these results. Thus, a deeper understanding of the dynamics of carbohydrates reserves within the plant could provide relevant information to improve several management practices to increase crop yield efficiency.

Thermoelectric performance of p-type TiCoSb half-Heusler compounds - Intrinsic phase separation and charge carrier concentration optimization as key to high efficiency

The world's rising demand of energy turns the development of sustainable and more efficient technologies for energy production and storage into an inevitable task. Thermoelectric generators, composed of pairs of n-type and p-type semiconducting materials, di¬rectly transform waste heat into useful electricity. The efficiency of a thermoelectric mate¬rial depends on its electronic and lattice properties, summarized in its figure of merit ZT. Desirable are high electrical conductivity and Seebeck coefficients, and low thermal con¬ductivity. Half-Heusler materials are very promising candidates for thermoelectric applications in the medium¬ temperature range such as in industrial and automotive waste heat recovery. The advantage of Heusler compounds are excellent electronic properties and high thermal and mechanical stability, as well as their low toxicity and elemental abundance. Thus, the main obstacle to further enhance their thermoelectric performance is their relatively high thermal conductivity.rn rnIn this work, the thermoelectric properties of the p-type material (Ti/Zr/Hf)CoSb1-xSnx were optimized in a multistep process. The concept of an intrinsic phase separation has recently become a focus of research in the compatible n-type (Ti/Zr/Hf)NiSn system to achieve low thermal conductivities and boost the TE performance. This concept is successfully transferred to the TiCoSb system. The phase separation approach can form a significant alternative to the previous nanostructuring approach via ball milling and hot pressing, saving pro¬cessing time, energy consumption and increasing the thermoelectric efficiency. A fundamental concept to tune the performance of thermoelectric materials is charge carrier concentration optimization. The optimum carrier concentration is reached with a substitution level for Sn of x = 0.15, enhancing the ZT about 40% compared to previous state-of-the-art samples with x = 0.2. The TE performance can be enhanced further by a fine-tuning of the Ti-to-Hf ratio. A correlation of the microstructure and the thermoelectric properties is observed and a record figure of merit ZT = 1.2 at 710°C was reached with the composition Ti0.25Hf0.75CoSb0.85Sn0.15.rnTowards application, the long term stability of the material under actual conditions of operation are an important issue. The impact of such a heat treatment on the structural and thermoelectric properties is investigated. Particularly, the best and most reliable performance is achieved in Ti0.5Hf0.5CoSb0.85Sn0.15, which reached a maximum ZT of 1.1 at 700°C. The intrinsic phase separation and resulting microstructure is stable even after 500 heating and cooling cycles.

Assessing visual disturbance conditions on the Custer National Forest

Assessment of soil disturbance on the Custer National Forest was conducted during two summers to determine if the U.S. Forest Service Forest Soil Disturbance Monitoring Protocol (FSDMP) was able to distinguish post-harvest soil conditions in a chronological sequence of sites harvested using different ground-based logging systems. Results from the first year of sampling suggested that the FSDMP point sampling method may not be sensitive enough to measure post-harvest disturbance in stands with low levels of disturbance. Therefore, a revised random transect method was used during the second sampling season to determine the actual extent of soil disturbance in these cutting units. Using combined data collected from both summers I detected statistically significant differences (p < 0.05) in fine fraction bulk density measurements between FSDMP disturbance classes across all sites. Disturbance class 3 (most severe) had the highest reported bulk density, which suggest that the FSDMP visual class estimates are defined adequately allowing for correlations to be made between visual disturbance and actual soil physical characteristics. Forest site productivity can be defined by its ability to retain carbon and convert it to above- and belowground biomass. However, forest management activities that alter basic site characteristics have the potential to alter productivity. Soil compaction is one critical management impact that is important to understand; compaction has been shown to impede the root growth potential of plants, reduce water infiltration rates increasing erosion potential, and alter plant available water and nutrients, depending on soil texture. A new method to assess ground cover, erosion, and other soil disturbances was recently published by the U.S. Forest Service, as the Forest Soil Disturbance Protocol (FSDMP). The FSDMP allows soil scientists to visually assign a disturbance class estimate (0 – none, 1, 2, 3 – severe) from field measures of consistently defined soil disturbance indicators (erosion, fire, rutting, compaction, and platy/massive/puddled structure) in small circular (15 cm) plots to compare soil quality properties pre- and post- harvest condition. Using this protocol we were able to determine that ground-based timber harvesting activities occurring on the Custer National Forest are not reaching the 15% maximum threshold for detrimental soil disturbance outlined by the Region 1 Soil Quality Standards.

INTEGRATED MANAGEMENT OF THE INVASIVE SPECIES CIRSIUM ARVENSE, CANADA THISTLE, AND PHRAGMITES AUSTRALIS, COMMON REED: USING ECOLOGICALLY BASED CONTROL MEASURES AT EACH STAGE OF THE INVASION PROCESS

Invasive plant species threaten natural areas by reducing biodiversity and altering ecosystem functions. They also impact agriculture by reducing crop and livestock productivity. Millions of dollars are spent on invasive species control each year, and traditionally, herbicides are used to manage invasive species. Herbicides have human and environmental health risks associated with them; therefore, it is essential that land managers and stakeholders attempt to reduce these risks by utilizing the principles of integrated weed management. Integrated weed management is a practice that incorporates a variety of measures and focuses on the ecology of the invasive plant to manage it. Roadways are high risk areas that have high incidence of invasive species. Roadways act as conduits for invasive species spread and are ideal harborages for population growth; therefore, roadways should be a primary target for invasive species control. There are four stages in the invasion process which an invasive species must overcome: transport, establishment, spread, and impact. The aim of this dissertation was to focus on these four stages and examine the mechanisms underlying the progression from one stage to the next, while also developing integrated weed management strategies. The target species were Phragmites australis, common reed, and Cisrium arvense, Canada thistle. The transport and establishment risks of P. australis can be reduced by removing rhizome fragments from soil when roadside maintenance is performed. The establishment and spread of C. arvense can be reduced by planting particular resistant species, e.g. Heterotheca villosa, especially those that can reduce light transmittance to the soil. Finally, the spread and impact of C. arvense can be mitigated on roadsides through the use of the herbicide aminopyralid. The risks associated with herbicide drift produced by application equipment can be reduced by using the Wet-Blade herbicide application system.

Factors Affecting Post-Capture Survivability of Lobster Homarus Americanus

Technological advances in gear and fishing practices have driven the global expansion of the American lobster live seafood market. These changes have had a positive effect on the lobster industry by increasing capture efficiency. However, it is unknown what effect these improved methods will have on the post-capture fitness and survival of lobsters. This project utilized a repeated measures design to compare the physiological changes that occur in lobsters over time as the result of differences in depth, hauling rate, and storage methodology. The results indicate that lobsters destined for long distance transport or temporary storage in pounds undergo physiological disturbance as part of the capture process. These changes are significant over time for total hemocyte counts, crustacean hyperglycemic hormone, L-lactate, ammonia, and glucose. Repeated measures multivariate analysis of variance (MANOVA) for glucose indicates a significant interaction between depth and storage methodology over time for non-survivors. A Gram-negative bacterium, Photobacterium indicum, was identified in pure culture from hemolymph samples of 100% of weak lobsters. Histopathology revealed the presence of Gram-negative bacteria throughout the tissues with evidence of antemortem edema and necrosis suggestive of septicemia. On the basis of these findings, we recommend to the lobster industry that if a reduction in depth and hauling rate is not economically feasible, fishermen should take particular care in handling lobsters and provide them with a recovery period in recirculating seawater prior to land transport. The ecological role of P. indicum is not fully defined at this time. However, it may be an emerging opportunistic pathogen of stressed lobsters. Judicious preemptive antibiotic therapy may be necessary to reduce mortality in susceptible lobsters destined for high-density holding facilities.

Duraznos O'Henry : impacto económico por pérdidas de calidad

El durazno O'Henry para consumo en fresco es una variedades apta para la exportación. Consecuentemente se propone un método sencillo para determinar las pérdidas de calidad que impiden obtener mejores precios en los mercados.. Las mismas se relacionan con una mala gestión en todos los niveles: producción, empaque y comercialización, y la deficiente capacitación del personal involucrado. En la temporada 1999/2000 el granizo fue la causa más frecuente en precosecha; sus marcas explican el 70 % de los frutos con falta de calidad. En cambio, el principal factor en cosecha fueron las picaduras de grafolita, dando 80 % de frutos sin calidad exportable. En galpón de empaque, el mal manejo poscosecha -revelado en machucones, marcas de uñas y rajaduras- originó el 30 % de las causas de no calidad; si se le agregan las picaduras de grafolita, el porcentaje se aproxima al 60 %. Ambas causas pueden minimizarse con buena planificación y capacitación. Con simulación económica se detectó -en la precitada temporada- 20 % de pérdida de calidad de una partida lo cual motiva una disminución superior al 13 % en los ingresos. Esta diferencia depende no sólo del peso relativo de las distintas calidades sino también del precio pactado.

Parámetros biológicos y demograficos de áfidos (Hemiptera: aphididae) en variedades de colza canola (Brassica napus L.)

Myzus persicae (Sulz.), Brevicoryne brassicae L. y Lipaphis erysimi (Kalt.) constituyen plagas del cultivo de colza canola, Brassica napus L., y de otras crucíferas cultivadas. Los pulgones fueron colectados en un cultivo de canola y se multiplicaron en un insectario. Para el estudio se criaron 2 cohortes de 20 hembras neonatas, para cada especie de áfido y cultivar de colza, a 20 ± 1°C, 60-70% de humedad relativa y 14:10 horas de fotofase. Las principales diferencias entre especies de pulgones se observaron en la duración de los períodos reproductivo y post-reproductivo, la longevidad y la fecundidad. M. persicae fue el áfido más longevo y fecundo en Impact, mientras que en Teddy el más fecundo fue L. erysimi y el más longevo M. persicae. Con respecto a los parámetros poblacionales, la mayor tasa de incremento poblacional (R0) fue de 58,43 (♀/♀/generación) para M. persicae en Impact. En cambio en Teddy la mayor R0 (63,17) fue para L. erysimi. La tasa intrínseca de crecimiento natural (rm) más elevada fue para L. erysimi en Teddy (0,29 ♀/♀/día) y para M. persicae en Impact (0,24 ♀/♀/día). Estos estudios indican que, de acuerdo con el cultivar de colza empleado, teniendo en cuenta la tasa de crecimiento poblacional de las diferentes especies de pulgones, se podría inferir cuál será la especie dominante y el daño potencial que ocasionarían al cultivo.

Efecto del momento de cosecha sobre la calidad hortícola del topinambur (Helianthus tuberosus L.) conservado en cámara frigorífica

El interés por el cultivo de Topinambur (Helianthus tuberosus L.) es creciente a nivel mundial. Como toda hortaliza que se lleva al mercado, o se utiliza como materia prima para la industria, debe estar disponible a lo largo de todo el año. Por esto es importante desarrollar sistemas de almacenamiento que permitan conservar la calidad del producto el mayor tiempo posible. Existen muy pocos antecedentes sobre la conservación poscosecha de tubérculos de topinambur y las variaciones de calidad, que sufre el producto. A través del trabajo de tesis se buscó generar antecedentes sobre los efectos de la fecha de cosecha y la variedad de topinambur sobre las diferentes variables de calidad; la evolución de cada tratamiento conservado en cámara frigorífica y el efecto del lugar/condiciones (cámara frigorífica – campo) y tiempo de conservación sobre la calidad de los tubérculos. Se utilizaron dos variedades de topinambur (tubérculos rojos y blancos). Las variables respuesta ensayadas para definir atributos de calidad fueron: materia seca, sólidos solubles, firmeza, índice de color de piel y de pulpa, presencia de brotes, desarrollo de Penicillium y evolución del peso fresco. Se detectó que el período de cosecha, para garantizar la calidad de los tubérculos y buena evolución en cámara frigorífica durante todo el año, no debería extenderse más allá de los 49 días desde la ocurrencia de la primera helada para la zona de estudio, no observándose diferencias entre variedades. Para consumo en fresco se puede cosechar hasta el 98 días luego de la primera helada, pero estos tubérculos no se conservan correctamente en cámara frigorífica.

Entre puertos, campos y acopios : Trabajo y transporte de granos en torno al Sudeste bonaerense

En este artículo, se analiza el proceso de trabajo en el transporte automotor de granos en torno al sudeste bonaerense. Desde un abordaje cualitativo, se describen y analizan las prácticas durante la cosecha y pos-cosecha, y los trayectos campo-acopio, acopio-puerto. También se analizan las relaciones laborales a partir de una perspectiva ampliada de las relaciones laborales clásicas (asalariadas, estables, protegidas).Los rasgos que asume el trabajo en el transporte de granos están asociados a los cambios técnicos y tecnológicos de la producción de granos, así como a procesos de flexibilización laboral, vinculados a la disponibilidad permanente para fletar, la extensión de la jornada laboral y la intensidad del trabajo camionero

Patrimonio y producción en los entornos rurales de Buenos Aires. San José de Flores, 1800-1875

En el presente artículo reconstruimos a partir de la información proporcionada por testamentos e inventarios post mortem las características productivas de los establecimientos frutihortícolas y cerealeros del partido de San José de Flores. Abordamos, además, el estudio de los esquemas de inversión de los propietarios y/o arrendatarios de estas unidades esbozando su perfil socioeconómico y político, deteniéndonos especialmente en aquellos que han accedido a la propiedad legal de los terrenos.

Entre puertos, campos y acopios : Trabajo y transporte de granos en torno al Sudeste bonaerense

En este artículo, se analiza el proceso de trabajo en el transporte automotor de granos en torno al sudeste bonaerense. Desde un abordaje cualitativo, se describen y analizan las prácticas durante la cosecha y pos-cosecha, y los trayectos campo-acopio, acopio-puerto. También se analizan las relaciones laborales a partir de una perspectiva ampliada de las relaciones laborales clásicas (asalariadas, estables, protegidas).Los rasgos que asume el trabajo en el transporte de granos están asociados a los cambios técnicos y tecnológicos de la producción de granos, así como a procesos de flexibilización laboral, vinculados a la disponibilidad permanente para fletar, la extensión de la jornada laboral y la intensidad del trabajo camionero