ZONIFICACIÓN FUNCIONAL ECOTURÍSTICA DE LA ZONA COSTERA DE MICHOACÁN, MÉXICO A ESCALA 1:250 000

Esta investigación se desarrolló en la zona costera del estado de Michoacán, el objetivo fundamental es obtener la zonificación funcional ecoturística de la zona costera de Michoacán, México a partir de la clasificación tipológica de los paisajes costeros. Sobre la base del mapa de paisajes físico-geográficos a escala 1:250 000, se calcularon indicadores de heterogeneidad geoecológica y se realizó una recopilación biblio-cartográfica sobre la biodiversidad del territorio. Se diseñaron modelos teóricos de máximo potencial natural para la realización de actividades ecoturísticas y se calculó la similitud de cada geocomplejo con el modelo; mediante un análisis de conglomerados se obtuvo la zonificación funcional ecoturística; para su representación cartográfica se emplearon los métodos de fondo cualitativo, numéricos y símbolos pictóricos. La propuesta de zonificación funcional ecoturística para la costa de Michoacán, permite conocer la distribución del potencial natural del territorio para el ecoturismo, destacando la observación de aves, contemplación de paisajes y senderismo; además, existen potencialidades para algunas actividades de turismo de aventura como el espeleoturismo y la escalada en roca. No obstante la escala regional 1:250 000 de la investigación; esta ofrece una base sustentable para la planificación territorial del ecoturismo de una región con alta diversidad biológica y cultural como la costa de Michoacán.

Zoneamento pedoclimático da mesorregião da Chapada do Araripe: levantamento de reconhecimento de baixa e média intensidade dos solos da folha Crato - (Escala 1:100.000).

Este trabalho tem como objetivo o levantamentos de solos, em nível de reconhecimento de baixa e média intensidade na área abrangida pela folha do Crato, na Chapada do Araripe, no Estado do Ceará. A área de estudo tem extensão cerca de 3.000 km2, com solos e condições geoambientais diferenciados, desde a zona úmida da chapada até a zona semi-árida. Na zona úmida, distinguem-se dois tipos extremos de formas de relevo, o plano no topo da chapada e o relevo ondulado, nas encostas. Já na zona semi-árida, de relevo aplainado, ocorrem as variações de semi-aridez menos intensa (com caatinga hipoxerófila) e mais intensa (caatinga hiperxerófila). O mapa foi elaborado com base em suas conceituações taxonômicas e suas diversas injunções de caráter edafoclimático e geomórfico. A necessidade de planejamento das atividades agrícolas, com base no conhecimento dos recursos naturais disponíveis, em escala compatível, será importante para a exploração auto-sustentável. Foi elaborado um mapa em nível de reconhecimento de baixa e média intensidade, com escala de apresentação da ordem de 1:100.000. Os Neossolos Litólicos ocupam a maior extensão (38,46%), distribuídos nos pediplanos e nas serras e serrotes residuais. Em segundo lugar ocorrem Argissolos Vermelho-Amarelos e Vermelhos. Em terceira posição os Latossolos Amarelos de relevo plano e suave ondulado e os Latossolos Vermelho Amarelos (geralmente de encostas ou ocupando parte dos tabuleiros baixos associados aos Argissolos e Neossolos Quartzarênicos). Em proporções menores ocorrem os Neossolos Flúvicos (com cultivo de cana-de-açúcar), seguidos pelos Neossolos Quartzarênicos e os Vertissolos.

ACTIVIDAD SISMICA DE CARACTER SUPERFICIAL REGISTRADA POR LA RED SISMOGRÁFICA DEL OVSICORI-UNA EN LA HOJA DE SAN JOSE 1:200.000 ENTRE ABRIL 1984 - JULIO 1988

Este trabajo es el resultado del análisis de la información existente, registrada por el OVSICORI-UNA para la región del Valle Central de Costa Rica (Hoja San José, escala 1:200.000).  Históricamente el Valle Central ha sufrido por la acción de varios terremotos.  Entre los más dañinos podemos citar el de Cartago de 1841, el de Fraijanes de 1888, el de Cartago de 1910, el de Sarchí de 1912, el de Patillos de 1952 y el de los del Bajos del Toro en 1955.  Esta actividad asociada a fallas de carácter superficial (z 15 km) y con magnitudes moderadas mb 6.5, muy probablemente se volverá a presentar en el futuro, en igual forma en que se han visto afectada la ciudad de San Salvador en la hermana república de El Salvador.  Es, por lo tanto, de vital importancia investigar conocer y evaluar la existencia de las fallas que han ocasionado dichos terremotos. 

Injury prevention in Queensland : report to Queensland Injury Prevention Council

Injury is the fourth leading cause of death in Australia. Injury rates in Queensland are amongst the highest in Australia and 21.5% of people surveyed for this research reported that their lifestyle or that of an immediate family member had been permanently affected by injury. Injury results in over 40,000 hospital admissions and 200,000 attendances at hospital Emergency Departments in Queensland each year. Queensland's death rate from injuries is higher than the national average, with consistently higher rates of deaths related to transport injuries. Queensland statistics also show higher than national average rates of injuries due to falls, homicide and accidental drowning. (Pike, Muller, Baade & Ward, 2000) In 2000-01 injuries represented over $4 billion (or 8%) of total health system expenditure, and 185,000 disability-adjusted life years (DALYs), or 7% of the total morbidity burden of disease and injury in Australia in 2003. (Begg, Vos, Barker, Stevenson, Stanley & Lopez, 2007). Injury is one of seven key health areas identified by the Commonwealth, state and territory governments for priority attention as National Health Priority Areas

Teacher-child relationship quality for young children with parent reported language concerns

Previous research has demonstrated the importance of the qualities of the teacher-child relationship on children’s development. Close teacher-child relationships are especially important for children at risk. Positive relationships have been shown to have beneficial effects on children’s social and academic development (Birch & Ladd, 1997; Pianta & Stuhlman, 2004). Children with language difficulties are likely to face increased risks with regard to long term social and academic outcomes. The purpose of the current research was to gain greater understanding of the qualities of teacher-child relationships for young children with parent reported language concerns. The research analyses completed for this thesis involved the use of data from the public-access database of Growing Up in Australia: The Longitudinal Study of Australian Children (LSAC). LSAC is a longitudinal study involving a nationally representative sample of 10,000 Australian children. Data are being collected biennially from 2004 (Wave 1 data collection) until 2010 (Wave 4 data collection). LSAC has a cross-sequential research design involving two cohorts, an infant cohort (0-1 year at age of recruitment) and a kindergarten cohort (4-5 years at age of recruitment). Two studies are reported in this thesis using data for the LSAC Kindergarten Cohort which had 4983 child participants at recruitment. Study 1 used Wave 1 data to identify the differences between teacher-child relationship qualities for children with parent reported language concerns and their peers. Children identified by parents for whom concerns were held about their receptive and expressive language, as measured by items from the Parents’ Evaluation of Developmental Status (PEDS) (Glascoe, 2000) were the target (at risk) group in the study (n = 210). A matched case control group of peers (n = 210), matched on the child characteristics of sex, age, cultural and linguistic differences (CALD), and socio-economic positioning (SEP), were the comparison group for this analysis. Teacher-child relationship quality was measured by teacher reports on the Closeness and Conflict scales from the short version of the Student-Teacher Relationship Scale (STRS) (Pianta, 2001). There were statistically significant differences in the levels of closeness and conflict between the two groups. The target group had relationships with their teachers that had lower levels of closeness and higher levels of conflict than the control group. Study 2 reports analyses that examined the stability of the qualities of the teacher-child relationships at Wave 1 (4-5 years) and the qualities of the teacher-child relationships at Wave 2 (6-7 years). This time frame crosses the period of the children’s transition to school. The study examined whether early patterns in the qualities of the teacher-child relationship for children with parent reported language concerns at Wave 1 predicted the qualities of the teacher-child relationship outcomes in the early years of formal school. The sample for this study consisted of the group of children identified with PEDS language concerns at Wave 1 who also had teacher report data at Wave 2 (n = 145). Teacher-child relationship quality at Wave 1 and Wave 2 was again measured by the STRS scales of Closeness and Conflict. Results from multiple regression models indicated that teacher-child relationship quality at Wave 1 significantly contributed to the prediction of the quality of the teacher-child relationship at Wave 2, beyond other predictor variables included in the regression models. Specifically, Wave 1 STRS Closeness scores were the most significant predictor for STRS Closeness scores at Wave 2, while Wave 1 STRS Conflict scores were the only significant predictor for Wave 2 STRS Conflict outcomes. These results indicate that the qualities of the teacher-child relationship experienced prior to school by children with parent reported language concerns remained stable across transitions into formal schooling at which time the child had a different teacher. The results of these studies provide valuable insight into the nature of teacher-child relationship quality for young children with parent reported language concerns. These children experienced teacher-child relationships of a lower quality when compared with peers and, additionally, the qualities of these relationships prior to formal schooling were predictive of the qualities of the relationships in the early years of formal schooling. This raises concerns, given the increased risks of poorer social and academic outcomes already faced by children with language difficulties, that these early teacher-child relationships have an impact on future teacher-child relationships. Results of these studies are discussed with these considerations in mind and also discussed in terms of the implications for educational theory, policy and practice.

‘Beijing bling’: creative details and consumer choices in contemporary China : an interview with Hung Huang

This edited interview with Hung Huang, CEO of China Interactive Media Group (CIMG), was conducted by Lucy Montgomery in Beijing on 12 August 2005. It was done as part of the ARC Discovery research project, Internationalising Creative Industries: China, the WTO and the Knowledge Economy, led by John Hartley. That project is investigating the development of creative industries in China by focusing on a number of creative services including fashion magazines. Huang’s group publishes five fashion magazines in China, including i-Look, Youth International (Qingnian Yizu), which is the Chinese edition of Seventeen (originally founded by TV-Guide mogul Walter Annenberg), and the Beijing and Shanghai versions of London’s Time Out. It also produces TV programs under the same media brands. The company is based in the stylish Bauhaus-designed former factory 798-Space in the district of Dashanzi, Beijing (see www.798space.com). Huang went to school in Greenwich Village and graduated from Vassar College in New York. She is the daughter of Zhang Hanzhi, who was Mao Zedong’s personal English teacher, and stepdaughter of Qiao Guanhua, Foreign Minister of China during the 1970s at the time of the Nixon visit. Her book My Abnormal Life sold 200,000 copies in China.

Third-sector discourses and the future of (un)employment : skilled labor, new technologies, and the meaning of work

In this paper we analyse a 600,000 word corpus comprised of policy statements produced within supranational, national, state and local legislatures about the nature and causes of(un)employment. We identify significant rhetorical and discursive features deployed by third sector (un)employment policy authors that function to extend their legislative grasp to encompass the most intimate aspects of human association.

Quality-based benefit design in health insurance : the impact of a product benefit design change on the utilisation of oral health services by members of a private health insurance fund in regional and rural New South Wales, Australia

Objective: To examine the impact on dental utilisation following the introduction of a participating provider scheme (Regional and Rural Oral Health Program {RROHP)). In this model dentists receive higher third party payments from a private health insurance fund for delivering an agreed range of preventive and diagnostic benefits at no out-ofpocket cost to insured patients. Data source/Study setting: Hospitals Contribution Fund of Australia (HCF) dental claims for all members resident in New South Wales over the six financial years from l99811999 to 200312004. Study design: This cohort study involves before and after analyses of dental claims experience over a six year period for approximately 81,000 individuals in the intervention group (HCF members resident in regional and rural New South Wales, Australia) and 267,000 in the control group (HCF members resident in the Sydney area). Only claims for individuals who were members of HCF at 31 December 1997 were included. The analysis groups claims into the three years prior to the establishment of the RROHP and the three years subsequent to implementation. Data collection/Extraction methods: The analysis is based on all claims submitted by users of services for visits between 1 July 1988 and 30 June 2004. In these data approximately 1,000,000 services were provided to the intervention group and approximately 4,900,000 in the control group. Principal findings: Using Statistical Process Control (SPC) charts, special cause variation was identified in total utilisation rate of private dental services in the intervention group post implementation. No such variation was present in the control group. On average in the three years after implementation of the program the utilisation rate of dental services by regional and rural residents of New South Wales who where members of HCF grew by 12.6%, over eight times the growth rate of 1.5% observed in the control group (HCF members who were Sydney residents). The differences were even more pronounced in the areas of service that were the focus of the program: diagnostic and preventive services. Conclusion: The implementation of a benefit design change, a participating provider scheme, that involved the removal of CO-payments on a defined range of preventive and diagnostic dental services combined with the establishment and promotion of a network of dentists, appears to have had a marked impact on HCF members' utilisation of dental services in regional and rural New South Wales, Australia.

Defining the flammability of cylindrical metal rods through characterization of the thermal effects of the ignition promoter

All relevant international standards for determining if a metallic rod is flammable in oxygen utilize some form of “promoted ignition” test. In this test, for a given pressure, an overwhelming ignition source is coupled to the end of the test sample and the designation flammable or nonflammable is based upon the amount burned, that is, a burn criteria. It is documented that (1) the initial temperature of the test sample affects the burning of the test sample both (a) in regards to the pressure at which the sample will support burning (threshold pressure) and (b) the rate at which the sample is melted (regression rate of the melting interface); and, (2) the igniter used affects the test sample by heating it adjacent to the igniter as ignition occurs. Together, these facts make it necessary to ensure, if a metallic material is to be considered flammable at the conditions tested, that the burn criteria will exclude any region of the test sample that may have undergone preheating during the ignition process. A two-dimensional theoretical model was developed to describe the transient heat transfer occurring and resultant temperatures produced within this system. Several metals (copper, aluminum, iron, and stainless steel) and ignition promoters (magnesium, aluminum, and Pyrofuze®) were evaluated for a range of oxygen pressures between 0.69 MPa (100 psia) and 34.5 MPa (5,000 psia). A MATLAB® program was utilized to solve the developed model that was validated against (1) a published solution for a similar system and (2) against experimental data obtained during actual tests at the National Aeronautics and Space Administration White Sands Test Facility. The validated model successfully predicts temperatures within the test samples with agreement between model and experiment increasing as test pressure increases and/or distance from the promoter increases. Oxygen pressure and test sample thermal diffusivity were shown to have the largest effect on the results. In all cases evaluated, there is no significant preheating (above about 38°C/100°F) occurring at distances greater than 30 mm (1.18 in.) during the time the ignition source is attached to the test sample. This validates a distance of 30 mm (1.18 in.) above the ignition promoter as a burn length upon which a definition of flammable can be based for inclusion in relevant international standards (that is, burning past this length will always be independent of the ignition event for the ignition promoters considered here. KEYWORDS: promoted ignition, metal combustion, heat conduction, thin fin, promoted combustion, burn length, burn criteria, flammability, igniter effects, heat affected zone.

Venture idea newness, relatedness and performance in nascent ventures

Principal Topic The study of the origin and characteristics of venture ideas - or ''opportunities'' as they are often called - and their contextual fit are key research goals in entrepreneurship (Davidsson, 2004). We define venture idea as ''the core ideas of an entrepreneur about what to sell, how to sell, whom to sell and how an entrepreneur acquire or produce the product or service which he/she sells'' for the purpose of this study. When realized the venture idea becomes a ''business model''. Even though venture ideas are central to entrepreneurship yet its characteristics and their effect to the entrepreneurial process is mysterious. According to Schumpeter (1934) entrepreneurs could creatively destruct the existing market condition by introducing new product/service, new production methods, new markets, and new sources of supply and reorganization of industries. The introduction, development and use of new ideas are generally called as ''innovation'' (Damanpour & Wischnevsky, 2006) and ''newness'' is a property of innovation and is a relative term which means that the degree of unfamiliarity of venture idea either to a firm or to a market. However Schumpeter's (1934) discusses five different types of newness, indicating that type of newness is an important issue. More recently, Shane and Venkataraman (2000) called for research taking into consideration not only the variation of characteristics of individuals but also heterogeneity of venture ideas, Empirically, Samuelson (2001, 2004) investigated process differences between innovative venture ideas and imitative venture ideas. However, he used only a crude dichotomy regarding the venture idea newness. According to Davidsson, (2004) as entrepreneurs could introduce new economic activities ranging from pure imitation to being new to the entire world market, highlighting that newness is a matter of degree. Dahlqvist (2007) examined the venture idea newness and made and attempt at more refined assessment of the degree and type of newness of venture idea. Building on these predecessors our study refines the assessment of venture idea newness by measuring the degree of venture idea newness (new to the world, new to the market, substantially improved while not entirely new, and imitation) for four different types of newness (product/service, method of production, method of promotion, and customer/target market). We then related type and degree of newness to the pace of progress in nascent venturing process. We hypothesize that newness will slow down the business creation process. Shane & Venkataraman (2000) introduced entrepreneurship as the nexus of opportunities and individuals. In line with this some scholars has investigated the relationship between individuals and opportunities. For example Shane (2000) investigates the relatedness between individuals' prior knowledge and identification of opportunities. Shepherd & DeTinne (2005) identified that there is a positive relationship between potential financial reward and the identification of innovative venture ideas. Sarasvathy's 'Effectuation Theory'' assumes high degree of relatedness with founders' skills, knowledge and resources in the selection of venture ideas. However entrepreneurship literature is scant with analyses of how this relatedness affects to the progress of venturing process. Therefore, we assess the venture ideas' degree of relatedness to prior knowledge and resources, and relate these, too, to the pace of progress in nascent venturing process. We hypothesize that relatedness will increase the speed of business creation. Methodology For this study we will compare early findings from data collected through the Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE). CAUSEE is a longitudinal study whose primary objective is to uncover the factors that initiate, hinder and facilitate the process of emergence and development of new firms. Data were collected from a representative sample of some 30,000 households in Australia using random digit dialing (RDD) telephone survey interviews. Through the first round of data collection identified 600 entrepreneurs who are currently involved in the business start-up process. The unit of the analysis is the emerging venture, with the respondent acting as its spokesperson. The study methodology allows researchers to identify ventures in early stages of creation and to longitudinally follow their progression through data collection periods over time. Our measures of newness build on previous work by Dahlqvist (2007). Our adapted version was developed over two pre-tests with about 80 participants in each. The measures of relatedness were developed through the two rounds of pre-testing. The pace of progress in the venture creation process is assessed with the help of time-stamped gestation activities; a technique developed in the Panel Study of Entrepreneurial Dynamics (PSED). Results and Implications We hypothesized that venture idea newness slows down the venturing process whereas relatedness facilitates the venturing process. Results of 600 nascent entrepreneurs in Australia indicated that there is marginal support for the hypothesis that relatedness assists the gestation progress. Newness is significant but is the opposite sign to the hypothesized. The results give number of implications for researchers, business founders, consultants and policy makers in terms of better knowledge of the venture creation process.

Safer construction : the development of a voluntary code of practice to improve safety performance in the Australian construction industry

In Australia, between 1994 and 2000, 50 construction workers were killed each year as a result of their work, the industry fatality rate, at 10.4 per 100,000 persons, is similar to the national road toll fatality rate and the rate of serious injury is 50% higher than the all industries average. This poor performance represents a significant threat to the industry’s social sustainability. Despite the best efforts of regulators and policy makers at both State and Federal levels, the incidence of death, injury and illness in the Australian construction industry has remained intransigently high, prompting an industry-led initiative to improve the occupational health and safety (OHS) performance of the Australian construction industry. The ‘Safer Construction’ project involves the development of an evidence-based Voluntary Code of Practice for OHS in the industry.

Forecasting trends in the Brisbane central business district office market

The Queensland Department of Public Works (DPW) holds a significant interest in the Brisbane Central Business District (CBD) in controlling approximately 20 percent of the office space within its confines. This comprises a total of 333,903 square metres of space, of which 170,111 square metres is owned and 163,792 square metres is leased from the private sector. The department’s nominal ownership extends to several enduring, landmark buildings as well as several modern office towers. The portfolio includes the oldest building in the CBD, being the former Commissariat Stores building and one of the newest, a 15,000 square metre office tower under construction at 33 Charlotte Street.

Monitoring the Australian Blogosphere through the 2007 Australian Federal Election

This paper examines the observable patterns of content creation by Australian political bloggers dur‐ing the 2007 election and its aftermath, thereby providing insight into the level and nature of activity in the Australian political blogosphere during that time. The performance indicators which are identi‐fied through this process enable us to target for further in‐depth research, to be reported in subse‐quent papers, those individual blogs and blog clusters showing especially high or unusual activity as compared to the overall baseline. This research forms the first stage in a larger project to investigate the shape and internal dynamics of the Australian political blogosphere. In this first stage, we tracked the activities of some 230 political blogs and related Websites in Australia from 2 November 2007 (the final month of the federal election campaign, with the election itself taking place on 24 Novem‐ber) to 24 January 2008. We harvested more than 65,000 articles for this study.

Best Practice Guide : Generic Overview

The construction industry is a key national economic component. It tends to be at the forefront of cyclic changes in the Australian economy. It has a significant impact, both directly and indirectly, on the efficiency and productivity of other industries. Moreover it affects everyone to a greater or lesser extent; through its products whether they are manifested in the physical infrastructure that supports the operation of the economy or through the built environment that directly impacts on the quality of life experienced by individuals. In financial terms the industry makes one of the largest contributions to the Australian economy, accounting for 4.7 per cent of GDP 1 which was worth over $30B in 20012. The construction industry is comprised of a myriad of small firms, across several important sectors including, o Residential building, o Commercial building, o Building services, o Engineering, o Infrastructure o Facilities Management o Property Development Each sector is typified by firms that have distinctive characteristics such as the number of employees, size and value of contracts, number of jobs, and so forth. It tends to be the case that firms operating in commercial building are larger than those involved in residential construction. The largest contractors are found in engineering and infrastructure, as well as in the commercial building sub-sectors. However all sectors are characterised by their reliance upon sub-contractors to carry out on-site operations. Professionals from the various design consultant groups operate across all of these sectors. This description masks one of the most significant underlying causes of inefficiency in the construction industry, namely its fragmentation. The Construction Industry chapter of the 2004 Australian Year Book3, published by the Australian Bureau of Statistics unmasks the industry’s fragmented structure, typified by the large number of operating businesses within it, the vast majority of which are small companies employing less than 5 people. It identifies over 190,000 firms, of which over 90 percent employ less than 5 people. At the other end of the spectrum, firms employing 20 or more people account for fractionally more than one percent of businesses in the industry.

Examining the antecedents and consequences of ritualized fan behavior [Abstract]

One of the features of the sporting industry is the ritualized way in which it is consumed across the world. Fans of every sport have rituals and superstitions to help them enjoy the spectacle, socialize with other like-minded fans, and reduce some of the anxiety of watching their team play. These rituals include dress, barracking styles and pre and post match behaviors. What is not known are the factors that lead fans to engage in ritual behaviors and what relationship rituals have with desirable outcomes such as increased attendance, attitudinal loyalty or satisfaction. Given that some ritual behaviors are clearly undesirable, (e.g., hooliganism), understanding these relationships is important to managers who may be questioning whether rituals should be encouraged. Although ritualized behavior amongst fans is clearly visible, the symbolic and emotional nature of ritual poses challenges to researchers. Most previous ritual research is exploratory and qualitative in nature. This study, however, uses a behavior-based scale to measure fan ritual and relates it to desirable outcomes such as commitment and attendance. Over 2,000 season ticket holders of a football (soccer) team in Australia’s professional A-League competition were surveyed to investigate the antecedents and consequences of fan ritual behavior. Cluster analysis was used to explore the characteristics of respondents, and it revealed that those fans that engage in ritual behavior also differed on many other demographic and attitudinal dimensions. The associations between ritual and psychological commitment, and ritual and attendance are positive and significant. When used in conjunction with other constructs, fan ritual also improves the explanation of attendance behavior. The findings support previous research that found a significant and positive relationship between team identification, involvement and attendance, and extend previous research by finding a significant and positive relationship between rituals and attendance. For sports marketing practitioners, the results indicate the importance of developing and managing consumption rituals tied to game day attendance, with a view to generating uncommon loyalty.