The Springfield weed and seed initiative : a process description and evaluation /

At head of title on cover: Research and program evaluation in Illinois: studies on drug abuse and violent crime.

The general plan in the urban planning process : essay and bibliography.

Caption title.

Kinetic model for selective cultivation of microfungi in a microscreen process for food processing wastewater treatment and biomass production

The research was aimed at developing a technology to combine the production of useful microfungi with the treatment of wastewater from food processing. A recycle bioreactor equipped with a micro-screen was developed as a wastewater treatment system on a laboratory scale to contain a Rhizopus culture and maintain its dominance under non-aseptic conditions. Competitive growth of bacteria was observed, but this was minimised by manipulation of the solids retention time and the hydraulic retention time. Removal of about 90% of the waste organic material (as BOD) from the wastewater was achieved simultaneously. Since essentially all fungi are retained behind the 100 mum aperture screen, the solids retention time could be controlled by the rate of harvesting. The hydraulic retention time was employed to control the bacterial growth as the bacteria were washed through the screen at a short HRT. A steady state model was developed to determine these two parameters. This model predicts the effluent quality. Experimental work is still needed to determine the growth characteristics of the selected fungal species under optimum conditions (pH and temperature).

Referral to rehabilitation following traumatic brain injury: practitioners and the process of decision-making

The study aimed to examine the factors influencing referral to rehabilitation following traumatic brain injury (TBI) by using social problems theory as a conceptual model to focus on practitioners and the process of decision-making in two Australian hospitals. The research design involved semi-structured interviews with 18 practitioners and observations of 10 team meetings, and was part of a larger study on factors influencing referral to rehabilitation in the same settings. Analysis revealed that referral decisions were influenced primarily by practitioners' selection and their interpretation of clinical and non-clinical patient factors. Further, practitioners generally considered patient factors concurrently during an ongoing process of decision-making, with the combinations and interactions of these factors forming the basis for interpretations of problems and referral justifications. Key patient factors considered in referral decisions included functional and tracheostomy status, time since injury, age, family, place of residence and Indigenous status. However, rate and extent of progress, recovery potential, safety and burden of care, potential for independence and capacity to cope were five interpretative themes, which emerged as the justifications for referral decisions. The subsequent negotiation of referral based on patient factors was in turn shaped by the involvement of practitioners. While multi-disciplinary processes of decision-making were the norm, allied health professionals occupied a central role in referral to rehabilitation, and involvement of medical, nursing and allied health practitioners varied. Finally, the organizational pressures and resource constraints, combined with practitioners' assimilation of the broader efficiency agenda were central factors shaping referral. (C) 2004 Elsevier Ltd. All rights reserved.

The use of e-mail in the therapy process

The therapeutic letter has a long history, with roots in psychoanalytic work and continuing application in family therapy. The advent of e-mail has allowed another form for therapeutic written communication which, while incorporating the benefits of therapeutic letters, adds to these. It has also opened up some potential risks. This article incorporates a brief review of the literature covering therapeutic written communication and offers a case example where e-mail was used as an adjunct in face-to-face therapy with a client who experienced attachment difficulties. This therapy was informed by systemic and psychoanalytic traditions. The authors explore a variety of technical matters including the timing and Crafting of e-mail responses, the integration of written communication with face-to-face therapy, impact on the therapeutic relationship and management of crisis. Ethical issues such as confidentiality and duty of care are also considered.

A community nurse referral system for HMRs: Can it work?

The HMR model contains a mechanism whereby anyone who is concerned about the risk of medication misadventure can request a HMR from the patient's GP. Since nurses are widely involved in a range of triage and gatekeeping roles, utilising their primary care skills to identify patients for a HMR is a logical extension of this role. Furthermore, community nurses visit their clients in the home situation and see many difficulties the client may be experiencing at first hand. They are therefore well placed to request specialist assistance for the client. Blue Care in Brisbane, a community nursing service, approached its local Division of General practice to determine how best to request HMRs for its clients. The Division contacted The University of Queensland which initiated this study to engage the health care team to tailor the established HMR request process to the needs of community nurses and test the system developed. (non-author abstract)

Making it work: Identifying the challenges of collaborative international research

In this article, we explore the challenges - and benefits - of conducting collaborative research on an international scale. The authors - from Australia, Canada, and New Zealand - draw upon their experiences in designing and conducting a three-country study. The growing pressures on scholars to work in collaborative research teams are described, and key findings and reflections are presented. It is claimed that such work is a highly complex and demanding extension to the academic's role. The authors conclude that, despite the somewhat negative sense that this reflection may convey, the synergies gained and the valuable comparative learning that took place make overcoming these challenges a worthwhile process. The experiences as outlined in this paper suggest that developing understandings of the challenges inherent in undertaking international collaborative research might well be a required component of the professional development opportunities afforded to new scholars.

Supporting the software testing process through specification animation

Achieving consistency between a specification and its implementation is an important part of software development. In this paper, we present a method for generating passive test oracles that act as self-checking implementations. The implementation is verified using an animation tool to check that the behavior of the implementation matches the behavior of the specification. We discuss how to integrate this method into a framework developed for systematically animating specifications, which means a tester can significantly reduce testing time and effort by reusing work products from the animation. One such work product is a testgraph: a directed graph that partially models the states and transitions of the specification. Testgraphs are used to generate sequences for animation, and during testing, to execute these same sequences on the implementation.

Derivations of variational gaussian process approximation framework

Recently, within the VISDEM project (EPSRC funded EP/C005848/1), a novel variational approximation framework has been developed for inference in partially observed, continuous space-time, diffusion processes. In this technical report all the derivations of the variational framework, from the initial work, are provided in detail to help the reader better understand the framework and its assumptions.

Computer control of chemical process plants with special reference to distillation

A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.

The Japanisation process in Malaysia

This thesis examines the empirical evidence for the transferability of Japanese soft technology (JST) or Japanese work organisation within two government-initiated, Malaysian-Japanese strategic alliances: PROTON and PERNEC. The government, through its Look East Policy (LEP) began in 1982, taking Japan (and South Korea) as models and partners in Malaysian economic and industrial development process, and expected these alliances to learn the good aspects of Japanese work organisations and management styles in order for them to become independent companies, both technologically and economically. The thesis found that the alliances have been successfully taking and utilising Japanese parts, components, tools, robots and machines; i.e. the 'ready-made hard technology'. [Whereas the important element of soft technology has been ignored]. The soft technology has been slowly and marginally transferred because neither local parties nor their Japanese counterparts within the alliances consider the acquisition or transfer of soft technology to be the main concern or a part of business plan. Although many factors influence management transfer, the thesis has focused on the eagerness and the capability of Malaysian managerial teams to acquire and, to a lesser extent, the readiness of the Japanese to transfer the technology. It was found that there is a lack of demand on technology acquisition by Malaysian managers and lack of responsibility to transfer the technology among Japanese experts. However, the political and social pressures on these alliances, the industrial climate and labour market, leaderships and management system of alliances, and Japanese MNCs regional and global corporate strategies have contributed to the high level of transfer of JST at PROTON compared to PERNEC. The research also found that Malaysian industrial and investment policies have favoured foreign investment but there is a lack of strategies for nurturing indigenous technological development.On the other hand the Japanese MNCs and public agencies have been operating in Malaysia and guided by their regional and global corporate strategies and less concerned with Malaysian technological development. In conclusion, empirically, the JST transfer is minimal. The transfer has been influenced by internal contingency factors of organisation; external industrial, political and cultural environmental factors; and last but not least the Japanese MNCs' global and regional corporate strategies. The transfer of Japanese management in this research is inclined towards core-periphery transfer model, it is also related to organisational and national technological capability.

Achieving internal process benchmarking:guidance from BASF

Purpose - The purpose of the work discussed in this paper is to understand, analyse and benchmark the "Packing and Filling" processes within BASF. A benchmarking project is described in detail which aimed to cover sites in different countries that supplied many different variants of finished goods in order to establish best practice and then to generate some options for their implementation. Design/methodology/approach - The project used an adaptation of accepted benchmarking methodology combined with other techniques (such as rich picture generation, and cluster analysis) to maximise the insight generated. Findings - The findings of the research showed that one of the main factors effecting the process was how third parties were used (e.g. extent and nature of out-sourcing, and its degree of centralisation). Research limitations/ implications - The exercise was challenged by the selection of suitably similar benchmarking candidates because the environment was complex and highly varied; the paper explains practical solutions for dealing with this challenge. Practical limitations - Strategic and tactical options are outlined at the end of the paper and will have applicability to other organisations and industries that are looking to find the answers to frequently asked questions about how to successfully implement an internal process benchmarking project in a large complex organisation that has high variety in end products and delivery methods. Originality/value - The methodology described in this paper is of a proprietary and unique nature. The paper is structured around some key questions commonly asked of benchmarking, and the answers are provided via a real in-depth case study from BASF that spans 4 sites in 3 countries using 15 different filling lines. © Emerald Group Publishing Limited.

Project risk management:a combined analytic hierarchy process and decision tree approach

Time, cost and quality achievements on large-scale construction projects are uncertain because of technological constraints, involvement of many stakeholders, long durations, large capital requirements and improper scope definitions. Projects that are exposed to such an uncertain environment can effectively be managed with the application of risk management throughout the project life cycle. Risk is by nature subjective. However, managing risk subjectively poses the danger of non-achievement of project goals. Moreover, risk analysis of the overall project also poses the danger of developing inappropriate responses. This article demonstrates a quantitative approach to construction risk management through an analytic hierarchy process (AHP) and decision tree analysis. The entire project is classified to form a few work packages. With the involvement of project stakeholders, risky work packages are identified. As all the risk factors are identified, their effects are quantified by determining probability (using AHP) and severity (guess estimate). Various alternative responses are generated, listing the cost implications of mitigating the quantified risks. The expected monetary values are derived for each alternative in a decision tree framework and subsequent probability analysis helps to make the right decision in managing risks. In this article, the entire methodology is explained by using a case application of a cross-country petroleum pipeline project in India. The case study demonstrates the project management effectiveness of using AHP and DTA.

Integrated analytic hierarchy process and its applications:a literature review

Due to its wide applicability and ease of use, the analytic hierarchy process (AHP) has been studied extensively for the last 20 years. Recently, it is observed that the focus has been confined to the applications of the integrated AHPs rather than the stand-alone AHP. The five tools that commonly combined with the AHP include mathematical programming, quality function deployment (QFD), meta-heuristics, SWOT analysis, and data envelopment analysis (DEA). This paper reviews the literature of the applications of the integrated AHPs. Related articles appearing in the international journals from 1997 to 2006 are gathered and analyzed so that the following three questions can be answered: (i) which type of the integrated AHPs was paid most attention to? (ii) which area the integrated AHPs were prevalently applied to? (iii) is there any inadequacy of the approaches? Based on the inadequacy, if any, some improvements and possible future work are recommended. This research not only provides evidence that the integrated AHPs are better than the stand-alone AHP, but also aids the researchers and decision makers in applying the integrated AHPs effectively.

Do many hands make light work? How to overcome social loafing and gain motivation in work teams

Purpose – The purpose of this paper is to challenge the assumption that process losses of individuals working in teams are unavoidable. The paper aims to challenge this assumption on the basis of social identity theory and recent research. Design/methodology/approach – The approach adopted in this paper is to review the mainstream literature providing strong evidence for motivation problems of individuals working in groups. Based on more recent literature, innovative ways to overcome these problems are discussed. Findings – A social identity-based analysis and recent findings summarized in this paper show that social loafing can be overcome and that even motivation gains in group work can be expected when groups are important for the individual group members' self-concepts. Practical implications – The paper provides human resource professionals and front-line managers with suggestions as to how individual motivation and performance might be increased when working in teams. Originality/value – The paper contributes to the literature by challenging the existing approach to reducing social loafing, i.e. individualizing workers as much as possible, and proposes a team-based approach instead to overcome motivation problems.