Salient factors in child molestation: Moral development, social competence, and type of offender

The current study was designed to build on and extend the existing knowledge base of factors that cause, maintain, and influence child molestation. Theorized links among the type of offender and the offender's levels of moral development and social competence in the perpetration of child molestation were investigated. The conceptual framework for the study is based on the cognitive developmental stages of moral development as proposed by Kohlberg, the unified theory, or Four-Preconditions Model, of child molestation as proposed by Finkelhor, and the Information-Processing Model of Social Skills as proposed by McFall. The study sample consisted of 127 adult male child molesters participating in outpatient group therapy. All subjects completed a Self-Report Questionnaire which included questions designed to obtain relevant demographic data, questions similar to those used by the researchers for the Massachusetts Treatment Center: Child Molester Typology 3's social competency dimension, the Defining Issues Test (DIT) short form, the Social Avoidance and Distress Scale (SADS), the Rathus Assertiveness Schedule (RAS), and the Questionnaire Measure of Empathic Tendency (Empathy Scale). Data were analyzed utilizing confirmatory factor analysis, t-tests, and chi-square statistics. Partial support was found for the hypothesis that moral development is a separate but correlated construct from social competence. As predicted, although the actual mean score differences were small, a statistically significant difference was found in the current study between the mean DITP scores of the subject sample and that of the general male population, suggesting that child molesters, as a group, function at a lower level of moral development than does the general male population, and the situational offenders in the study sample demonstrated a statistically significantly higher level of moral development than the preferential offenders. The data did not support the hypothesis that situational offenders will demonstrate lower levels of social competence than preferential offenders. Relatively little significance is placed on this finding, however, because the measure for the social competency variable was likely subject to considerable measurement error in that the items used as indicators were not clearly defined. The last hypothesis, which involved the potential differences in social anxiety, assertion skills, and empathy between the situational and preferential offender types, was not supported by the data. ^

Electrocardiogram breathing: A study of electrocardiogram derived respiration plus multiresolution wavelet analysis of heartbeat interval variability in sleep study patients

This dissertation presents a unique research opportunity by using recordings which provide electrocardiogram (ECG) plus a reference breathing signal (RBS). ECG derived breathing (EDR) is measured and correlated against RBS. Standard deviations of multiresolution wavelet analysis coefficients (SDMW) are obtained from heart rate and classified using RBS. Prior works by others used select patients for sleep apnea scoring with EDR but no RBS. Another prior work classified select heart disease patients with SDMW but no RBS. This study used randomly chosen sleep disorder patient recordings; central and obstructive apneas, with and without heart disease.^ Implementation required creating an application because existing systems were limited in power and scope. A review survey was created to choose a development environment. The survey is presented as a learning tool and teaching resource. Development objectives were rapid development using limited resources (manpower and money). Open Source resources were used exclusively for implementation. ^ Results show: (1) Three groups of patients exist in the study. Grouping RBS correlations shows a response with either ECG interval or amplitude variation. A third group exists where neither ECG intervals nor amplitude variation correlate with breathing. (2) Previous work done by other groups analyzed SDMW. Similar results were found in this study but some subjects had higher SDMW, attributed to a large number of apneas, arousals and/or disconnects. SDMW does not need RBS to show apneic conditions exist within ECG recordings. (3) Results in this study support the assertion that autonomic nervous system variation was measured with SDMW. Measurements using RBS are not corrupted due to breathing even though respiration overlaps the same frequency band.^ Overall, this work becomes an Open Source resource which can be reused, modified and/or expanded. It might fast track additional research. In the future the system could also be used for public domain data. Prerecorded data exist in similar formats in public databases which could provide additional research opportunities. ^

Una sociedad legalista: Abogados, procuradores de causas y la creación de una cultura legal colonial en Lima y Potosí, 1540–1670

This study deals with the formation, reproduction, and the role in litigation of two branches of the legal profession, lawyers and procurators. They were the experts in charge of civil, criminal, and ecclesiastical litigation during the Old Regime. While the lawyers provided erudite legal advice, procurators oriented and drove the procedure as legal representatives of their clients. The European legal revolutions of the twelfth and thirteenth centuries forged a new legal culture in which the lawsuit was reputed to be the best way to settle disputes. Likewise, that legal culture conferred an important place to specialists as legal facilitators of the contending parties. When Castilians exported their legal system to the New World, they spread a complex and bureaucratic framework, contributing to the reproduction of a class of experts in urban spaces. Lima and Potosi, two urban centers created in the sixteenth century, quickly became significant ‘legal cities’. This dissertation explores how the legal markets of these cities operated, the careers of their specialists, their professional options, social images regarding them, and litigation costs. This study examines the careers of 267 facilitators and demonstrates that they constituted a class of distinctive legal professionals. Legal culture embodies the representation and use of law. The closeness of specialists with litigants, in particular of procurators familiarized the parties with litigation and its complex processes. These specialists forged dominant legal discourses and manipulated juridical order. Litigants were not passive agents of their specialists. Caciques and members of the Hispanicized communities appropriated the law in a visible way as the growing litigiousness illustrates. Colonial law (of a pluralistic basis) was an arena of assertion and discussion of rights by different social actors, encomenderos, leading citizens, widows, native chieftains, artisans, and commoners. This study concludes that this struggle and manipulation served to legitimate the role of those legal experts and gave birth to a complex legalistic society in the Andes under Spanish Habsburg rule.

Thermal imaging as a biometrics approach to facial signature authentication

This dissertation develops an image processing framework with unique feature extraction and similarity measurements for human face recognition in the thermal mid-wave infrared portion of the electromagnetic spectrum. The goals of this research is to design specialized algorithms that would extract facial vasculature information, create a thermal facial signature and identify the individual. The objective is to use such findings in support of a biometrics system for human identification with a high degree of accuracy and a high degree of reliability. This last assertion is due to the minimal to no risk for potential alteration of the intrinsic physiological characteristics seen through thermal infrared imaging. The proposed thermal facial signature recognition is fully integrated and consolidates the main and critical steps of feature extraction, registration, matching through similarity measures, and validation through testing our algorithm on a database, referred to as C-X1, provided by the Computer Vision Research Laboratory at the University of Notre Dame. Feature extraction was accomplished by first registering the infrared images to a reference image using the functional MRI of the Brain’s (FMRIB’s) Linear Image Registration Tool (FLIRT) modified to suit thermal infrared images. This was followed by segmentation of the facial region using an advanced localized contouring algorithm applied on anisotropically diffused thermal images. Thermal feature extraction from facial images was attained by performing morphological operations such as opening and top-hat segmentation to yield thermal signatures for each subject. Four thermal images taken over a period of six months were used to generate thermal signatures and a thermal template for each subject, the thermal template contains only the most prevalent and consistent features. Finally a similarity measure technique was used to match signatures to templates and the Principal Component Analysis (PCA) was used to validate the results of the matching process. Thirteen subjects were used for testing the developed technique on an in-house thermal imaging system. The matching using an Euclidean-based similarity measure showed 88% accuracy in the case of skeletonized signatures and templates, we obtained 90% accuracy for anisotropically diffused signatures and templates. We also employed the Manhattan-based similarity measure and obtained an accuracy of 90.39% for skeletonized and diffused templates and signatures. It was found that an average 18.9% improvement in the similarity measure was obtained when using diffused templates. The Euclidean- and Manhattan-based similarity measure was also applied to skeletonized signatures and templates of 25 subjects in the C-X1 database. The highly accurate results obtained in the matching process along with the generalized design process clearly demonstrate the ability of the thermal infrared system to be used on other thermal imaging based systems and related databases. A novel user-initialization registration of thermal facial images has been successfully implemented. Furthermore, the novel approach at developing a thermal signature template using four images taken at various times ensured that unforeseen changes in the vasculature did not affect the biometric matching process as it relied on consistent thermal features.

Marketing A Hospitality Program And Its Product

In his dialogue entitled - Marketing A Hospitality Program and Its Product - Jürgen Chopard, Dr. es Sciences (Economics) Director, Centre International de Glion, Glion, Switzerland, Dr. Chopard initially offers: “The recruitment of qualified personnel is extremely difficult in an industry with a poor image; where career paths are not well defined. The author discusses the employment of marketing management techniques to improve the positioning of hospitality education and create a more attractive perception of the hotel industry.” As outlined in the above paragraph, Dr. Chopard vectors-in on marketing strategies from two standpoints; the educational side with its focus on curriculum, and the larger, industry side with its emphasis on public perception and service. These are not necessarily, nor should they be viewed as disparate elements. “ Although some professionals may see schools of hospitality education catering to two markets, students on one hand and industry on the other, in fact, their needs should be viewed as the same and hence a single market,” Dr. Chopard says to bolster his assertion. “The marketing concept is a management orientation that holds that the key task of the organization is to determine the needs and wants of target markets and to adapt the organization to delivering the desired satisfactions more effectively and efficiently than its competitor,” the author confides, with an attribution. From these information/definition leanings, Dr. Chopard continues on a path that promotes the Centre International de Glion, Glion, Switzerland, which he is affiliated with. Why, because they endorse the same principles he is explaining to you. That’s not a bad thing. Essentially, what Dr. Chopard wants you to know is, education and business management are synonymous and therefore should share the same marketing designs and goals. “It is hard to believe that as critically important a sector as education does not use for its own management the techniques which it teaches and which have largely been proved in other fields,” the author provides as counterpoint. Since pedagogical needs so closely relate to the more pragmatic needs of the industry in general, these elements should seek to compliment and engage each other, in fact, collaboration is imperative, Dr. Chopard expresses a priori. “The cooperation of future employers is indispensable in the preparation of the product, so that it is capable of providing the expected services. The need for close relations between training establishments and the hotel and catering industry seems obvious,” Dr. Chopard says. The author reveals some flaws in hospitality marketing strategy, and then contrasts these against how a successful strategy could/should be implemented.

Appraising Work Group Performance: New Productivity Opportunities in Hospitality Management

In - Appraising Work Group Performance: New Productivity Opportunities in Hospitality Management – a discussion by Mark R. Edwards, Associate Professor, College of Engineering, Arizona State University and Leslie Edwards Cummings, Assistant Professor, College of Hotel Administration University of Nevada, Las Vegas; the authors initially provide: “Employee group performance variation accounts for a significant portion of the degree of productivity in the hotel, motel, and food service sectors of the hospitality industry. The authors discuss TEAMSG, a microcomputer based approach to appraising and interpreting group performance. TEAMSG appraisal allows an organization to profile and to evaluate groups, facilitating the targeting of training and development decisions and interventions, as well as the more equitable distribution of organizational rewards.” “The caliber of employee group performance is a major determinant in an organization's productivity and success within the hotel and food service industries,” Edwards and Cummings say. “Gaining accurate information about the quality of performance of such groups as organizational divisions, individual functional departments, or work groups can be as enlightening...” the authors further reveal. This perspective is especially important not only for strategic human resources planning purposes, but also for diagnosing development needs and for differentially distributing organizational rewards.” The authors will have you know, employee requirements in an unpredictable environment, which is what the hospitality industry largely is, are difficult to quantify. In an effort to measure elements of performance Edwards and Cummings look to TEAMSG, which is an acronym for Team Evaluation and Management System for Groups. They develop the concept. In discussing background for employees, Edwards and Cummings point-out that employees - at the individual level - must often possess and exercise varied skills. In group circumstances employees often work at locations outside of, or move from corporate unit-to-unit, as in the case of a project team. Being able to transcend individual-to-group mentality is imperative. “A solution which addresses the frustration and lack of motivation on the part of the employee is to coach, develop, appraise, and reward employees on the basis of group achievement,” say the authors. “An appraisal, effectively developed and interpreted, has at least three functions,” Edwards and Cummings suggest, and go on to define them. The authors do place a great emphasis on rewards and interventions to bolster the assertion set forth in their thesis statement. Edwards and Cummings warn that individual agendas can threaten, erode, and undermine group performance; there is no - I - in TEAM.

Network construction and graph theoretical analysis of functional language networks in pediatric epilepsy

This dissertation introduces a new approach for assessing the effects of pediatric epilepsy on the language connectome. Two novel data-driven network construction approaches are presented. These methods rely on connecting different brain regions using either extent or intensity of language related activations as identified by independent component analysis of fMRI data. An auditory description decision task (ADDT) paradigm was used to activate the language network for 29 patients and 30 controls recruited from three major pediatric hospitals. Empirical evaluations illustrated that pediatric epilepsy can cause, or is associated with, a network efficiency reduction. Patients showed a propensity to inefficiently employ the whole brain network to perform the ADDT language task; on the contrary, controls seemed to efficiently use smaller segregated network components to achieve the same task. To explain the causes of the decreased efficiency, graph theoretical analysis was carried out. The analysis revealed no substantial global network feature differences between the patient and control groups. It also showed that for both subject groups the language network exhibited small-world characteristics; however, the patient's extent of activation network showed a tendency towards more random networks. It was also shown that the intensity of activation network displayed ipsilateral hub reorganization on the local level. The left hemispheric hubs displayed greater centrality values for patients, whereas the right hemispheric hubs displayed greater centrality values for controls. This hub hemispheric disparity was not correlated with a right atypical language laterality found in six patients. Finally it was shown that a multi-level unsupervised clustering scheme based on self-organizing maps, a type of artificial neural network, and k-means was able to fairly and blindly separate the subjects into their respective patient or control groups. The clustering was initiated using the local nodal centrality measurements only. Compared to the extent of activation network, the intensity of activation network clustering demonstrated better precision. This outcome supports the assertion that the local centrality differences presented by the intensity of activation network can be associated with focal epilepsy.^

Evidence of Recent Phosphorus Enrichment in Surface Soils of Taylor Slough and Northeast Everglades National Park

Everglades National Park (ENP) is the last hydrologic unit in the series of impounded marsh units that make up the present-day Everglades. The ENP receives water from upstream Water Conservation Areas via canals and water control structures that are highly regulated for flood control, water supply, wildlife management, concerns about poor water quality and the potential for downstream ecosystem degradation. Recent surveys of surface soils in ENP, designed for random sampling for spatial analysis of soil nutrients, did not sample proximate to inflow structures and thus did not detect increased soil phosphorus associated with these water conveyances. This study specifically addressed these areas in a focused sampling effort at three key inflow points in northeast ENP which revealed elevated soil TP proximate to inflows. Two transects extending down Shark River Slough and one down Taylor Slough (a natural watershed of particular ecological value) were found to have soil TP levels in excess of 500 mg kg−1—a threshold above which P enrichment is indicated. These findings suggest the negative impact of elevated water (P) from surface flows and support the assertion that significant soil TP enrichment is occurring in Taylor Slough and other areas of northeastern ENP.

Avaliação das técnicas de soldagem MIG-P CA e MIG-P CC+ aplicadas ao passe de enchimento em liga de alumínio AA5083

For contain beneficial properties, aluminum alloys are gaining more importance in different industrial areas, becoming the subject of study in several academic fields. When related to welding these alloys have some peculiarities that may hinder the union, such as microscopic oxide layer present on the metal surface. The MIG welding process, also known as GMAW, has developed versions that can be effective for welding aluminum. Knowing this, for this paper, two versions of pulsed MIG (CC + and CA) were chosen to evaluate which best suits pass by filling bevel on AA5083 aluminum sheets with 8 and 12 mm thick respectively. Furthermore, two types of wire, ER5087 and ER5183 were evaluated. To evaluate the process and versions of the wires, the high-speed cameras and thermal were used to monitor the metal transfer and the thermal behavior respectively, and the metallographic analysis for macrographic view of the weld beads and non-destructive testing by radiography for observation of possible discontinuities. It was found that the technique of MIG-P CA showed better results ahead of another technique both welding conditions imposed. When connected to the wires, they showed similar results, with uniform cords and seamless

Densificação e microestrutura de um compósito Mo-Cu preparado a partir de um pó de heptamolibidato de amônia e cobre

The Cu-Mo system is a composite used in the electrical industry as material for electrical contact and resistance welding electrode as well as the heat sink and microwave absorber in microelectronic devices. The use of this material in such applications is due to the excellent properties of thermal and electrical conductivity and the possibility of adjustment of its coefficient of thermal expansion to meet those of materials used as substrates in the semiconductor micoreletrônic industry. Powder metallurgy through the processes of milling, pressing shaping and sintering is a viable technique for consolidation of such material. However, the mutual insolubility of both phases and the low wettability of liquid Cu on Mo impede its densification. However, the mutual insolubility of both phases and the low wettability of liquid Cu on Mo impede its densification. The mechanical alloying is a technique for preparation of powders used to produce nanocrystalline composite powder with amorphous phase or extended solid solution, which increases the sinterability immiscible systems such as the Mo-Cu. This paper investigates the influence of ammonium heptamolybdate (HMA) and the mechanical alloying in the preparation of a composite powder HMA-20% Cu and the effect of this preparation on densification and structure of MoCu composite produced. HMA and Cu powders in the proportion of 20% by weight of Cu were prepared by the techniques of mechanical mixing and mechanical alloying in a planetary mill. These were milled for 50 hours. To observe the evolution of the characteristics of the particles, powder samples were taken after 2, 10, 15, 20, 30 and 40 hours of milling. Cylindrical samples 5 to 8 mm in diameter and 3 to 4 mm thickness were obtained by pressing at 200 MPa to the mixed powders so as to ground. These samples were sintered at 1200 ° C for 60 minutes under an atmosphere of H2. To determine the effect of heating rate on the structure of the material during the decomposition and reduction of HMA, rates of 2, 5 and 10 ° C / min were used .. The post and the structures of the sintered samples were characterized by SEM and EDS. The density of the green and sintered bodies was measured using the geometric method (weight / volume). Vickers microhardness with a load of 1 N for 15 s were performed on sintered structures. The density of the sintered structures 10 ° C / min. reached 99% of theoretical density, how the density of sintered structures to 2 ° C / min. reached only 90% of the theoretical density

Análise não-linear do campo de temperaturas desenvolvidas durante a soldagem do tipo TIG contínuo em placas delgadas

This study offers an analytical approach in order to provide a determination of the temperature field developed during the DC TIG welding of a thin plate of aluminum. The non-linear characteristics of the phenomenon, such as the dependence of the thermophysical and mechanical properties with temperature were considered in this study. In addition to the conductive heat exchange process, were taken into account the exchange by natural convection and radiation. A transient analysis is performed in order to obtain the temperature field as a function of time. It is also discussed a three-dimensional modeling of the heat source. The results obtained from the analytical model were be compared with the experimental ones and those available in the literature. The analytical results show a good correlation with the experimental ones available in the literature, thus proving the feasibility and efficiency of the analytical method for the simulation of the heat cycle for this welding process.

A (não) assunção da responsabilidade enunciativa em livros didáticos de língua portuguesa dos 4º e 5º anos

Portuguese textbook has been the focus of many investigations, nevertheless, the theme still has much to be discussed, reflected and broadened. This conviction mobilized us to perform this research, seeking to answer three questions: (1) how does the author of the textbook induce the student to give his opinion in comprehension questions of text in Portuguese textbook of 4th and 5thgrade? Which enunciative links are used by the author of the textbook in comprehension questions of text concerning to the assumption of enunciative responsability? And (3) Which enunciative links are used by the author of the textbook in comprehension questions of text concerning to the non assumption of enunciative responsability? In this direction, we define as objective to id entify, describe, analyze and interpret how the (non) assumption of enunciative responsibility materializes itself in Portuguese textbooks. The theme is echoed in the guidelines of the Parâmetros Curriculares Nacionais PCN (1998; 2001), who assume that all education committed to citizenship need to create conditions in order the student can develop his discursive competence" (BRAZIL, 1998, p. 23). This assertion of PCN (1998; 2001) is closely related to our research object, and therefore, it has corroborated to the accomplishment of this study. So, we analyze the comprehension questions of the texts that are elaborated by the authors of Portuguese textbooks of the 4th and 5th grade, used at public schools in the city of Natal-RN in 2010. As a theoretical basis, we have considered the postulates of Textual Analysis of Discourses ATD and Enunciative Linguistics. Our research was mainly based on the studies of Adam (2011), Nølke (1994; 2001; 2006; 2009; 2013), Nølke, Fløttum e Norén (2004) Rabatel (2004; 2005; 2008; 2009), Guentchéva (1994; 1996). Our data analysis revealed that the authors of Portuguese textbooks explore the reading comprehension, inducing students to answer questions that may be categorized like: (1) induction to the assumption of enunciative responsibility, (2) induction for non assumption the enunciative responsibility, (3) orientation for the study of vocabulary and grammar and (4) orientation of extra themes. The results from the comparison of the books of 4th and 5th grade of the two analyzed collections, we observed through the links of (non) responsability Nølke (1994; 2001; 2006; 2009; 2013), Nølke, Fløttum e Norén (2004), which in 79% of the questions, the authors induce the decoding of a content objectively inscribed in the text. In this sense, the notion of understanding a text is compromised, since it is limited to copying contents or transcription exercises, failing to consider the interactive use of language, or rather, failing to expand the student's knowledge in the (re)construction of the text of the meanings. This shows that there is a lack in the deal with the text that includes the textual discursive resources in the reading activities in Portuguese textbooks. We recall, in this direction, the works of Marcuschi (2005), Antunes (2003, 2005), and Bunzen Rojo (2008), among others authors who contributed greatly to orient the choice of Portuguese textbooks. Finally, we believe that the study about the enunciative responsibility phenomenon in Portuguese texto oks offers, above all, instruments in order to the interlocutors identify the elements present in the enunciation and the effects that these elements bring to the (re) construction of the meanings in texts that they read and write in the classroom.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Anúncio publicitário direcionado ao público masculino: uma abordagem dialógica

In this study, we intend to focus on the printed advertisement genre which reveals its discursive genre condition circulating in printed media sphere, specifically in four magazines: Playboy, Score, GQ and Men's Health. The overall objective of this study is to analyze the identity in advertisement gender directed at male audience in printing, by considering how commercials work in the consumer society by seeking to satisfy a particular group, the reader/male consumer with modern customs and behaviors. For this, advertisements from four magazines of January, April, July and October were gathered, totaling sixteen magazines and twenty-seven types of genre pieces over a period of one year: from January to December 2012. We have selected about 27 pieces that advertisers tried to expose the body on the space of advertisements, resulting in a heightened appreciation of physical appearance. So we divide our corpus in a category, adiáforo body, and three sub-categories: the body building; the tattooed body and the consumption body. This work is part of a qualitative-interpretative approach, in order to investigate the social reality, paradigm advocated by applied linguists. Thus, our study is turned to a related activity with language issues present in the printed media sphere. Advertisement is understood as real unity of discursive and inter-subjective communication, maintaining relationships with others statements already said and prefigured and calling others to settle. Based on these assumptions, we have presented an analysis of the printed advertisement gender in men's magazines basing ourselves in contemporary research on Discourse Dialogic Analysis in Circle studies by Mikhail Bakhtin, revisiting his theoretical and methodological aspects and the identity concepts and culture as well as authors of the advertising sphere. This research has been presented relevant as it has contributed to an analysis of the verbal-visual dimension of advertising directed at male audience, considered as a discursive genre that circulates in the printed media and advertising, steeped in dialogical relations and have also contributed to the construction and development of theoretical and methodological frameworks, and applied to teachers and professionals interested in the theme. Results have shown data demonstrating that the search for a completeness never come, the man have built himself the search of the perfect body, the pursuit of exquisite stereotype, the search for products that contribute to this his self-assertion always transient and in construction. It is concluded that the body is a recurring theme in the four magazines. The body tailored is always presented as the ideal to which every man must achieve.