Gellan gum-hyaluronate spongy-like hydrogels promote angiogenesis in hindlimb ischemia

"Tissue engineering: part A", vol. 21, suppl. 1 (2015)

A novel hanging spherical drop system for the generation of cellular spheroids and high throughput combinatorial drug screening

We propose a novel hanging spherical drop system for anchoring arrays of droplets of cell suspension based on the use of biomimetic superhydrophobic flat substrates, with controlled positional adhesion and minimum contact with a solid substrate. By facing down the platform, it was possible to generate independent spheroid bodies in a high throughput manner, in order to mimic in vivo tumour models on the lab-on-chip scale. To validate this system for drug screening purposes, the toxicity of the anti-cancer drug doxorubicin in cell spheroids was tested and compared to cells in 2D culture. The advantages presented by this platform, such as feasibility of the system and the ability to control the size uniformity of the spheroid, emphasize its potential to be used as a new low cost toolbox for high-throughput drug screening and in cell or tissue engineering.

Production of elastic Chitosan/Chondroitin sulphate multilayer films for tissue regeneration

Membrane-like scaffolds are suitable to induce regeneration in many and different anatomic sites, such as periodontal membrane, skin, liver and cardiac tissues. In some circumstances, the films should adapt to geometrical changes of the attached tissues, such as in cardiac or blood vessel tissue engineering applications. In this context, we developed stretchable two-dimensional multilayer constructs through the assembling of two natural-based polyelectrolytes, chitosan (CHT) and chondroitin sulphate (CS), using the layer-by-layer methodology. The morphology, topography and the transparency of the films were evaluated. The in- fluence of genipin, a natural-derived cross-linker agent, was also investigated in the control of the mechanical properties of the CHT/CS films. The water uptake ability can be tailored by changing the cross-linker concentration, which influenced the young modulus and ultimate tensile strength. The maximum extension tends to decrease with the increase of genipin concentration, compromising the elastic properties of CHT/CS films: nevertheless using lower cross-linker contents, the ultimate tensile stress is similar to the films not cross-linked but exhibiting a significant higher modulus. The in vitro biological assays showed better L929 cell adhesion and proliferation when using the crosslinked membranes and confirmed the non-cytotoxicity of the CHT/CS films. The developed free-standing biomimetic multilayer could be designed to fulfill specific therapeutic requirements by tuning properties such as swelling, mechanical and biological performances.

Micro/nano-structured superhydrophobic surfaces in the biomedical field: part I: basic concepts and biomimetic approaches.

Inspired by natural structures, great attention has been devoted to the study and development of surfaces with extreme wettable properties. The meticulous study of natural systems revealed that the micro/nano-topography of the surface is critical to obtaining unique wettability features, including superhydrophobicity. However, the surface chemistry also has an important role in such surface characteristics. As the interaction of biomaterials with the biological milieu occurs at the surface of the materials, it is expected that synthetic substrates with extreme and controllable wettability ranging from superhydrophilic to superhydrophobic regimes could bring about the possibility of new investigations of cellâ material interactions on nonconventional surfaces and the development of alternative devices with biomedical utility. This first part of the review will describe in detail how proteins and cells interact with micro/nano-structured surfaces exhibiting extreme wettabilities.

Estudo da ligação entre componentes estruturais de GFRP (glass fiber reinforced polymer) e componentes estruturais em betão

Dissertação de mestrado integrado em Engenharia Civil

HOXA9 as a key regulator in glioma initiation, aggressiveness and response to therapy

Tese de Doutoramento em Ciências da Saúde

Production and characterization of ZrCN-Ag coatings deposited by mganetron sputtering

Tese de Doutoramento (Programa doutoral em Engenharia de Materiais)

Development of multifunctional coatings deposited on polymers based sensors for biomedical applications

Tese de Doutoramento (Programa Doutoral em Engenharia de Materiais)

Adhesive bioactive coatings inspired by sea life

Inspired by nature, in particular by the marine mussels adhesive proteins (MAPs) and by the tough brick-and-mortar nacre-like structure, novel multilayered films are prepared in the present work. Organic-inorganic multilayered films, with an architecture similar to nacre based on bioactive glass nanoparticles (BG), chitosan and hyaluronic acid modified with catechol groups, which are the main responsible for the outstanding adhesion in MAPs, are developed for the first time. The biomimetic conjugate is prepared by carbodiimide chemistry and analyzed by ultraviolet-visible spectrophotometry. The build-up of the multilayered films is monitored with a quartz crystal microbalance with dissipation monitoring and their topography is characterized by atomic force microscopy. The mechanical properties reveal that the films containing catechol groups and BG present an enhanced adhesion. Moreover, the bioactivity of the films upon immersion in a simulated body fluid solution for 7 days is evaluated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. It was found that the constructed films promote the formation of bone-like apatite in vitro. Such multifunctional mussel inspired LbL films, which combine enhanced adhesion and bioactivity, could be potentially used as coatings of a variety of implants for orthopedic applications.

Antibiofilm strategies in the food industry

Biofilms in food processing plants represent not only a problem to human health but also cause economic losses by technical failure in several systems. In fact, many foodborne outbreaks have been found to be associated with biofilms. Biofilms may be prevented by regular cleaning and disinfection, but this does not completely prevent biofilm formation. Besides, due to their diversity and to the development of specialized phenotypes, it is well known that biofilms are more resistant to cleaning and disinfection than planktonic microorganisms. In recent years, a considerable effort has been made in the prevention of microbial adhesion and biofilm formation on food processing surfaces and novel technologies have been introduced. In this context, this chapter discusses the main conventional and emergent strategies that have been employed to prevent bacterial adhesion to food processing surfaces and thus to efficiently maintain good hygiene throughout the food industries.

Effect of pH on Candida tropicalis virulence factors

Dissertação de mestrado em Bioengenharia

Antibacterial properties of multifunctional coatings Ag-ZrCN for biomedical devices: a novel approach

PhD in Sciences Specialty in Physics

The effects of sodium hypochlorite against selected drinking water-isolated bacteria in planktonic and sessile states

Chlorine is the most commonly used agent for general disinfection, particularly for microbial growth control in drinking water distribution systems. The goals of this study were to understand the effects of chlorine, as sodium hypochlorite (NaOCl), on bacterial membrane physicochemical properties (surface charge, surface tension and hydrophobicity) and on motility of two emerging pathogens isolated from drinking water, Acinetobacter calcoaceticus and Stenotrophomonas maltophilia. The effects of NaOCl on the control of single and dual-species monolayer adhered bacteria (2 h incubation) and biofilms (24 h incubation) was also assessed. NaOCl caused significant changes on the surface hydrophobicity and motility of A. calcoaceticus, but not of S. maltophilia. Planktonic and sessile S. maltophilia were significantly more resistant to NaOCl than A. calcoaceticus. Monolayer adhered co-cultures of A. calcoaceticus-S. maltophilia were more resilient than the single species. Oppositely, dual species biofilms were more susceptible to NaOCl than their single species counterparts. In general, biofilm removal and killing demonstrated to be distinct phenomena: total bacterial viability reduction was achieved even if NaOCl at the higher concentrations had a reduced removal efficacy, allowing biofilm reseed. In conclusion, understanding the antimicrobial susceptibility of microorganisms to NaOCl can contribute to the design of effective biofilm control strategies targeting key microorganisms, such as S. maltophilia, and guarantying safe and high-quality drinking water. Moreover, the results reinforce that biofilms should be regarded as chronic contaminants of drinking water distribution systems and accurate methods are needed to quantify their presence as well as strategies complementary/alternative to NaOCl are required to effectively control the microbiological quality of drinking water.

Surface phenomena and hydrodynamic effects on the deposition of Pseudomonas fluorescens

Biofilm adhesion to metals (copper, aluminium and brass) was studied at two different velocities and pH values of 7 and 9. Both bacteria and metals showed negative surface charges at those values of pH, which tends to slow down adhesion. Film densities increased with the fluid velocity and were also affected by the pH and by the growth rate of the bacteria. Long duration tests based on heat transfer measurements were run at five different fluid velocities and at pH = 7, showing in general an asymptotic behaviour and a control of deposition by adhesion and growth phenomena.

Dinámica poblacional de Streptococcus mutans en niños de edad escolar de la provincia de Córdoba. Population dynamics of Streptococcus mutans in school age children in the province of Córdoba

La caries dental es una enfermedad infecciosa, crónica y trasmisible, que se caracteriza por la desmineralización de los tejidos duros del diente, producida por la acción de los ácidos resultantes de la actividad metabólica del biofilm desarrollado sobre los dientes. Si bien, la etiología de la caries sería polimicrobiana, los estreptococos del grupo mutans son señalados como los principales protagonistas en el inicio de la lesión cariosa. En la pared celular se destacan proteínas que participan en procesos de adhesión, agregación y co-agregación, además de polisacáridos que muestran distintas especificidades antigénicas, lo que permite distinguir cuatro serotipos: c, e, f y k. Es escasa la información de las características antigénicas de las cepas circulantes de estreptococos del grupo mutans y se desconoce la relación de las mismas con la actividad de caries. En este estudio nuestros objetivos son identificar y caracterizar fenotípica y genotípicamente las cepas de estreptococos del grupo mutans circulantes en la provincia de Córdoba. La población de estudio estará constituida por escolares, urbano–marginales de la capital y del interior de la provincia. Se determinarán los serotipos de las mismas a través de de amplificaciones por PCR de tipo multiplex y luego se secuenciarán 8 genes a través de la técnica de tipado multilocus, con el fin de realizar estudios de sistemática molecular, y de estimar la estructura genética de S. mutans. Una vez que se hayan caracterizado los patrones de diversidad y distribución geográfica de S. mutans del centro de Argentina, se intentará dilucidar cómo se relacionan la diversidad genética con la experiencia de caries de los niños del estudio. Se analizarán de forma conjunta nuestros resultados con los publicados por otros autores. De esta forma se logrará una mejor comprensión de los factores históricos y ecológicos que han moldeado su distribución y aportar conocimientos a la sistemática del grupo “mutans” en relación a otras bacterias del género Streptococcus. Dental caries is an infectious, chronic and transmissible disease, characterized by demineralization of the hard tissues of the teeth, produced by the action of acids resulting from the metabolic activity of biofilm developed on the teeth. Although the etiology of caries would be polymicrobial, the streptococci of the mutans group are identified as the major responsible in the initiation of the carious lesion. In the cell wall there are proteins involved in adhesion, aggregation and co-aggregation processes, as well as polysaccharides that present different antigenic specificities, which allow the distinction of four serotypes c, e, f and k. There is little information about the antigenic characteristics of the Streptococcus mutans strains and the relationship of those characteristics with the caries activity is unknown. In the present study our goals are to identify and characterize the phenotypic and genotypic strains of streptococci of the mutans group circulating in the province of Cordoba. The study population will consist of urban and rural scholar children from Cordoba city and from the interior of the province. In order to study the molecular systematic, and the genetic structure of S. mutans, different serotypes will be determined by multiplex PCR amplifications and eight genes will be sequenced by using the multilocus typing technique. Once the diversity and the geographical distribution patterns of S. mutans from the center of Argentina is characterized, we will attempt to clarify how the genetic diversity is related with the caries experience in the children of the study. Our results will be analyzed together with those published by other authors. This will achieve a better understanding of the historical and ecological factors that shaped the bacteria’s distribution and will contribute to the knowledge of the systematic of the mutans group in relation to other bacteria of the genus Streptococcus.