Three-step pathway engineering results in more incidence rate and higher emission of nerolidol and improved attraction of Diadegma semiclausum

The concentration and ratio of terpenoids in the headspace volatile blend of plants have a fundamental role in the communication of plants and insects. The sesquiterpene (E)-nerolidol is one of the important volatiles with effect on beneficial carnivores for biologic pest management in the field. To optimize de novo biosynthesis and reliable and uniform emission of (E)-nerolidol, we engineered different steps of the (E)-nerolidol biosynthesis pathway in Arabidopsis thaliana. Introduction of a mitochondrial nerolidol synthase gene mediates de novo emission of (E)-nerolidol and linalool. Co-expression of the mitochondrial FPS1 and cytosolic HMGR1 increased the number of emitting transgenic plants (incidence rate) and the emission rate of both volatiles. No association between the emission rate of transgenic volatiles and their growth inhibitory effect could be established. (E)-Nerolidol was to a large extent metabolized to non-volatile conjugates.

Three-dimensional hydrodynamic numerical modelling of fold nappe formation, basement-cover deformation and slab detachment with applications to the helvetic nappe system (W Switzerland)

Many three-dimensional (3-D) structures in rock, which formed during the deformation of the Earth's crust and lithosphere, are controlled by a difference in mechanical strength between rock units and are often the result of a geometrical instability. Such structures are, for example, folds, pinch-and-swell structures (due to necking) or cuspate-lobate structures (mullions). These struc-tures occur from the centimeter to the kilometer scale and the related deformation processes con-trol the formation of, for example, fold-and-thrust belts and extensional sedimentary basins or the deformation of the basement-cover interface. The 2-D deformation processes causing these structures are relatively well studied, however, several processes during large-strain 3-D defor-mation are still incompletely understood. One of these 3-D processes is the lateral propagation of these structures, such as fold and cusp propagation in a direction orthogonal to the shortening direction or neck propagation in direction orthogonal to the extension direction. Especially, we are interested in fold nappes which are recumbent folds with amplitudes usually exceeding 10 km and they have been presumably formed by ductile shearing. They often exhibit a constant sense of shearing and a non-linear increase of shear strain towards their overturned limb. The fold axes of the Morcles fold nappe in western Switzerland plunges to the ENE whereas the fold axes in the more eastern Doldenhorn nappe plunges to the WSW. These opposite plunge direc-tions characterize the Rawil depression (Wildstrubel depression). The Morcles nappe is mainly the result of layer parallel contraction and shearing. During the compression the massive lime-stones were more competent than the surrounding marls and shales, which led to the buckling characteristics of the Morcles nappe, especially in the north-dipping normal limb. The Dolden-horn nappe exhibits only a minor overturned fold limb. There are still no 3-D numerical studies which investigate the fundamental dynamics of the formation of the large-scale 3-D structure including the Morcles and Doldenhorn nappes and the related Rawil depression. We study the 3-D evolution of geometrical instabilities and fold nappe formation with numerical simulations based on the finite element method (FEM). Simulating geometrical instabilities caused by sharp variations of mechanical strength between rock units requires a numerical algorithm that can accurately resolve material interfaces for large differences in material properties (e.g. between limestone and shale) and for large deformations. Therefore, our FE algorithm combines a nu-merical contour-line technique and a deformable Lagrangian mesh with re-meshing. With this combined method it is possible to accurately follow the initial material contours with the FE mesh and to accurately resolve the geometrical instabilities. The algorithm can simulate 3-D de-formation for a visco-elastic rheology. The viscous rheology is described by a power-law flow law. The code is used to study the 3-D fold nappe formation, the lateral propagation of folding and also the lateral propagation of cusps due to initial half graben geometry. Thereby, the small initial geometrical perturbations for folding and necking are exactly followed by the FE mesh, whereas the initial large perturbation describing a half graben is defined by a contour line inter-secting the finite elements. Further, the 3-D algorithm is applied to 3-D viscous nacking during slab detachment. The results from various simulations are compared with 2-D resulats and a 1-D analytical solution. -- On retrouve beaucoup de structures en 3 dimensions (3-D) dans les roches qui ont pour origines une déformation de la lithosphère terrestre. Ces structures sont par exemple des plis, des boudins (pinch-and-swell) ou des mullions (cuspate-lobate) et sont présentés de l'échelle centimétrique à kilométrique. Mécaniquement, ces structures peuvent être expliquées par une différence de résistance entre les différentes unités de roches et sont généralement le fruit d'une instabilité géométrique. Ces différences mécaniques entre les unités contrôlent non seulement les types de structures rencontrées, mais également le type de déformation (thick skin, thin skin) et le style tectonique (bassin d'avant pays, chaîne d'avant pays). Les processus de la déformation en deux dimensions (2-D) formant ces structures sont relativement bien compris. Cependant, lorsque l'on ajoute la troisiéme dimension, plusieurs processus ne sont pas complètement compris lors de la déformation à large échelle. L'un de ces processus est la propagation latérale des structures, par exemple la propagation de plis ou de mullions dans la direction perpendiculaire à l'axe de com-pression, ou la propagation des zones d'amincissement des boudins perpendiculairement à la direction d'extension. Nous sommes particulièrement intéressés les nappes de plis qui sont des nappes de charriage en forme de plis couché d'une amplitude plurikilométrique et étant formées par cisaillement ductile. La plupart du temps, elles exposent un sens de cisaillement constant et une augmentation non linéaire de la déformation vers la base du flanc inverse. Un exemple connu de nappes de plis est le domaine Helvétique dans les Alpes de l'ouest. Une de ces nap-pes est la Nappe de Morcles dont l'axe de pli plonge E-NE tandis que de l'autre côté de la dépression du Rawil (ou dépression du Wildstrubel), la nappe du Doldenhorn (équivalent de la nappe de Morcles) possède un axe de pli plongeant O-SO. La forme particulière de ces nappes est due à l'alternance de couches calcaires mécaniquement résistantes et de couches mécanique-ment faibles constituées de schistes et de marnes. Ces différences mécaniques dans les couches permettent d'expliquer les plissements internes à la nappe, particulièrement dans le flanc inver-se de la nappe de Morcles. Il faut également noter que le développement du flanc inverse des nappes n'est pas le même des deux côtés de la dépression de Rawil. Ainsi la nappe de Morcles possède un important flanc inverse alors que la nappe du Doldenhorn en est presque dépour-vue. A l'heure actuelle, aucune étude numérique en 3-D n'a été menée afin de comprendre la dynamique fondamentale de la formation des nappes de Morcles et du Doldenhorn ainsi que la formation de la dépression de Rawil. Ce travail propose la première analyse de l'évolution 3-D des instabilités géométriques et de la formation des nappes de plis en utilisant des simulations numériques. Notre modèle est basé sur la méthode des éléments finis (FEM) qui permet de ré-soudre avec précision les interfaces entre deux matériaux ayant des propriétés mécaniques très différentes (par exemple entre les couches calcaires et les couches marneuses). De plus nous utilisons un maillage lagrangien déformable avec une fonction de re-meshing (production d'un nouveau maillage). Grâce à cette méthode combinée il nous est possible de suivre avec précisi-on les interfaces matérielles et de résoudre avec précision les instabilités géométriques lors de la déformation de matériaux visco-élastiques décrit par une rhéologie non linéaire (n>1). Nous uti-lisons cet algorithme afin de comprendre la formation des nappes de plis, la propagation latérale du plissement ainsi que la propagation latérale des structures de type mullions causé par une va-riation latérale de la géométrie (p.ex graben). De plus l'algorithme est utilisé pour comprendre la dynamique 3-D de l'amincissement visqueux et de la rupture de la plaque descendante en zone de subduction. Les résultats obtenus sont comparés à des modèles 2-D et à la solution analytique 1-D. -- Viele drei dimensionale (3-D) Strukturen, die in Gesteinen vorkommen und durch die Verfor-mung der Erdkruste und Litosphäre entstanden sind werden von den unterschiedlichen mechani-schen Eigenschaften der Gesteinseinheiten kontrolliert und sind häufig das Resulat von geome-trischen Istabilitäten. Zu diesen strukturen zählen zum Beispiel Falten, Pich-and-swell Struktu-ren oder sogenannte Cusbate-Lobate Strukturen (auch Mullions). Diese Strukturen kommen in verschiedenen Grössenordungen vor und können Masse von einigen Zentimeter bis zu einigen Kilometer aufweisen. Die mit der Entstehung dieser Strukturen verbundenen Prozesse kontrol-lieren die Entstehung von Gerbirgen und Sediment-Becken sowie die Verformung des Kontaktes zwischen Grundgebirge und Stedimenten. Die zwei dimensionalen (2-D) Verformungs-Prozesse die zu den genannten Strukturen führen sind bereits sehr gut untersucht. Einige Prozesse wäh-rend starker 3-D Verformung sind hingegen noch unvollständig verstanden. Einer dieser 3-D Prozesse ist die seitliche Fortpflanzung der beschriebenen Strukturen, so wie die seitliche Fort-pflanzung von Falten und Cusbate-Lobate Strukturen senkrecht zur Verkürzungsrichtung und die seitliche Fortpflanzung von Pinch-and-Swell Strukturen othogonal zur Streckungsrichtung. Insbesondere interessieren wir uns für Faltendecken, liegende Falten mit Amplituden von mehr als 10 km. Faltendecken entstehen vermutlich durch duktile Verscherung. Sie zeigen oft einen konstanten Scherungssinn und eine nicht-lineare zunahme der Scherverformung am überkipp-ten Schenkel. Die Faltenachsen der Morcles Decke in der Westschweiz fallen Richtung ONO während die Faltenachsen der östicher gelegenen Doldenhorn Decke gegen WSW einfallen. Diese entgegengesetzten Einfallrichtungen charakterisieren die Rawil Depression (Wildstrubel Depression). Die Morcles Decke ist überwiegend das Resultat von Verkürzung und Scherung parallel zu den Sedimentlagen. Während der Verkürzung verhielt sich der massive Kalkstein kompetenter als der Umliegende Mergel und Schiefer, was zur Verfaltetung Morcles Decke führ-te, vorallem in gegen Norden eifallenden überkippten Schenkel. Die Doldenhorn Decke weist dagegen einen viel kleineren überkippten Schenkel und eine stärkere Lokalisierung der Verfor-mung auf. Bis heute gibt es keine 3-D numerischen Studien, die die fundamentale Dynamik der Entstehung von grossen stark verformten 3-D Strukturen wie den Morcles und Doldenhorn Decken sowie der damit verbudenen Rawil Depression untersuchen. Wir betrachten die 3-D Ent-wicklung von geometrischen Instabilitäten sowie die Entstehung fon Faltendecken mit Hilfe von numerischen Simulationen basiert auf der Finite Elemente Methode (FEM). Die Simulation von geometrischen Instabilitäten, die aufgrund von Änderungen der Materialeigenschaften zwischen verschiedenen Gesteinseinheiten entstehen, erfortert einen numerischen Algorithmus, der in der Lage ist die Materialgrenzen mit starkem Kontrast der Materialeigenschaften (zum Beispiel zwi-schen Kalksteineinheiten und Mergel) für starke Verfomung genau aufzulösen. Um dem gerecht zu werden kombiniert unser FE Algorithmus eine numerische Contour-Linien-Technik und ein deformierbares Lagranges Netz mit Re-meshing. Mit dieser kombinierten Methode ist es mög-lich den anfänglichen Materialgrenzen mit dem FE Netz genau zu folgen und die geometrischen Instabilitäten genügend aufzulösen. Der Algorithmus ist in der Lage visko-elastische 3-D Ver-formung zu rechnen, wobei die viskose Rheologie mit Hilfe eines power-law Fliessgesetzes beschrieben wird. Mit dem numerischen Algorithmus untersuchen wir die Entstehung von 3-D Faltendecken, die seitliche Fortpflanzung der Faltung sowie der Cusbate-Lobate Strukturen die sich durch die Verkürzung eines mit Sediment gefüllten Halbgraben bilden. Dabei werden die anfänglichen geometrischen Instabilitäten der Faltung exakt mit dem FE Netz aufgelöst wäh-rend die Materialgranzen des Halbgrabens die Finiten Elemente durchschneidet. Desweiteren wird der 3-D Algorithmus auf die Einschnürung während der 3-D viskosen Plattenablösung und Subduktion angewandt. Die 3-D Resultate werden mit 2-D Ergebnissen und einer 1-D analyti-schen Lösung verglichen.

Three essays in behavioral and experimental economics

The present PhD dissertation consists of three papers, organized in chapters, in the field of behavioral economics. This discipline studies economic behavior of individuals subject to limitations, such as bounded self-interest and bounded willpower. The behavior studied in the present thesis ranges from the complex decision to register as an organ donor, decision¬making in the presence of uncertainty and the decision to give money to a charitable organization. The first chapter aims at testing the effectiveness of an active-decision (AD) mechanism on the decision to become an organ donor in Switzerland, using field experiments. We found that stimulating participants' reflection on the topic of organ donation had a negative effect on the decision to become an organ donor. Moreover, a non-binding commitment nudge reduces putting off the decision, but does not lead to donation rates higher than in the control group. The results suggest that AD may be far more limited than previously thought and raise doubts about the efficacy of engaging potential donors to reflect on the topic of organ donation. Beyond carrying for others, behavioral economics also recognizes that individuals do not evaluate outcomes in absolute terms but rather by comparing them to some reference levels, called reference points. Above the reference points, economic outcomes are perceived as gains, while below these levels the same outcomes are felt as losses. The last two chapters analyze the importance of reference points in the evaluation of economic outcomes. Using a laboratory experiment where subjects played two consecutive lotteries, Chapter 2 studies the speed of adjustment of the reference point. We find that varying the probability of winning the first lottery has no effect on subjects' risk behavior regarding the second lottery. This result indicates a very fast adjustment of the reference point to the latest information. Chapter 3 investigates whether reference points are relevant for charitable preferences. Using actual donation decisions of participants in a laboratory experiment, the results suggest that reference points are not crucial for shaping charitable giving. -- Cette thèse de doctorat consiste en trois articles, organisés en chapitres, dans le domaine de l'économie comportementale. Cette discipline étudie le comportement d'agents économiques sujets à des limitations, telles qu'un égoïsme limité et une volonté limitée. Le comportement étudié dans cette thèse va de la décision complexe de devenir donneur d'organes, la prise de décision en présence d'incertitude à la décision de donner de l'argent à une oeuvre caritative. Le premier chapitre vise à tester l'efficacité d'un mécanisme de « décision active » (active decision, AD) sur la décision de devenir donneur d'organes en Suisse, et ce en recourant à deux expériences hors-laboratoire. Les résultats montrent que stimuler la réflexion des participants sur le don d'organes a un effet négatif sur la décision de devenir donneur. De plus, un mécanisme qui encourage les participants à prendre une décision sur le champ réduit la tendance à procrastiner, mais ne mène pas à un taux de donneurs plus élevé par rapport à un groupe de contrôle. Les résultats suggèrent que le mécanisme AD est bien plus limité que ce qui a été supposé jusqu'à maintenant. De plus, ils suscitent le doute quant à l'efficacité de stimuler la réflexion de potentiels donneurs sur le sujet du don d'organes. En plus de se soucier des autres, l'économie comportementale admet également que les individus n'évaluent pas les résultats de façon absolue, mais en comparant ceux-ci à des niveaux de références, souvent appelés points de référence. Au-dessus de ces points de référence, les résultats sont perçus en tant que gains, tandis qu'en-dessous ces mêmes résultats sont considérés comme des pertes. Les deux derniers chapitres analysent l'importance des points de référence dans diverses situations. A l'aide d'une expérience en laboratoire dans laquelle les participants participent à deux loteries consécutives, le chapitre 2 étudie la vitesse d'ajustement du point de référence. Le résultat montre que varier la probabilité de gagner la première loterie n'a aucun effet sur le comportement en matière de risques concernant la deuxième loterie. Cela indique un ajustement très rapide du point de référence. Le chapitre 3 vise à déterminer si les points de référence ont un rôle majeur concernant les préférences caritatives. Les données relatives aux décisions de don des participants d'une expérience en laboratoire montrent que les points de référence n'influencent pas significativement le don caritatif.

SOIL ATTRIBUTES THREE YEARS AFTER MAKING RIDGES AND OR DRAINS FOR PLANTING GRAPEVINE ROOTSTOCK

RESUMO Os atributos do solo estão relacionados com o desenvolvimento e a produção das culturas, tanto anuais como perenes. O presente trabalho teve como objetivo determinar os atributos químicos e físicos do solo três anos após a aplicação de sistemas de manejo para implantação de porta-enxertos de videira, em um Nitossolo Vermelho com textura muito argilosa. Os sistemas de manejo consistiram na confecção ou não de camalhões e/ou de drenos antes da implantação das mudas de porta-enxertos Dog Ridge. Os atributos químicos (pH em água e teores de matéria orgânica e de macronutrientes) foram determinados em amostras coletadas na linha da cultura, nas camadas de 0-0,1; 0,1-0,2; 0,2-0,3 e 0,3-0,4 m de profundidade. Os atributos físicos do solo (teor de argila, densidade, porosidade, resistência à penetração e estabilidade dos agregados) foram determinados em amostras coletadas com estrutura preservada nas camadas de 0,025-0,075; 0,125-0,175; 0,225-0,275 e 0,325-0,375 m de profundidade. Também foram determinadas a massa seca de raízes do portaenxerto nas camadas de 0-0,2 e 0,2-0,4 m de profundidade e suas correlações com os atributos do solo. A confecção de camalhões alterou significativamente a maioria dos atributos químicos do solo e proporcionou maior uniformidade nos valores em profundidade, criando condições mais favoráveis ao crescimento radicular nas camadas mais profundas. Os atributos físicos foram menos afetados do que os químicos pela confecção de camalhões ou drenos, e não foram observados valores restritivos ao crescimento radicular nas camadas amostradas após quatro anos da aplicação dos sistemas de manejo do solo. A confecção de drenos alterou menos os atributos químicos e físicos do solo do que a confecção de camalhões.

The dynamics of coexistence: habitat sharing versus segregation patterns among three sympatric montane vipers

Contact zones of closely related and ecologically similar species constitute rare opportunities to study the evolutionary consequences of past speciation processes. They represent natural laboratories in which strong competition could lead to the exclusion of one species, or the various species may switch into distinct ecological niches. Alternatively, if reproductive isolation has not yet been achieved, they may hybridize. We elucidate the degree of taxon integrity by comparing genetics and habitat use of three similar-sized congeneric viper species, Vipera ammodytes, Viperaaspis, and Viperaberus, of Nadiza Valley in western Slovenia. No hybridization was detected for either mitochondrial or nuclear genomes. Similarly, external intermediacy by a single prestudy viper (probably V.ammodytesxV. aspis) indicates that hybridization occasionally occurs, but should be very rare. Populations of the three related viperids are partially allopatric in Nadiza Valley, but they also coexist in a narrow contact zone in the montane grassland along the south-exposed slope of Mount Stol (1673m a.s.l.). Here, the three species that occupy areas in or near patches of rocky microhabitats (e.g. stone piles, slides, and walls) live in syntopy. However, fine-scale measurements of structural components show partial habitat segregation, in which V.berus becomes more dominant at elevations above 1400m and occupies mostly the mountain ridge and north-exposed slopes of Mount Stol, V.aspis occurs below 1300m and is the only species to inhabit stoneless patches of grass and bushes around 1000m and lower, and V.ammodytes occurs at all elevations up to 1500m, but is restricted to a rocky microhabitat. We suggest that a high degree of microstructure divergence, slightly different environmental niches, and a generally favourable habitat for all three viper species, keep the pressure for mis-mating and hybridization low, although mechanisms such as reduced hybrid inferiority and temporal mating segregation cannot yet be excluded.

Representations of work and worker in the three generations of knowledge management. Critical Discourse Analysis of selected texts.

The thesis studies the representations of different elements of contemporary work as present in Knowledge Management (KM). KM is approached as management discourse that is seen to affect and influence managerial practices in organizations. As representatives of KM discourse four journal articles are analyzed, using the methodology of Critical Discourse Analysis and the framework of Critical Management Studies, with a special emphasis on the question of structure and agency. The results of the analysis reveal that structural elements such as information technology and organizational structures are strongly present in the most influential KM representations, making their improvement also a desirable course of action for managers. In contrast agentic properties are not in a central role, they are subjugated to structural constraints of varying kind and degree. The thesis claims that one such constraint is KM discourse itself, influencing managerial and organizational choices and decision making. The thesis concludes that the way human beings are represented, studied and treated in management studies such as KM needs to be re-examined. Pro gradu-tutkielmassa analysoidaan työhön ja sen tekijään liittyviä representaatioita Tietojohtamisen kirjallisuudessa. Tietojohtamista tarkastellaan liikkeenjohdollisena diskurssina, jolla nähdään olevan vaikutus organisaatioiden päätöksentekoon ja toimintaan. Tutkielmassa analysoidaan neljä Tietojohtamisen tieteellistä artikkelia, käyttäen metodina kriittistä diskurssianalyysiä. Tutkielman viitekehyksenä on kriittinen liikkeenjohdon tutkimus. Lisäksi työssä pohditaan kysymystä rakenteen ja toimijan välisestä vuorovaikutuksesta. Tutkielman analyysi paljastaa, että tietojohtamisen vaikutusvaltaisimmat representaatiot painottavat rakenteellisia tekijöitä, kuten informaatioteknologiaa ja organisaatiorakenteita. Tämän seurauksena mm. panostukset em. tekijöihin nähdään organisaatioissa toivottavana toimintana. Vastaavasti representaatiot jotka painottavat yksilöitä ja toimintaa ovat em. tekijöille alisteisessa asemassa. Tapaa, jolla yksilöitä kuvataan ja käsitellään Tietojohtamisen diskurssissa, tulisikin laajentaa ja monipuolistaa.

Cost evaluation and comparison of three decision strategies for cardiac revascularization : results of the suspected CAD protocol of the European CMR registry

Background: The public health burden of coronary artery disease (CAD) is important. Perfusion cardiac magnetic resonance (CMR) is generally accepted to detect and monitor CAD. Few studies have so far addressed its costs and costeffectiveness. Objectives: To compare in a large CMR registry the costs of a CMR-guided strategy vs two hypothetical invasive strategies for the diagnosis and the treatment of patients with suspected CAD. Methods: In 3'647 patients with suspected CAD included prospectively in the EuroCMR Registry (59 centers; 18 countries) costs were calculated for diagnostic examinations, revascularizations as well as for complication management over a 1-year follow-up. Patients with ischemia-positive CMR underwent an invasive X-ray coronary angiography (CXA) and revascularization at the discretion of the treating physician (=CMR+CXA strategy). Ischemia was found in 20.9% of patients and 17.4% of them were revascularized. In ischemia-negative patients by CMR, cardiac death and non-fatal myocardial infarctions occurred in 0.38%/y. In a hypothetical invasive arm the costs were calculated for an initial CXA followed by FFR testing in vessels with ≥50% diameter stenoses (=CXA+FFR strategy). To model this hypothetical arm, the same proportion of ischemic patients and outcome was assumed as for the CMR+CXA strategy. The coronary stenosis - FFR relationship reported in the literature was used to derive the proportion of patients with ≥50% diameter stenoses (Psten) in the study cohort. The costs of a CXA-only strategy were also calculated. Calculations were performed from a third payer perspective for the German, UK, Swiss, and US healthcare systems.

Three Essays on International Trade and the Labor Market

The thesis is made of three independent chapters interested in the impact of globalization on workers in industrialized countries. The dissertation is especially focused on identifying the causal impact of international trade on workers' mobility, wages, and employment with both a short- and medium-term perspective. The first paper explores the relation between intra-industry trade (IIT) expansion and associated worker flows, taking the latter as an indicator of labor-market adjustment costs. Being the first study to combine theoretical simulations and a novel identification strategy, we find that both theoretical and empirical analyses are consistent with the "smooth adjustment hypothesis", according to which IIT expansion is less disruptive than inter-industry trade expansion. The study therefore lends support to the use of IIT indices as first-pass proxies for the adjustment effects of trade expansion. The second chapter contrasts the impact of increased import competition coming from China and the European Union (EU) on workers in the United Kingdom over a 15-year period. The most salient findings show that increased imports from China had significantly negative effects on workers' earnings, wages and employment. In contrast, larger imports from the EU are associated with positive worker-level outcomes, which is largely explained by the fact that increased imports from the EU were mostly offset by increased same-industry exports to the EU. Besides, we find that increased imports from China exert additional pressure on workers through spillovers to employment and wages in downstream industries. Finally, the last chapter is focused on the impact of exposure to trade and real exchange rate shocks on wages for Swiss manufacturing workers. A particular attention is made to consistently estimate the causal effect in using a two-step gravity-type identification strategy. The study shows that the impact of trade and exchange rate movements is concentrated among high-skilled workers almost exclusively.

Establishment of a Developmental Compartment Requires Interactions between Three Synergistic Cis-regulatory Modules.

The subdivision of cell populations in compartments is a key event during animal development. In Drosophila, the gene apterous (ap) divides the wing imaginal disc in dorsal vs ventral cell lineages and is required for wing formation. ap function as a dorsal selector gene has been extensively studied. However, the regulation of its expression during wing development is poorly understood. In this study, we analyzed ap transcriptional regulation at the endogenous locus and identified three cis-regulatory modules (CRMs) essential for wing development. Only when the three CRMs are combined, robust ap expression is obtained. In addition, we genetically and molecularly analyzed the trans-factors that regulate these CRMs. Our results propose a three-step mechanism for the cell lineage compartment expression of ap that includes initial activation, positive autoregulation and Trithorax-mediated maintenance through separable CRMs.