Access to the frontal sinus and zygomatico frontal suture through the supratarsal fold

Precise repositioning of a fractured zygoma is difficult. The traditional approach is through an eyebrow incision, but it can produce a scar that causes aesthetic and psychological problems for the patient. We describe the supratarsal fold approach to expose the frontozygomatic suture and to reduce small displacements of frontal sinus anterior wall; it gives good access and excellent aesthetic results. (C) 2007 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

The comparative field body temperature among Liolaemus lizards: Testing the static and the labile hypotheses

Two competing hypotheses have been suggested to explain thermal sensitivity of lizards to environmental conditions. These are the static and the labile hypotheses. The static hypothesis posits that thermal physiology is evolutionary conservative and consequently relatively insensitive to directional selection. Contrarily, the labile hypothesis states that thermal physiology does respond readily to directional selection in some lizard taxa. In this paper, we tested both hypotheses among species of Liolaemus lizards. The genus Liolaemus is diverse with about 200 species, being broadly distributed from central Peru to Tierra del Fuego at the southern end of South America. Data of field body temperature (T(b)) from Liolaemus species were collected from the literature. Based on the distributional range of the species we also collected data of mean annual ambient temperatures. We observed that both the traditional analysis and the phylogenetic approach indicate that in the genus Liolaemus T(b) of species varies in a manner that is consistent with ecological gradient of ambient temperature. The data suggest that the thermal physiology of Liolaemus lizards is evolutionarily flexible, and that this plasticity has been partially responsible for the colonization of a wide array of thermal environments. (C) 2009 Elsevier Ltd. All rights reserved.

The timing of Neotropical speciation dynamics: A reconstruction of Myiopagis flycatcher diversification using phylogenetic and paleogeographic data

Neotropical forests have brought forth a large proportion of the world`s terrestrial biodiversity, but the underlying evolutionary mechanisms and their timing require further elucidation. Despite insights gained from phylogenetic studies, uncertainties about molecular clock rates have hindered efforts to determine the timing of diversification processes. Moreover, most molecular research has been detached from the extensive body of data on Neotropical geology and paleogeography. We here examine phylogenetic relationships and the timing of speciation events in a Neotropical flycatcher genus (Myiopagis) by using calibrations from modern geologic data in conjunction with a number of recently developed DNA sequence dating algorithms and by comparing these estimates with those based on a range of previously proposed molecular clock rates. We present a well-supported hypothesis of systematic relationships within the genus. Our age estimates of Myiopagis speciation events based on paleogeographic data are in close agreement with nodal ages derived from a ""traditional"" avian mitochondrial 2%/My clock, while contradicting other clock rates. Our comparative approach corroborates the consistency of the traditional avian mitochondrial clock rate of 2%/My for tyrant-flycatchers. Nevertheless, our results argue against the indiscriminate use of molecular clock rates in evolutionary research and advocate the verification of the appropriateness of the traditional clock rate by means of independent calibrations in individual studies. (C) 2009 Elsevier Inc. All rights reserved.

A new proposal for the picture changing operators in the minimal pure spinor formalism

Using a new proposal for the ""picture lowering"" operators, we compute the tree level scattering amplitude in the minimal pure spinor formalism by performing the integration over the pure spinor space as a multidimensional Cauchy-type integral. The amplitude will be written in terms of the projective pure spinor variables, which turns out to be useful to relate rigorously the minimal and non-minimal versions of the pure spinor formalism. The natural language for relating these formalisms is the. Cech-Dolbeault isomorphism. Moreover, the Dolbeault cocycle corresponding to the tree-level scattering amplitude must be evaluated in SO(10)/SU(5) instead of the whole pure spinor space, which means that the origin is removed from this space. Also, the. Cech-Dolbeault language plays a key role for proving the invariance of the scattering amplitude under BRST, Lorentz and supersymmetry transformations, as well as the decoupling of unphysical states. We also relate the Green`s function for the massless scalar field in ten dimensions to the tree-level scattering amplitude and comment about the scattering amplitude at higher orders. In contrast with the traditional picture lowering operators, with our new proposal the tree level scattering amplitude is independent of the constant spinors introduced to define them and the BRST exact terms decouple without integrating over these constant spinors.

Pupils' Interaction with the Exhibits According to the Learning Behaviour Model

Science centres are one of the best opportunities for informal study of natural science. There are many advantages to learn in the science centres compared with the traditional methods: it is possible to motivate and supply visitors with the social experience, to improve people’s understandings and attitudes, thereby bringing on and attaching wider interest towards natural science. In the science centres, pupils show interest, enthusiasm, motivation, self-confidence, sensitiveness and also they are more open and eager to learn. Traditional school-classes however mostly do not favour these capabilities. This research presents the qualitative study in the science centre. Data was gathered from observations and interviews at Science North science centre in Canada. Pupils’ learning behaviours were studied at different exhibits in the science centre. Learning behaviours are classified as follows: labels reading, experimenting with the exhibits, observing others or exhibit, using guide, repeating the activity, positive emotional response, acknowledged relevance, seeking and sharing information. In this research, it became clear that in general pupils do not read labels; in most cases pupils do not use the guides help; pupils prefer exhibits that enable high level of interactivity; pupils display more learning behaviours at exhibits that enable a high level of interactivity.

Implementation and role of device management Solutions to the end users

This research is based on consumer complaints with respect to recently purchased consumer electronics. This research document will investigate the instances of development and device management as a tool used to aid consumer and manage consumer’s mobile products in order to resolve issues in or before the consumers is aware one exists. The problem at the present time is that mobile devices are becoming very advanced pieces of technology, and not all manufacturers and network providers have kept up the support element of End users. As such, the subject of the research is to investigate how device management could possibly be used as a method to promote research and development of mobile devices, and provide a better experience for the consumer. The wireless world is becoming increasingly complex as revenue opportunities are driven by new and innovative data services. We can no longer expect the customer to have the knowledge or ability to configure their own device. Device Management platforms can address the challenges of device configuration and support through new enabling technologies. Leveraging these technologies will allow a network operator to reduce the cost of subscriber ownership, drive increased ARPU (Average Revenue per User) by removing barriers to adoption, reduce churn by improving the customer experience and increase customer loyalty. DM technologies provide a flexible and powerful management method but are managing the same device features that have historically been configured manually through call centers or by the end user making changes directly on the device. For this reason DM technologies must be treated as part of a wider support solution. The traditional requirement for discovery, fault finding, troubleshooting and diagnosis are still as relevant with DM as they are in the current human support environment yet the current generation of solutions do little to address this problem. In the deployment of an effective Device Management solution the network operator must consider the integration of the DM platform, interfacing with many areas of the business, supported by knowledge of the relationship between devices, applications, solutions and services maintained on an ongoing basis. Complementing the DM solution with published device information, setup guides, training material and web based tools will ensure the quality of the customer experience, ensuring that problems are completely resolved, driving data usage by focusing customer education on the use of the wireless service In this way device management becomes a tool used both internally within the network or device vendor and by the customer themselves, with each user empowered to effectively manage the device without any prior knowledge or experience, confident that changes they apply will be relevant, accurate, stable and compatible. The value offered by an effective DM solution with an expert knowledge service will become a significant differentiator for the network operator in an ever competitive wireless market. This research document is intended to highlight some of the issues the industry faces as device management technologies become more prevalent, and offers some potential solutions to simplify the increasingly complex task of managing devices on the network, where device management can be used as a tool to aid customer relations and manage customer’s mobile products in order to resolve issues before the user is aware one exists. The research is broken down into the following, Customer Relationship Management, Device management, the role of knowledge with the DM, Companies that have successfully implemented device management, and the future of device management and CRM. And it also consists of questionnaires aimed at technical support agents and mobile device users. Interview was carried out with CRM managers within support centre to further the evidence gathered. To conclude, the document is to consider the advantages and disadvantages of device management and attempt to determine the influence it will have over customer support centre, and what methods could be used to implement it.

In Bio-Fuel We Trust

In bio-fuel we trust. Or do we? In this chapter, ethnographic material from Sweden is used to discuss ways sin which trust may influence the choice of bio-fuel for heating purposes. The meaning and substance of trust or distrust, as well as the very conditions for trust, are elaborated on in relation to solar and bio-pellet systems, district heating with bio-fuel, and traditional fireplaces. An important conclusion of this chapter is that the degree to which people perceive others as being like themselves or not tends to be decisive for whether these others are to be trusted, and therefore worth listening to. The context and situation in which a certain heating system is being chosen does not only involve trust in individuals, however, but in companies and the authorities, as well as in the arterfacts themselves. An example is given on how distrust of district heating companies led house owners to reject an offer of district heating despite the comfort and environmental benefit this could have provided. it is shown how this distrust might be resolved by making the rhythm of households and sitrict heating companies more in step with one another. The strong emotional attachment to and deep-felt trust in the traditional fireplace is also analysed, and a question is put forward as to whether these feelings could be transferred to modern bio-pellet stoves. Finally, our great and assured trust in bio-fuel as a main solution to global climate change is shortly commented upon and partly questioned.

Passive crosslaminated timber buildings : Final report Cerbof-project no. 76

In this project, Stora Enso’s newly developed building system has been further developed to allow building to the Swedish passive house standard for the Swedish climate. The building system is based on a building framework of CLT (Cross laminated timber) boards. The concept has been tested on a small test building. The experience gained from this test building has also been used for planning a larger building (two storeys with the option of a third storey) with passive house standard with this building system. The main conclusions from the project are:  It is possible to build airtight buildings with this technique without using traditional vapour barriers. Initial measurements show that this can be done without reaching critical humidity levels in the walls and roof, at least where wood fibre insulation is used, as this has a greater capacity for storing and evening out the moisture than mineral wool. However, the test building has so far not been exposed to internal generation of moisture (added moisture from showers, food preparation etc.). This needs to be investigated and this will be done during the winter 2013-14.  A new fixing method for doors and windows has been tested without traditional fibre filling between them and the CLT panel. The door or window is pressed directly on to the CLT panel instead, with an expandable sealing strip between them. This has been proved to be successful.  The air tightness between the CLT panels is achieved with expandable sealing strips between the panels. The position of the sealing strips is important, both for the air tightness itself and to allow rational assembly.  Recurrent air tightness measurements show that the air tightness decreased somewhat during the first six months, but not to such an extent that the passive house criteria were not fulfilled. The reason for the decreased air tightness is not clear, but can be due to small movements in the CLT construction and also to the sealing strips being affected by changing outdoor temperatures.  Long term measurements (at least two years) have to be carried out before more reliable conclusions can be drawn regarding the long term effect of the construction on air tightness and humidity in the walls.  An economic analysis comparing using a concrete frame or the studied CLT frame for a three storey building shows that it is probably more expensive to build with CLT. For buildings higher than three floors, the CLT frame has economic advantages, mainly because of the shorter building time compared to using concrete for the frame. In this analysis, no considerations have been taken to differences in the influence on the environment or the global climate between the two construction methods.

Ways of knowing in ways of moving : A study of the meaning of capability to move

The overall aim of this thesis has been to investigate the meaning of the capability to move in order to identify and describe this capability from the perspective of the one who moves in relation to specific movements. It has been my ambition to develop ways to explicate, and thereby open up for discussion, what might form an educational goal in the context of movements and movement activities in the school subject of physical education and health (PEH). In this study I have used a practical epistemological perspective on capability to move, a perspective that challenges the traditional distinction between mental and physical skills as well as between theoretical and practical knowledge. Movement actions, or ways of moving, are seen as expressions of knowing. In order to explore an understanding of the knowing involved in specific ways of moving, observations of  actors’ ways of moving and their own experiences of moving were brought together. Informants from three different arenas took part: from PEH in upper secondary school, from athletics and from free-skiing. The results of the analyses suggest it is possible to describe practitioners’ developed knowing as a number of specific ways of knowing that are in turn related to specific ways of moving. Examples of such specific ways of moving may be discerning and modifying one’s own rotational velocity and navigating one’s (bodily) awareness. Additionally, exploring learners’ pre-knowing of a movement ‘as something’ may be fruitful when planning the teaching and learning of capability to move. I have suggested that these specific ways of knowing might be regarded as educational goals in PEH. In conducting this study, I have also had the ambition to contribute to the ongoing discussion of what ‘ability’ in the PEH context might mean. In considering specific ways of knowing in moving, the implicit and taken-for-granted meaning of ‘standards of excellence’ and ‘sports ability’can be discussed, and challenged.

A finite sample improvement of the fixed effects estimator : applied to technical infficiency

The FE ('fixed effects') estimator of technical inefficiency performs poorly when N ('number of firms') is large and T ('number of time observations') is small. We propose estimators of both the firm effects and the inefficiencies, which have small sample gains compared to the traditional FE estimator. The estimators are based on nonparametric kernel regression of unordered variables, which includes the FE estimator as a special case. In terms of global conditional MSE ('mean square error') criterions, it is proved that there are kernel estimators which are efficient to the FE estimators of firm effects and inefficiencies, in finite samples. Monte Carlo simulations supports our theoretical findings and in an empirical example it is shown how the traditional FE estimator and the proposed kernel FE estimator lead to very different conclusions about inefficiency of Indonesian rice farmers.

Outdoor performance of forest seedlings pre-cultivated under artificial lights : effects of the light spectra used for pre-cultivation on the future establishment and development

Forest nurseries are essential for producing good quality seedlings, thus being a key element in the reforestation process. With increasing climate change awareness, nursery managers are looking for new tools that can help reduce the effects of their operations on the environment. The ZEPHYR project, funded by the European Commission under the Seventh Framework Programme (FP7), has the objective of finding new alternatives for nurseries by developing innovative zero-impact technologies for forest plant production. Due to their direct relationship to the energy consumption of the nurseries, one of the main elements addressed are the grow lights used for the pre-cultivation. New LED luminaires with a light spectrum tailored to the seedlings’ needs are being studied and compared against the traditional fluorescent lamps. Seedlings of Picea abies and Pinus sylvestris were grown under five different light spectra (one fluorescent and 4 LED) during 5 weeks with a photoperiod of 16 hours at 100 μmol∙m-2∙s-1 and 60% humidity. In order to evaluate if these seedlings were able cope with real field stress conditions, a forest field trial was also designed. The terrain chosen was a typical planting site in mid-Sweden after clear-cutting. Two vegetation periods after the outplanting, the seedlings that were pre-cultivated under the LED lamps have performed at least as well as those that were grown under fluorescent lights. These results show that there is a good  potential for lightning substitution in forestry nurseries.

The Role of Motivational Strategies in the Upper Elementary Classroom : A systematic literature review about teacher strategies that promote self-confidence, motivation and a conducive learning environment

The aim of this literature review is to investigate which strategies teachers use to motivate pupils to communicate orally in English. The literature review also investigates how these teacher strategies affect pupils. The methodology used for this investigation is a systematic literature review. Various databases have been used when searching for literature. Scientific articles and theses have been searched for. They have also been read and analyzed before they have become a part of this review. The results indicate that some teachers feel insecure when speaking English. Therefore Swedish is spoken in many language classrooms. Teachers speaking in front of the class is the traditional way of teaching, and it does not seem to be a strategy who influences pupils positively. If teachers speak the target language among pupils they often get more motivated and focused pupils who feel comfortable speaking English. Young pupils are fast learners. By exposing them to the English language in early ages they receive great opportunities to learn a foreign language and strengthen their self-confidence. Drama, songs and rhymes are preferable strategies to use when teaching young learners. What position teachers decide to take in the classroom is also a significant element when teaching foreign languages.

Estimating quality costs in an automotive stamping plant through the use of simulation

The pressures of modern manufacturing require that the quality-cost benefits are determined when evaluating new procedures or alternative operating policies. Traditionally, cost reports and other quality metrics have been used for this purpose. However, the interactions between the main quality cost drivers cannot be understood at the superficial level and the effect that a new process or an alternative operating policy may have on quality costs is difficult to determine. An alternative to the traditional costing methods is simulation. The current work uses simulation to evaluate quality costs in an automotive stamping plant where the quality control is determined by operator inspection of their own work. Self-inspection quality control provides instantaneous feedback of quality problems, allowing for quick rectification. However, the difficult nature of surface finish inspection of automotive panels can create inspection and control errors. A simulation model was developed to investigate the cost effects of inspection and control errors and it was found that inspection error had a significant effect in increasing total quality cost, with the magnitude of this increase dependent on the level of control. Further, the simulation found that the lowest cost quality control policy was that which allowed a number of defective panels to accumulate before resetting the press-line.

Stakeholder representation on the boards of Australian initial public offerings

This paper analyses the board composition of Australian initial public offerings (IPOs) over the period 1994 to 1997. The recent management literature identifies a wide range of stakeholders beyond the traditional shareholders. Evan and Freeman, and Jones and Goldberg suggest that the importance of stakeholders should be reflected in board representation. Luoma and Goodstein provide evidence of increased stakeholder representation on the boards of American companies. This paper studies Australian IPOs and finds that this is not the case. This suggests that capital raising by new lists in the Australian equity market does not require stakeholder representation on the board.

Faster, richer, better: rapid appraisal techniques for the study of IS implementation in virtual communities

A major issue in Information Systems (IS) research is how to combine relevance and rigor (Benbasat and Zmud, 1999) and reduce the widening gap between research results and adoption (Dunn, 1994). Qualitative researchers make use of interpretivist methods to add richness and depth to their understanding of user problems. Interpretivist methods applied to IS implementations can thus result in research which communicates those findings more effectively. However standard interpretivist data-collection and analysis methods can be time-consuming and expensive. Findings based on these methods may be irrelevant to practitioners by the time they reach publication stage. A potential solution to this problem lies in Rapid Appraisal or RA, a qualitative appraisal methodology derived from rural development-related research. It offers IS researchers an additional technique for learning and acquiring relevant information in a limited period of time that  supplements current data collection and analysis techniques. RA adds value to the traditional approach for studying diffusion of innovation, supporting and extending the IS researcher’s qualitative ‘tool-kit’. In this paper we review an electronic gateway designed to facilitate the diffusion of an Australian government to business [G2B] export documentation system, EXDOC, which was first implemented with meat producers. RA techniques were used to collect and analyse data regarding the implementation of the first regional Electronic Trade Facilitation Center [ETFC] successfully established for Australian exporters in the horticulture sector. The findings from the original EXDOC implementation in the meat sector were confirmed and extended through this study. These include the importance of developing a governance structure that ensures all community members share the benefits of an implementation and the fact that virtual trading communities are attractive to users only if they add value to their business and extend standard ways of operating. Interactive interviews, part of the RA approach; also enabled us to expand our understanding of the way in which procedures developed in the course of implementing an electronic market represent value-adding opportunities for virtual trading communities. The paper has special relevance for researchers investigating adoption and diffusion issues experienced by small-scale producers with low exposure to technology in remote and rural settings.