Role of juvenile hormone in the synthesis and sequestration of vitellogenins in the red cotton stainer, Dysdercus koenigii (Heteroptera : Pyrrhocoridae)

Investigations were carried out to determine the role of juvenile hormone (JH) and 20-hydroxy ecdysone in the synthesis and uptake of vitellogenins, which were earlier identified, purified and characterised, in Dysdercus koenigii. The concentration(s) of vitellogenin(s) in fat body, haemolymph and that of vitellin(s) in ovary were significantly lower after chemical allatectomy at eclosion. In addition, at 70 h after emergence, chemical allatectomy reduced ovarian vitellin concentration, but vitellogenin levels remained normal in the fat body and haemolymph. The haemolymph vitellogenins were not incorporated into oocytes in such insects. Administration of JH-III at 20 h after allatectomy restored vitellogenin levels in the fat body and haemolymph, but the ovary failed to incorporate the available vitellogenins from haemolymph in such insects. However, when JH-III was administered twice, one at 20 h and then at 70 h after allatectomy, vitellogenin concentrations in fat body and haemolymph and also vitellin concentrations in ovary approached control levels. It is suggested that JH has two separate roles, one in vitellogenin synthesis and the other in uptake. 20-hydroxy ecdysone had no apparent role in either vitellogenin synthesis or uptake in D. koenigii. (C) 2000 Elsevier Science Inc. All rights reserved.

The effect of cooling rate on the structure and properties of closed-cell aluminium foams

The application of different cooling rates as a strategy to enhance the structure of aluminium foams is studied. The potential to influence the level of morphological defects and cell size non-uniformities is investigated. AlSi6Cu4 alloy was foamed through the powder compact route and then solidified, applying three different cooling rates. Foam development was monitored in situ by means of X-ray radioscopy while foaming inside a closed mould. The macro-structure of the foams was analysed in terms of cell size distribution as determined by X-ray tomography. Compression tests were conducted to assess the mechanical performance of the foams and measured properties were correlated with structural features of the foams. Moreover, possible changes in the ductile brittle nature of deformation with cooling rate were analysed by studying the initial stages of deformation. We observed improvements in the cell size distributions, reduction in microporosity and grain size at higher cooling rates, which in turn led to a notable enhancement in compressive strength. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The Politics and Policies of Reproductive Agency

This study examines the politics and policies of reproductive agency through a redescription of three Finnish policy documents dealing with the declining birth rate: the Government report on the future 'Finland for people of all ages' (2004), Business and Policy Forum EVA report 'Condemned to Diminish?' (Tuomitut vähenemään?) (2003), and the Family Federation's 'Population Policy Program' (2004). The redescription is done with the help of the notion of reproductive agency, which draws on Drucilla Cornell's concepts of the imaginary domain and bodily integrity. The imaginary domain is the moral and psychic space people need in order to form their personality, which is created in constant identificatory processes. The aim of the processes is imaginary coherence. As the personality is embodied, forming one s imaginary coherence always includes attempts for bodily integrity, also entailing attempts to arrive at an understanding of one's procreative capacities. Besides Cornell, I draw on Judith Butler's thinking and comprehend gender performatively as doing, and in relation to that agency as part of the performative process of one's personality. Reproductive agency is understood in this study as the possibilities to live differently the hegemonic forms of procreative life. I deal with three redescriptive themes: the family, economics and gender. The family is a central element in that it is considered the main location of reproduction. With regard to reproductive agency, the documents include problematic conceptions of the family. It is defined as a heterosexual, monogamous, conjugal relationship, which affects reproductive agency in that these notions do not allow for different modes of family life. The second prominent aspect, economics, features on two levels: the macroeconomic level of GDP, employment and competitiveness, and the level of family policies and concern about family finances. Macroeconomic-level argumentation is problematic in the context of reproductive agency because it implies that procreation is a duty of citizens, and thus has effects on values attached to reproductive potential. On the other hand, family policies may advance reproductive agency in supporting families financially. However, such policies also define how the family is understood, thereby affecting reproductive agency. The third theme, gender, intersects with many issues in the policy documents. All three texts consider the roles of men and women differently: women are primarily responsible for the family, and both men's and women's reproductive agency is affected in that the roles in the procreative process are predefined. EVA and the Family Federation see women as the main target of population policies, and consider it legitimate to try to change women s reproductive decisions. Implicit in the notion of reproductive agency is the idea that it should be possible to overcome and live differently the sex difference, but the three documents do not open up opportunities for that. The notion of reproductive agency makes it also possible to question the legitimacy of population policies in general and offers new perspectives on the vocabularies used in the three policy texts, providing insights into the values and logics that support the concepts.

Effect of √-irradiation on the structure and dynamics of domains in triglycine selenate

A comparative study of the switching properties of pure and √-irradiated TGSe crystals has been carried out to see the effect of irradiation on the structure and dynamics of domains. The switching behaviour of √-irradiated TGSe has been found to be qualitatively similar to that of unirradiated crystal and this has been interpreted in terms of structural inhibition caused by the formation of radiolysis products as well as the difference between the domain structures of the unirradiated and irradiated samples. Confirmation of this has been obtained by studying the domain patterns using the etch method.

Branding: The Past, Present, and Future: A Study of the Evolution and Future of Branding

Branding, as any other concept, has evolved over time: from the days when sheep of one herd started to be branded to distinguish them from another herd to the current era when everything, from water and flowers to clothes and food, is branded. Throughout these times, there have been numerous theories to describe and understand the underlying nuances. This paper finds the relationships in previous literature and reveals how these theories see branding from various perspectives and how they can be integrated to form a coherent view. It is also discussed how branding and society affect each other. Based on the knowledge of how branding theories have been developed as dependent variables of each other and the society, we are able to form a better understanding of the past, the present, and the future of branding.

Effect of trimethylammonium perchlorate on the decomposition and combustion of potassium perchlorate and potassium perchlorate-polyurethane propellants

Addition of trimethylammonium perchlorate to potassium perchlorate (KP) catalyzes its thermal decomposition. However, although the additive sensitises KP-PU propellant decomposition, its combustion is desensitised. The observed effects have been explained in terms of the role played by the early formation of potassium chloride.

The Mechanics and Statistics of Active Matter

Active particles contain internal degrees of freedom with the ability to take in and dissipate energy and, in the process, execute systematic movement. Examples include all living organisms and their motile constituents such as molecular motors. This article reviews recent progress in applying the principles of nonequilibrium statistical mechanics and hydrodynamics to form a systematic theory of the behavior of collections of active particles-active matter-with only minimal regard to microscopic details. A unified view of the many kinds of active matter is presented, encompassing not only living systems but inanimate analogs. Theory and experiment are discussed side by side.

Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

The status and use of tree biomass in a semi-arid village ecosystem

The status of the tree biomass resource was investigated in Ungra, a semi-arid village ecosystem in South India. There were 57 tree species with 12 trees capita−1 and 35 trees ha−1. Multiple benefit yielding local tree species dominated the village ecosystem, while fuel only or single end use trees accounted for a small proportion of trees. The standing tree biomass is adequate to meet the requirement of biomass fuels for cooking only for about two years. Village tree biomass is presently being depleted largely for export to urban areas. Tree regeneration is now characterized by transformation from multiple-use local tree species to a few single-use species. A large potential exists for tree biomass production along field boundaries (bunds), stream banks and roadsides. Biomass estimation equations were developed for 10 species.

Towards Explaining the Tasks and Roles of the Boards of Directors

While previous research has helped to improve our understanding of corporate governance and boards of directors, less is known about the factors that affect boards’ tasks and roles and directors’ motivation and engagement. This requires knowledge of how board decisions are being made and the internal and external factors that affect the decision-making process. Large inferential leaps have been made from board demographics to firm performance with equivocal results. This thesis concentrates on how the institutional, behavioral and social identification factors impact the enactment of board roles and tasks. Data used in this thesis were collected in 2009 through a mailed survey to Finnish large and middle-sized corporations. The findings suggest that firstly, the national context of an organization is reflected in board roles and shapes how and for what reasons the board roles are carried out; secondly, the directors’ human and external social capital invariably impacts their engagement in board tasks and that conflicts among directors moderate those relationships; finally, directors’ identification with the organization, its shareholders and its customers affect the directors’ involvement in board tasks. By addressing the impact of organisational context, board-internal behaviour and social identification of board members on board roles and tasks, this thesis firstly complements the shareholder supremacy view as the only reason for the board’s involvement with specific tasks; secondly questions the existence of the board as separate from its institutional context; and thirdly questions the view that a board is a ‘black box’, subject to a selection of input demographic variables and producing quantifiable results. The thesis demonstrates that boards are complex organisational bodies, which involve much interaction among board members. Director behaviour and its influence on board decision making is an important determinant of board tasks and boards are likely subjected to inter-group tensions and are susceptible to the influence of internal and external social forces.

Advances in the analysis and design of concrete structures, metal containments and liner plate for extreme loads

The material presented in this paper summarizes the progress that has been made in the analysis, design, and testing of concrete structures. The material is summarized in the following documents: 1. Part I - Containment Design Criteria and Loading Combinations - J.D. Stevenson (Stevenson and Associates, Cleveland, Ohio, USA) 2. Part II - Reinforced and Prestressed Concrete Behavior - J. Eibl and M. Curbach (Karlsruhe University, Karlsruhe, Germany) 3. Part III - Concrete Containment Analysis, Design and Related Testing - T.E. Johnson and M.A. Daye (Bechtel Power Corporation, Gaithersburg, Maryland USA) 4. Part IV - Impact and Impulse Loading and Response Prediction - J.D. Riera (School of Engineering - UFRGS, Porto Alegre, RS, Brazil) 5. Part V - Metal Containments and Liner Plate Systems - N.J. Krutzik (Siemens AG, Offenbach Am Main, Germany) 6. Part VI - Prestressed Reactor Vessel Design, Testing and Analysis - J. Nemet (Austrian Research Center, Seibersdorf, Austria) and K.T.S. Iyengar (Indian Institute of Science, Bangalore, India).

Structural requirements for the induction and inhibition of 2,3-dihydroxybenzoic acid decarboxylase ofAspergillus niger

2,3-Dihydroxybenzoic acid decarboxylase inAspergillus niger was induced by many substrate analogs including salicylate and gentisate. Catechol, which is the product, induced the enzyme tenfold. The purified enzyme was competitively inhibited by manyortho substituted benzoic acids. The Ki values for salicylate,o-fluoro ando-chloro benzoic acids were 0.12 mM, 0.12 mM, and 0.13 mM respectively; these values were lower than the Km value for the substrate. As the size of the group in theortho position increased, as in the case of bromo- and iodo-derivatives, there was an increase in their Ki values. The C-2 hydroxyl group was essential both for the induction and for interaction with the enzyme. The C-3 hydroxyl group was not necessary for induction or inhibition, but it might be essential for the catalysis.