924 resultados para testing, test, verifica, validazione
Resumo:
The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic
Resumo:
This research investigated faking across test administration modes in an employment testing scenario. For the first time, phone administration was included. Participants (N = 91) were randomly allocated to testing mode (telephone, Internet, or pen-and-paper). Participants completed a personality measure under standard instructions and then under instructions to fake as an ideal police applicant. No significant difference in any faked personality domains as a function of administration mode was found. Effect sizes indicated that the influence of administration mode was small. Limitations and future directions are considered. Overall, results indicate that if an individual intends to fake on a self-report test in a vocational assessment scenario, the electronic administration mode in which the test is delivered may be unimportant.
Resumo:
In Brazil, human and canine visceral leishmaniasis (CVL) caused by Leishmania infantum has undergone urbanisation since 1980, constituting a public health problem, and serological tests are tools of choice for identifying infected dogs. Until recently, the Brazilian zoonoses control program recommended enzyme-linked immunosorbent assays (ELISA) and indirect immunofluorescence assays (IFA) as the screening and confirmatory methods, respectively, for the detection of canine infection. The purpose of this study was to estimate the accuracy of ELISA and IFA in parallel or serial combinations. The reference standard comprised the results of direct visualisation of parasites in histological sections, immunohistochemical test, or isolation of the parasite in culture. Samples from 98 cases and 1,327 noncases were included. Individually, both tests presented sensitivity of 91.8% and 90.8%, and specificity of 83.4 and 53.4%, for the ELISA and IFA, respectively. When tests were used in parallel combination, sensitivity attained 99.2%, while specificity dropped to 44.8%. When used in serial combination (ELISA followed by IFA), decreased sensitivity (83.3%) and increased specificity (92.5%) were observed. Serial testing approach improved specificity with moderate loss in sensitivity. This strategy could partially fulfill the needs of public health and dog owners for a more accurate diagnosis of CVL.
Resumo:
African American women account for a disproportionate burden of cervical cancer incidence and mortality rate when compared to non-Hispanic White women. Cervical cancer is one of the most preventable types of cancer, and women can be screened for it with a routine Pap test. Given that religion occupies an essential place in African American lives, framing health messages with important spiritual themes and delivering them through a popular communication delivery channel may allow for a more culturally-relevant and accessible technology-based approach to promoting cervical cancer educational content to African American women. Using community-engaged research as a framework, the purpose of this multiple methods study was to develop, pilot test, and evaluate the feasibility, acceptability, and initial efficacy of a spiritually-based SMS text messaging intervention to increase cervical cancer awareness and Pap test screening intention among African American women. The study recruited church-attending African American women ages 21-65 and was conducted in three phases. Phases 1 and 2 consisted of a series of focus group discussions (n=15), cognitive response interviews (n=8), and initial usability testing that were conducted to inform the intervention development and modifications. Phase 3 utilized a non-experimental one-group pretest-posttest design to pilot test the 16-day text messaging intervention (n=52). Of the individuals enrolled, forty-six completed the posttest (retention rate=88%). Findings provided evidence for the early feasibility, high acceptability, and some initial efficacy of the CervixCheck intervention. There were significant pre-post increases observed for knowledge about cervical cancer and the Pap test (p = .001) and subjective norms (p = .006). Additionally, results post-intervention revealed that 83% of participants reported being either “satisfied” or “very satisfied” with the program and 85% found the text messages either “useful” or “very useful”. 85% of the participants also indicated that they would “likely” or “very likely” share the information they learned from the intervention with the women around them, with 39% indicating that they had already shared some of the information they received with others they knew. A spiritually-based SMS text messaging intervention could be a culturally appropriate and cost-effective method of promoting cervical cancer early detection information to African American women.
Resumo:
Doutoramento em Economia
Resumo:
The literature on the determination of flammability limits was reviewed and experts on the ASTM E681 standard were interviewed to identify new means of improving the reproducibility of the ASTM E681 test. Venting was identified as a variable of flammability limits not yet addressed. Limitations of the current system for sealing and venting (a rubber stopper) were identified and addressed by the development of a custom burst disc. The burst disc was evaluated for its ability to hold and maintain a vacuum, its ability to vent at pressures of interest, and for its venting phenomena. The burst disc was deemed to be a satisfactory alternative to the rubber stopper and is recommended to be included in the ASTM E681 standard.
Resumo:
Mestrado em Finanças
Resumo:
Dissertação de Mestrado Integrado em Medicina Veterinária
Resumo:
Generating sample models for testing a model transformation is no easy task. This paper explores the use of classifying terms and stratified sampling for developing richer test cases for model transformations. Classifying terms are used to define the equivalence classes that characterize the relevant subgroups for the test cases. From each equivalence class of object models, several representative models are chosen depending on the required sample size. We compare our results with test suites developed using random sampling, and conclude that by using an ordered and stratified approach the coverage and effectiveness of the test suite can be significantly improved.