Simple laccase-based biosensor for formetanate hydrochloride quantification in fruits

This work describes the development of an electrochemical enzymatic biosensor for quantification of the pesticide formetanate hydrochloride (FMT). It is based on a gold electrode modified with electrodeposited gold nanoparticles and laccase. The principle behind its development relies on FMT's capacity to inhibit the laccase catalytic reaction that occurs in the presence of phenolic substrates. The optimum values for the relevant experimental variables such as gold nanoparticles electrochemical deposition (at − 0.2 V for 100 s), laccase immobilization (via glutaraldehyde cross-linking), laccase concentration (12.4 mg/mL), substrate selection and concentration (5.83×10−5 M of aminophenol), pH (5.0), buffer (Britton–Robinson), and square-wave voltammetric parameters were determined. The developed biosensor was successfully applied to FMT determination in mango and grapes. The attained limit of detection was 9.5×10−8 ± 9.5×10−10 M (0.02 ± 2.6×10−4 mg/kg on a fresh fruit weight basis). Recoveries for the five tested spiking levels ranged from 95.5 ± 2.9 (grapes) to 108.6 ± 2.5% (mango). The results indicated that the proposed device presents suitable characteristics in terms of sensitivity (20.58 ± 0.49 A/μM), linearity (9.43×10−7 to 1.13×10−5 M), accuracy, repeatability (RSD of 1.4%), reproducibility (RSD of 1.8%) and stability (19 days) for testing of compliance with established maximum residue limits of FMT in fruits and vegetables.

Non-enzymatic assay for glucose by using immobilized whole-cells of E. coli containing glucose binding protein fused to fluorescent proteins

Glucose monitoring in vivo is a crucial issue for gaining new understanding of diabetes. Glucose binding protein (GBP) fused to two fluorescent indicator proteins (FLIP) was used in the present study such as FLIP-glu- 3.2 mM. Recombinant Escherichia coli whole-cells containing genetically encoded nanosensors as well as cell-free extracts were immobilized either on inner epidermis of onion bulb scale or on 96-well microtiter plates in the presence of glutaraldehyde. Glucose monitoring was carried out by Förster Resonance Energy Transfer (FRET) analysis due the cyano and yellow fluorescent proteins (ECFP and EYFP) immobilized in both these supports. The recovery of these immobilized FLIP nanosensors compared with the free whole-cells and cell-free extract was in the range of 50–90%. Moreover, the data revealed that these FLIP nanosensors can be immobilized in such solid supports with retention of their biological activity. Glucose assay was devised by FRET analysis by using these nanosensors in real samples which detected glucose in the linear range of 0–24 mM with a limit of detection of 0.11 mM glucose. On the other hand, storage and operational stability studies revealed that they are very stable and can be re-used several times (i.e. at least 20 times) without any significant loss of FRET signal. To author's knowledge, this is the first report on the use of such immobilization supports for whole-cells and cell-free extract containing FLIP nanosensor for glucose assay. On the other hand, this is a novel and cheap high throughput method for glucose assay.

Electrochemical immunosensor for the analysis of the breast cancer biomarker HER2 ECD

Human epidermal growth factor receptor 2 (HER2) is a breast cancer biomarker that plays a major role in promoting breast cancer cell proliferation and malignant growth. The extracellular domain (ECD) of HER2 can be shed into the blood stream and its concentration is measurable in the serum fraction of blood. In this work an electrochemical immunosensor for the analysis of HER2 ECD in human serum samples was developed. To achieve this goal a screen-printed carbon electrode, modified with gold nanoparticles, was used as transducer surface. A sandwich immunoassay, using two monoclonal antibodies, was employed and the detection of the antibody–antigen interaction was performed through the analysis of an enzymatic reaction product by linear sweep voltammetry. Using the optimized experimental conditions the calibration curve (ip vs. log[HER2 ECD]) was established between 15 and 100 ng/mL and a limit of detection (LOD) of 4.4 ng/mL was achieved. These results indicate that the developed immunosensor could be a promising tool in breast cancer diagnostics, patient follow-up and monitoring of metastatic breast cancer since it allows quantification in a useful concentration range and has an LOD below the established cut-off value (15 ng/mL).

Modelling the Contribution of 40K, 232Th and 226Ra to Radiation Dose and Risk from Airborne Discharges of Coal-Fired Power Plants

Coal contains trace elements and naturally occurring radionuclides such as 40K, 232Th, 238U. When coal is burned, minerals, including most of the radionuclides, do not burn and concentrate in the ash several times in comparison with their content in coal. Usually, a small fraction of the fly ash produced (2-5%) is released into the atmosphere. The activities released depend on many factors (concentration in coal, ash content and inorganic matter of the coal, combustion temperature, ratio between bottom and fly ash, filtering system). Therefore, marked differences should be expected between the by-products produced and the amount of activity discharged (per unit of energy produced) from different coal-fired power plants. In fact, the effects of these releases on the environment due to ground deposition have been received some attention but the results from these studies are not unanimous and cannot be understood as a generic conclusion for all coal-fired power plants. In this study, the dispersion modelling of natural radionuclides was carried out to assess the impact of continuous atmospheric releases from a selected coal plant. The natural radioactivity of the coal and the fly ash were measured and the dispersion was modelled by a Gaussian plume estimating the activity concentration at different heights up to a distance of 20 km in several wind directions. External and internal doses (inhalation and ingestion) and the resulting risk were calculated for the population living within 20 km from the coal plant. In average, the effective dose is lower than the ICRP’s limit and the risk is lower than the U.S. EPA’s limit. Therefore, in this situation, the considered exposure does not pose any risk. However, when considering the dispersion in the prevailing wind direction, these values are significant due to an increase of 232Th and 226Ra concentrations in 75% and 44%, respectively.

Large-area homogeneous periodic surface structures generated on the surface sputtered boron carbide thin films by femtosecond laser processing

Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm2. Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under different circumstances. Processing of the amorphous films at low fluence (72 μJ) results in LIPSS formation only on localized spots on the film surface. LIPSS formation was also observed on the top of the undulations formed after laser processing with 78 μJ of the amorphous film deposited at 800 °C. Finally, large-area homogeneous LIPSS coverage of the boron carbide crystalline films surface was achieved within a large range of laser fluences although holes are also formed at higher laser fluences.

Saúde mental, qualidade de vida e acesso aos cuidados de saúde na comunidade brasileira de Lisboa

Introdução: A utilização de serviços de saúde tem implicações importantes para o estado de saúde das populações. As políticas de imigração adoptadas nos países de destino têm influência no estado de saúde das comunidades imigrantes. Políticas que limitam o acesso de imigrantes aos cuidados de saúde aumentarão a vulnerabilidade e os riscos na saúde. Apesar da imigração promover uma série de rupturas na vida do sujeito, migrar, por si só, não pode ser considerado como factor de risco no âmbito da saúde e da saúde mental. O peso dos determinantes socioeconómicos tem ganho relevância no estudo das migrações, estado de saúde geral e mental. Isto porque, em geral, os imigrantes estão em situação mais precária do que a população autóctone. O estatuto socioeconómico baixo, as condições precárias de habitação e de trabalho, a falta de suporte social e a irregularidade jurídica são indicadores de risco acrescido para a saúde mental. Neste sentido é um desafio de monta os governos estabelecerem medidas sustentadas e, simultaneamente, integradoras dos imigrantes. Em Portugal, considera-se que há escassez de estudos relacionados com a área das migrações e da saúde.Metodologia: Estudo exploratório, descritivo e transversal. A finalidade foi a de identificar o estado de saúde, saúde mental e qualidade de vida da comunidade brasileira residente em Lisboa e o seu acesso aos serviços de saúde. Este estudo teve como principais objectivos a caracterização sociodemográfica, a identificação de variáveis inerentes ao processo migratório, a identificação da auto-apreciação do estado de saúde, a caracterização do acesso aos cuidados de saúde, a identificação do grupo em provável sofrimento psicológico, a comparação entre os resultados dos imigrantes juridicamente regulares e irregulares e a comparação entre a população imigrante e a população portuguesa. Inicialmente, foi prevista a utilização da técnica de amostragem de propagação geométrica ou snowball, pois a amostra tornar-se-ia maior à medida que os próprios inquiridos identificam outros potenciais respondentes. Ao longo do estudo, a metodologia inicial mostrou-se insuficiente para estabelecer uma amostra mais representativa dos imigrantes juridicamente irregulares. Para este feito, foi utilizada a metodologia de amostragem por conveniência e o local escolhido para a recolha da amostra foi o Consulado do Brasil em Lisboa. O instrumento de recolha de dados empregue baseou-se no questionário utilizado no 4º Inquérito Nacional de Saúde. O MHI-5 (Mental Health Index 5) é um instrumento de saúde mental e é parte integrante do inquérito, sendo recomendado pela Organização Mundial de Saúde. Consta de cinco itens relativos à saúde mental e os resultados são classificados através de um indicador que mede a existência de provável sofrimento psicológico. Foram incluídos no estudo 213 brasileiros. De seguida, procedeu-se ao tratamento estatístico dos dados. Resultados: A população inquirida é jovem, a maior parte tem entre 18 e 44 anos. As mulheres representam mais de metade da amostra. A taxa de actividade é elevada e a taxa de desemprego é similar à nacional. A inserção laboral prioritária é nos segmentos pouco qualificados ou de semi-qualificação. Aproximadamente um terço dos inquiridos afirmou ser beneficiário do Sistema Nacional de Saúde. A autoapreciação do estado de saúde é classificada como bastante positiva, assim como a qualidade de vida. O provável sofrimento psicológico, definido no MHI-5 pelo ponto de corte no score 52, atinge 23,3% dos participantes. Os homens apresentam melhores resultados do que as mulheres. Além disso, para os valores mais baixos no MHI-5 foram encontradas relações com as longas jornadas de trabalho e o diagnóstico de doença crónica.Discussão: O presente estudo apresenta limitações em relação à dimensão da amostra e à provável existência de enviesamento pela ausência de aleatorização. Apesar da legislação portuguesa garantir o acesso aos serviços de saúde e garantir a equidade no caso dos imigrantes que fazem descontos para a Segurança Social, apenas um terço referiu ser beneficiário do Sistema Nacional de Saúde. Este dado pode ser justificado por factores como o cumprimento da lei por alguns serviços e, também, pela falta de conhecimento da legislação e da forma de funcionamento do Serviço Nacional de Saúde por parte dos imigrantes. O facto das mulheres representarem o maior grupo em provável sofrimento psicológico é consistente com a literatura. As hipóteses levantadas para explicar este resultado podem ser agrupadas em: artefactos metodológicos, causalidade biológica e determinação social. Em relação ao instrumento, é possível que o MHI-5 se comporte de forma diferente no que diz respeito ao género.-------------------------------------------Introduction: The utilization of health services has important implications for the health state of the populations. The immigration policies adopted in the destiny countries are going to influence the health state of immigrant communities. Policies that limit the access of immigrants to health care are going to increase the vulnerability and the risk factor in health. Although immigration promotes several disruptive actions in ones life, migrating, on its own, cannot be considered as a risk factor for health and mental health. The preponderance of the socioeconomic factors has gained relevance in the study of migrations and also in the study of general health state and mental health. This happens because, in general, immigrants are in a more unfavorable situation compared with the destiny country population. The low socioeconomic status, the poor working and housing conditions, the lack of social support and the juridical irregularity are indicators of the incremented risk to mental health. Therefore, it is a major challenge for governments to find sustainable, and simultaneously, integrative measures for the immigrants. The studies related with the migrations and health in Portugal were considered to be few.Methods: It is an exploratory, descriptive and transversal study. The purpose is to identify the health state, mental health, quality of life and the access to health care of the Brazilian community resident in Lisbon. In addition, this study has as main goals the sociodemographic characterization, the variables identification inherent to the migrating process, the identification of the self-appreciation of health state, the characterization of the access to health care, the identification of the group in probable psychological suffer, the comparison between the results of regular and irregular immigrants and the comparison between the immigrant population and the Portuguese population. Initially it was predicted the utilization of the geometric propagation or “snowball”, as sampling technique, because the sample becomes larger as one answerer identify other potential answering persons. Along with the study, the methodology has shown insufficient to establish a more representative sample of the irregular immigrants. For this latter case, it was used a convenient sample methodology and the place chosen for the sample gathering was the “Consulate of Brazil in Lisbon”. The instrument was based in the questionnaire used in the “4th National Health Inquiry”. The MHI-5 (Mental Health Index 5) is a mental health instrument which is part of the enquiry and it is recommended by the World Health Organization. There are five items related to mental health and the results are classified through an indicator which measures the existence of a probable psychological suffer. It were included 213 Brazilian in the study. After, the statistical treatment of the data took place.Results: The answering population is young and the majority is between the 18 and 44 years of age. The women represent more than one half of the sample. The activity rate is high and the unemployment rate is similar to the national one. The priority labor insertion is in the few qualified or of semi-qualification segments. Approximately, one third of the answering people has stated to be beneficiary of the National Health System. The self-appreciation of the health state as well as the quality of life are classified as fairly positive ones. The probable psychological suffer, as defined in the MHI-5 through the cut point in the score below or equal to 52, reaches 23,3% of the sample population. Men show the better results than women. Further, for the lower values of MHI-5 it was found a relation with the long work periods and chronic disease diagnostic. Discussion: The present study evidences limitations in relation to the sample dimension and in relation to the existence of biases due to the lack of randomness. Although the Portuguese legislation guarantees the access to health services and the equality in the cases of the immigrants that do their Social Security discounts, only one third has mentioned to be beneficiary of the National Health System. This can be justified by several facts such as the non-fulfillment of law by some national services or the lack of knowledge of the legislation or the functioning process of the National Health System. Women representing the bigger group in probable psychological suffer has been coherent with the literature review. The hypothesis set to explain this result might be grouped in: methodological artifacts, biologic cause and social determination. In relation to the instrument used, it may be that MHI-5 behaves in a different way in respect to gender.

Projeto de execução de um viaduto rodoviário em betão armado pré-esforçado

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil

Mantle beneath the Gibraltar Arc from receiver functions

P and S receiver functions (PRF and SRF) from 19 seismograph stations in the Gibraltar Arc and the Iberian Massif reveal new details of the regional deep structure. Within the high-velocity mantle body below southern Spain the 660-km discontinuity is depressed by at least 20 km. The Ps phase from the 410-km discontinuity is missing at most stations in the Gibraltar Arc. A thin (similar to 50 km) low-S-velocity layer atop the 410-km discontinuity is found under the Atlantic margin. At most stations the S410p phase in the SRFs arrives 1.0-2.5 s earlier than predicted by IASP91 model, but, for the propagation paths through the upper mantle below southern Spain, the arrivals of S410p are delayed by up to +1.5 s. The early arrivals can be explained by elevated Vp/Vs ratio in the upper mantle or by a depressed 410-km discontinuity. The positive residuals are indicative of a low (similar to 1.7 versus similar to 1.8 in IASP91) Vp/Vs ratio. Previously, the low ratio was found in depleted lithosphere of Precambrian cratons. From simultaneous inversion of the PRFs and SRFs we recognize two types of the mantle: 'continental' and 'oceanic'. In the 'continental' upper mantle the S-wave velocity in the high-velocity lid is 4.4-4.5 km s(-1), the S-velocity contrast between the lid and the underlying mantle is often near the limit of resolution (0.1 km s(-1)), and the bottom of the lid is at a depth reaching 90 100 km. In the 'oceanic' domain, the S-wave velocities in the lid and the underlying mantle are typically 4.2-4.3 and similar to 4.0 km s(-1), respectively. The bottom of the lid is at a shallow depth (around 50 km), and at some locations the lid is replaced by a low S-wave velocity layer. The narrow S-N-oriented band of earthquakes at depths from 70 to 120 km in the Alboran Sea is in the 'continental' domain, near the boundary between the 'continental' and 'oceanic' domains, and the intermediate seismicity may be an effect of ongoing destruction of the continental lithosphere.

Ambient noise tomography of the East African Rift in Mozambique

Seismic ambient noise tomography is applied to central and southern Mozambique, located in the tip of the East African Rift (EAR). The deployment of MOZART seismic network, with a total of 30 broad-band stations continuously recording for 26 months, allowed us to carry out the first tomographic study of the crust under this region, which until now remained largely unexplored at this scale. From cross-correlations extracted from coherent noise we obtained Rayleigh wave group velocity dispersion curves for the period range 5–40 s. These dispersion relations were inverted to produce group velocity maps, and 1-D shear wave velocity profiles at selected points. High group velocities are observed at all periods on the eastern edge of the Kaapvaal and Zimbabwe cratons, in agreement with the findings of previous studies. Further east, a pronounced slow anomaly is observed in central and southern Mozambique, where the rifting between southern Africa and Antarctica created a passive margin in the Mesozoic, and further rifting is currently happening as a result of the southward propagation of the EAR. In this study, we also addressed the question concerning the nature of the crust (continental versus oceanic) in the Mozambique Coastal Plains (MCP), still in debate. Our data do not support previous suggestions that the MCP are floored by oceanic crust since a shallow Moho could not be detected, and we discuss an alternative explanation for its ocean-like magnetic signature. Our velocity maps suggest that the crystalline basement of the Zimbabwe craton may extend further east well into Mozambique underneath the sediment cover, contrary to what is usually assumed, while further south the Kaapval craton passes into slow rifted crust at the Lebombo monocline as expected. The sharp passage from fast crust to slow crust on the northern part of the study area coincides with the seismically active NNE-SSW Urema rift, while further south the Mazenga graben adopts an N-S direction parallel to the eastern limit of the Kaapvaal craton. We conclude that these two extensional structures herald the southward continuation of the EAR, and infer a structural control of the transition between the two types of crust on the ongoing deformation.

What is the shape of an air bubble on a liquid surface?

We have calculated the equilibrium shape of the axially symmetric meniscus along which a spherical bubble contacts a flat liquid surface by analytically integrating the Young-Laplace equation in the presence of gravity, in the limit of large Bond numbers. This method has the advantage that it provides semianalytical expressions for key geometrical properties of the bubble in terms of the Bond number. Results are in good overall agreement with experimental data and are consistent with fully numerical (Surface Evolver) calculations. In particular, we are able to describe how the bubble shape changes from hemispherical, with a flat, shallow bottom, to lenticular, with a deeper, curved bottom, as the Bond number is decreased.

Sustainability and economic evaluation of microalgae grown in brewery wastewater

This article evaluates the sustainability and economic potential of microalgae grown in brewery wastewater for biodiesel and biomass production. Three sustainability and two economic indicators were considered in the evaluation within a life cycle perspective. For the production system the most efficient process units were selected. Results show that harvesting and oil separation are the main process bottlenecks. Microalgae with higher lipid content and productivity are desirable for biodiesel production, although comparable to other biofuel’s feedstock concerning sustainability. However, improvements are still needed to reach the performance level of fossil diesel. Profitability reaches a limit for larger cultivation areas, being higher when extracted biomass is sold together with microalgae oil, in which case the influence of lipid content and areal productivity is smaller. The values of oil and/or biomass prices calculated to ensure that the process is economically sound are still very high compared with other fuel options, especially biodiesel.

O projeto de literacia da informação numa biblioteca da saúde: o caso da Biblioteca da ESTeSL

Introdução – Ao aumento exponencial de informação, sobretudo a científica, não corresponde obrigatoriamente a melhoria de qualidade na pesquisa e no uso da mesma. O conceito de literacia da informação ganha pertinência e destaque, na medida em que abarca competências que permitem reconhecer quando é necessária a informação e de atuar de forma eficiente e efetiva na sua obtenção e utilização. A biblioteca académica assume, neste contexto, o papel de parceiro privilegiado, preparando o momento em que o estudante se sente capaz de produzir e registar novo conhecimento através da escrita. Objectivo – A Biblioteca da ESTeSL reestruturou as sessões desenvolvidas desde o ano lectivo 2002/2003 e deu início a um projecto mais formal denominado «Saber usar a informação de forma eficiente e eficaz». Objectivos: a) promover a melhoria da qualidade dos trabalhos académicos e científicos; b) contribuir para a diminuição do risco de plágio; c) aumentar a confiança dos estudantes nas suas capacidades de utilização dos recursos de informação; d) incentivar uma participação mais ativa em sala de aulas; e) colaborar para a integração dos conteúdos pedagógicos e das várias fontes de informação. Método – Dinamizaram-se várias sessões de formação de curta duração, versando diferentes temas associados à literacia de informação, designadamente: 1) Pesquisa de informação com sessões dedicadas à MEDLINE, RCAAP, SciELO, B-ON e Scopus; 2) Factor de impacto das revistas científicas: Journal Citation Reports e SciMAGO; 3) Como fazer um resumo científico?; 4) Como estruturar o trabalho científico?; 5) Como fazer uma apresentação oral?; 6) Como evitar o plágio?; 7) Referenciação bibliográfica usando a norma de Vancouver; 8) Utilização de gestores de referências bibliográficas: ZOTERO (primeira abordagem para os estudantes de 1º ano de licenciatura) e a gestão de referências e rede académica de informação com o MENDELEY (direcionado para estudantes finalistas, mestrandos, docentes e investigadores). O projecto foi apresentado à comunidade académica no site da ESTeSL; cada sessão foi divulgada individualmente no site e por email. Em 2015, a divulgação investiu na nova página da Biblioteca (https://estesl.biblio.ipl.pt/), que alojava informações e recursos abordados nas formações. As inscrições eram feitas por email, sem custos associados ou limite mínimo ou máximo de sessões para participar. Resultados – Em 2014 registaram-se 87 inscrições. Constatou-se a presença de, pelo menos, um participante em cada sessão de formação. Em 2015, o total de inscrições foi de 190. Foram reagendadas novas sessões a pedido dos estudantes cujos horários não eram compatíveis com os inicialmente agendados. Foram então organizados dois dias de formação seguida (cerca de 4h em cada dia) com conteúdos selecionados pelos estudantes. Registou-se, nestas sessões, a presença contante de cerca de 30 estudantes em sala. No total, as sessões da literacia da informação contaram com estudantes de licenciatura de todos os anos, estudantes de mestrado, docentes e investigadores (internos e externos à ESTeSL). Conclusões – Constata-se a necessidade de introdução de novos conteúdos no projeto de literacia da informação. O tempo, os conteúdos e o interesse demonstrado por aqueles que dele usufruíram evidenciam que este é um projeto que está a ganhar o seu espaço na comunidade da ESTeSL e que a literacia da informação contribui de forma efetiva para a construção e para a produção de conhecimento no meio académico.

Optimization of cruciform specimens for biaxial fatigue loading with direct multi search

In order to correctly assess the biaxial fatigue material properties one must experimentally test different load conditions and stress levels. With the rise of new in-plane biaxial fatigue testing machines, using smaller and more efficient electrical motors, instead of the conventional hydraulic machines, it is necessary to reduce the specimen size and to ensure that the specimen geometry is appropriate for the load capacity installed. At the present time there are no standard specimen's geometries and the indications on literature how to design an efficient test specimen are insufficient. The main goal of this paper is to present the methodology on how to obtain an optimal cruciform specimen geometry, with thickness reduction in the gauge area, appropriate for fatigue crack initiation, as a function of the base material sheet thickness used to build the specimen. The geometry is optimized for maximum stress using several parameters, ensuring that in the gauge area the stress distributions on the loading directions are uniform and maximum with two limit phase shift loading conditions (delta = 0 degrees and (delta = 180 degrees). Therefore the fatigue damage will always initiate on the center of the specimen, avoiding failure outside this region. Using the Renard Series of preferred numbers for the base material sheet thickness as a reference, the reaming geometry parameters are optimized using a derivative-free methodology, called direct multi search (DMS) method. The final optimal geometry as a function of the base material sheet thickness is proposed, as a guide line for cruciform specimens design, and as a possible contribution for a future standard on in-plane biaxial fatigue tests

Soliton-type and other travelling wave solutions for an improved class of nonlinear sixth-order Boussinesq equations

An improved class of nonlinear bidirectional Boussinesq equations of sixth order using a wave surface elevation formulation is derived. Exact travelling wave solutions for the proposed class of nonlinear evolution equations are deduced. A new exact travelling wave solution is found which is the uniform limit of a geometric series. The ratio of this series is proportional to a classical soliton-type solution of the form of the square of a hyperbolic secant function. This happens for some values of the wave propagation velocity. However, there are other values of this velocity which display this new type of soliton, but the classical soliton structure vanishes in some regions of the domain. Exact solutions of the form of the square of the classical soliton are also deduced. In some cases, we find that the ratio between the amplitude of this wave and the amplitude of the classical soliton is equal to 35/36. It is shown that different families of travelling wave solutions are associated with different values of the parameters introduced in the improved equations.

Is there space for senior civil servants hybrid management models across political- administrative systems?

Comunicação apresentada na 17.ª conferência anual da NISPACee, realizada de 14 a 16 de Maio de 2009.