Los problemas del tabaco: Gobierno, campesinos y mujeres en la década de 1930

Durante la década de 1930 el capitalismo industrial organizó diferentes espacios de la política y la cultura en Colombia. A través del estudio de caso de Coltabaco, se caracterizan tres momentos de los vínculos del capitalismo industrial con la sociedad colombiana. En el primer momento, se la describen los vínculos políticos que hicieron visible diferentes formas de participación política del sector industrial y su relación con las regiones, las instituciones (públicas y privadas) y las elites dominantes, así como se subraya la importancia del mercado interno para la industria del tabaco. En el segundo momento, se caracterizan los vínculos entre Coltabaco y el sector rural a partir de la labor pedagógica de Coltabaco para la producción de la hoja, así mismo, se describen las representaciones del cultivador vinculado a la industria que fueron difundidas en el sector rural; finalmente, los vínculos entre Coltabaco y el sector urbano se analizan en la tensión por la relación mujer-cigarrillo. En el consumo del cigarrillo, el placer femenino se desligó de condicionantes morales e higiénicos, ganando, a través del gusto, una nueva circunstancia para experimentar la subjetividad de la mujer moderna. Los Problemas del Tabaco no se limitaron exclusivamente al espacio de la política económica, también fueron las costumbres campesinas desvinculadas del ritmo de la industria, y las ideas morales e higiénicas que organizaban la costumbre en la relación mujer-cigarrillo.

Nous processos i formes de creixement urbà: el cas del districte industrial de Montebelluna a Itàlia

This article analyses the spatial organization of Montebelluna's industrial district (Italy) as an exemple of the dinamics of urbanization phenomenon in small urban areas. The study is divided in two parts: in the first one I present the social organisation's model of production named «industrial district» and its relation with the space, which is characterizeded by the rising of diffused urbanization settlements; in the second part I try to verify some explanatory factors pointed out by different autors in this specific area with an historical analysis of processes point of view. The diffused organisation of economic and housing activity show a change in the urban morphology

Desenvolupament de mètodes de predicció de soroll i anàlisi de l'impacte acústic produït pel trànsit viari i el ferrocarril en la ciutat de Girona

La feina feta en aquest treball de tesis s'ha desenvolupat a partir de tres objectius vertebradors, que fonamentalment són: ·El primer dels objectius d'aquest treball de tesis és presentar un recull dels factors que intervenen en l'acústica urbanística: soroll produït pels diferents vehicles, fórmules de predicció de soroll, geometria dels edificis... , tot estudiant els seus efectes en la ciutat de Girona. ·Un altre objectiu ha estat desenvolupar uns mètodes numèrics propis, contrastats experimentalment i extrapolables a qualsevol entorn urbanístic, que permetin predir els valors de les pertorbacions acústiques produïdes pels diferents vehicles en diferents situacions, entre els que es destaquen: -Fórmula de predicció del soroll en un entorn urbà i la seva aplicació a Girona. -Càlcul de l'increment de soroll en un carrer provocat per les reflexions de les ones sonores en les façanes dels edificis. -Estudi del nivell de soroll en la boca de la cavitat d'un túnel produït pel pas del ferrocarril. -Determinació del soroll provocat pel pas d'un tren sobre un viaducte. -Mètode de distribució i planificació del trànsit urbà per disminuir l'impacte acústic sobre la zona. ·El darrer objectiu consisteix en fer una descripció analítica de les principals fonts de soroll que afecten a la ciutat: el trànsit viari i el ferrocarril. Per realitzar aquests objectius s'ha disposat d'un banc de dades amb més de 2.000 mesures sonores de Girona (nivells equivalents de 10 minuts de durada). La metodologia seguida i els principis en que es fonamenta es detallen a l'inici de cada apartat. La finalitat de tots aquests estudis, no és altre que millorar el confort acústic, i la qualitat de vida, de les ciutats. Gairebé tots els grans nuclis de població del planeta es veuen afectats per una gravíssima problemàtica mediambiental, doncs a l'anomenada contaminació acústica cal afegir uns alts índexs de pol·lució atmosfèrica (altes concentracions de biòxid de carboni, generació d'illes de calor...). Aquesta situació, generalitzada arreu del planeta, ha propiciat l'aparició de mesures dràstiques consistents fonamentalment en restringir l'accés dels vehicles motoritzats als nuclis i zones centrals de les àrees urbanes. Precisament aquesta opció s'ha proposat per les zones interiors de Girona on l'elevada densitat de les edificacions deixa un escàs marge per plantejar la construcció de noves rutes o vies alternatives. Cal esmentar que tots els càlculs i teories que es desenvolupen en aquest treball de tesis reflecteixen la realitat acústica actual provocada pels diferents mitjans de transport. Molt possiblement, en un futur no massa llunyà, els nivells de soroll (dB) enregistrats en situacions de tràfic similar seran força menors. Són molts els factors que poden contribuir a aquesta disminució de la intensitat de les emissions sonores: reducció del fregament mecànic, augment del coeficient aerodinàmic, nous materials pels pneumàtics i l'asfalt ... Sense cap mena de dubte, però, una millora transcendental, i no només pel que fa al confort acústic sinó per l'ecosistema en general, seria potenciar la construcció de motors elèctrics o d'hidrogen. Aquests últims per exemple, a diferència dels motors de combustió, funcionen mitjançant piles de combustible que converteixen, amb molta netedat, el gas hidrogen en electricitat i possibiliten l'existència de vehicles no contaminants propulsats per motors elèctrics menys sorollosos. Així, al haver-hi menys fregament entre les parts mòbils del motor (no hi ha pistons ni cilindres) el soroll generat es reduiria considerablement.

Industrialização e Urbanização em Portugal: que relações? O caso do Anteplano de Urbanização da Vila do Barreiro de 1957

The main purpose of this paper is to focus discussion around the concept of “enterprise” as a reality which, together with other production units located in urban areas, could generate economies of agglomeration. These in turn play a role of enormous importance to local and regional level. By this route was thought to introduce a multidisciplinary approach in the debate about territory.

Plano de Pormenor das Antas : que contributo para a sustentabilidade urbana?

Esta dissertação analisa a importância do Plano de Pormenor das Antas, e a sua influência no desenvolvimento sustentável da cidade do Porto, nomeadamente na zona Este. Inicialmente o trabalho centra-se na compreensão do conceito de desenvolvimento sustentável, bem como na sua evolução e adaptabilidade ao planeamento urbano. Foram de seguida analisadas propostas de bairros sustentáveis que tiveram repercussões a nível europeu, e identificadas as principais medidas adoptadas, bem como os seus resultados e dificuldades de implementação. A análise do caso de estudo – Plano de Pormenor das Antas-, é feita a partir da metodologia criada por Miguel Amado no seu livro “Planeamento Urbano Sustentável” (2009), sendo que o enfoque é colocado no que o autor designa por “factores ambientais na concepção”. Seguindo o raciocínio inverso ao apresentado no livro, que visa sobretudo consciencializar para um método de planeamento sustentável, tentamos verificar a presença ou ausência destes elementos na execução da proposta. Estes factores foram agrupados por temática (componente natural, componente social e componente urbana) e abordados tendo em conta as condicionantes do local. Numa fase final da dissertação é feita uma síntese á analise efectuada, tendo como contexto a base teórica e os casos exemplares estudados, que se traduz em várias considerações e conclusões sobre o objectivo principal do trabalho. Este trabalho visa a necessidade da abordagem dos factores de desenvolvimento sustentável no acto do planeamento territorial, e propõe-se como um contributo para um melhor planeamento urbano.

Ecuador

Ecuador’s total population numbers some 15,682,792 inhabitants, and includes 14 nationalities accounting for around 1,100,000 people, all joined together in a series of local, regional and national organisations. 60.3% of the Andean Kichwa live in six provinces in the Central-North Mountains; 24.1% live in the Amazon region and belong to ten nationalities; 7.3% live in the Southern Mountains; and the remaining 8.3% live in the Coastal region and the Galapagos Islands. 78.5% still live in rural areas and 21.5% in urban areas. The current Constitution of the Republic recognises the country as a “…constitutional state of law and social justice, democratic, sovereign, independent, unitary, intercultural, multinational and secular”. Over the last five years, the country has undergone a series of political and institutional reforms. At the same time, however, enforcing and guaranteeing the collective rights recognised in the Constitution has become a challenge to the process, and a permanent point of disagreement between the government, headed by the economist Rafael Correa, and the indigenous social organisations. The government’s economic action has been largely marked by an opening up of the extractive industries - oil, copper and gold - to foreign investment, either of Chinese or Belarussian origin, or from other Latin American countries such as Brazil, Chile or Argentina. This has resulted in risk to and impacts on the territorial and cultural integrity of various indigenous peoples, and an uncertainty created around the true validity of the broad collective rights enshrined in the Constitution.

Understanding Demographic and Behavioral Mechanisms that Guide Responses of Neotropical Migratory Birds to Urbanization: a Simulation Approach

Although studies often report that densities of many forest birds are negatively related to urbanization, the mechanisms guiding this pattern are poorly understood. Our objective was to use a population simulation to examine the relative influence of six demographic and behavioral processes on patterns of avian abundance in urbanizing landscapes. We constructed an individual-based population simulation model representing the annual cycle of a Neotropical migratory songbird. Each simulation was performed under two landscape scenarios. The first scenario had similar proportions of high- and low-quality habitat across the urban to rural gradient. Under the first scenario, avian density was negatively related to urbanization only when rural habitats were perceived to be of higher quality than they actually were. The second landscape scenario had declining proportions of high-quality habitat as urbanization increased. Under the second scenario, each mechanism generated a negative relationship between density and urbanization. The strongest effect on density resulted when birds preferentially selected habitats in landscapes from which they fledged or were constrained from dispersing. The next strongest patterns occurred when birds directly evaluated habitat quality and accurately selected the highest-quality available territories. When birds selected habitats based on the presence of conspecifics, the density–urbanization relationship was only one-third the strength of other habitat selection mechanisms and only occurred under certain levels of population survival. Although differences in adult or nest survival in the face of random habitat selection still elicited reduced densities in urban landscapes, the relationships between urbanization and density were weaker than those produced by the conspecific attraction mechanism. Results from our study identify key predictions and areas for future research, including assessing habitat quality in urban and rural areas in order to determine if habitats in urban areas are underutilized.

A review of the potential impacts of climate change on surface water quality

It is now accepted that some human-induced climate change is unavoidable. Potential impacts on water supply have received much attention, but relatively little is known about the concomitant changes in water quality. Projected changes in air temperature and rainfall could affect river flows and, hence, the mobility and dilution of contaminants. Increased water temperatures will affect chemical reaction kinetics and, combined with deteriorations in quality, freshwater ecological status. With increased flows there will be changes in stream power and, hence, sediment loads with the potential to alter the morphology of rivers and the transfer of sediments to lakes, thereby impacting freshwater habitats in both lake and stream systems. This paper reviews such impacts through the lens of UK surface water quality. Widely accepted climate change scenarios suggest more frequent droughts in summer, as well as flash-flooding, leading to uncontrolled discharges from urban areas to receiving water courses and estuaries. Invasion by alien species is highly likely, as is migration of species within the UK adapting to changing temperatures and flow regimes. Lower flows, reduced velocities and, hence, higher water residence times in rivers and lakes will enhance the potential for toxic algal blooms and reduce dissolved oxygen levels. Upland streams could experience increased dissolved organic carbon and colour levels, requiring action at water treatment plants to prevent toxic by-products entering public water supplies. Storms that terminate drought periods will flush nutrients from urban and rural areas or generate acid pulses in acidified upland catchments. Policy responses to climate change, such as the growth of bio-fuels or emission controls, will further impact freshwater quality.

Referencing of street-level flows measured during the DAPPLE 2004 campaign

Street-level mean flow and turbulence govern the dispersion of gases away from their sources in urban areas. A suitable reference measurement in the driving flow above the urban canopy is needed to both understand and model complex street-level flow for pollutant dispersion or emergency response purposes. In vegetation canopies, a reference at mean canopy height is often used, but it is unclear whether this is suitable for urban canopies. This paper presents an evaluation of the quality of reference measurements at both roof-top (height = H) and at height z = 9H = 190 m, and their ability to explain mean and turbulent variations of street-level flow. Fast response wind data were measured at street canyon and reference sites during the six-week long DAPPLE project field campaign in spring 2004, in central London, UK, and an averaging time of 10 min was used to distinguish recirculation-type mean flow patterns from turbulence. Flow distortion at each reference site was assessed by considering turbulence intensity and streamline deflection. Then each reference was used as the dependent variable in the model of Dobre et al. (2005) which decomposes street-level flow into channelling and recirculating components. The high reference explained more of the variability of the mean flow. Coupling of turbulent kinetic energy was also stronger between street-level and the high reference flow rather than the roof-top. This coupling was weaker when overnight flow was stratified, and turbulence was suppressed at the high reference site. However, such events were rare (<1% of data) over the six-week long period. The potential usefulness of a centralised, high reference site in London was thus demonstrated with application to emergency response and air quality modelling.

Using remotely sensed data to support flood modelling

Recent severe flooding in the UK has highlighted the need for better information on flood risk, increasing the pressure on engineers to enhance the capabilities of computer models for flood prediction. This paper evaluates the benefits to be gained from the use of remotely sensed data to support flood modelling. The remotely sensed data available can be used either to produce high-resolution digital terrain models (DTMs) (light detection and ranging (Lidar) data), or to generate accurate inundation mapping of past flood events (airborne synthetic aperture radar (SAR) data and aerial photography). The paper reports on the modelling of real flood events that occurred at two UK sites on the rivers Severn and Ouse. At these sites a combination of remotely sensed data and recorded hydrographs was available. It is concluded first that light detection and ranging Lidar generated DTMs support the generation of considerably better models and enhance the visualisation of model results and second that flood outlines obtained from airborne SAR or aerial images help develop an appreciation of the hydraulic behaviour of important model components, and facilitate model validation. The need for further research is highlighted by a number of limitations, namely: the difficulties in obtaining an adequate representation of hydraulically important features such as embankment crests and walls; uncertainties in the validation data; and difficulties in extracting flood outlines from airborne SAR images in urban areas.

Evaluating a new LISFLOOD-FP formulation with data from the summer 2007 floods in Tewkesbury, UK

Two-dimensional flood inundation modelling is a widely used tool to aid flood risk management. In urban areas, where asset value and population density are greatest, the model spatial resolution required to represent flows through a typical street network (i.e. < 10m) often results in impractical computational cost at the whole city scale. Explicit diffusive storage cell models become very inefficient at such high resolutions, relative to shallow water models, because the stable time step in such schemes scales as a quadratic of resolution. This paper presents the calibration and evaluation of a recently developed new formulation of the LISFLOOD-FP model, where stability is controlled by the Courant–Freidrichs–Levy condition for the shallow water equations, such that, the stable time step instead scales linearly with resolution. The case study used is based on observations during the summer 2007 floods in Tewkesbury, UK. Aerial photography is available for model evaluation on three separate days from the 24th to the 31st of July. The model covered a 3.6 km by 2 km domain and was calibrated using gauge data from high flows during the previous month. The new formulation was benchmarked against the original version of the model at 20 m and 40 m resolutions, demonstrating equally accurate performance given the available validation data but at 67x faster computation time. The July event was then simulated at the 2 m resolution of the available airborne LiDAR DEM. This resulted in a significantly more accurate simulation of the drying dynamics compared to that simulated by the coarse resolution models, although estimates of peak inundation depth were similar.

Improving flood models using LiDAR: progress and problems

Airborne scanning laser altimetry (LiDAR) is an important new data source for river flood modelling. LiDAR can give dense and accurate DTMs of floodplains for use as model bathymetry. Spatial resolutions of 0.5m or less are possible, with a height accuracy of 0.15m. LiDAR gives a Digital Surface Model (DSM), so vegetation removal software (e.g. TERRASCAN) must be used to obtain a DTM. An example used to illustrate the current state of the art will be the LiDAR data provided by the EA, which has been processed by their in-house software to convert the raw data to a ground DTM and separate vegetation height map. Their method distinguishes trees from buildings on the basis of object size. EA data products include the DTM with or without buildings removed, a vegetation height map, a DTM with bridges removed, etc. Most vegetation removal software ignores short vegetation less than say 1m high. We have attempted to extend vegetation height measurement to short vegetation using local height texture. Typically most of a floodplain may be covered in such vegetation. The idea is to assign friction coefficients depending on local vegetation height, so that friction is spatially varying. This obviates the need to calibrate a global floodplain friction coefficient. It’s not clear at present if the method is useful, but it’s worth testing further. The LiDAR DTM is usually determined by looking for local minima in the raw data, then interpolating between these to form a space-filling height surface. This is a low pass filtering operation, in which objects of high spatial frequency such as buildings, river embankments and walls may be incorrectly classed as vegetation. The problem is particularly acute in urban areas. A solution may be to apply pattern recognition techniques to LiDAR height data fused with other data types such as LiDAR intensity or multispectral CASI data. We are attempting to use digital map data (Mastermap structured topography data) to help to distinguish buildings from trees, and roads from areas of short vegetation. The problems involved in doing this will be discussed. A related problem of how best to merge historic river cross-section data with a LiDAR DTM will also be considered. LiDAR data may also be used to help generate a finite element mesh. In rural area we have decomposed a floodplain mesh according to taller vegetation features such as hedges and trees, so that e.g. hedge elements can be assigned higher friction coefficients than those in adjacent fields. We are attempting to extend this approach to urban area, so that the mesh is decomposed in the vicinity of buildings, roads, etc as well as trees and hedges. A dominant points algorithm is used to identify points of high curvature on a building or road, which act as initial nodes in the meshing process. A difficulty is that the resulting mesh may contain a very large number of nodes. However, the mesh generated may be useful to allow a high resolution FE model to act as a benchmark for a more practical lower resolution model. A further problem discussed will be how best to exploit data redundancy due to the high resolution of the LiDAR compared to that of a typical flood model. Problems occur if features have dimensions smaller than the model cell size e.g. for a 5m-wide embankment within a raster grid model with 15m cell size, the maximum height of the embankment locally could be assigned to each cell covering the embankment. But how could a 5m-wide ditch be represented? Again, this redundancy has been exploited to improve wetting/drying algorithms using the sub-grid-scale LiDAR heights within finite elements at the waterline.

The social impacts of heat waves

The effects of the 2003 European heat wave have highlighted the need for society to prepare itself for and cope more effectively with heat waves. This is particularly important in the context of predicted climate change and the likelihood of more frequent extreme climate events; to date, heat as a natural hazard has been largely ignored. In order to develop better coping strategies, this report explores the factors that shape the social impacts of heat waves, and sets out a programme of research to address the considerable knowledge gaps in this area. Heat waves, or periods of anomalous warmth, do not affect everyone; it is the vulnerable individuals or sectors of society who will most experience their effects. The main factors of vulnerability are being elderly, living alone, having a pre-existing disease, being immobile or suffering from mental illness and being economically disadvantaged. The synergistic effects of such factors may prove fatal for some. Heat waves have discernible impacts on society including a rise in mortality, an increased strain on infrastructure (power, water and transport) and a possible rise in social disturbance. Wider impacts may include effects on the retail industry, ecosystem services and tourism. Adapting to more frequent heat waves should include soft engineering options and, where possible, avoid the widespread use of air conditioning which could prove unsustainable in energy terms. Strategies for coping with heat include changing the way in which urban areas are developed or re-developed, and setting up heat watch warning systems based around weather and seasonal climate forecasting and intervention strategies. Although heat waves have discernible effects on society, much remains unknown about their wider social impacts, diffuse health issues and how to manage them.

Young caregiving and HIV in the UK: caring relationships and mobilities in African migrant families

Recent research in Sub-Saharan Africa has revealed the importance of children’s caring roles in families affected by HIV and AIDS. However, few studies have explored young caregiving in the context of HIV in the UK, where recently arrived African migrant and refugee families are adversely affected by the global epidemic. This paper explores young people’s socio-spatial experiences of caring for a parent with HIV, based on qualitative research with 37 respondents in London and other urban areas in England. In-depth semi-structured interviews were conducted with young people with caring responsibilities and mothers with HIV, who were predominantly African migrants, as well as with service providers. Drawing on their perspectives, the paper discusses the ways that young people and mothers negotiate the boundaries of young people’s care work within and beyond homespace, according to norms of age, gender, generational relations and cultural constructions of childhood. Despite close attachments within the family, the emotional effects of living with a highly stigmatised life-limiting illness, pressures associated with insecure immigration status, transnational migration and low income undermined African mothers’ and young people’s sense of security and belonging to homespace. These factors also restricted their mobility and social participation in school/college and neighbourhood spaces. While young people and mothers valued supportive safe spaces within the community, the stigma surrounding HIV significantly affected their ability to seek support. The article identifies security, privacy, independence and social mobility as key dimensions of African young people’s and mothers’ imagined futures of ‘home’ and ‘family’.

The experiences and priorities of young people who care for their siblings in Tanzania and Uganda

This report presents key findings from a small-scale pilot research project that explored the experiences and priorities of young people caring for their siblings in sibling-headed households affected by AIDS in Tanzania and Uganda. Qualitative and participatory research was conducted with 33 young people living in sibling-headed households and 39 NGO staff and community members in rural and urban areas of Tanzania and Uganda. The report analyses the ways that young people manage transitions to caring for their younger siblings following their parents’ death and the impacts of caring on their family relations, education, emotional wellbeing and health, social lives and their transitions to adulthood. The study highlights gendered- and age-related differences in the nature and extent of young people’s care work and discusses young people’s needs and priorities for action, based on the views of young people, NGO staff and community members. Meeting the basic needs of young people living in sibling-headed households, listening to young people’s views, fostering peer support and relationships of trust with supportive adults, raising awareness and advocacy emerge as key priorities to safeguard the rights of children and young people living in sibling-headed households and challenge the stigma and marginalisation they sometimes face.