Laser diode bistability as sensor of optical signals pameters

Laser Diodes have been employed many times as light sources on different kinds of optical sensors. Their main function in these applications was the emission of an optical radiation impinging onto a certain object and, according to the characteristics of the reflected light, some information about this object was obtained. Laser diodes were acting, in a certain way, just as passive devices where their only function was to provide the adequate radiation to be later measured and analyzed. The objective of this paper is to report a new concept on the use of laser diodes taking into account their optical bistable properties. As it has been shown in several places, different laser diodes as, for example, DFB lasers and FP lasers, offer bistable characteristics being these characteristics a function of different parameters as wavelength, light polarization or temperature. Laser Bistability is strongly dependent on them and any small variation of above parameters gives rise to a strong change in the characteristics of its non-linear properties. These variations are analyzed and their application in sensing reported. The dependence on wavelength, spectral width, input power and phase variations, mainly for a Fabry-Perot Laser structure as basic configuration, is shown in this paper.

A reliable support tool for monitoring, testing and debugging wireless sensor cookie nodes

In this work a WSN Support Tool for developing, testing, monitoring and debugging new application prototypes in a reliable and robust way is proposed, by combining a Hardware -Software Integration Platform with the implementation of a parallel communication channel that helps users to interact to the experiments in runtime without interfering in the operation of the wireless network. As a pre-deployment tool, prototypes can be validated in a real environment before implementing them in the final application, aiming to increase the effectiveness and efficiency of the technology. This infrastructure is the support of CookieLab: a WSN testbed based on the Cookie Nodes Platform.

FPGA-Based Wireless Sensor Node Architecture for High Performance Applications

While for years traditional wireless sensor nodes have been based on ultra-low power microcontrollers with sufficient but limited computing power, the complexity and number of tasks of today’s applications are constantly increasing. Increasing the node duty cycle is not feasible in all cases, so in many cases more computing power is required. This extra computing power may be achieved by either more powerful microcontrollers, though more power consumption or, in general, any solution capable of accelerating task execution. At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall. In order to demonstrate this, an innovative WSN node architecture is proposed. This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved. Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

Network assisted content protection architectures for a connected world

Content protection is a key component for the success of a multimedia services platform, as proven by the plethora of solutions currently on the market. In this paper we analyze a new network scenario where permanent bidirectional connectivity and video-aware encryption technologies allow a trustful operation of ubiquitous end devices. We propose new scalable models for a content protection architecture that may achieve dramatic improvement in robustness, reliability, and scalability. Selective ciphering and countermeasures are included in those models, together with several examples of their application.

A novel topology control approach to maintain the node degree in dynamic wireless sensor networks

Topology control is an important technique to improve the connectivity and the reliability of Wireless Sensor Networks (WSNs) by means of adjusting the communication range of wireless sensor nodes. In this paper, a novel Fuzzy-logic Topology Control (FTC) is proposed to achieve any desired average node degree by adaptively changing communication range, thus improving the network connectivity, which is the main target of FTC. FTC is a fully localized control algorithm, and does not rely on location information of neighbors. Instead of designing membership functions and if-then rules for fuzzy-logic controller, FTC is constructed from the training data set to facilitate the design process. FTC is proved to be accurate, stable and has short settling time. In order to compare it with other representative localized algorithms (NONE, FLSS, k-Neighbor and LTRT), FTC is evaluated through extensive simulations. The simulation results show that: firstly, similar to k-Neighbor algorithm, FTC is the best to achieve the desired average node degree as node density varies; secondly, FTC is comparable to FLSS and k-Neighbor in terms of energy-efficiency, but is better than LTRT and NONE; thirdly, FTC has the lowest average maximum communication range than other algorithms, which indicates that the most energy-consuming node in the network consumes the lowest power.

Sistemas de gestión de sensores mediante tecnologías M2M

En el proyecto se lleva a cabo un estudio práctico sobre dos escenarios donde intervienen dispositivos relacionados con el Internet de las cosas. También se puede situar como una solución de comunicación M2M. Comunicación máquina a máquina implica un sistema central que es capaz de conectarse con otros sistemas en varios lugares. La conexión permite que el sistema central recoja o envíe datos a cada lugar remoto para su procesamiento. El primer escenario consta de la configuración y montaje de un microcontrolador conocido como Waspmote que se encarga de recoger variables atmosféricas gracias a un conjunto de sensores y enviar los datos a un router multiprotocolo Meshlium mediante tecnología Zigbee, un tipo de red orientada a redes de sensores. Este montaje tiene como fin instalar una estación meteorológica en el campus de la universidad y poder almacenar y administrar sus datos. La segunda parte dos dispositivos de hardware libre como son un Arduino con capacidad GPRS y una RaspberryPi conectada a la red cableada enviaran datos por ejemplo de temperatura y luminosidad a una red social de sensores conocida como Xively, gestionaremos nuestros dispositivos sobre esta plataforma gratuita, que nos permite dar de alta dispositivos, almacenar y representar los datos en tiempo real y consultarlos vía Web o mediante una aplicación móvil realizada para este caso por medio de funciones ofrecidas por Xively. He diseñado una aplicación Android que permite la consulta de datos y administración de sensores por un usuario, intenta abstraer al usuario de la complejidad técnica y acercar los objetos conectados, en este caso sensores. Se han detallado las configuraciones y el proceso de instalación de todos los dispositivos. Se explican conceptos para entender las tecnologías de comunicación, Zigbee y Http, este protocolo participara a nivel de aplicación realizando peticiones o enviando datos, administrando la capacidad y por tanto ahorro. ABSTRACT. The project takes a practical study on two scenarios which involved related to the Internet of Things devices. It can also be placed as a M2M communication solution. Machine to machine communication involves a central system that is able to connect with other systems in several places. The connection allows the central system to collect or send data to each remote location for processing. The first stage consists of the configuration and setup of a microcontroller known as Waspmote which is responsible to collect atmospheric variables by a set of sensors and send the data to a multiprotocol router Meshlium by Zigbee technology, a type of sensor networks oriented network. This assembly aims to set up a weather station on the campus of the university and to store and manage their data. The second part two devices free hardware like Arduino with GPRS capacity and RaspberryPi connected to the wired network send data, temperature and luminosity to a social network of sensors known as Xively, manage our devices on this free platform, which allows us to register devices, store and display data in real time and consult the web or through a mobile application on this case by means of functions offered by Xively. I have designed an Android application that allows data consultation and management of sensors by a user, the user tries to abstract the technical complexity and bring the connected objects, in this case sensors. Were detailed settings and the installation of all devices. Concepts are explained to understand communication technologies, Zigbee and Http, this protocol participate performing application-level requests or sending data, managing capacity and therefore savings.

Plataformas de desarrollo de WSAN y MiddleWare para despliegue

Son muchos los dominios de aplicación que han surgido en los últimos años con motivo de los avances tecnológicos. Algunos como eHealth, Smart Building o Smart Grid están teniendo una gran aceptación por parte de empresas que incrementan sus inversiones en este tipo de campos. Las redes inalámbricas de sensores y actuadores juegan un papel fundamental en el desarrollo de este tipo de aplicaciones. A través de este tipo de redes inalámbricas es posible monitorizar y actuar sobre un entorno gracias a nodos sensores y actuadores de forma cómoda y sencilla. Las WSANs (Wireless Sensors and Actuators Networks) junto con la robótica y M2M (Machine-to-Machine) están forjando el camino hacia el Internet of Things (IoT), un futuro en el que todo esté conectado entre sí. Cada vez aparecen dispositivos más pequeños y autónomos, que junto con el crecimiento de las redes, propician la interconexión de “el todo”. Este Proyecto Fin de Carrera tiene como objetivo contribuir en este avance, desarrollando parcialmente una solución middleware que abstraiga al usuario de la complejidad del hardware, implementando ciertas funcionalidades ofrecidas por el middleware nSOM desarrollado por la UPM. Para conseguir este objetivo se realizará un estudio del Estado del Arte actual y una comparativa de las diferentes plataformas hardware involucradas en las Redes Inalámbricas de Sensores y Actuadores (Wireless Sensor-Actuator Networks). Este estudio tendrá como fin la elección de una de las plataformas hardware para su futuro uso en un despliegue parcial del mencionado middleware nSOM. Posteriormente, se diseñará e implementará un sistema para ejemplificar un caso de uso sobre dicha plataforma integrando la publicación de las características y servicios de cada nodo final y el envío de peticiones y la recepción de respuestas. Finalmente se obtendrá un conjunto de conclusiones a partir de los resultados obtenidos y se detallarán posibles líneas de trabajo. ABSTRACT. There are many applications domains that have arisen because of technological advances in recent years. Some as eHealth, Smart Building or Smart Grid are having a great acceptance by companies that increase their investments in such fields. Wireless sensors and actuators networks play a fundamental role in the development of such applications. By means of this kind of wireless network it is possible to monitor and act upon an environment with the assistance of sensors and actuators nodes, readily. The WSANs (Wireless Sensors and Actuators Networks) together with robotics and M2M (Machine-to-Machine) are forging the way towards the Internet of Things (IoT), a future in which all of them are connected among themselves. Smaller and more autonomous devices are appearing that, along with the growth of networks, foster the interconnection of ‘the whole’. This Degree Final Project aims to contribute to this breakthrough, developing partially a middleware solution that abstracts the user from the complexity of hardware, implementing certain functionalities offered by the nSOM middleware solution carried out by UPM. To achieve this objective a study of the current state of the art and a comparison of the different hardware platforms involved in the Wireless and Actuators Sensor Networks (Wireless Sensor-Actuator Networks) will be performed. This study will aim the election of one of the hardware platforms for its future use in a partial deployment of the mentioned middleware nSOM. Subsequently, a system will be designed and implemented to exemplify a use case on the platform mentioned before integrating the publication of the features and services of each end node and sending requests and receiving responses. Finally a set of conclusions from the results will be stated and possible lines of future works will be detailed.

Integración de SSN con una ontología de servicios

Los servicios en red que conocemos actualmente están basados en documentos y enlaces de hipertexto que los relacionan entre sí sin aportar verdadera información acerca de los contenidos que representan. Podría decirse que se trata de “una red diseñada por personas para ser interpretada por personas”. El objetivo principal de los últimos años es encaminar esta red hacia una web de conocimiento, en la que la información pueda ser interpretada por agentes computerizados de manera automática. Para llevar a cabo esta transformación es necesaria la utilización de nuevas tecnologías especialmente diseñadas para la descripción de contenidos como son las ontologías. Si bien las redes convencionales están evolucionando, no son las únicas que lo están haciendo. El rápido crecimiento de las redes de sensores y el importante aumento en el número de dispositivos conectados a internet, hace necesaria la incorporación de tecnologías de la web semántica a este tipo de redes. Para la realización de este Proyecto de Fin de Carrera se utilizará la ontología SSN, diseñada para la descripción semántica de sensores y las redes de las que forman parte con el fin de permitir una mejor interacción entre los dispositivos y los sistemas que hacen uso de ellos. El trabajo desarrollado a lo largo de este Proyecto de Fin de Carrera gira en torno a esta ontología, siendo el principal objetivo la generación semiautomática de código a partir de un modelo de sistemas descrito en función de las clases y propiedades proporcionadas por SSN. Para alcanzar este fin se dividirá el proyecto en varias partes. Primero se realizará un análisis de la ontología mencionada. A continuación se describirá un sistema simulado de sensores y por último se implementarán las aplicaciones para la generación automática de interfaces y la representación gráfica de los dispositivos del sistema a partir de la representación del éste en un fichero de tipo OWL. ABSTRACT. The web we know today is based on documents and hypertext links that relate these documents with each another, without providing consistent information about the contents they represent. It could be said that its a network designed by people to be used by people. The main goal of the last couple of years is to guide this network into a web of knowledge, where information can be automatically processed by machines. This transformation, requires the use of new technologies specially designed for content description such as ontologies. Nowadays, conventional networks are not the only type of networks evolving. The use of sensor networks and the number of sensor devices connected to the Internet is rapidly increasing, making the use the integration of semantic web technologies to this kind of networks completely necessary. The SSN ontology will be used for the development of this Final Degree Dissertation. This ontology was design to semantically describe sensors and the networks theyre part of, allowing a better interaction between devices and the systems that use them. The development carried through this Final Degree Dissertation revolves around this ontology and aims to achieve semiautomatic code generation starting from a system model described based on classes and properties provided by SSN. To reach this goal, de Dissertation will be divided in several parts. First, an analysis about the mentioned ontology will be made. Following this, a simulated sensor system will be described, and finally, the implementation of the applications will take place. One of these applications will automatically generate de interfaces and the other one will graphically represents the devices in the sensor system, making use of the system representation in an OWL file.

Development of a human movement monitoring system based on wearable devices

It is essential to remotely and continuously monitor the movements of individuals in many social areas, for example, taking care of aging people, physical therapy, athletic training etc. Many methods have been used, such as video record, motion analysis or sensor-based methods. Due to the limitations in remote communication, power consumption, portability and so on, most of them are not able to fulfill the requirements. The development of wearable technology and cloud computing provides a new efficient way to achieve this goal. This paper presents an intelligent human movement monitoring system based on a smartwatch, an Android smartphone and a distributed data management engine. This system includes advantages of wide adaptability, remote and long-term monitoring capacity, high portability and flexibility. The structure of the system and its principle are introduced. Four experiments are designed to prove the feasibility of the system. The results of the experiments demonstrate the system is able to detect different actions of individuals with adequate accuracy.

Design of equalized ROADMs devices with flexible bandwidth based on LCoS technology

This paper describes the theory, design, applications and performance of a new Reconfigurable Add-drop Multiplexer (ROADM) with flexible bandwidth allocation. The device can address several wavelengths at the input to four output fibers, according to the holograms stored in a SLM (Spatial Light Modulator), where all the outputs are equalized in power. All combinations of the input wavelengths are possible at the different output fibers. Each fiber has assigned all the signals with the same bandwidth; the possible bandwidths are 12.5GHz, 25GHz, 50GHz and 100GHz, according to ITU-T 694.1 Recommendation. It is possible to route several signals with different bandwidth in real time thanks to Liquid Crystal over Silicon (LCoS) technology.

Integration of embedded data processing algorithms inside PAMELA devices

PAMELA (Phased Array Monitoring for Enhanced Life Assessment) SHMTM System is an integrated embedded ultrasonic guided waves based system consisting of several electronic devices and one system manager controller. The data collected by all PAMELA devices in the system must be transmitted to the controller, who will be responsible for carrying out the advanced signal processing to obtain SHM maps. PAMELA devices consist of hardware based on a Virtex 5 FPGA with a PowerPC 440 running an embedded Linux distribution. Therefore, PAMELA devices, in addition to the capability of performing tests and transmitting the collected data to the controller, have the capability of perform local data processing or pre-processing (reduction, normalization, pattern recognition, feature extraction, etc.). Local data processing decreases the data traffic over the network and allows CPU load of the external computer to be reduced. Even it is possible that PAMELA devices are running autonomously performing scheduled tests, and only communicates with the controller in case of detection of structural damages or when programmed. Each PAMELA device integrates a software management application (SMA) that allows to the developer downloading his own algorithm code and adding the new data processing algorithm to the device. The development of the SMA is done in a virtual machine with an Ubuntu Linux distribution including all necessary software tools to perform the entire cycle of development. Eclipse IDE (Integrated Development Environment) is used to develop the SMA project and to write the code of each data processing algorithm. This paper presents the developed software architecture and describes the necessary steps to add new data processing algorithms to SMA in order to increase the processing capabilities of PAMELA devices.An example of basic damage index estimation using delay and sum algorithm is provided.

Cognitive strategies for security in wireless sensor networks

Las redes de sensores inalámbricas son uno de los sectores con más crecimiento dentro de las redes inalámbricas. La rápida adopción de estas redes como solución para muchas nuevas aplicaciones ha llevado a un creciente tráfico en el espectro radioeléctrico. Debido a que las redes inalámbricas de sensores operan en las bandas libres Industrial, Scientific and Medical (ISM) se ha producido una saturación del espectro que en pocos años no permitirá un buen funcionamiento. Con el objetivo de solucionar este tipo de problemas ha aparecido el paradigma de Radio Cognitiva (CR). La introducción de las capacidades cognitivas en las redes inalámbricas de sensores permite utilizar estas redes para aplicaciones con unos requisitos más estrictos respecto a fiabilidad, cobertura o calidad de servicio. Estas redes que aúnan todas estas características son llamadas redes de sensores inalámbricas cognitivas (CWSNs). La mejora en prestaciones de las CWSNs permite su utilización en aplicaciones críticas donde antes no podían ser utilizadas como monitorización de estructuras, de servicios médicos, en entornos militares o de vigilancia. Sin embargo, estas aplicaciones también requieren de otras características que la radio cognitiva no nos ofrece directamente como, por ejemplo, la seguridad. La seguridad en CWSNs es un aspecto poco desarrollado al ser una característica no esencial para su funcionamiento, como pueden serlo el sensado del espectro o la colaboración. Sin embargo, su estudio y mejora es esencial de cara al crecimiento de las CWSNs. Por tanto, esta tesis tiene como objetivo implementar contramedidas usando las nuevas capacidades cognitivas, especialmente en la capa física, teniendo en cuenta las limitaciones con las que cuentan las WSNs. En el ciclo de trabajo de esta tesis se han desarrollado dos estrategias de seguridad contra ataques de especial importancia en redes cognitivas: el ataque de simulación de usuario primario (PUE) y el ataque contra la privacidad eavesdropping. Para mitigar el ataque PUE se ha desarrollado una contramedida basada en la detección de anomalías. Se han implementado dos algoritmos diferentes para detectar este ataque: el algoritmo de Cumulative Sum y el algoritmo de Data Clustering. Una vez comprobado su validez se han comparado entre sí y se han investigado los efectos que pueden afectar al funcionamiento de los mismos. Para combatir el ataque de eavesdropping se ha desarrollado una contramedida basada en la inyección de ruido artificial de manera que el atacante no distinga las señales con información del ruido sin verse afectada la comunicación que nos interesa. También se ha estudiado el impacto que tiene esta contramedida en los recursos de la red. Como resultado paralelo se ha desarrollado un marco de pruebas para CWSNs que consta de un simulador y de una red de nodos cognitivos reales. Estas herramientas han sido esenciales para la implementación y extracción de resultados de la tesis. ABSTRACT Wireless Sensor Networks (WSNs) are one of the fastest growing sectors in wireless networks. The fast introduction of these networks as a solution in many new applications has increased the traffic in the radio spectrum. Due to the operation of WSNs in the free industrial, scientific, and medical (ISM) bands, saturation has ocurred in these frequencies that will make the same operation methods impossible in the future. Cognitive radio (CR) has appeared as a solution for this problem. The networks that join all the mentioned features together are called cognitive wireless sensor networks (CWSNs). The adoption of cognitive features in WSNs allows the use of these networks in applications with higher reliability, coverage, or quality of service requirements. The improvement of the performance of CWSNs allows their use in critical applications where they could not be used before such as structural monitoring, medical care, military scenarios, or security monitoring systems. Nevertheless, these applications also need other features that cognitive radio does not add directly, such as security. The security in CWSNs has not yet been explored fully because it is not necessary field for the main performance of these networks. Instead, other fields like spectrum sensing or collaboration have been explored deeply. However, the study of security in CWSNs is essential for their growth. Therefore, the main objective of this thesis is to study the impact of some cognitive radio attacks in CWSNs and to implement countermeasures using new cognitive capabilities, especially in the physical layer and considering the limitations of WSNs. Inside the work cycle of this thesis, security strategies against two important kinds of attacks in cognitive networks have been developed. These attacks are the primary user emulator (PUE) attack and the eavesdropping attack. A countermeasure against the PUE attack based on anomaly detection has been developed. Two different algorithms have been implemented: the cumulative sum algorithm and the data clustering algorithm. After the verification of these solutions, they have been compared and the side effects that can disturb their performance have been analyzed. The developed approach against the eavesdropping attack is based on the generation of artificial noise to conceal information messages. The impact of this countermeasure on network resources has also been studied. As a parallel result, a new framework for CWSNs has been developed. This includes a simulator and a real network with cognitive nodes. This framework has been crucial for the implementation and extraction of the results presented in this thesis.

Ypres rally network

Along of this document the reader could find a suitable network design and solution for the Rally Championship of Ypres meeting all the requirements set by the organization of the rally. These requirements have brought many problems in accordance with the network standards, because the area where the boxes are located is pretty large nevertheless technologies to solve those problems are detailed in the project. It has been included different designs in the project, each one of them based on distinct characteristic as they could be efficient, performance… , and the most important, since the organization of the rally is non-profit , the budget. Nevertheless we didn’t dismiss the use of long-lasting devices, as CISCO devices, despite their price. Furthermore a configuration of routing/switching devices has been explained for those who will be commanded to implement this solution. This solution is design to supply internet access as well as video streaming to all boxes for what teams can follow the championship in live time. The maximum connection of internet service provider (ISP) is 160Mbps, this bandwidth has to be distributed for the boxes dynamically. Finally to ensure the network works out it has to be monitored, this is reachable by using network analysis tools which in this project Wireshark has been chosen. RESUMEN. A lo largo de este documento, el lector encontrara un posible diseño y una posible solución para la red local del circuito de Rally celebrado en Ypres, cumpliendo con todos los requisitos y especificaciones establecidos por la organización. Estos requisitos han causado problemas de conformidad con los estándares de la red, debido a que la zona donde se encuentran los Boxes de los equipos es bastante larga, sin embargo las tecnologías para resolver esos problemas se detallan en este proyecto. Se han incluido diferentes diseños, cada uno de ellos centrado en aspectos diferentes así como la eficacia, el rendimiento, el presupuesto, etc... Esta solución está diseñada para suministrar acceso a Internet, así como la transmisión dinámica de video a todos los equipos para que puedan seguir la competición en tiempo real. Finalmente para controlar y asegurar que la red funciona, será monitorizada mediante herramientas de análisis de redes (Wireshark).

Resilient Wireless Sensor Networks Using Topology Control: A Review

Wireless sensor networks (WSNs) may be deployed in failure-prone environments, and WSNs nodes easily fail due to unreliable wireless connections, malicious attacks and resource-constrained features. Nevertheless, if WSNs can tolerate at most losing k − 1 nodes while the rest of nodes remain connected, the network is called k − connected. k is one of the most important indicators for WSNs’ self-healing capability. Following a WSN design flow, this paper surveys resilience issues from the topology control and multi-path routing point of view. This paper provides a discussion on transmission and failure models, which have an important impact on research results. Afterwards, this paper reviews theoretical results and representative topology control approaches to guarantee WSNs to be k − connected at three different network deployment stages: pre-deployment, post-deployment and re-deployment. Multi-path routing protocols are discussed, and many NP-complete or NP-hard problems regarding topology control are identified. The challenging open issues are discussed at the end. This paper can serve as a guideline to design resilient WSNs.

Gestión dinámica de redes de sensores y actuadores

Este proyecto fin de carrera tiene como finalidad el diseño y la implementación de un sistema de monitorización y gestión dinámica de redes de sensores y actuadores inalámbricos (Wireless Sensor and Actuator Networks – WSAN) en base a la información de configuración almacenada en una base de datos sobre la cual un motor de detección vigila posibles cambios. Este motor informará de los cambios a la herramienta de gestión y monitorización de la WSAN para que sean llevados a cabo en la red desplegada. Este trabajo se enmarca en otro más amplio cuya finalidad es la demostración de la posibilidad de reconfigurar dinámicamente una WSAN utilizando los mecanismos propios de las Líneas de Productos Software Dinámicos (DSPL, por sus siglas en inglés). Se ha diseñado e implementado el software que proporciona los métodos necesarios para la comunicación y actuación sobre la red de sensores y actuadores inalámbricos, además de permitir el control de cada uno de los dispositivos pertenecientes a dicha red y que los dispositivos se incorporen a dicha red de manera autónoma. El desarrollo y pruebas de este proyecto fin de carrera se ha realizado utilizando una máquina virtual sobre la que se ha configurado convenientemente una plataforma que incluye un emulador de red de sensores y actuadores de tecnología SunSpot (Solarium) y todas las herramientas de desarrollo y ejecución necesarias (entre ellas, SunSpot SDK 6.0 y NetBeans). Esta máquina virtual ejecuta un sistema operativo Unix (Ubuntu Server 12.4) y facilita el rápido despliegue de las herramientas implementadas así como la integración de las mismas en desarrollos más amplios. En esta memoria se describe todo el proceso de diseño e implementación del software desarrollado, las conclusiones obtenidas de su ejecución y una guía de usuario para su despliegue y manejo. ABSTRACT. The aim of this project is the design and implementation of a system to monitor and dynamically manage a wireless sensor and actuator network (WSAN) in consistence with the configuration information stored in a database whose changes are monitored by a so-called monitoring engine. This engine informs the management and monitoring tool about the changes, in order for these to be carried out on the deployed network. This project is a part of a broader one aimed at demonstrating the ability to dynamically reconfigure a WSAN using the mechanisms of the Dynamic Software Product Lines (DSPL). A software has been designed and implemented which provides the methods to communicate with and actuate on the WSAN. It also allows to control each of the devices, as well as their autonomous incorporation to the network. Development and testing of this project was done using a virtual machine that has a conveniently configured platform which includes a SunSpot technology WSAN emulator (Solarium) as well as all the necessary development and implementation tools (including SunSpot 6.0 SDK and NetBeans). This virtual machine runs a Unix (Ubuntu Server 12.4) operating system and makes it easy to rapidly deploy the implemented tools and to integrate them into broader developments. This document explains the whole process of designing and implementing the software, the conclusions of execution and a user's manual.