989 resultados para sample covariance matrix


Relevância:

20.00% 20.00%

Publicador:

Resumo:

La vitesse de l'onde de pouls (VOP) est la méthode pour mesurer la rigidité artérielle la plus répandue et la plus validée. C'est aussi un prédicteur indépendant de la mortalité. La Matrix Gla- protein (MGP) est une protein qui inhibe les calcifications vasculaires. MGP nécessite une enzyme dérivée de la vitamine K pour être activée, à l'instar de certains facteurs de coagulation. La forme inactive de MGP, connue sous le terme de « desphospho-uncarboxylated MGP » (dp-ucMGP), peut-être mesurée dans le plasma. Plus les apports de vitamine K sont importants plus les taux de dp-ucMGP diminue. Les taux de dp-ucMGP ont déjà été étudiés et associés à différents marqueurs cardiovasculaires (CV), aux événements CV et à la mortalité. Dans notre travail de recherche nous avons émis l'hypothèse que des taux élevés de dp-ucMGP seraient associés à une VOP élevée. Nous avons recruté les participants à travers une étude multicentrique suisse (SKIPOGH). Le processus de recrutement ciblait des familles dans lesquelles plusieurs membres étaient d'accord de participer. Nous avons mesuré la dp-ucMGP plasmatique grâce à la méthode immuno-enzymatique « ELISA ». Concernant la VOP, nous avons mesuré les ondes de pression au niveau carotidien et fémorale grâce à un tonomètre et calculer la vitesse de leurs propagations. Par la suite nous avons utilisé un modèle de régression linéaire multiple afin de déterminer le lien entre la VOP et dp- ucMGP. Le modèle était ajusté pour l'âge, la fonction rénale et les risques CV classiques. Nous avons inclut 1001 participants dans les analyses (475 hommes et 526 femmes). La valeur moyenne de la VOP était de 7.87 ± 2.10 (m/s) et celle de dp-ucMGP de 0.43 ± 0.20 (nmol/L). La VOP était positivement et significativement associée à dp-ucMGP avant comme après ajustement pour le sexe, l'âge, l'indice de masse corporel, la taille, la pression artérielle systolique et diastolique, la fréquence cardiaque, la fonction rénale, les taux de cholestérol (LDL, HDL), la glycémie, la consommation de tabac, la présence d'un diabète, l'utilisation de médicaments antihypertenseurs ou hypolipémiants et la présence d'antécédents CV (P<0.01). En conclusion, des taux élevés de dp-ucMGP sont positivement et indépendamment associés à la rigidité artérielle après ajustement pour les facteurs de risques CV traditionnels, la fonction rénale et l'âge. Des études expérimentales sont nécessaires afin de déterminer si une supplémentation en vitamine K permet de ralentir l'avancement de la rigidité artérielle grâce à son activation de la MGP.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

BACKGROUND: Risky single-occasion drinking (RSOD) is a prevalent and potentially harmful alcohol use pattern associated with increased alcohol use disorder (AUD). However, RSOD is commonly associated with a higher level of alcohol intake, and most studies have not controlled for drinking volume (DV). Thus, it is unclear whether the findings provide information about RSOD or DV. This study sought to investigate the independent and combined effects of RSOD and DV on AUD. METHODS: Data were collected in the longitudinal Cohort Study on Substance Use Risk Factors (C-SURF) among 5598 young Swiss male alcohol users in their early twenties. Assessment included DV, RSOD, and AUD at two time points. Generalized linear models for binomial distributions provided evidence regarding associations of DV, RSOD, and their interaction. RESULTS: DV, RSOD, and their interaction were significantly related to the number of AUD criteria. The slope of the interaction was steeper for non/rare RSOD than for frequent RSOD. CONCLUSIONS: RSOD appears to be a harmful pattern of drinking, associated with increased AUD and it moderated the relationship between DV and AUD. This study highlighted the importance of taking drinking patterns into account, for both research and public health planning, since RSO drinkers constitute a vulnerable subgroup for AUD.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

BACKGROUND: Alcohol consumption--in particular drinking volume (DV) and risky single occasion drinking (RSOD)--has been related to a wide range of negative consequences and health problems. Previous studies also suggested that drinking in certain locations may be more strongly associated with the occurrence of alcohol-related harm than drinking in others. However, they were conducted in countries culturally and legally different from European countries and were limited to cross-sectional designs. This study investigates the cross-sectional and longitudinal associations of alcohol-related harm with DVs in different locations in a sample of young Swiss men. METHODS: A representative sample of 4536 young Swiss male drinkers completed baseline and 15-month follow-up questionnaires. These assessed DVs in 11 locations, alcohol-related harm (i.e. number of alcohol-related consequences and alcohol use disorder criteria) and frequency of RSOD. Cross-sectional and longitudinal associations of alcohol-related harm with DVs in each location were tested using regression models, with and without adjustment for frequency of RSOD. RESULTS: Both cross-sectional and longitudinal analyses showed significant positive associations between alcohol-related harm and DVs at friends' homes, in discos/nightclubs and in outdoor public places, when controlling for frequency of RSOD. In contrast, the contribution of DVs at one's own home and in restaurants was consistently not significant when adjusted for frequency of RSOD. When controlling for RSOD, associations between alcohol-related harm and DVs in bars/pubs, when playing sports, during other leisure activities, at cinemas/theatres, during sporting events, and during special events were not consistent between cross-sectional and longitudinal analyses. CONCLUSION: Results suggest that prevention interventions should not only target reducing the overall volume of alcohol consumed and the frequency of RSOD in general, but they should additionally focus on limiting alcohol consumption in outdoor public places, discos/nightclubs, and in friends' homes in particular, or at least on preventing harm occurring in these occasions.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The study aimed to identify different patterns of gambling activities (PGAs) and to investigate how PGAs differed in gambling problems, substance use outcomes, personality traits and coping strategies. A representative sample of 4989 young Swiss males completed a questionnaire assessing seven distinct gambling activities, gambling problems, substance use outcomes, personality traits and coping strategies. PGAs were identified using latent class analysis (LCA). Differences between PGAs in gambling and substance use outcomes, personality traits and coping strategies were tested. LCA identified six different PGAs. With regard to gambling and substance use outcomes, the three most problematic PGAs were extensive gamblers, followed by private gamblers, and electronic lottery and casino gamblers, respectively. By contrast, the three least detrimental PGAs were rare or non-gamblers, lottery only gamblers and casino gamblers. With regard to personality traits, compared with rare or non-gamblers, private and casino gamblers reported higher levels of sensation seeking. Electronic lottery and casino gamblers, private gamblers and extensive gamblers had higher levels of aggression-hostility. Extensive and casino gamblers reported higher levels of sociability, whereas casino gamblers reported lower levels of anxiety-neuroticism. Extensive gamblers used more maladaptive and less adaptive coping strategies than other groups. Results suggest that gambling is not a homogeneous activity since different types of gamblers exist according to the PGA they are engaged in. Extensive gamblers, electronic and casino gamblers and private gamblers may have the most problematic PGAs. Personality traits and coping skills may predispose individuals to PGAs associated with more or less negative outcomes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Bloodstream infections and sepsis are a major cause of morbidity and mortality. The successful outcome of patients suffering from bacteremia depends on a rapid identification of the infectious agent to guide optimal antibiotic treatment. The analysis of Gram stains from positive blood culture can be rapidly conducted and already significantly impact the antibiotic regimen. However, the accurate identification of the infectious agent is still required to establish the optimal targeted treatment. We present here a simple and fast bacterial pellet preparation from a positive blood culture that can be used as a sample for several essential downstream applications such as identification by MALDI-TOF MS, antibiotic susceptibility testing (AST) by disc diffusion assay or automated AST systems and by automated PCR-based diagnostic testing. The performance of these different identification and AST systems applied directly on the blood culture bacterial pellets is very similar to the performance normally obtained from isolated colonies grown on agar plates. Compared to conventional approaches, the rapid acquisition of a bacterial pellet significantly reduces the time to report both identification and AST. Thus, following blood culture positivity, identification by MALDI-TOF can be reported within less than 1 hr whereas results of AST by automated AST systems or disc diffusion assays within 8 to 18 hr, respectively. Similarly, the results of a rapid PCR-based assay can be communicated to the clinicians less than 2 hr following the report of a bacteremia. Together, these results demonstrate that the rapid preparation of a blood culture bacterial pellet has a significant impact on the identification and AST turnaround time and thus on the successful outcome of patients suffering from bloodstream infections.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper, we propose a new supervised linearfeature extraction technique for multiclass classification problemsthat is specially suited to the nearest neighbor classifier (NN).The problem of finding the optimal linear projection matrix isdefined as a classification problem and the Adaboost algorithmis used to compute it in an iterative way. This strategy allowsthe introduction of a multitask learning (MTL) criterion in themethod and results in a solution that makes no assumptions aboutthe data distribution and that is specially appropriated to solvethe small sample size problem. The performance of the methodis illustrated by an application to the face recognition problem.The experiments show that the representation obtained followingthe multitask approach improves the classic feature extractionalgorithms when using the NN classifier, especially when we havea few examples from each class

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A new sample of drosophilids was obtained from Font Groga (Barcelona) on 9th October 2013. Flies were netted over 12 baits containing fermenting bananas placed along a trail from 4 to 7 pm. The number of flies classified according to species and sex is presented in Table 1. The most abundant species is D. subobscura (62.60%). This is expected because the sample was obtained during its autumn peak of expansion. Also interesting is to find again D. suzukii, and in a percentage similar (9.20%) to that obtained in 2012 sample. This species invaded recently many European regions and seems it is well established. We have finally estimated the species diversity using H" (Shannon diversity index) and J (Shannon uniformity index). The values obtained were 0.990 and 0.615, respectively. They are similar to those estimates obtained in the same site by Calabria in autumn 2007 and higher than those of Canals et al. in late autumn 2012.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This review has tried to collect and correlate all the various equations for the g matrix of strong field d5 systems obtained from different basis sets using full electron and hole formalism calculations. It has corrected mistakes found in the literature and shown how the failure to properly take in symmetry boundary conditions has produced a variety of apparently inconsistent equations in the literature. The review has reexamined the problem of spin-orbit interaction with excited t4e states and finds that the earlier reports that it is zero in octahedral symmetry is not correct. It has shown how redefining what x, y, and z are in the principal coordinate system simplifies, compared to previous methods, the analysis of experimental g values with the equations.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Results on the optimization of analytical methods for the determination of phosphorus in phosphino-polycarboxylate (PPCA), used frequently as scale inhibitor during oil production, by ICP-AES and ICP-MS are presented. Due to the complex matrix of production waters (brines) and their high concentration in inorganic phosphorus, the separation of organic phosphorus prior to its determination is necessary. In this work, minicolumns of silica immobilized C18 were used. Optimization of the separation step resulted in the following working conditions: (1) prewashing of the column with methanol (80% v/v); (2) use of a flow rate of 5 mL/min and 10 mL/min, respectively, for the preconditioning step and for percolation of the water sample; (3) final elution of organic phosphorus with 7 mL of buffer of H3BO3/NaOH (0.05 M, pH 9) with a flow rate of 1 mL/min. Sample detection limits (3s) for different combinations of nebulizers and spectrometric methods, based on 10 mL water aliquots, are: ICP-AES -Cross flow (47 mg/L) and Ultrasonic (18 mug/L); ICP-MS -Cross flow (1.2 mug/L), Cyclonic (0.7 mug/L) and Ultrasonic (0.5 mug/L). Typical recoveries of organic phosphorus are between 90 and 95% and the repeatability of the whole procedure is better than 10%. The developed methodology was applied successfully to samples from the oil-well NA 46, platform PNA 2, Campos basin, Brazil. Assessment of the PPCA inhibitor was possible at lower concentrations than achieved by current analytical methods, resulting in benefits such as reduced cost of chemicals, postponed oil production and lower environmental impacts.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A flow injection spectrophotometric method was developed for determining aspartame in sweeteners. Sample was dissolved in water and 250 µL of the solution was injected into a carrier stream of 5.0 x 10-5 mol L-1 sodium borate solution. The sample flowed through a column (14 cm x 2.0 mm) packed with Zn3(PO4)2 immobilized in a polymeric matrix of polyester resin and Zn(II) ions were released from the solid-phase reactor by formation of the Zn(II)-aspartame complex. The mixture merged with a stream of borate buffer solution (pH 9.0) containing 0.030 % (m/v) alizarin red S and the Zn(II)-alizarin red complex formed was measured spectrophotometrically at 540 nm. The calibration graph for aspartame was linear in the concentration range from 10 to 80 µg mL-1 with a detection limit of 4 µg mL-1 of aspartame. The RSD was 0.3 % for a solution containing 40 µg mL-1 aspartame (n = 10) and seventy results were obtained per hour. The proposed method was applied for determining aspartame in commercial sweeteners.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Independent of the sample form (powder or film), XRD analysis of Ir0,3Ti(0,7-x)Ce xO2, (nominal) mixtures, for x=0, shows the formation of a solid solution phase between IrO2 and TiO2, as well as the rutile phases of IrO2 and TiO2. The presence of the anatase phase of TiO2 is also confirmed. The introduction of 30 mol% CeO2 in the mixture reveals the presence of the CeO2 and Ce2O3 phases, besides the already mentioned ones, in the powder. In the film form, however, an amorphous phase is identified. When all of the TiO2 is substituded by CeO2, for both sample forms, the only phases found are IrO2, CeO2 and Ce2O3. This result suggests cerium oxides are not capable of forming solid solutions with either IrO2 or (Ir,Ti)O2 acting solely as a dispersant matrix for these phases. These results are consistent with the much higher electrochemically active surface area when CeO2 is introduced in the binary Ti/Ir0,3Ti0,7O2 mixture. It was possible to establish a relationship between the electrochemical stability of the supported films and their crystalline structure. The unexpected presence of TiO2 and Ti2O3 in the Ti/Ir0,3Ce0,7O2 (film sample) is attributed to oxidation of the Ti support during the calcination step.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article describes the combination of low- and high-pressure flow systems for the determination of Magnesium, Calcium and Strontium by flame atomic absorption spectrometry (FAAS). In the low-pressure system a short C-18 RP column (length 0,5 cm) was utilized for the preconcentration/matrix separation step, xylenol orange was used as chelating agent and tetrabutylamonium acetate for ion pair formation. The hydraulic high pressure nebulization (HHPN) was used for sample transport and sample introduction in the high pressure system. The repeatabilities and detection limits for Mg, Ca and Sr were determined and compared with those obtained by pneumatic nebulization (PN). The results show that the detection limits obtained using the HHPN for Mg, Ca and Sr are between 1.5 to 2 times better than those obtained by PN when the signal transient was measured in area. The system presented a sampling frequency of 130 h-1 for direct determination of Mg, Ca or Sr in samples of saturated sodium chloride used in the production of chlorine and sodium hydroxide.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

One of the main problems in quantitative analysis of complex samples by x-ray fluorescence is related to interelemental (or matrix) effects. These effects appear as a result of interactions among sample elements, affecting the x-ray emission intensity in a non-linear manner. Basically, two main effects occur; intensity absorption and enhancement. The combination of these effects can lead to serious problems. Many studies have been carried out proposing mathematical methods to correct for these effects. Basic concepts and the main correction methods are discussed here.