Phosphate treatment of frozen prawns. Pt. 1. Screening of various phosphates for prevention of drip loss

Various phosphates and their mixtures were screened for their efficiency of preventing drip loss in frozen prawns. The effectiveness of the phosphates decreased in the following order: Sodium tripolyphosphate — Sodium pyrophosphate — Sodium hexametaphosphate Sodium metaphosphate — Sodium dihydrogen phosphate; the last two being ineffective. Even though thaw drip loss was reduced by the above treatments the organoleptic quality of the thawed as well as cooked products was unsatisfactory, discoloration being the major defect. A solution of a mixture of 12% sodium tripolyphosphate and 8.6% sodium dihydrogen phosphate or 2% citric acid in water when used as dip prevented thaw drip loss, improved cooked yield and organoleptic quality without adversely affecting the biochemical characteristics. Commercial scale trials showed that the results are highly reproducible.

Role of transglutaminase-mediated cross-linking of protein in the temperature-dependent setting of Alaska pollack surimi

During the low temperature setting of fish paste, myosin heavy chain (MHC) is polymerized to cross-linked myosin heavy chain (CMHC), which is considered to occur by the action of endogenous transglutaminase (TGase). In this study the contribution of TGase on the setting of Alaska pollack surimi at different temperatures was studied. Alaska pollack surimi was ground with 3% NaCl, 30% h2o and with or without ethylene glycol bis (β-aminoethylether) N, N, N¹,N¹- tetra acetic acid (EGTA), an inhibitor of TGase. Among the pastes without EGTA, highest TGase activity was observed at 25°C but breaking force of the gel set at 25°C was lower than that set at 30°, 35°, and 40°C. Addition of EGTA (5m mol/kg) to the paste suppressed TGase activity at all setting temperatures from 20° to 40°C. Gelation of the pastes and cross-linking of MHC on addition of EGTA were suppressed completely at 20° and 25°C, partially at 30° and 35°C, and not at all at 40°C. The findings suggested that during the setting of Alaska pollack surimi TGase mediated cross-linking of MHC was strong at around 25°C but the thermal aggregation of MHC by non-covalent bonds was strong at above 35°C. Setting of surimi at 40°C and cross-linking of its MHC did not involve TGase.

Phosphate treatment of frozen prawns. Pt 2. Frozen storage characteristics of prawn meat treated with polyphosphates

This communication reports the changes in physical, organoleptic and biochemical characteristics of prawn meat dip-treated with alkaline and neutral solutions of polyphosphates during frozen storage. Results are presented on changes in thawed and cooked yields, water extractable nitrogen, non-protein nitrogen, free amino-nitrogen, salt solubility, myosin and moisture in the muscle and loss of soluble nitrogenous constituents in thaw drip during frozen storage up to seven months. The salt solubility remained unchanged during storage in samples treated with neutral polyphosphate solutions and the organoleptic quality was superior to control sample. It is concluded that dip treatment with neutralized solutions of tripolyphosphate not only maintains correct drained weight and improves cooked yield during prolonged frozen storage but also protects the frozen product from denaturation as measured by the salt solubility of the proteins.

固氮蓝藻与非固氮蓝藻谷氨酰胺酶的基因克隆、表达及其特性分析

蓝藻是唯一可以进行有氧光合作用的原核生物，是水生食物链主要的初级生产者。氮素是蓝藻细胞必需的大量营养元素之一，揭示蓝藻如何应对环境中氮素的变化、维持自身碳氮平衡的分子机理，对深刻理解蓝藻与环境的相互作用、有效促进或控制蓝藻的生长与繁殖，有重要的理论和实践意义。已有的研究发现，蓝藻细胞的碳氮平衡主要是通过调控氨同化途径中的关键酶类实现。但先前的研究主要集中在固氮蓝藻谷氨酰胺合成酶（GS）-谷氨酸合成酶(GOGAT)循环的特性分析方面，而对催化谷氨酰胺水解生成谷氨酸和氨的主要酶之一谷氨酰胺酶的报道极少，其分子特性及生理学意义尚不明了。因此，本论文以模式固氮蓝藻鱼腥藻7120 和非固氮蓝藻集胞藻6803 为材料，采用分子生物学和生物化学方法，对蓝藻谷氨酰胺酶进行体外研究，并对其生物学功能进行了初步探讨，获得了如下主要结果：1）对体外重组蛋白的酶活性检测发现，两类蓝藻基因组编码的假定性谷氨酰胺酶，均具有谷氨酰胺酶催化活性，表明基因组注释是准确的；2）固氮蓝藻重组酶（All2934、All4774）与非固氮蓝藻重组酶（Slr2079）酶学特征差异显著，具有不同的最适pH、温度及底物亲和力；3）固氮蓝藻重组酶All2934 催化活性受磷酸盐的激活，而非固氮蓝藻重组酶Slr2079 在高Na+浓度下活性更高；4）RT-PCR 分析结果表明，在正常培养条件下，两类蓝藻的谷氨酰胺酶基因在细胞内均有表达；5）在缺氮培养条件下，固氮蓝藻谷氨酰胺酶基因all2934 的表达水平发生明显变化，而all4774 保持相对稳定，表明前者可能在这类细胞应对氮饥饿过程中起重要作用；6）在正常培养条件下，非固氮蓝藻谷氨酰胺酶基因的缺失突变体(Δslr2079)与野生型表型相似，但在盐胁迫条件下，突变体生长速率及光合放氧活性均高于野生型，表明该基因可能在提高非固氮蓝藻细胞高盐耐受力方面起负调控作用。上述重要发现，不仅初步揭示了光合自氧生物谷氨酰胺酶体外重组酶的分子特征，也为进一步研究谷氨酰胺酶在蓝藻细胞内的专一性功能奠定了重要基础。

Bias-dependent recovery time of all-optical resonant nonlinearity in InGaAsP/InGaAsP MQW waveguide

We have investigated a resonant refractive nonlinearity in a semiconductor waveguide by measuring intensity dependent phase shifts and bias-dependent recovery times. The measurements were performed on an optimized 750-μm-long AR coated buried heterostructure MQW p-i-n waveguide with a bandedge at 1.48 μm. Figure 1 shows the experimental arrangement. The mode-locked color center laser was tuned to 50 meV beyond the bandedge and 8 ps pulses with peak incident power up to 57 W were coupled into the waveguide. Some residual bandtail absorption remains at this wavelength and this is sufficient to cause carriers to be photogenerated and these give rise to a refractive nonlinearity, predominantly by plasma and bandfilling effects. A Fabry-Perot interferometer is used to measure the spectrum of the light which exits the waveguide. The nonlinearity within the guide causes self phase modulation (SPM) of the light and a study of the spectrum allows information to be recovered on the magnitude and recovery time of the nonlinear phase shift with a reasonable degree of accuracy. SPM spectra were recorded for a variety of pulse energies coupled into he unbiased waveguide. Figure 2 shows the resultant phase shift measured from the SPM spectra as a function of pulse energy. The relationship is a linear one, indicating that no saturation of the nonlinearity occurs for coupled pulse energies up to 230 pJ. A π phase shift, the minimum necessary for an all-optical switch, is obtained for a coupled pulse energy of 57 pJ while the maximum phase shift, 4 π, was measured for 230 pJ. The SPM spectra were highly asymmetric with pulse energy shifted to higher frequencies. Such spectra are characteristic of a slow, negative nonlinearity. This relatively slow speed is expected for the unbiased guide as the recovery time will be of the order of the recombination time of the photogenerated electrons, about 1 ns for InGaAsP material. In order to reduce the recovery time of the nonlinearity, it is necessary to remove the photogenerated carriers from the waveguide by a process other than recombination. One such technique is to apply a reverse bias to the waveguide in order to sweep the carriers out. Figure 3 shows the effect on the recovery time of the nonlinearity of applying reverse bias to the waveguide for 230 pJ coupled power. The recovery time was reduced from one much longer than the length of the pulse, estimated to be about 1 ns, at zero bias to 18 ± 3 ps for a bias voltage greater than -4 V. This compares with a value of 24 ps obtained in a bulk waveguide.

Waveguide lasers in Er:Yb-doped phosphate glass fabricated by femtosecond laser writing

Advanced waveguide lasers, operating both in continuous wave and pulsed regimes, have been realized in an active phosphate glass by direct writing with femtosecond laser pulses. Stable single mode operation was obtained; the laser provided more than 50 m W in single longitudinal and transverse mode operation with 21% slope efficiency. Furthermore, by combining a high gain waveguide and an innovated fiber-pigtailed saturable absorber based on carbon nanotubes, a mode-locked ring laser providing transform limited 1.6 ps pulses was demonstrated. © 2007 IEEE.

TOPS (Task optimization in the presence of signal-dependent noise) model

This paper proposes a movement trajectory planning model, which is a maximum task achievement model in which signal-dependent noise is added to the movement command. In the proposed model, two optimization criteria are combined, maximum task achievement and minimum energy consumption. The proposed model has the feature that the end-point boundary conditions for position, velocity, and acceleration need not be prespecified. Consequently, the method can be applied not only to the simple point-to-point movement, but to any task. In the method in this paper, the hand trajectory is derived by a psychophysical experiment and a numerical experiment for the case in which the target is not stationary, but is a moving region. It is shown that the trajectory predicted from the minimum jerk model or the minimum torque change model differs considerably from the results of the psychophysical experiment. But the trajectory predicted from the maximum task achievement model shows good qualitative agreement with the hand trajectory obtained from the psychophysical experiment. © 2004 Wiley Periodicals, Inc.