Modified hydrogel matrices in fibre optic sensors

Common problems encountered in clinical sensing are those of non-biocompatibility, and slow response time of the device. The latter, also applying to chemical sensors, is possibly due to a lack of understanding of polymer support or membrane properties and hence failure to optimise membranes chosen for specific sensor applications. Hydrogels can be described as polymers which swell in water. In addition to this, the presence of water in the polymer matrix offers some control of biocompatibility. They thus provide a medium through which rapid transport of a sensed species to an incorporated reagent could occur. This work considers the feasibility of such a system, leading to the design and construction of an optical sensor test bed. The development of suitable membrane systems and of suitable coating techniques in order to apply them to the fibre optics is described. Initial results obtained from hydrogel coatings implied that the refractive index change in the polymer matrix, due to a change in water content with pH is the major factor contributing to the sensor response. However the presence of the colourimetric reagent was also altering the output signal obtained. An analysis of factors contributing to the overall response, such as colour change and membrane composition were made on both the test bed, via optical response, and on whole membranes via measurement of water content change. The investigation of coatings with low equilibrium water contents, of less than 10% was carried out and in fact a clearer signal response from the test bed was noted. Again these membranes were suprisingly responding via refractive index change, with the reagent playing a primary role in obtaining a sensible or non-random response, although not in a colourimetric fashion. A photographic study of these coatings revealed some clues as to the physical nature of these coatings and hence partially explained this phenomenon. A study of the transport properties of the most successful membrane, on a coated wire electrode and also on the fibre optic test bed, in a series of test environments, indicated that the reagent was possibly acting as an ion exchanger and hence having a major influence on transport and therefore sensor characteristics.

A web processing service for validating interpolation

An interoperable web processing service (WPS) for the automatic interpolation of environmental data has been developed in the frame of the INTAMAP project. In order to assess the performance of the interpolation method implemented, a validation WPS has also been developed. This validation WPS can be used to perform leave one out and K-fold cross validation: a full dataset is submitted and a range of validation statistics and diagnostic plots (e.g. histograms, variogram of residuals, mean errors) is received in return. This paper presents the architecture of the validation WPS and a case study is used to briefly illustrate its use in practice. We conclude with a discussion on the current limitations of the system and make proposals for further developments.

Fluidized bed gasification of biomass

A fluidized bed process development unit of 0.8 m internal diameter was designed on basis of results obtained from a bench scale laboratory unit. For the scaling up empirical models from the literature were used. The process development unit and peripheral equipment were constructed, assembled and commissioned, and instruments were provided for data acquisition. The fluidization characteristics of the reactor were determined and were compared to the design data. An experimental programme was then carried out and mass and energy balances were made for all the runs. The results showed that the most important independent experimental parameter was the air factor, with an optimum at 0.3. The optimum higher heating value of the gas produced was 6.5 MJ/Nm3, while the thermal efficiency was 70%. Reasonably good agreement was found between the experimental results, theoretical results from a thermodynamic model and data from the literature. It was found that the attainment of steady state was very sensitive to a continuous and constant feedstock flowrate, since the slightest variation in feed flow resulted in fluctuations of the gas quality. On the basis of the results a set of empirical relationships was developed, which constitutes an empirical model for the prediction of the performance of fluidized bed gasifiers. This empirical model was supplemented by a design procedure by which fluidized bed gasifiers can be designed and constructed. The design procedure was then extended to cover feedstock feeding and gas cleaning in a conceptual design of a fluidized bed gasification facility. The conceptual design was finally used to perform an economic evaluation of a proposed gasification facility. The economics of this plant (retrofit application) were favourable.

Development of performance models for co-operative information systems in an organisational context

The thesis reports of a study into the effect upon organisations of co-operative information systems (CIS) incorporating flexible communications, group support and group working technologies. A review of the literature leads to the development of a model of effect based upon co-operative business tasks. CIS have the potential to change how co-operative business tasks are carried out and their principal effect (or performance) may therefore be evaluated by determining to what extent they are being employed to perform these tasks. A significant feature of CIS use identified is the extent to which they may be designed to fulfil particular tasks, or by contrast, may be applied creatively by users in an emergent fashion to perform tasks. A research instrument is developed using a survey questionnaire to elicit users judgements of the extent to which a CIS is employed to fulfil a range of co-operative tasks. This research instrument is applied to a longitudinal study of Novell GroupWise introduction at Northamptonshire County Council during which qualitative as well as quantitative data were gathered. A method of analysis of questionnaire results using principles from fuzzy mathematics and artificial intelligence is developed and demonstrated. Conclusions from the longitudinal study include the importance of early experiences in setting patterns for use for CIS, the persistence of patterns of use over time and the dominance of designed usage of the technology over emergent use.

The delivery of bioactive proteins using biodegradable microspheres

In this project, antigen-containing microspheres were produced using a range of biodegradable polymers by single and double emulsion solvent evaporation and spray drying techniques. The proteins used in this study were mainly BSA, tetanus toxoid, F1 and V, Y. pestis subunit vaccines and the cytokine, interferon-gamma. The polymer chosen for use in the vaccine preparation will directly determine the characteristics of the formulation. Full in vitro analysis of the preparations was carried out, including surface hydrophobicity and drug release profiles. The influence of the surfactants employed on microsphere surface hydrophobicity was demonstrated. Preparations produced with polyhydroxybutyrate and poly(DTH carbonate) polymers were also shown to be more hydrophobic than PLA microspheres, which may enhance particle uptake by antigen presenting cells and Peyer's patches. Systematic immunisation with microspheres with a range of properties showed differences in the time course and extent of the immune response generated, which would allow optimisation of the dosing schedule to provide maximal response in a single dose preparation. Both systematic and mucosal responses were induced following oral delivery of microencapsulated tetanus toxoid indicating that the encapsulation of the antigen into a microsphere preparation provides protection in the gut and allows targeting of the mucosal-associated lymphoid tissue. Co-encapsulation of adjuvants for further enhancement of immune response was also carried out and the effect on loading and release pattern assessed. Co-encapsulated F1 and interferon-gamma was administered i.p. and the immune responses compared with singly encapsulated and free subunit antigen.

Abrasion resistance of fibre reinforced concrete floors

This thesis focuses on the investigation of the abrasion resistance of fibre reinforced concrete floors at both the macro and micro levels. A literature review of the available literature concerning subjects allied to the current project is included. This highlights themes relevant to wear mechanisms and the factors influencing it: factors that affect the abrasion resistance of concrete and several test methods for assessing it; and the historical development of fibres and the properties of different fibre types and their influence on concrete. Three accelerated abrasion testers were compared and critically discussed for their suitability for assessing the abrasion resistance of concrete floors. Based on the experimental findings one accelerated abrasion apparatus was selected as more appropriate to be used for carrying out the main investigations. The laboratory programme that followed was undertaken to investigate the influence of various material and construction factors on abrasion resistance. These included mix variations (w/c ratio), fibre reinforcement, geometry, type and volume, curing method and superplasticizing agents. The results clearly show that these factors significantly affected abrasion resistance and several mechanisms were presumed to explain and better understand these observations. To verify and understand these mechanisms that are accountable for the breakdown of concrete slabs, the same concrete specimens that were used for the macro-study, were also subjected to microstructutural investigations using techniques such as Microhardness examination, Mercury intrusion porosimetry and Petrographic examination. It has been found that the abrasion resistance of concrete is primarily dependent on the microstructure and porosity of the concrete nearest to the surface. The feasibility of predicting the abrasion resistance of fibre reinforced concrete floors by indirect and non-destructive methods was investigated using five methods that have frequently been used for assessing the quality of concrete. They included the initial surface absorption test, the impact test, ball cratering, the scratch test and the base hardness test. The impact resistance (BRE screed tester) and scratch resistance (Base hardness tester) were found to be the most sensitive to factors affecting abrasion resistance and hence are considered to be the most appropriate testing techniques. In an attempt to develop an appropriate method for assessing the abrasion resistance of heavy-duty industrial concrete floors, it was found that the presence of curing/sealing compound on the concrete surface at the time of accelerated abrasion testing produces inappropriate results. A preliminary investigation in the direction of modifying the Aston accelerated abrasion tester has been carried out and a more aggressive head has been developed and is pending future research towards standardisation.

A comparison of road accidents in developing countries with special reference to Jamaica

This research was originally undertaken to aid the Jamaican government and the World Bank in making funding decisions relative to improvement of road systems and traffic control in Jamaica. An investigation of the frequency and causes of road accidents and an evaluation of their impact on the Jamaican economy were carried out, and a model system which might be applied was developed. It is believed that the importance of road accident economic and manpower losses to the survival of developing countries, such as Jamaica, cannot be overemphasized. It is suggested that the World Bank, in cooperation with national governments, has a role to play in alleviating this serious problem. Data was collected from such organizations as the Jamaica Ministry of Construction, Police Department, the World Bank, and the World Health Organization. A variety of methodologies were utilized to organize this data in useful and understandable forms. The most important conclusion of this research is that solvable problems in road systems and in traffic control result in the unnecessary loss of useful citizens, in both developed and developing countries. However, a lack of information and understanding regarding the impact of high rates of road accident death and injury on the national economy and stability of a country results in an apparent lack of concern. Having little internal expertise in the field of road accident prevention, developing countries usually hire consultants to help them address this problem. In the case of Jamaica, this practice has resulted in distrust and hard feelings between the Jamaican authorities and major organizations involved in the field. Jamaican officials have found confusing the recommendations of most experts contracted to study traffic safety. The attempts of foreign consultants to utilize a technological approach (the use of coding systems and computers), methods which do not appear cost-effective for Jamaica, have resulted in the expenditure of limited funds for studies which offer no feasible approach to the problem. This funding limitation, which hampers research and road improvement, could be alleviated by such organizations as the World Bank. The causes of high accident rates are many, it was found. Formulation of a plan to address this serious problem must take into account the current failure to appreciate the impact of a high level of road accidents on national economy and stability, inability to find a feasible approach to the problem, and inadequate funding. Such a plan is discussed in detail in the main text of this research.

Women's experiential journey toward voluntary childlessness

Voluntary childlessness is a relatively novel yet growing phenomenon. This idiographic study explored three women's experiential journeys toward voluntary childlessness. Semi-structured interviews were carried out and analysed using Interpretative Phenomenological Analysis. Themes identified were: Owning the choice to be childless, social expectations, and models of mothering. Despite defining ‘voluntary childlessness’ as an unequivocal decision, the women's experiential accounts revealed an intrinsic fluidity in their journeys toward childlessness. Factors including beliefs in equality, independence and career aspirations competed with constructs of mothering/motherhood, partnership and choice to create a complex tapestry of contributory factors in these women's childlessness. The findings question the notion of choice and particularly women's ownership of that choice. The journeys toward childlessness these women shared reveal a synthesis of agentic decision-making, personal histories and challenging lifestyle choices bound up within an existential need to be a woman. More research is needed to determine the place of voluntary childlessness within society. Copyright © 2010 John Wiley & Sons, Ltd

Wireless power charger for light electric vehicles

Wireless power transmission technology is gaining more and more attentions in city transportation applications due to its commensurate power level and efficiency with conductive power transfer means. In this paper, an inductively coupled wireless charging system for 48V light electric vehicle is proposed. The power stages of the system is evaluated and designed, including the high frequency inverter, the resonant network, full bridge rectifier, and the load matching converter. Small signal modeling and linear control technology is applied to the load matching converter for input voltage control, which effectively controls the wireless power flow. The prototype is built with a dsPIC digital signal controller; the experiments are carried out, and the results reveal nature performances of a series-series resonant inductive power charger in terms of frequency, air-gap length, power flow control, and efficiency issues.

Thermochemical characterisation of agricultural wastes from West Africa

Thermochemical characterisation of agricultural biomass wastes from West African region has been carried out and their potential use as feedstock in thermochemical conversion processes determined. Proximate, ultimate, structural compositions, calorific values, thermogravimetry (TGA) and derivative thermogravimetry (DTG) analyses were carried out on corn straw and cobs, rice straw and husks, cocoa pod, jatropha curcas and moringa olifiera seed cakes, parinari polyandra fruit shell and sugarcane bagasse. Moringa olifiera seed cakes and cocoa pods were found to contain the highest moisture contents. Rice straw was found to contain a high ash content of 45.76. wt.%. The level of nitrogen and sulphur in all the samples were very low. Rice husk was found to have the highest lignin contents while corn cob low lignin contents indicate a potential feedstock source for quality bio-oil production using thermochemical process. © 2013.

The predictive ability of clinical tests for contact lens induced dry eye

Approximately half of current contact lens wearers suffer from dryness and discomfort, particularly towards the end of the day. Contact lens practitioners have a number of dry eye tests available to help them to predict which of their patients may be at risk of contact lens drop out and advise them accordingly. This thesis set out to rationalize them to see if any are of more diagnostic significance than others. This doctorate has found: (1) The Keratograph, a device which permits an automated, examiner independent technique for measuring non invasive tear break up time (NITBUT) measured NITBUT consistently shorter than measurements recorded with the Tearscope. When measuring central corneal curvature the spherical equivalent power of the cornea was measured as being significantly flatter than with a validated automated keratometer. (2) Non-invasive and invasive tear break-up times significantly correlated to each other, but not the other tear metrics. Symptomology, assessed using the OSDI questionnaire, correlated more with those tests indicating possible damage to the ocular surface (including LWE, LIPCOF and conjunctival staining) than with tests of either tear volume or stability. Cluster analysis showed some statistically significant groups of patients with different sign and symptom profiles. The largest cluster demonstrated poor tear quality with both non-invasive and invasive tests, low tear volume and more symptoms. (3) Care should be taken in fitting patients new to contact lenses if they have a NITBUT less than 10s or an OSDI comfort rating greater than 4.2 as they are more likely to drop-out within the first 6 months. Cluster analysis was not found to be beneficial in predicting which patients will succeed with lenses and which will not. A combination of the OSDI questionnaire and a NITBUT measurement was most useful both in diagnosing dry eye and in predicting contact lens drop out.

Knowledge transfer in globally distributed teams:the role of transactive memory

This paper explores the role of transactive memory in enabling knowledge transfer between globally distributed teams. While the information systems literature has recently acknowledged the role transactive memory plays in improving knowledge processes and performance in colocated teams, little is known about its contribution to distributed teams. To contribute to filling this gap, knowledge-transfer challenges and processes between onsite and offshore teams were studied at TATA Consultancy Services. In particular, the paper describes the transfer of knowledge between onsite and offshore teams through encoding, storing and retrieving processes. An in-depth case study of globally distributed software development projects was carried out, and a qualitative, interpretive approach was adopted. The analysis of the case suggests that in order to overcome differences derived from the local contexts of the onsite and offshore teams (e.g. different work routines, methodologies and skills), some specific mechanisms supporting the development of codified and personalized ‘directories’ were introduced. These include the standardization of templates and methodologies across the remote sites as well as frequent teleconferencing sessions and occasional short visits. These mechanisms contributed to the development of the notion of ‘who knows what’ across onsite and offshore teams despite the challenges associated with globally distributed teams, and supported the transfer of knowledge between onsite and offshore teams. The paper concludes by offering theoretical and practical implications.

Problems with mutual wills:a study of probate practice

Legislation: Law of Property (Miscellaneous Provisions) Act 1989 (c.34) s.2 Case: Healey v Brown [2002] W.T.L.R. 849 (Ch D) Paper looks at the use of mutual wills in practice. An empirical survey of probate solicitors is carried out and the results analysed. Significantly most solicitors seem, unaware of the controversial ruling as regards mutual wills in Healey v Brown and the impact of S.2 Law of Property Miscellaneous Provisions Act 1989 where land is concerned. Unsuprisingly the survey demonstrates that mutual wills are not commonly used and tend to be avoided by practising solicitors.

Outsourcing:an Irish perspective

This paper investigates three case studies with regards their outsourcing initiatives from an Irish perspective, the benefits and problems they encountered, the contracts they have constructed, and where they have outsourced and the reasons behind them. The research took place over a period of two years, and the information for the case studies was gleaned from a number of sources including: published papers about the companies, the company websites, annual financial reports, the questionnaire they filled out, and interviews with key decision making personnel in the company. Follow up interviews were conducted where it was felt they were required. Key findings were that: it is very important to have the outsourcing initiative driven from the top down, and it is imperative to construct a contract that promotes a relationship based on mutual trust and respect, the use of Ireland for outsourcing, and the benefits and problem companies have experienced.

The Methods of Conducting Studies with the Application of Combined Didactic Interactive Programme Systems

The methods of the application of the Combined didactic interactive programme system on electrical engineering disciplines has been worked out and the possibility of its application for providing a complex of different kinds of studies: lectures, tutorials, laboratory studies and also for organizing students’ independent work has been verified. The given methods provide the organization of the reproductive (recognition and reproduction) and productive heuristic educational-cognitive students’ activity in conditions of gradualness and completeness of education with the closed directed automatic control.