Interactions between pyrazole derived enantiomers and Chiralcel OJ: Prediction of enantiomer absolute configurations and elution order by molecular dynamics simulations

The separation of enantiomers and confirmation of their absolute configurations is significant in the development of chiral drugs. The interactions between the enantiomers of chiral pyrazole derivative and polysaccharide-based chiral stationary phase cellulose tris(4-methylbenzoate) (Chiralcel OJ) in seven solvents and under different temperature were studied using molecular dynamics simulations. The results show that solvent effect has remarkable influence on the interactions. Structure analysis discloses that the different interactions between two isomers and chiral stationary phase are dependent on the nature of solvents, which may invert the elution order. The computational method in the present study can be used to predict the elution order and the absolute configurations of enantiomers in HPLC separations and therefore would be valuable in development of chiral drugs.

Polynomial Model for High-Order and Multi-Carrier Passive Intermodulation Products

Passive intermodulation (PIM) often limits the performance of communication systems, particularly in the presence of multiple carriers. Since the origins of the apparently multiple physical sources of nonlinearity causing PIM in distributed circuits are not fully understood, the behavioural models are frequently employed to describe the process of PIM generation. In this paper, a memoryless nonlinear polynomial model, capable of predicting high-order multi-carrier intermodulation products, is deduced from the third-order two-tone PIM measurements on a microstrip transmission line with distributed nonlinearity. The analytical model of passive distributed nonlinearity is implemented in Keysight Technology’s ADS simulator to evaluate the adjacent band power ratio for three-tone signals. The obtained results suggest that the costly multi-carrier test setups can possibly be replaced by a simulation tool based on the properly retrieved nonlinear polynomial model.

LaGomiCs - Lagomorph Genomics Consortium: An International Collaborative Effort for Sequencing the Genomes of an Entire Mammalian Order

The order Lagomorpha comprises about 90 living species, divided in 2 families: the pikas (Family Ochotonidae), and the rabbits, hares, and jackrabbits (Family Leporidae). Lagomorphs are important economically and scientifically as major human food resources, valued game species, pests of agricultural significance, model laboratory animals, and key elements in food webs. A quarter of the lagomorph species are listed as threatened. They are native to all continents except Antarctica, and occur up to 5000 m above sea level, from the equator to the Arctic, spanning a wide range of environmental conditions. The order has notable taxonomic problems presenting significant difficulties for defining a species due to broad phenotypic variation, overlap of morphological characteristics, and relatively recent speciation events. At present, only the genomes of 2 species, the European rabbit (Oryctolagus cuniculus) and American pika (Ochotona princeps) have been sequenced and assembled. Starting from a paucity of genome information, the main scientific aim of the Lagomorph Genomics Consortium (LaGomiCs), born from a cooperative initiative of the European COST Action “A Collaborative European Network on Rabbit Genome Biology—RGB-Net” and the World Lagomorph Society (WLS), is to provide an international framework for the sequencing of the genome of all extant and selected extinct lagomorphs. Sequencing the genomes of an entire order will provide a large amount of information to address biological problems not only related to lagomorphs but also to all mammals. We present current and planned sequencing programs and outline the final objective of LaGomiCs possible through broad international collaboration.

QUALITY EVALUATION OF 'SUNBURST' CHERRIES HARVESTED AT DIFFERENT RIPENESS STAGES .

The sweet cherry ‘Sunburst’ is highly appreciated by consumers due to its organoleptic traits. Regional producers tend to harvest cherries sooner in order to increase their profits. With the aim of understanding the consequences of this we have tested the effect of different ripeness stages at the moment of harvesting on fruit quality. Quality parameters tested included external colour (L*, a*, b*), fruit texture, total soluble solids (TSS), and titratable acidity (TA). To evaluate nutritional quality total antioxidant activity was measured too. Once again, and in agreement with results obtained in previous studies, we conclude that there is no advantage in picking less ripe cherries.

Higher order model for analysis of magneto-electro-elastic plates

In this paper is presented an higher-order model for static and free vibration analyses of magneto-electro-elastic plates, wich allows the analysis of thin and thick plates, which allows the analysis of thin and thick plates. The finite element model is a single layer triangular plate/shell element with 24 degrees of fredom for the generalized mechanical displacements. Two degrees on freedom are introduced per each element layer, one corresponding to the electrical potential and the other for magnetic potential. Solutions are obtained for different laminations of the magneto-electro-elastic plate, as well as for the purely elastic plate as a special case.

Optimal dynamic control of laminated adaptive structures using a higher order model and a genetic algorithm

This paper deals with a finite element formulation based on the classical laminated plate theory, for active control of thin plate laminated structures with integrated piezoelectric layers, acting as sensors and actuators. The control is initialized through a previous optimization of the core of the laminated structure, in order to minimize the vibration amplitude. Also the optimization of the patches position is performed to maximize the piezoelectric actuator efficiency. The genetic algorithm is used for these purposes. The finite element model is a single layer triangular plate/shell element with 24 degrees of freedom for the generalized displacements, and one electrical potential degree of freedom for each piezoelectric element layer, which can be surface bonded or embedded on the laminate. To achieve a mechanism of active control of the structure dynamic response, a feedback control algorithm is used, coupling the sensor and active piezoelectric layers. To calculate the dynamic response of the laminated structures the Newmark method is considered. The model is applied in the solution of an illustrative case and the results are presented and discussed.

Accessing prospective early years’ teachers’ knowledge on fractions in order to design tasks for developing teachers’ MKT

Fractions is perhaps one of the most complex and difficult topics pupils explore in the early years of schooling. Difficulties in learning this topic may have its genesis in the fact that fractions comprise a multifaceted construct (Kieren, 1995) or can be conceived as being grounded in the instructional approaches employed to teach fractions (Behr, Harel, Post & Lesh, 1993). Thus, students’ limited understanding might be related to how their teachers understand and interpret fractions — it’s thus related with teachers’ knowledge and practice. Although there is a generalized agreement on teachers’ role on/for students learning, most research on fractions focus on students, leaving aside teachers’ role (and their knowledge on the topic). Thus, teachers’ training has in certain respects been left behind. We still know little about how teachers’ knowledge on fractions influences students’ broader view of mathematics, and its connection and evolution within and along schooling. Aimed at conceptualize ways of improving teachers’ knowledge, training and practices, it’s of fundamental importance to access the areas of knowledge (here conceived as mathematical knowledge for teaching (MKT) (Ball, Thames & Phelps, 2008) in which (prospective) teachers are more deficitaries.

Entwicklung von Verfahren zur visuellen Beurteilung von Stabilitätseigenschaften nichtlinearer, zeitdiskreter Systeme

In dieser Arbeit werden Verfahren zur visuellen Beurteilung von Stabilitätseigenschaften nichtlinearer, zeitdiskreter Systeme und mögliche Anwendungen vorgestellt. Ausgehend von den erforderlichen Grundbegriffen der Chaostheorie werden verschiedene Maße zur Detektion, Beschreibung und Visualisierung chaotischen Systemverhaltens motiviert, mathematisch definiert, physikalisch interpretiert und gedeutet: der Lyapunov Exponent, die Entropie, das Fourierspektrum und die Korrelation. Als erste Anwendung basierend auf diesen Gütemaßen wird das Verhalten von linearen und nichtlinearen rekursiven Systemen visualisiert und verglichen. Es zeigt sich, dass bei rekursiven linearen Systemen der Übergang von einem stabilen in einen instabilen oder chaotischen Zustand kontinuierlich erfolgt, während dieser Übergang bei nicht linearen Systemen häufig abrupt auftritt. Unter Verwendung der vorgestellten Visualisierung lässt sich sehr genau nachvollziehen, welche Parameter und insbesondere welche Parameterübergänge dabei kritisch sind. Diese Kenntnis ist sehr wichtig für eine störfreie Systemparametrierung und eine erforderliche Arbeitspunktsuche. In einer zweiten Anwendung wird chaotisches Systemverhalten als Generator optimal orthogonaler Signalfunktionen eingesetzt. Dazu wird die Rekursionsfolge in einem chaotischen Arbeitspunkt eines nichtlinearen rekursiven Systems als Musterfunktion eines statistischen Zufallsprozesses interpretiert: Je chaotischer das Systemverhalten und je kleiner die Varianz des Korrelationsmaßes desto besser können orthogonale Signalfolgen modelliert werden. Solche Signalfolgen sind von großer Bedeutung, wenn digitale Nachrichten über einen gestörten Kanal mit minimalem Daten- und Energieaufwand übertragen werden sollen. Als abschließendes Beispiel wird die fraktale Bildcodierung vorgestellt. Sie beruht nicht wie die klassischen Verfahren der Bildcodierung (Prädiktion, Transformation) auf statistischen Eigenschaften des Bildsignals sondern ausschließlich auf Selbstähnlichkeit. Die Bildpunkte eines Bildblockes werden nicht durch deren Grauwerte sondern durch ein Fraktal beschrieben, wobei dieses Fraktal durch eine kontraktive, affine Abbildung der Grauwertinformation dargestellt wird. Dieses Fraktal, d.h. diese Abbildungsvorschrift oder Gesetzmäßigkeit beschreibt die vollständige Information des Bildes. Durch die Anwendung dieser fraktalen Darstellung wird das codierte Bild aus beliebigen Bildern gleicher Größe generiert.

Executive order no. 87-27

This executive order by Governor Carroll A Campbell, Jr. orders an election be held in Woodford to elect a new city council member.

Higher order derivatives and norms of certain matrix functions

Tese de doutoramento, Matemática (Álgebra Lógica e Fundamentos), Universidade de Lisboa, Faculdade de Ciências, 2014

Synthesis and study of metallo-organic compounds for second-order NLO molecular switching

Tese de doutoramento, Química (Química Inorgânica), Universidade de Lisboa, Faculdade de Ciências, 2015

Effective-fourth-order resonator based MASH bandpass sigma-delta modulators

Two novel effective-fourth-order (eighth-order) resonator based MASH (MultistAge noise SHaping) bandpass Σ-Δ modulators are introduced at the behavioural level and subsequently examined by simulations utilising the ALTA SPW environment. The considered bandpass configurations have in their loop filter a cascade of standard second-order resonator structures in order to achieve appropriate noise shaping. The quantisation noise in each stage is suppressed by feeding the error of each section into the input of the following stage. It is demonstrated in this paper that the quadruple effective-first-order cascade configuration has significantly better performance as well as conforming more closely with theory in comparison with the effective-second-order effective-second-order cascade. The superior performance of the former can be attributed to the cumulative effect of the multi-bit outputs as well as the presence of more notch filters.

Consumers' perceptions of speciality foods and therural mail-order business

Many rural-based farm and food businesses are relatively small but successful companies. They face severe constraints in terms of finance, marketing and distribution. However, marketing food by mail order presents the opportunity for these firms to gain access to national or even international markets. The achievement of commercial success requires that these companies become marketing oriented. Thus, the critical issue for these firms is to identify the needs of existing or potential customers. The objectives of the paper are to establish a profile of the characteristics, behaviour and attitudes of mail order customers.