(Table 1) Conditions of vertical near-bottom profiling and the main parameters of the benthic boundary layer in several regions of the Black Sea shelf

Measurements of 14 vertical profiles of currents and hydrological parameters in the near-bottom layer with depth resolution of 0.1 m were carried out in several regions of the Black Sea shelf, at five points over the continental slope, and in three deep water regions. The upper boundary of the benthic boundary layer (BBL) was reliably determined at a point at distance from 5-7 to 35-40 m from the bottom where the gradients of density and current velocity changed. Experimental data obtained were used to determine the coefficient of bottom friction, friction velocity, coefficients of vertical diffusion of momentum and density, and vertical fluxes of temperature and salinity in the BBL.

Vertical profiles of environmental parameters measured on discrete water samples collected with Niskin bottles during the Tara Oceans expedition 2009-2013

The present data publication provides permanent links to original and updated versions of validated data files. The data files include properties of seawater, particulate matter and dissolved matter that were measured from discrete water samples collected with Niskin bottles during the 2009-2013 Tara Oceans expedition. Properties include pigment concentrations from HPLC analysis (10 depths per vertical profile, 25 pigments per depth), the carbonate system (Surface and 400m; pH (total scale), CO2, pCO2, fCO2, HCO3, CO3, Total alkalinity, Total carbon, OmegaAragonite, OmegaCalcite, and dosage Flags), nutrients (10 depths per vertical profile; NO2, PO4, N02/NO3, SI, quality Flags), DOC, CDOM, and dissolved oxygen isotopes. The Service National d'Analyse des Paramètres Océaniques du CO2, at the Université Pierre et Marie Curie, determined CT and AT potentiometrically (Edmond 1970; DOE 1994) on samples preserved according to Dickson et al. (2007). More than 250 vertical profiles of these properties were made across the world ocean. DOC, CDOM and dissolved oxygen isotopes are available only for the Arctic Ocean and Arctic Seas (2013).

Development of the DEPLOY computer math model for the investigation of various airbag and crash parameters on the out-of-position occupant. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

An economical algorithm for the solution of elliptic difference equations independent of user-supplied parameters,

Extra t.p., with thesis statement, inserted.

Numerical studies of Stone's symmetric factorization and the iteration parameters, and [tau].

Thesis (M.S.)--University of Illinois.

Preliminary criteria for the fracture control of space shuttle structures.

"Compiling, integrating, and editing of the document were performed by the Design Criteria Program Office of the McDonnell Douglas Astronautics Company under the direction of the Langley Research Center's Structural Systems Office (SSO)."

The electrical admittance of a homogeneous polarized fully electroded circular disc, loss-less and mechanically free : analysis, including Rayleigh correction, data for routine determination of elastic modulus and Piezoelectric coupling, and discussion of limitation of correction, anisotrophy parameters involved, and deductions concerning dimensional standarization /

"ONR Contract No. Nonr-1055(00)."

Statistical-physical models of man-made and natural radio noise : part IV, Determination of the first-order parameters of class A and B interference /

Issued Sept. 1978.

Habitat parameters of the Hine's Emerald Dragonfly : using temperatures loggers to assess hydrological regime in wetlands supporting the larval states, Lockport Prairie section 206 project, final report /

"Submitted to: the U.S. Fish and Wildlife Service" -- cover

Using estimates of income and substitution parameters to predict the work incentive effects of various income maintenance programs : a brief exposition and partial survey of the empirical literature /

Bibliography: leaves [7-9] (2d group).

Life history parameters and biocontrol potential of the mealybug parasitoid Coccidoxenoides peregrinus (Timberlake) (Hymenoptera: Encyrtidae): Asexuality, fecundity and ovipositional patterns

Properties relevant to the ovipositional activity and lifetime productivity of Coccidoxenoides peregrinus (Timberlake) were assessed in the laboratory, to determine the potential of this species as a biocontrol agent against the citrus mealybug, Planococcus citri (Risso). In general, this species has not performed well in orchards, except for a few localities on different continents. The mode of reproduction of C peregrinus is almost entirely thelytokous, with males produced sporadically and at low frequency. The females have both pro-ovigenic and synovigenic traits, which raises questions of the utility of this distinction. The females have a high reproductive potential with 10-20 eggs per day available within the first two days (after a short (12 h) pre-oviposition period), and 80-150 eggs per day thereafter until death at about eight days. Mean lifetime fecundity was 239.2 +/- 34.3 eggs. C peregrinus oviposits across a range of P. citri instars, but productivity relies predominantly on second instar hosts. Second stage (N2) hosts received most eggs in choice (about 52%) and no-choice (about 50%) tests. Most eggs deposited into N2 hosts (82%) reached adult stage whereas only a few of those deposited into N1 and N3 (about 5% each) developed successfully. The haemolymph of parasitised reproductive mealybugs contained granular structures and no parasitoid eggs were found 24 h after exposure to ovipositing wasps. Also, no wasps emerged from parasitised adult hosts that were kept alive. Parasitoid eggs deposited into adult hosts were presumed encapsulated and destroyed, as control mealybugs (not exposed to female wasps) had no granular structures in their haemolymph. Wasps exposed to an abundance of hosts soon started ovipositing, but only for a relatively short time each day (about 2.5 h out of a 7 h exposure). They stopped ovipositing despite eggs judged to be mature in their ovaries. The reproductive output of C peregrinus is discussed in relation to the ecological factors that could influence this output, and the implications for biocontrol are discussed. (C) 2003 Elsevier Inc. All rights reserved.

Contribution of the collagen I alpha 1 and vitamin D receptor genes to the risk of hip fracture in elderly women

Context and Objective: Hip fracture is partially genetically determined. The present study was designed to examine the contributions of vitamin D receptor (VDR) and collagen I alpha 1 (COLIA1) genotypes to the liability to hip fracture in postmenopausal women. Design: The study was designed as a prospective population-based cohort investigation. Subjects: Six hundred seventy-seven postmenopausal women of Caucasian background, aged 70 +/- 7 yr (mean +/- SD), have been followed for up to 14 yr. Sixty-nine women had sustained a hip fracture during the period. Main Outcome: Atraumatic hip fractures were prospectively identified through radiologists' reports. Bone mineral density (BMD) at the hip and lumbar spine was measured by dual-energy x-ray absorptiometry. Genotypes: The TaqI and SpI COLIA1 polymorphisms of the VDR and COLIA1 genes were determined. Using the Single Nucleotide Polymorphism database, VDR TT, Tt, and tt genotypes were coded as TT, TC, and CC, whereas COLIA1 SS, Ss, and ss were coded as GG, GT, and TT. Results: Women with VDR CC genotype (16% prevalence) and COLIA1 TT genotype (5% prevalence) had an increased risk of hip fracture [odds ratio (OR) associated with CC, 2.6; 95% confidence interval (CI), 1.2-5.3; OR associated with TT, 3.8; 95% CI, 1.3-10.8] after adjustment for femoral neck BMD (OR, 3.4 per SD; 95% CI, 2.3-5.0) and age (OR, 1.4 per 5 yr; 95% CI, 1.1-1.7). Approximately 20 and 12% of the liability to hip fracture was attributable to the presence of the CC genotype and TT genotype, respectively. Conclusion: The VDR CC genotype and COLIA1 TT genotype were associated with increased hip fracture risk in Caucasian women, and this association was independent of BMD and age.

Optimization of slitlike carbon nanopores for storage of hythane fuel at ambient temperatures

Carbons with slitlike pores can serve as effective host materials for storage of hythane fuel, a bridge between the petrol combustion and hydrogen fuel cells. We have used grand canonical Monte Carlo simulation for the modeling of the hydrogen and methane mixture storage at 293 K and pressure of methane and hydrogen mixture up to 2 MPa. We have found that these pores serve as efficient vessels for the storage of hythane fuel near ambient temperatures and low pressures. We find that, for carbons having optimized slitlike pores of size H congruent to 7 angstrom ( pore width that can accommodate one adsorbed methane layer), and bulk hydrogen mole fraction >= 0.9, the volumetric stored energy exceeds the 2010 target of 5.4 MJ dm(-3) established by the U. S. FreedomCAR Partnership. At the same condition, the content of hydrogen in slitlike carbon pores is congruent to 7% by energy. Thus, we have obtained the composition corresponding to hythane fuel in carbon nanospaces with greatly enhanced volumetric energy in comparison to the traditional compression method. We proposed the simple system with added extra container filled with pure free/adsorbed methane for adjusting the composition of the desorbed mixture as needed during delivery. Our simulation results indicate that light slit pore carbon nanomaterials with optimized parameters are suitable filling vessels for storage of hythane fuel. The proposed simple system consisting of main vessel with physisorbed hythane fuel, and an extra container filled with pure free/adsorbed methane will be particularly suitable for combustion of hythane fuel in buses and passenger cars near ambient temperatures and low pressures.

Finite deformation model of simple shear of fault with microrotations: apparent strain localisation and en-echelon fracture pattern

Strain localisation is a widespread phenomenon often observed in shear and compressive loading of geomaterials, for example, the fault gouge. It is believed that the main mechanisms of strain localisation are strain softening and mismatch between dilatancy and pressure sensitivity. Observations show that gouge deformation is accompanied by considerable rotations of grains. In our previous work as a model for gouge material, we proposed a continuum description for an assembly of particles of equal radius in which the particle rotation is treated as an independent degree of freedom. We showed that there exist critical values of the model parameters for which the displacement gradient exhibits a pronounced localisation at the mid-surface layers of the fault, even in the absence of inelasticity. Here, we generalise the model to the case of finite deformations characteristic for the gouge deformation. We derive objective constitutive relationships relating the Jaumann rates of stress and moment stress to the relative strain and curvature rates, respectively. The model suggests that the pattern of localisation remains the same as in the linear case. However, the presence of the Jaumann terms leads to the emergence of non-zero normal stresses acting along and perpendicular to the shear layer (with zero hydrostatic pressure), and localised along the mid-line of the gouge; these stress components are absent in the linear model of simple shear. These additional normal stresses, albeit small, cause a change in the direction in which the maximal normal stresses act and in which en-echelon fracturing is formed.