Ultrabroad infrared luminescences from Bi-doped alkaline earth metal germanate glasses

We report on ultrabroad infrared (IR) luminescences covering the 1000-1700-nm wavelength region, from Bi-doped 75GeO(2) 20RO-5Al(2)O(3) 1B(2)O(3) (R = Sr, Ca, and Mg) glasses. The full width at half-maximum of the IR luminescences excited at 980 nm increases (315 -> 440 -> 510 nm) with the change of alkaline earth metal (Mg2+ -> Ca2+ -> Sr2+). The fluorescence lifetime of the glass samples is 1725, 157, and 264 mu s when R is Sr, Ca, and Mg, respectively. These materials may be promising candidates for broad-band fiber amplifiers and tunable laser resources.

Host dependent thermal stability and frequency upconversion of Er3+-doped heavy metal oxyfluoride germanate glasses

The upconversion properties of Er3+-doped heavy metal oxyfluoride germanate glasses under 975 nm excitation have been investigated. The intense green (551 and 529 nm) and relatively weak red (657 nm) emissions corresponding to the transitions S-4(3/2) -> I-4(15/2), H-2(11/2) -> I-4(15/2) and F-4(9/2) -> I-4(15/2), respectively, were simultaneously observed at room temperature. The content of PbF2 has an important influence on the upconversion luminescence emission. With increasing content of PbF2, the intensities of green (529 nm) and red (657 nm) emissions increase slightly, while the green emission (551 nm) increases markedly. These results suggest that PbF2 has an influence on the green (551 nm) emission more than on the green (529 nm) and red (657 nm) emissions.

Investigation of the effect of fluoride ions introduction on structural, OH- content and up-conversion luminescence properties in Er3+-doped heavy metal oxide glasses

Effect of fluoride ions introduction on structural, OH- content and up-conversion luminescence properties in Er3+-doped heavy metal oxide glasses have been investigated. Structure was investigated, indicating that fluoride has an important influence on the phonon density, maximum phonon energy of host glasses. With increasing fluoride content, the up-conversion luminescence intensity and quantum efficiencies increase notably, which could not be explained only by the maximum phonon energy change of host glasses. Our results show that, with the introduction of PbF2, the decrease of phonon density and OH- content contributes more to the enhanced up-conversion emissions than that of maximum phonon energy. (c) 2005 Elsevier B.V. All rights reserved.

Efeito da 1,10-fenantrolina e seus derivados complexados em metal na atividade proteolítica de Leishmania braziliensis

Leishmanioses são um grupo de doenças com um largo espectro de manifestações clínicas, as quais variam desde lesões cutâneas até o envolvimento visceral severo, podendo levar ao óbito. A leishmaniose é, ainda hoje, uma doença negligenciada, estando entre os agravos prioritários do programa de pesquisa sobre doenças da pobreza da Organização Mundial da Saúde (OMS). Além de não haver vacinas disponíveis, a terapia é baseada em medicamentos injetáveis que causam sérios efeitos colaterais, tornando o tratamento inviável para muitos países endêmicos. Drogas derivadas de metal representam um novo arsenal terapêutico antimicrobiano e anti-câncer. Os inibidores de peptidase/agentes quelantes tais como 1,10-fenantrolina e seus derivados, no estado livre de metal ou como ligantes com metais de transição, interferem com a função de vários sistemas biológicos. Em trabalhos anteriores, nosso grupo descreveu que o parasito L. braziliensis produziu moléculas gp63 sensíveis a 1,10-fenantrolina. No presente trabalho, demonstramos a distribuição celular da molécula gp63 em uma cepa virulenta de L. braziliensis por meio de análises bioquímicas e imuno-histoquímica. Depois disso, relatamos os efeitos inibitórios de três compostos derivados da 1,10-fenantrolina, 1,10-fenantrolina-5,6-diona (phendio), [Cu(phendio)2] e [Ag(phendio)2], nas atividades metalopeptidases celulares e extracelulares produzidas por promastigotas de L. braziliensis, bem como as suas ações sobre a viabilidade do parasita e na interação com as células de macrófagos murinos. As moléculas gp63 foram detectadas em compartimentos de parasitos, incluindo membrana citoplasmatica e bolsa flagelar. O tratamento de promastigotas de L. braziliensis durante 1 hora com 1,10-fenantrolina e seus derivados resultou numa inibição significativa da viabilidade celular e mostrou um mecanismo de ação irreversível. Estes inibidores de metalopeptidases induziram apoptose em promastigotas de L. braziliensis, demonstrada através da marcação com anexina/iodeto de propídio e ensaio TUNEL. O pré-tratamento de promastigotas com os inibidores de metalopeptidases induziram uma diminuição na expressão de moléculas de superfície gp63, assim como uma redução significativa no índice de associação com macrófagos. Em paralelo, macrófagos infectados com L. braziliensis e tratados com 1,10-fenantrolina e seus derivados promoveram uma potente redução sobre o número de amastigotas intracelulares. O tratamento de macrófagos com 1,10-fenantrolina e seus derivados não induziram o aumento de óxido nítrico. A ação combinatória sobre a capacidade de crescimento entre os compostos derivados da 1,10-fenantrolina e Glucantime, quando ambos foram utilizados em concentracões sub-inibidoras, também foi observada. In vivo os compostos derivados da 1,10-fenantrolina e seus drivados foram capazes de controlar o tamanho das lesões a partir da terceira semana de tratamento em relação ao controle não tratado em hamsters infectados quando administrado por via intraperitoneal. Os animais tratados com os compostos apresentaram maior resposta intradérmica (DTH) aos antígenos de L. braziliensis. Coletivamente, a 1,10-fenantrolina e seus derivados metálicos apresentam uma nova perspectiva de estudos para o desenvolvimento de novos fármacos anti-L. braziliensis

Structural and up-conversion luminescence properties in Tm (3+)/Yb3+-codoped heavy metal oxide-halide glasses

Tm3+/Yb3+-codoped heavy metal oxide-halide glasses have been synthesized by conventional melting and quenching method. Structural properties were obtained based on the Raman spectra, indicating that halide ion has an important influence on the phonon density and maximum phonon energy of host glasses. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions (1)G(4) -> H-3(6) and (1)G(4) -> H-3(4), respectively, were observed at room temperature. The possible up-conversion mechanisms are discussed and estimated. With increasing halide content, the up-conversion luminescence intensity and blue luminescence lifetimes of Tm3+ ion increase notably. Our results show that with the substitution of halide ion for oxygen ion, the decrease of phonon density and maximum phonon energy of host glasses both contribute to the enhanced up-conversion emissions. (c) 2005 Elsevier B.V. All rights reserved.

Effect of various alkaline-earth metal oxides on the broadband infrared luminescence from bismuth-doped silicate glasses

We report on the effect of various alkaline-earth metal oxides on the broadband infrared luminescence covering 1000-1600 nm wavelength region from bismuth-doped silicate glasses. The full width at half maximum (FWHM) of the infrared luminescence and the fluorescent lifetime is more than 200 nm and 400 mu s, respectively. The fluorescent intensity decreases with increasing basicity of host glasses. Besides the broadband infrared luminescence, luminescence centered at 640 nm was also observed, which should be ascribed to Bi2+ rather than to the familiar Bi3+. We suggest that the infrared luminescence should be assigned to the X-2 (2)Pi (3/2) -> X-1 (2)Pi(1/2) transition of BiO molecules dispersed in the host glasses. (c) 2006 Elsevier Ltd. All rights reserved.

UV-blue upconverted emission from Nd3+-doped InF3-based heavy-metal fluoride glasses for blue upconversion fibre laser

We report spectral properties and thermal stability of Nd3+-doped InF3-based heavy-metal fluoride glasses. Fluoroindate glasses in the chemical compositions (in mol%) of (38-x)InF3-16BaF(2)-20ZnF(2)-20SrF(2)-3GdF(3)-1GaF(3-)2NaF-xNdF(3) (x = 0.1, 0.5, 1, 2, 3) have been prepared under a controlled atmosphere in a dry box. Strong UVblue upconversion emission from a green excitation wavelength has been observed and the involved mechanisms have been explained. Near-infrared emission occurs simultaneously upon excitation of the UV-blue upconversion emissions with a cw Ar(+)laser. The upconversion spectra have revealed four dominant emissions at 354, 380, 412 and 449 nm, which belong to the transitions of D-4(3/2) -> I-4(9/2), D-4(3/2) -> I-4(11/2) and P-2(3/2) -> I-4(9/2), D-4(3/2) -> I-4(13/2) and P-2(3/2) -> I-4(11/2), D-4(3/2) -> I-4(15/2) and P-2(3/2) -> I-4(13/2), respectively.

Effects of chloride substitution on the chemical and physical properties and the crystallization behavior in heavy metal fluoride glasses

Effect of the substitutions of chloride for fluoride on the chemical and physical properties and the crystallization behavior in heavy metal fluoride glasses has been investigated. The characteristic temperature of the glass does not changed obviously when the fluoride was taken place by chloride. Compared with samples of being free of ErF3, the doping samples are more inclined to be surface crystallization. Optical basicity in the glass system increases with increasing the negative charge provided by the chloride atoms and the absorption peak red shifted is observed in absorption spectra. XRD measurements show that not a single crystalline phase appears in the heated glass samples, which indicate the substitutions of chloride for fluoride with a variety of crystalline precipitation trends. (c) 2007 Elsevier B.V All rights reserved.

Geomicrobiology of meromictic, metal-mine pit lakes in the Iberian Pyrite Belt and biotechnological applications

220 p.

SupraMOFs: Supramolecular porous materials assembled from metal-nucleobase discrete entities

289 p.

Direct writing computer-generated holograms on metal film by an infrared femtosecond laser

Writing computer-generated holograms has been achieved by using near infrared femtosecond laser selective ablation of metal film deposited on glass substrate. The diffraction features with data reconstruction of fabricated computer-generated holograms were evaluated. Both transmission and reflection holograms can be fabricated in a single process. The process required no mask, no pre- or post-treatment of the substrate. (C) 2005 Optical Society of America.

Formation of arrayed holes on metal foil and metal film by multibeam interfering femtosecond laser beams

We report on an optical interference method to fabricate arrayed holes on metal nickel foil and aluminum film deposited on glass substrate by means of five-beam interference of femtosecond laser pulses. Optical microscope and scanning electron microscope observations revealed that arrayed holes of micrometre-order were fabricated on both metal foil and metal film. The present technique allows one-step, large-area, micrometric processing of metal materials for potential industrial applications.