Evaluation of the impact of natural enemies on Plutella xylostella L. (Lepidoptera: Yponomeutidae) populations on commercial Brassica farms

1 Accurate assessment of the impact of natural enemies on pest populations is fundamental to the design of robust integrated pest management programmes. In most situations, diseases, predators and parasitoids act contemporaneously on insect pest populations and the impact of individual natural enemies, or specific groups of natural enemies, is difficult to interpret. These problems are exacerbated in agro-ecosystems that are frequently disrupted by the application of insecticides. 2 A combination of life-table and natural enemy exclusion techniques was utilized to develop a method for the assessment of the impact of endemic natural enemies on Plutella xylostella populations on commercial Brassica farms. 3 At two of the experimental sites, natural enemies had no impact on P. xylostella survival, at two other sites, natural enemy impact was low but, at a fifth site, natural enemies drastically reduced the P. xylostella population. 4 The calculation of marginal death rates and associated k-values allowed the comparison of mortality factors between experimental sites, and indicated that larval disappearance was consistently the most important mortality factor, followed by egg disappearance, larval parasitism and pupal parasitism. The appropriateness of the methods and assumptions made to calculate the marginal death rates are discussed. 5 The technique represents a robust and easily repeatable method for the analysis of the activity of natural enemies of P. xylostella, which could be adapted for the study of other phytophagous pests.

Induction and transmission of Bacillus thuringiensis tolerance in the flour moth Ephestia kuehniella

The use of Bacillus thuringiensis (Bt) endotoxins to control insect vectors of human diseases and agricultural pests is threatened by the possible evolution of resistance in major pest species. In addition to high levels of resistance produced by receptor insensitivity (5, 16, 17), several cases of tolerance to low to medium levels of toxin have been reported in laboratory colonies of lepidopteran species (3, 18). Because the molecular basis of some of these cases of tolerance to the toxin are not known, we explored alternative mechanisms. Here, we present evidence that tolerance to a Bt formulation in a laboratory colony of the flour moth Ephestia kuehniella can be induced by preexposure to a low concentration of the Bt formulation and that the tolerance correlates with an elevated immune response. The data also indicate that both immune induction and Bt tolerance can be transmitted to offspring by a maternal effect and that their magnitudes are determined by more than one gene.

The role of insect cell lines in an artificial diet for the parasitold wasp, Trichogramma pretiosum

Trichogramma species are mass-produced for biological control using host eggs. Artificial diets have been developed to reduce production costs, however, most include insect haemolymph as a major component, which still results in a significant expense. Medium conditioned with insect cell lines has produced some success as a haemolymph replacement in artificial diets for several parasitoid wasp species. Trichogramma australicum Girault (Hymenoptera: Trichogrammatidae) was the first species to develop successfully to the adult stage on diets containing concentrated HeliothiS zea (Boddie) (Lepidoptera: Noctuidae) cells. Tricho-gramma pretiosum Riley (Hymenoptera: Trichogrammatidae) was subsequently grown to the adult stage on a similar cell line diet. This success encouraged a systematic investigation into the use of insect cell lines in Trichogramma artificial diets. We compared the effect of diets containing insect cells with diets containing conditioned cell line media. Diets containing insect cells produced significantly more pupae than diets containing conditioned medium and, although not significant, produced a higher number of adults. Second, we compared the effect of diets containing cell lines established from ovary-associated tissue of H. zea and embryo tissue of Aedes albopictus (Skuse) (Diptera: Culicidae) on T pretiosum development. Trichogramma pretiosum development was not significantly different on diets containing cells from the two origins and tissue types. Third, the effect of cell storage on T pretiosum development was observed. HeliothiS zea cells in medium were stored at 4 degrees C and room temperature (22 degrees C for one, two, four and seven days before addition to artificial diets. Cell viability was calculated for these storage treatments. HeliothiS zea cells could be stored at 4 degrees C for up to seven days with no detrimental effect on T pretiosum development. Tricho-gramma pretiosum development did not depend on cell viability. The use of insect cell lines as a haemolymph replacement has the potential to significantly reduce production costs and simplify Trichogramma artificial diets with the eventual aim of replacing host production in mass rearing facilities. (c) 2005 Elsevier Inc. All rights reserved.

Discrimination among host plants (Leucaena species and accessions) by the psyllid pest Heteropsylla cubana and implications for understanding resistance

1 The herbivorous bug Heteropsylla cubana Crawford (Homoptera: Psyllidae) is a pest of the cattle fodder crop Leucaena (Leguminosae: Mimosoideae). The interaction between the psyllid and three varieties of its Leucaena host plant was investigated in relation to the apparent resistance of some Leucaena varieties (Leucaena leucocephala, Leucaena pallida and their hybrids) to attack. 2 Field trials demonstrated that adult psyllids distinguished among the different varieties of Leucaena over a distance, and were attracted to L. leucocephala in significantly higher numbers than to L. pallida or to the hybrid. Pesticide treatment increased the attractiveness of Leucaena plants, even of those deemed to be psyllid resistant. Numbers of psyllid eggs and nymphs, sampled in the field, reflect the arrival rates of adults at the three plant varieties. 3 Wavelength reflectance data of the three Leucaena varieties were not significantly different from one another, suggesting that psyllids cannot discriminate among the three plants using brightness or wavelength cues. There was a differential release of caryophyllene among the three varieties. Release of caryophyllene in L. leucocephala and the hybrid appeared to be influenced by environmental conditions. 4 Experiments demonstrated that caryophyllene (at least on its own) did not influence the behaviour of leucaena psyllids in relation to leucaena plants. 5 The results suggest that host plant volatiles cannot be dismissed as significant in the interaction between the leucaena psyllid and its Leucaena host plants. Further avenues for investigation are recommended and these are related to novel ways of understanding resistance in insect plant inter-relationships.

Influence of Observer Presence on Pacific Damsel Bug Behavior: Who is Watching Whom?

When direct observations are used to study animal behavior the presence of the observer may alter the animal and hence influence the data being collected, yet few studies have quantified this effect. We conducted direct observation studies in the glasshouse to assess the relative influence of observer presence on the behavior of Pacific damsel bugs, Nabis kinbergii, a potentially important predator of crop pests. Comparisons of predator activity, predator distribution, prey (Helicoverpa armigera) mortality and prey distribution between frequently observed and minimally observed treatments, during diurnal and nocturnal observation sessions showed that the frequency of observer presence had no apparent impact on Pacific damsel bug behavior. This is the first documented test of the impact of observer presence in an insect system. To place our results in context, we reviewed 15 papers on the influence of observer presence in a range of animals. We established that just over half of these papers found evidence for an effect. Nevertheless, direct observations should be useful in further studies of Pacific damsel bug behavior, and researchers using direct observations to study the behavior of other animals should be cognizant of observer effects during design and interpretation of their study.

Are insect immune suppressors driving cellular uptake reactions?

Many insect parasitoids that deposit their eggs inside immature stages of other insect species inactivate the cellular host defence to protect the growing embryo from encapsulation. Suppression of encapsulation by polydnavirus-encoded immune-suppressors correlates with specific alterations in hemocytes, mainly cytoskeletal rearrangements and actin-cytoskeleton breakdown. We have previously shown that the Cotesia rubecula polydnavirus gene product CrV1 causes immune suppression when injected into the host hemocoel. CrV1 is taken up by hemocytes although no receptors have been found to bind the protein. Instead CrV1 uptake depends on dimer formation, which is required for interacting with lipophorin, suggesting a CrV1-lipophorin complex internalisation by hemocytes. Since treatment of hemocytes with oligomeric lectins and cytochalasin D can mimic the effects of CrV1, we propose that some dimeric and oligomeric adhesion molecules are able to cross-link receptors on the cell surface and depolymerise actin by leverage-mediated clearance reactions in the hemolymph.

Ecology of Leptocoris Hahn (Hemiptera: Rhopalidae) Soapberry Bugs in Australia

Soapberry bugs are worldwide seed predators of plants in the family Sapindaceae. Australian sapinds are diverse and widespread, consisting of about 200 native trees and shrubs. This flora also includes two introduced environmental weeds, plus cultivated lychee (Litchi chinensis Sonn.), longan (Dimocarpus longan Lour.) and rambutan (Nephelium lappaceum L.). Accordingly, Australian soapberry bugs may be significant in ecology, conservation and agriculture. Here we provide the first account of their ecology. We find five species of Leptocoris Hahn in Australia, and list sapinds that do and do not serve as reproductive hosts. From museum and field records we map the continental distributions of the insects and primary hosts. Frequency of occupation varies among host species, and the number of hosts varies among the insects. In addition, differences in body size and beak length are related to host use. For example, the long-beaked Leptocoris tagalicus Burmeister is highly polyphagous in eastern rainforests, where it occurs on at least 10 native and non-native hosts. It aggregates on hosts with immature fruit and commences feeding before fruits dehisce. Most of its continental range, however, matches that of a single dryland tree, Atalaya hemiglauca F. Muell., which has comparatively unprotected seeds. The taxon includes a smaller and shorter-beaked form that is closely associated with Atalaya, and appears to be taxonomically distinct. The other widespread soapberry bug is the endemic Leptocoris mitellatus Bergroth. It too is short-beaked, and colonises hosts phenologically later than L. tagalicus, as seeds become more accessible in open capsules. Continentally its distribution is more southerly and corresponds mainly to that of Alectryon oleifolius Desf. Among all host species, the non-native environmental weeds Cardiospermum L. and Koelreuteria Laxm. are most consistently attacked, principally by L. tagalicus. These recent host shifts have biocontrol implications. In contrast, the sapinds planted as fruit crops appear to be less frequently used at present and mainly by the longer-beaked species.

Ultraconserved elements in insect genomes: A highly conserved intronic sequence implicated in the control of homothorax mRNA splicing

Recently, we identified a large number of ultraconserved (uc) sequences in noncoding regions of human, mouse, and rat genomes that appear to be essential for vertebrate and amniote ontogeny. Here, we used similar methods to identify ultraconserved genomic regions between the insect species Drosophila melanogaster and Drosophila pseudoobscura, as well as the more distantly related Anopheles gambiae. As with vertebrates, ultraconserved sequences in insects appear to Occur primarily in intergenic and intronic sequences, and at intron-exon junctions. The sequences are significantly associated with genes encoding developmental regulators and transcription factors, but are less frequent and are smaller in size than in vertebrates. The longest identical, nongapped orthologous match between the three genomes was found within the homothorax (hth) gene. This sequence spans an internal exon-intron junction, with the majority located within the intron, and is predicted to form a highly stable stem-loop RNA structure. Real-time quantitative PCR analysis of different hth splice isoforms and Northern blotting showed that the conserved element is associated with a high incidence of intron retention in hth pre-mRNA, suggesting that the conserved intronic element is critically important in the post-transcriptional regulation of hth expression in Diptera.

Properties of a unique mutant of Helicoverpa armigera single-nucleocapsid nucleopolyhedrovirus that exhibits a partial many polyhedra and few polyhedra phenotype on extended serial passaging in suspension cell cultures

Serial passaging of wild-type Helicoverpa armigera, single-nucleocapsid (HaSNPV) in H. zea (HzAMI) illsect Cell Cultures results ill rapid selection for the few polyhedra (FP) phenotype. A unique HaSNPV mutant (ppC19) was isolated through plaque purification that exhibited a partial many polyhedra (MP) and FP phenotype. Oil serial passaging in suspension cell cultures, ppC19 produced fivefold more polyhedra than a typical FP mutant (FP8AS) but threefold less polyhedra than the wild-type virus. Most importantly, the polyhedra of ppC19 exhibited MP-like virion occlusion. Furthermore, ppC19 produced the same amount of budded virus (BV) as the FP mutant, which was fivefold higher than that of the wild-type virus. This selective advantage was likely to explain its relative stability in polyhedra production for six passages when compared with the wild-type Virus. However, subsequent passaging of ppC19 resulted in a steel) decline in both BV and polyhedra yields, which was also experienced by FP8AS and the wild-type virus Lit high passage numbers. Genomic deoxyribonueleic Licid profiling of the latter suggested that defective interfering particles (DIPS) were implicated in this phenomenon and represented another Undesirable mutation during serial passaging of HaSNPV Hence, a strategy to isolate HaSNPV Clones that exhibited MP-like polyhedra production but FP-like BV production, coupled with low multiplicities of infection during scale-up to avoid accumulation of DIPS, could prove commerically invaluable.

Is the distribution of Fiji leaf gall in Australian sugarcane explained by variation in the vector Perkinsiella saccharicida?

Fiji leaf gall (FLG) is an important virally induced disease in Australian sugarcane. It is confined to southern canegrowing areas, despite its vector, the delphacid planthopper Perkinsiella saccharicida, occurring in all canegrowing areas of Queensland and New South Wales. This disparity between distributions could be a result of successful containment of the disease through quarantine and/or geographical barriers, or because northern Queensland populations of Perkinsiella may be poorer vectors of the disease. These hypotheses were first tested by investigating variation in the ITS2 region of the rDNA fragment among eastern Australian and overseas populations of Perkinsiella. The ITS2 sequences of the Western Australian P. thompsoni and the Fijian P. vitiensis were distinguishable from those of P. saccharicida and there was no significant variation among the 26P. saccharicida populations. Reciprocal crosses of a northern Queensland and a southern Queensland population of P. saccharicida were fertile, so they may well be conspecific. Single vector transmission experiments showed that a population of P. saccharicida from northern Queensland had a higher vector competency than either of two southern Queensland populations. The frequency of virus acquisition in the vector populations was demonstrated to be important in the vector competency of the planthopper. The proportion of infected vectors that transmitted the virus to plants was not significantly different among the populations tested. This study shows that the absence of FLG from northern Queensland is not due to a lack of vector competency of the northern population of P. saccharicida.

Structure and ultrastructure of the silk glands and spinneret of Helicoverpa armigera (Hubner) (Lepidoptera : Noctuidae)

This study provides comprehensive documentation of silk production in the pest moth Helicoverpa armigera from gland secretion to extrusion of silk thread. The structure of the silk glands, accessory structures and extrusion apparatus are reported. The general schema of the paired silk glands follows that found for Lepidoptera. Morphology of the duct, silk press, muscle attachments and spigot are presented as a three-dimensional reconstruction and the cuticular crescent-shaped profile of the silk press is demonstrated in both open and closed forms with attendant muscle blocks, allowing advances in our knowledge of how the silk press functions to regulate the extrusion of silk. Growth of the spigot across instars is documented showing a distinctive developmental pattern for this extrusion device. Its shape and structure are related to use and load-bearing activity. (c) 2005 Elsevier Ltd. All rights reserved.

Postharvest characteristics and handling of litchi fruit - an overview

Litchi ( Litchi chinensis Sonn.) is a tropical to subtropical crop that originated in South-East Asia. Litchi fruit are prized on the world market for their flavour, semi-translucent white aril and attractive red skin. Litchi is now grown commercially in many countries and production in Australia, China, Israel, South Africa and Thailand has expanded markedly in recent years. Increased production has made significant contributions to economic development in these countries, especially those in South-East Asia. Non-climacteric litchi fruit are harvested at their visual and organoleptic optimum. They are highly perishable and, consequently, have a short life that limits marketability and potential expansion of demand. Pericarp browning and pathological decay are common and important defects of harvested litchi fruit. Postharvest technologies have been developed to reduce these defects. These technologies involve cooling and heating the fruit, use of various packages and packaging materials and the application of fungicides and other chemicals. Through the use of fungicides and refrigeration, litchi fruit have a storage life of about 30 days. However, when they are removed from storage, their shelf life at ambient temperature is very short due to pericarp browning and fruit rotting. Low temperature acclimation or use of chitsoan as a coating can extend the shelf life. Sulfur dioxide fumigation effectively reduces pericarp browning, but approval from Europe, Australia and Japan for this chemical is likely to be withdrawn due to concerns over sulfur residues in fumigated fruit. Thus, sulfur-free postharvest treatments that maintain fruit skin colour are increasingly important. Alternatives to SO2 fumigation for control of pericarp browning and fruit rotting are pre-storage pathogen management, anoxia treatment, and dipping in 2% hydrogen chloride solution for 6-8 min following storage at 0 degrees C. Insect disinfestation has become increasingly important for the expansion of export markets because of quarantine issues associated with some fruit fly species. Thus, effective disinfestation protocols need to be developed. Heat treatment has shown promise as a quarantine technology, but it injures pericarp tissue and results in skin browning. However, heat treatment can be combined with an acid dip treatment that inhibits browning. Therefore, the primary aim of postharvest litchi research remains the achievement of highly coloured fruit which is free of pests and disease. Future research should focus on disease control before harvest, combined acid and heat treatments after harvest and careful temperature management during storage and transport.