The use of the boundary element method in the analysis of single lap joints

The most common techniques for stress analysis/strength prediction of adhesive joints involve analytical or numerical methods such as the Finite Element Method (FEM). However, the Boundary Element Method (BEM) is an alternative numerical technique that has been successfully applied for the solution of a wide variety of engineering problems. This work evaluates the applicability of the boundary elem ent code BEASY as a design tool to analyze adhesive joints. The linearity of peak shear and peel stresses with the applied displacement is studied and compared between BEASY and the analytical model of Frostig et al., considering a bonded single-lap joint under tensile loading. The BEM results are also compared with FEM in terms of stress distributions. To evaluate the mesh convergence of BEASY, the influence of the mesh refinement on peak shear and peel stress distributions is assessed. Joint stress predictions are carried out numerically in BEASY and ABAQUS®, and analytically by the models of Volkersen, Goland, and Reissner and Frostig et al. The failure loads for each model are compared with experimental results. The preparation, processing, and mesh creation times are compared for all models. BEASY results presented a good agreement with the conventional methods.

Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method

Adhesive bonding is nowadays a serious candidate to replace methods such as fastening or riveting, because of attractive mechanical properties. As a result, adhesives are being increasingly used in industries such as the automotive, aerospace and construction. Thus, it is highly important to predict the strength of bonded joints to assess the feasibility of joining during the fabrication process of components (e.g. due to complex geometries) or for repairing purposes. This work studies the tensile behaviour of adhesive joints between aluminium adherends considering different values of adherend thickness (h) and the double-cantilever beam (DCB) test. The experimental work consists of the definition of the tensile fracture toughness (GIC) for the different joint configurations. A conventional fracture characterization method was used, together with a J-integral approach, that take into account the plasticity effects occurring in the adhesive layer. An optical measurement method is used for the evaluation of crack tip opening and adherends rotation at the crack tip during the test, supported by a Matlab® sub-routine for the automated extraction of these quantities. As output of this work, a comparative evaluation between bonded systems with different values of adherend thickness is carried out and complete fracture data is provided in tension for the subsequent strength prediction of joints with identical conditions.

Proposta de melhoria da presença online da marca Cabeça, Aldeia Natal

Relatório de estágio apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

O impacto do branding corporativo na reputação das organizações: o caso Renova

Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

Comportamentos de sexo seguro em individuos infectados por VIH

A investigação científica que se seguiu à descoberta da infecção pelo vírus da imunodeficiência humana (VIH) representou um marco histórico importante, permitindo a instituição de terapêutica e alterando a história natural da infecção, melhorando as expectativas dos indivíduos infectados.Se, por um lado, a terapêutica antirretroviral de alta eficácia (do inglês, Highly Active Antiretroviral Theraphy: HAART), nos países desenvolvidos, teve um enorme impacto na melhoria da qualidade de vida e esperança média de vida dos indivíduos infectados, permitindo-lhes encarar a infecção como uma doença crónica, por outro lado, introduziu-se uma nova dinâmica epidemiológica na transmissão de VIH e um novo desafio para a sua prevenção.Os comportamentos sexuais são o factor-alvo através do qual se pode, de uma forma mais eficaz, prevenir a possibilidade de infectar um qualquer indivíduo na comunidade. Parece, pois, importante haver necessidade de um olhar atento da Saúde Pública sobre a vida sexual dos indivíduos infectados, não só na tentativa de, promover a sua qualidade de vida, como também, de prevenir a disseminação da doença, e, ainda mais importante, prevenir a disseminação do vírus nas suas formas resistentes.O objectivo deste estudo foi analisar a consistência do uso de preservativo/práticas de sexo seguro, em indivíduos infectados por VIH, seguidos em Consulta de Imunodepressão, do Serviço de Doenças Infecciosas, do Hospital de Santa Maria. Pretende-se avaliar, no âmbito da “Educação para a Saúde”, a necessidade de aconselhamento aos indivíduos infectados, relativamente aos seus comportamentos sexuais.Para o efeito, realizou-se um estudo descritivo e transversal. A população envolvida compreendeu todos os indivíduos infectados seguidos na Consulta de Imunodepressão. A amostra foi seleccionada através de aleatorização simples e constituída por 98 elementos. A colheita de dados foi efectuada através do método de entrevista, a qual só teve início após a assinatura do consentimento informado. O estudo decorreu entre 14 de Março e 27 de Junho de 2008.Foram analisados os dados relativamente às variáveis: sócio-demográficas, estado serológico da infecção, história sexual, consumo de substâncias, comportamento sexual e percepção de risco da transmissão da infecção por VIH.Os comportamentos de sexo não seguro foram associados ao número de parceiros sexuais/ano (p=0,007), ter parceiro sexual habitual (p=0,010), ter múltiplos parceiros sexuais ocasionais (p=0,000) e à prática de sexo oral (sexo oral receptivo, p=0,001; sexo oral activo, p=0,006).Os resultados demonstraram a importância da prevenção secundária nos indivíduos infectados por VIH. A necessidade dos centros de atendimento estarem providos de mensagem de prevenção, ensinos e aconselhamento a todas as pessoas infectadas e, também, aos seus parceiros sexuais, aumentando-lhes a qualidade de vida e reduzindo o risco de transmissão da infecção por HIV. ABSTRACT: The scientific research that followed the finding of human immunodeficiency virus (HIV) infection represented an important historical mark, allowing therapeutic institution and changing the natural history of the infection, thus improving the expectations of infected individuals. If by one side the Highly Active Antiretroviral Therapy (HAART) had an enormous impact on the improvement of life quality and life expectancy of the infected individuals on the developed countries, allowing them to face the infection as a chronic disease, on the other side it was introduced a epidemiologic dynamic on the HIV transmission and a new challenge for its prevention. Sexual behaviour is the main factor through which is possible to prevent more efficiently the possibility of infection of a community’s individual. Thus it appears important the need of Public Health to have a careful look into the sexual life of infected individuals, not only to try to promote their life quality but as well to prevent the dissemination of the disease and more importantly prevent the dissemination of the virus in its resistant forms. The objective of this study was to analyse the consistency of the use of condoms/safe sex by individuals infected by HIV that are followed by the Infectious Disease Service of the Santa Maria Hospital through Immune-depression Appointments. The goal was to evaluate the need of advisement to the infected individuals relatively to their sexual behaviours. For that it was done a descriptive and transversal study. The involved population included all infected individuals followed in the Immune-depression Appointments. The sample was selected by simple randomisation and was composed by 98 elements. The data was obtained by interview method, which was initiated after signing the informed consent. The study was took place between 14 March and 27 June 2008. It was analysed the data relative to the variables: socio-demographics, serologic state of the infection, sexual history, substances consumption, sexual behaviour and risk perception on the transmission of HIV infection. The unsafe sexual behaviours were associated to the number of sexual partners/year (p=0,007), having steady partner (p= 0,010), having occasional sexual partners (p=0,000) and oral sex practice (receptive oral sex, p=0,001; active oral sex, p= 0,006).The results demonstrated the importance of the secondary prevention on individuals infected by HIV. It also demonstrated the need of providing the attendance centres with a prevention message, teachings and advises to all infected persons as well as to their sexual partners, increasing their life quality and reducing the transmission risk of HIV infection.

Toroid inductor development for a SIC DC-DC converter up to 150kW, based on finite element method

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Multiobjective optimization for node adaptation in the analysis of composite plates using a meshless collocation method

The bending of simply supported composite plates is analyzed using a direct collocation meshless numerical method. In order to optimize node distribution the Direct MultiSearch (DMS) for multi-objective optimization method is applied. In addition, the method optimizes the shape parameter in radial basis functions. The optimization algorithm was able to find good solutions for a large variety of nodes distribution.

Multiobjective optimization of viscoelastic laminated sandwich structures using the Direct MultiSearch method

A multiobjective approach for optimization of passive damping for vibration reduction in sandwich structures is presented in this paper. Constrained optimization is conducted for maximization of modal loss factors and minimization of weight of sandwich beams and plates with elastic laminated constraining layers and a viscoelastic core, with layer thickness and material and laminate layer ply orientation angles as design variables. The problem is solved using the Direct MultiSearch (DMS) solver for derivative-free multiobjective optimization and solutions are compared with alternative ones obtained using genetic algorithms.

Effect of Adherend Recessing on the Tensile Strength of Single Lap Joints

Bonded joints are gaining importance in many fields of manufacturing owing to a significant number of advantages to the traditional methods. The single lap joint (SLJ) is the most commonly used method. The use of material or geometric changes in SLJ reduces peel and shear peak stresses at the damage initiation sites. In this work, the effect of adherend recessing at the overlap edges on the tensile strength of SLJ, bonded with a brittle adhesive, was experimentally and numerically studied. The recess dimensions (length and depth) were optimized for different values of overlap length (LO), thus allowing the maximization of the joint’s strength by the reduction of peak stresses at the overlap edges. The effect of recessing was also investigated by a finite element (FE) analysis and cohesive zone modelling (CZM), which allowed characterizing the entire fracture process and provided joint strength predictions. For this purpose, a static FE analysis was performed in ABAQUS1 considering geometric nonlinearities. In the end, the experimental and FE results revealed the accuracy of the FE analysis in predicting the strength and also provided some design principles for the strength improvement of SLJ using a relatively simple and straightforward technique.

A governação local no Algarve no contexto de financiamento e responsabilidades

Dissertação de mestrado em Gestão Pública, apresentada à secção autónoma de Ciências Sociais, Jurídicas e Políticas da Universidade de Aveiro,sob orientação da Prof. Doutora Maria Luís Rocha Pinto.

Portuguese strategy for occupational safety and health 2008-2012 for public administration : priorites for action, progress in the implementation of the proposed measures and their impact on occupational safety outcomes

Apresentação realizada no OH&S Forum 2011 - International Forum on Occupational Health and Safety: Policies, profiles and services, na Finlândia de, 20 a 22 Junho de 2011.

Petri net model decomposition - a model based approach supporting distributed execution

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Electrotécnica, Especialidade de Sistemas Digitais, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Local Fractional Variational Iteration Method for Local Fractional Poisson Equations in Two Independent Variables

The local fractional Poisson equations in two independent variables that appear in mathematical physics involving the local fractional derivatives are investigated in this paper. The approximate solutions with the nondifferentiable functions are obtained by using the local fractional variational iteration method.

Parallel GPU architecture for hyperspectral unmixing based on augmented Lagrangian method

Hyperspectral imaging has become one of the main topics in remote sensing applications, which comprise hundreds of spectral bands at different (almost contiguous) wavelength channels over the same area generating large data volumes comprising several GBs per flight. This high spectral resolution can be used for object detection and for discriminate between different objects based on their spectral characteristics. One of the main problems involved in hyperspectral analysis is the presence of mixed pixels, which arise when the spacial resolution of the sensor is not able to separate spectrally distinct materials. Spectral unmixing is one of the most important task for hyperspectral data exploitation. However, the unmixing algorithms can be computationally very expensive, and even high power consuming, which compromises the use in applications under on-board constraints. In recent years, graphics processing units (GPUs) have evolved into highly parallel and programmable systems. Specifically, several hyperspectral imaging algorithms have shown to be able to benefit from this hardware taking advantage of the extremely high floating-point processing performance, compact size, huge memory bandwidth, and relatively low cost of these units, which make them appealing for onboard data processing. In this paper, we propose a parallel implementation of an augmented Lagragian based method for unsupervised hyperspectral linear unmixing on GPUs using CUDA. The method called simplex identification via split augmented Lagrangian (SISAL) aims to identify the endmembers of a scene, i.e., is able to unmix hyperspectral data sets in which the pure pixel assumption is violated. The efficient implementation of SISAL method presented in this work exploits the GPU architecture at low level, using shared memory and coalesced accesses to memory.

Road drivers performance appraisal using a MCDA method: a case study in the road transport company

Performance evaluation increasingly assumes a more important role in any organizational environment. In the transport area, the drivers are the company’s image and for this reason it is important to develop and increase their performance and commitment to the company goals. This evaluation can be used to motivate driver to improve their performance and to discover training needs. This work aims to create a performance appraisal evaluation model of the drivers based on the multi-criteria decision aid methodology. The MMASSI (Multicriteria Methodology to Support Selection of Information Systems) methodology was adapted by using a template supporting the evaluation according to the freight transportation company in study. The evaluation process involved all drivers (collaborators being evaluated), their supervisors and the company management. The final output is a ranking of the drivers, based on their performance, for each one of the scenarios used.