Development of cardiovascular magnetic resonance imaging techniques for improved characterization of atherosclerotic disease

Atherosclerosis is a chronic cardiovascular disease that involves the thicken¬ing of the artery walls as well as the formation of plaques (lesions) causing the narrowing of the lumens, in vessels such as the aorta, the coronary and the carotid arteries. Magnetic resonance imaging (MRI) is a promising modality for the assessment of atherosclerosis, as it is a non-invasive and patient-friendly procedure that does not use ionizing radiation. MRI offers high soft tissue con¬trast already without the need of intravenous contrast media; while modifica¬tion of the MR pulse sequences allows for further adjustment of the contrast for specific diagnostic needs. As such, MRI can create angiographic images of the vessel lumens to assess stenoses at the late stage of the disease, as well as blood flow-suppressed images for the early investigation of the vessel wall and the characterization of the atherosclerotic plaques. However, despite the great technical progress that occurred over the past two decades, MRI is intrinsically a low sensitive technique and some limitations still exist in terms of accuracy and performance. A major challenge for coronary artery imaging is respiratory motion. State- of-the-art diaphragmatic navigators rely on an indirect measure of motion, per¬form a ID correction, and have long and unpredictable scan time. In response, self-navigation (SM) strategies have recently been introduced that offer 100% scan efficiency and increased ease of use. SN detects respiratory motion di¬rectly from the image data obtained at the level of the heart, and retrospectively corrects the same data before final image reconstruction. Thus, SN holds po-tential for multi-dimensional motion compensation. To this regard, this thesis presents novel SN methods that estimate 2D and 3D motion parameters from aliased sub-images that are obtained from the same raw data composing the final image. Combination of all corrected sub-images produces a final image with reduced motion artifacts for the visualization of the coronaries. The first study (section 2.2, 2D Self-Navigation with Compressed Sensing) consists of a method for 2D translational motion compensation. Here, the use of com- pressed sensing (CS) reconstruction is proposed and investigated to support motion detection by reducing aliasing artifacts. In healthy human subjects, CS demonstrated an improvement in motion detection accuracy with simula¬tions on in vivo data, while improved coronary artery visualization was demon¬strated on in vivo free-breathing acquisitions. However, the motion of the heart induced by respiration has been shown to occur in three dimensions and to be more complex than a simple translation. Therefore, the second study (section 2.3,3D Self-Navigation) consists of a method for 3D affine motion correction rather than 2D only. Here, different techniques were adopted to reduce background signal contribution in respiratory motion tracking, as this can be adversely affected by the static tissue that surrounds the heart. The proposed method demonstrated to improve conspicuity and vi¬sualization of coronary arteries in healthy and cardiovascular disease patient cohorts in comparison to a conventional ID SN method. In the third study (section 2.4, 3D Self-Navigation with Compressed Sensing), the same tracking methods were used to obtain sub-images sorted according to the respiratory position. Then, instead of motion correction, a compressed sensing reconstruction was performed on all sorted sub-image data. This process ex¬ploits the consistency of the sorted data to reduce aliasing artifacts such that the sub-image corresponding to the end-expiratory phase can directly be used to visualize the coronaries. In a healthy volunteer cohort, this strategy improved conspicuity and visualization of the coronary arteries when compared to a con¬ventional ID SN method. For the visualization of the vessel wall and atherosclerotic plaques, the state- of-the-art dual inversion recovery (DIR) technique is able to suppress the signal coming from flowing blood and provide positive wall-lumen contrast. How¬ever, optimal contrast may be difficult to obtain and is subject to RR variability. Furthermore, DIR imaging is time-inefficient and multislice acquisitions may lead to prolonged scanning times. In response and as a fourth study of this thesis (chapter 3, Vessel Wall MRI of the Carotid Arteries), a phase-sensitive DIR method has been implemented and tested in the carotid arteries of a healthy volunteer cohort. By exploiting the phase information of images acquired after DIR, the proposed phase-sensitive method enhances wall-lumen contrast while widens the window of opportunity for image acquisition. As a result, a 3-fold increase in volumetric coverage is obtained at no extra cost in scanning time, while image quality is improved. In conclusion, this thesis presented novel methods to address some of the main challenges for MRI of atherosclerosis: the suppression of motion and flow artifacts for improved visualization of vessel lumens, walls and plaques. Such methods showed to significantly improve image quality in human healthy sub¬jects, as well as scan efficiency and ease-of-use of MRI. Extensive validation is now warranted in patient populations to ascertain their diagnostic perfor¬mance. Eventually, these methods may bring the use of atherosclerosis MRI closer to the clinical practice. Résumé L'athérosclérose est une maladie cardiovasculaire chronique qui implique le épaississement de la paroi des artères, ainsi que la formation de plaques (lé¬sions) provoquant le rétrécissement des lumières, dans des vaisseaux tels que l'aorte, les coronaires et les artères carotides. L'imagerie par résonance magné¬tique (IRM) est une modalité prometteuse pour l'évaluation de l'athérosclérose, car il s'agit d'une procédure non-invasive et conviviale pour les patients, qui n'utilise pas des rayonnements ionisants. L'IRM offre un contraste des tissus mous très élevé sans avoir besoin de médias de contraste intraveineux, tan¬dis que la modification des séquences d'impulsions de RM permet en outre le réglage du contraste pour des besoins diagnostiques spécifiques. À ce titre, l'IRM peut créer des images angiographiques des lumières des vaisseaux pour évaluer les sténoses à la fin du stade de la maladie, ainsi que des images avec suppression du flux sanguin pour une première enquête des parois des vais¬seaux et une caractérisation des plaques d'athérosclérose. Cependant, malgré les grands progrès techniques qui ont eu lieu au cours des deux dernières dé¬cennies, l'IRM est une technique peu sensible et certaines limitations existent encore en termes de précision et de performance. Un des principaux défis pour l'imagerie de l'artère coronaire est le mou¬vement respiratoire. Les navigateurs diaphragmatiques de pointe comptent sur une mesure indirecte de mouvement, effectuent une correction 1D, et ont un temps d'acquisition long et imprévisible. En réponse, les stratégies d'auto- navigation (self-navigation: SN) ont été introduites récemment et offrent 100% d'efficacité d'acquisition et une meilleure facilité d'utilisation. Les SN détectent le mouvement respiratoire directement à partir des données brutes de l'image obtenue au niveau du coeur, et rétrospectivement corrigent ces mêmes données avant la reconstruction finale de l'image. Ainsi, les SN détiennent un poten¬tiel pour une compensation multidimensionnelle du mouvement. A cet égard, cette thèse présente de nouvelles méthodes SN qui estiment les paramètres de mouvement 2D et 3D à partir de sous-images qui sont obtenues à partir des mêmes données brutes qui composent l'image finale. La combinaison de toutes les sous-images corrigées produit une image finale pour la visualisation des coronaires ou les artefacts du mouvement sont réduits. La première étude (section 2.2,2D Self-Navigation with Compressed Sensing) traite d'une méthode pour une compensation 2D de mouvement de translation. Ici, on étudie l'utilisation de la reconstruction d'acquisition comprimée (compressed sensing: CS) pour soutenir la détection de mouvement en réduisant les artefacts de sous-échantillonnage. Chez des sujets humains sains, CS a démontré une amélioration de la précision de la détection de mouvement avec des simula¬tions sur des données in vivo, tandis que la visualisation de l'artère coronaire sur des acquisitions de respiration libre in vivo a aussi été améliorée. Pourtant, le mouvement du coeur induite par la respiration se produit en trois dimensions et il est plus complexe qu'un simple déplacement. Par conséquent, la deuxième étude (section 2.3, 3D Self-Navigation) traite d'une méthode de cor¬rection du mouvement 3D plutôt que 2D uniquement. Ici, différentes tech¬niques ont été adoptées pour réduire la contribution du signal du fond dans le suivi de mouvement respiratoire, qui peut être influencé négativement par le tissu statique qui entoure le coeur. La méthode proposée a démontré une amélioration, par rapport à la procédure classique SN de correction 1D, de la visualisation des artères coronaires dans le groupe de sujets sains et des pa¬tients avec maladies cardio-vasculaires. Dans la troisième étude (section 2.4,3D Self-Navigation with Compressed Sensing), les mêmes méthodes de suivi ont été utilisées pour obtenir des sous-images triées selon la position respiratoire. Au lieu de la correction du mouvement, une reconstruction de CS a été réalisée sur toutes les sous-images triées. Cette procédure exploite la cohérence des données pour réduire les artefacts de sous- échantillonnage de telle sorte que la sous-image correspondant à la phase de fin d'expiration peut directement être utilisée pour visualiser les coronaires. Dans un échantillon de volontaires en bonne santé, cette stratégie a amélioré la netteté et la visualisation des artères coronaires par rapport à une méthode classique SN ID. Pour la visualisation des parois des vaisseaux et de plaques d'athérosclérose, la technique de pointe avec double récupération d'inversion (DIR) est capa¬ble de supprimer le signal provenant du sang et de fournir un contraste posi¬tif entre la paroi et la lumière. Pourtant, il est difficile d'obtenir un contraste optimal car cela est soumis à la variabilité du rythme cardiaque. Par ailleurs, l'imagerie DIR est inefficace du point de vue du temps et les acquisitions "mul- tislice" peuvent conduire à des temps de scan prolongés. En réponse à ce prob¬lème et comme quatrième étude de cette thèse (chapitre 3, Vessel Wall MRI of the Carotid Arteries), une méthode de DIR phase-sensitive a été implémenté et testé

HETEROTIC GROUP FORMATION IN PSIDIUM GUAJAVA L. BY ARTIFICIAL NEURAL NETWORK AND DISCRIMINANT ANALYSIS

ABSTRACT The present study aimed at evaluating the heterotic group formation in guava based on quantitative descriptors and using artificial neural network (ANN). For such, we evaluated eight quantitative descriptors. Large genetic variability was found for the eight quantitative traits in the 138 genotypes of guava. The artificial neural network technique determined that the optimal number of groups was three. The grouping consistency was determined by linear discriminant analysis, which obtained classification percentage of the groups, with a value of 86 %. It was concluded that the artificial neural network method is effective to detect genetic divergence and heterotic group formation.

Localisation of B2C Marketing Communications on the Internet. Case: New Product Launch

Tavoitteena on tutkia kuluttajille suunnatun markkinointiviestinnän lokalisointia Internetissä uuden tuotteen lanseerauksen yhteydessä. Vaikka Internet on globaali media, sen haasteena on tarjota paikallisesti kuluttajille merkityksellistä sisältöä, sekä ylläpitää yhtenäistä brandia. Tutkimus on toteutettu deskriptiivisenä tapaustutkimuksena globaalissa tietoliikenneyrityksessä, ja se perustuu haastatteluihin sekä valmiiseen aineistoon. Lyhentyneet kulutuselektroniikan elinkaaret, nopeat tuotelanseeraukset, kasvava yhteistyö ulkopuolisten kumppanien kanssa sekä markkinointiviestinnän integraation tarve aiheuttavat ajoitusongelmia lokalisointiin. Yhtenäinen web infrastruktuuri, työkalut ja globaalit prosessit mahdollistavat kustannustehokkaan lokalisoinnin business-tilanteen muuttuessa ja kultturieroista johtuen. Tässä tutkimuksessa on selvitetty neljän tekijän (ympäristö, tuote, kuluttaja, organisaatiostrategia) vaikutusta lokalisointiin. Jotta maiden parhaita menettelytapoja voidaan hyödyntää nykyistä paremmin ja välttää kultturierojen sivuuttaminen, tarvitaan sekä ’virallista’ että vapaamuotoista seurantaa. Globaalin Internet-sivuston ja lukuisten kansallisten sivustojen ylläpitäminen vaatii Internet-sivustojen fokuksen tarkkaa noudattamista, globaalia segmentointia, ja sen mukaista sisällön tarjontaa kuluttajille.

Elaboración de un sistema de categorías para el análisis sociométrico: su aplicación en aulas multiculturales

That contribution shows a categorisation system in order to analyse the psicosocial setup of people inside a group. It implies a kind of information analysis more qualitative and dinamic than the traditional and well known sociometric indexes. The categories present not only the quantity of recieved choices, rejections and perceptions, but the quality of established relations. Studied the intern consistency by different analistds, the elaborated categorical system can by applied to the study of sociometric tests to the primary students in multicultural classroom, in order to study the level and nature of integration among different ethnic minorities. A least, that contribution ofers the outcomes from the analysis of the integration of a simple of 95 students (girls and boys) from several ethnic minorities and describes their limits and conclusions.

Diffusion of Administrative Innovation: TQM Implementation and Effectiveness in a Global

The main objective of this dissertation is to create new knowledge on an administrative innovation, its adoption, diffusion and finally its effectiveness. In this dissertation the administrative innovation is approached through a widely utilized management philosophy, namely the total quality management (TQM) strategy. TQM operationalizes a self-assessment procedure, which is based on continual improvement principles and measuring the improvements. This dissertation also captures the theme of change management as it analyzes the adoption and diffusion of the administrative innovation. It identifies innovation characteristics as well as organisational and individual factors explaining the adoption and implementation. As a special feature, this study also explores the effectiveness of the innovation based on objective data. For studying the administrative innovation (TQM model), a multinational Case Company provides a versatile ground for a deep, longitudinal analysis. The Case Company started the adoption systematically in the mid 1980s in some of its units. As part of their strategic planning today, the procedure is in use throughout the entire global company. The empirical story begins from the innovation adoption decision that was made in the Case Company over 22 years ago. In order to be able to capture the right atmosphere and backgrounds leading to the adoption decision, key informants from that time were interviewed, since the main target was to clarify the dynamics of how an administrative innovation develops. In addition, archival material was collected and studied, available memos and data relating to the innovation, innovation adoption and later to the implementation contained altogether 20500 pages of documents. A survey was furthermore conducted at the end of 2006 focusing on questions related to the innovation, organization and leadership characteristics and the response rate totalled up to 54%. For measuring the effectiveness of the innovation implementation, the needed longitudinal objective performance data was collected. This data included the profit unit level experience of TQM, the development of the self assessment scores per profit unit and performance data per profit unit measured with profitability, productivity and customer satisfaction. The data covered the years 1995-2006. As a result, the prerequisites for the successful adoption of an administrative innovation were defined, such as the top management involvement, support of the change agents and effective tools for implementation and measurement. The factors with the greatest effect on the depth of the implementation were the timing of the adoption and formalization. The results also indicated that the TQM model does have an effect on the company performance measured with profitability, productivity and customer satisfaction. Consequently this thesis contributes to the present literature (i) by taking into its scope an administrative innovation and focusing on the whole innovation implementation process, from the adoption, through diffusion until its consequences, (ii) because the studied factors with an effect on the innovation adoption and diffusion are multifaceted and grouped into individual, organizational and environmental factors, and a strong emphasis is put on the role of the individual change agents and (iii) by measuring the depth and consistency of the administrative innovation. This deep analysis was possible due to the availability of longitudinal data with triangulation possibilities.

Towards high-quality simultaneous EEG-fMRI at 7T: Detection and reduction of EEG artifacts due to head motion.

The enhanced functional sensitivity offered by ultra-high field imaging may significantly benefit simultaneous EEG-fMRI studies, but the concurrent increases in artifact contamination can strongly compromise EEG data quality. In the present study, we focus on EEG artifacts created by head motion in the static B0 field. A novel approach for motion artifact detection is proposed, based on a simple modification of a commercial EEG cap, in which four electrodes are non-permanently adapted to record only magnetic induction effects. Simultaneous EEG-fMRI data were acquired with this setup, at 7T, from healthy volunteers undergoing a reversing-checkerboard visual stimulation paradigm. Data analysis assisted by the motion sensors revealed that, after gradient artifact correction, EEG signal variance was largely dominated by pulse artifacts (81-93%), but contributions from spontaneous motion (4-13%) were still comparable to or even larger than those of actual neuronal activity (3-9%). Multiple approaches were tested to determine the most effective procedure for denoising EEG data incorporating motion sensor information. Optimal results were obtained by applying an initial pulse artifact correction step (AAS-based), followed by motion artifact correction (based on the motion sensors) and ICA denoising. On average, motion artifact correction (after AAS) yielded a 61% reduction in signal power and a 62% increase in VEP trial-by-trial consistency. Combined with ICA, these improvements rose to a 74% power reduction and an 86% increase in trial consistency. Overall, the improvements achieved were well appreciable at single-subject and single-trial levels, and set an encouraging quality mark for simultaneous EEG-fMRI at ultra-high field.

The Besançon Galaxy Model renewed. I. Constraints on the Galactic thin disc evolution from Tycho data

Context. The understanding of Galaxy evolution can be facilitated by the use of population synthesis models, which allow to test hypotheses on the star formation history, star evolution, as well as chemical and dynamical evolution of the Galaxy. Aims. The new version of the Besanc¸on Galaxy Model (hereafter BGM) aims to provide a more flexible and powerful tool to investigate the Initial Mass Function (IMF) and Star Formation Rate (SFR) of the Galactic disc. Methods. We present a new strategy for the generation of thin disc stars which assumes the IMF, SFR and evolutionary tracks as free parameters. We have updated most of the ingredients for the star count production and, for the first time, binary stars are generated in a consistent way. We keep in this new scheme the local dynamical self-consistency as in Bienayme et al (1987). We then compare simulations from the new model with Tycho-2 data and the local luminosity function, as a first test to verify and constrain the new ingredients. The effects of changing thirteen different ingredients of the model are systematically studied. Results. For the first time, a full sky comparison is performed between BGM and data. This strategy allows to constrain the IMF slope at high masses which is found to be close to 3.0, excluding a shallower slope such as Salpeter"s one. The SFR is found decreasing whatever IMF is assumed. The model is compatible with a local dark matter density of 0.011 M pc−3 implying that there is no compelling evidence for significant amount of dark matter in the disc. While the model is fitted to Tycho2 data, a magnitude limited sample with V<11, we check that it is still consistent with fainter stars. Conclusions. The new model constitutes a new basis for further comparisons with large scale surveys and is being prepared to become a powerful tool for the analysis of the Gaia mission data.

CNDOL: A fast and reliable method for the calculation of electronic properties of very large systems. Applications to retinal binding pocket in rhodopsin and gas phase porphine.

Very large molecular systems can be calculated with the so called CNDOL approximate Hamiltonians that have been developed by avoiding oversimplifications and only using a priori parameters and formulas from the simpler NDO methods. A new diagonal monoelectronic term named CNDOL/21 shows great consistency and easier SCF convergence when used together with an appropriate function for charge repulsion energies that is derived from traditional formulas. It is possible to obtain a priori molecular orbitals and electron excitation properties after the configuration interaction of single excited determinants with reliability, maintaining interpretative possibilities even being a simplified Hamiltonian. Tests with some unequivocal gas phase maxima of simple molecules (benzene, furfural, acetaldehyde, hexyl alcohol, methyl amine, 2,5 dimethyl 2,4 hexadiene, and ethyl sulfide) ratify the general quality of this approach in comparison with other methods. The calculation of large systems as porphine in gas phase and a model of the complete retinal binding pocket in rhodopsin with 622 basis functions on 280 atoms at the quantum mechanical level show reliability leading to a resulting first allowed transition in 483 nm, very similar to the known experimental value of 500 nm of "dark state." In this very important case, our model gives a central role in this excitation to a charge transfer from the neighboring Glu(-) counterion to the retinaldehyde polyene chain. Tests with gas phase maxima of some important molecules corroborate the reliability of CNDOL/2 Hamiltonians.

Translation and psychometric evaluation of a French version of the Readiness for Hospital Discharge Scale.

AIMS AND OBJECTIVES: To evaluate the reliability and the factor structure of the Readiness for Hospital Discharge Scale - French version. BACKGROUND: The patient's perspective is essential when assessing risk for adverse events at hospital discharge. Developed in the USA, the Readiness for Hospital Discharge Scale is the only instrument that measures an individual's self-perception of readiness before leaving the hospital. A French version of the Readiness for Hospital Discharge Scale was developed and validated. DESIGN: Cross-sectional study. METHODS: A convenience sample of 265 older inpatients from four medical units was selected. The translation and cultural adaptation of the scale involved experts in gerontology and the French language and included back translation. The items were semantically evaluated and pretested in 10 older inpatients. The scale's psychometric properties were internally validated by using confirmatory and exploratory factor analyses. Reliability was assessed by examining the internal consistency of its items. RESULTS: Goodness-of-fit indices of the confirmatory factor analyses were not adequate, but reliability was acceptable (Cronbach's α = 0·80). Exploratory factor analysis of the French version provided results close to those described for the English version, with three similar subscales (physical and emotional readiness, coping with medical treatment and personal care), whereas the initially described Expected Support subscale was not identified in the French version. CONCLUSION: The Readiness for Hospital Discharge Scale - French version appears to be partially consistent with its original English version, but requires additional adaptation to fully take into account the Swiss context and culture to achieve its original aim. RELEVANCE TO CLINICAL PRACTICE: Assessing patient readiness for hospital discharge before leaving hospital could help nurses to improve the discharge planning process and achieve better patient preparedness and care coordination.

Lajittumisen dynamiikka epäpuhtauksien ja kuitujen painelajittelussa

Viimevuosina kuvantamistekniikat ovat kehittyneet huomattavasti. Näiden uusien tekniikoiden avulla voidaan tarkastella erilaisia prosesseja aiempaa tarkemmin. Painelajittelun teoriat perustuvat pääasiassa makrotason mittauksien pohjalta tehtyihin matemaattisiin malleihin, ja itse lajittumistapahtumaa ei ole aiemmin päästy kovinkaan tarkasti havainnoimaan. Tämän työn tavoitteena olikin selvittää lajittumistapahtumaa uuden kuvantamistekniikan avulla. Työn kirjallisuusosassa esiteltiin lyhyesti painelajitin ja sen toiminta. Myös painelajittelun perusteoriat käytiin lyhyesti läpi. Teoriaosan pääpaino oli lajittumistapahtumassa ja siihen vaikuttavissa tekijöissä. Lisäksi teoriaosassa esiteltiin teollisen painelajittelun nykytilannetta, työtä varten tehdyn esiselvityksen pohjalta. Lajitinsimulaattorikoeajoissa selvitettiin kuitujen ja roskapartikkelien käyttäyty-mistä painelajittimessa kuvantamisen avulla. Kuvauksissa keskityttiin rakosihdin raon tapahtumiin, sekä sihtipinnan tapahtumiin. Kuvamateriaalista laskettiin kuitujen ja roskien liikenopeuksia lankasihtiprofiilin raossa, sekä sihdin pinnalla. Lisäksi tutkittiin kehänopeuden, tuotannon ja sakeuden vaikutusta liike-nopeuksiin. Kuvamateriaalista pyrittiin myös havainnoimaan mahdollista kuitujen takaisinvirtausta. Kuvantamisella saatiin uutta tietoa kuitujen ja roskapartikkelien liikkeestä painelajittimessa. Tuloksista kävi muun muassa ilmi, että roottorin elementin pienimmän välyksen kohdalla akseptoituu huomattava määrä massaa. Tämä selittyy sillä, että pienimmän välyksen kohta tuottaa huomattavan positiivisen painepulssin. Kuitujen ja roskapartikkelien nopeudet raossa noudattelivat muutenkin hyvin selkeästi elementin tuottamaa painepulssia. Lisäksi kuvamateriaalista havaittiin, että sihdin raon suulle kertyy profiilin korkuinen kuituflokki. Koko sihdin peittävää kuitumattoa ei havaittu.

Jauhinterien valmistuksen kehittäminen

Diplomityö käsittelee eräälle paperiteollisuuden komponentteja valmistavalle yritykselle tehtyä tutkimusta, jossa tutkittiin erilaisia valmistusmenetelmiä, joilla voidaan valmistaa uudenlaisia jauhinteriä. Diplomityössä ideoitiin erilaisia jauhinteränkonstruktiovaihtoehtoja. Vaihtoehtoja havainnollistamaan piirrettiin jokaisesta ratkaisusta 3D- mallit. Vaihtoehtojen pohjalta päätettiin suoritettavat valmistustestaukset. Työssä suoritettiin valmistustestejä kuitulaserilla, hiilidioksidilaserilla sekä hienosädeplasmalla. Näiden testien perusteella saatiin näkemys siitä, mikä konstruktiovaihto on valmistusteknisesti paras, täyttäen samalla jauhinterälle asetetut vaatimukset. Diplomityön tuloksena syntyi toimiva ja kustannustehokas ratkaisu jauhinterien valmistamiseksi.

Mittausjärjestelmän kehittäminen massansyöttöön

Tämän diplomityön tavoitteena on kehittää menetelmä mitata keskisakeuksisen sellumassan virtausta; suuntaa ja suuruutta, vapaassa tilassa ja kehittää koelaite, jolla sellupesurin massansyöttötapahtumaa voidaan tutkia sekä rakenteellisesta että prosessinäkökulmasta. Virtausmittausmenetelmän kehityksessä arvioitiin ensin erilaisten perusmittausmenetelmien soveltuvuutta keskisakeuksisen sellumassan virtausmittaukseen. Valitun menetelmän, vastusvenymäliuskamittauksen, kehityksessä ideoitiin sekä anturin mittoja ja geometriaa että virtauskappaleiden geometriaa. Lopullisella anturikonstruktiolla suoritettiin virtausmittauskokeita erilaisilla virtauskappaleilla putkivirtauksessa. Virtausaineena oli vesi sekä sellumassa eri sakeuksissa. Tulosten analysoinnin perusteella suoritettiin valitulla virtauskappaleella alustava koeajo prosessilaitteessa. Koelaitteen kehityksessä määritettiin ensin laitteelle tutkimukselliset tavoitteet. Erilaisia tutkimusmenetelmien arvioinnin perustella valittiin koelaitteeseen sopivat menetelmät. Tutkimuksellisten tavoitteiden ja sovellettavien menetelmien perusteella mitoitettiin ja suunniteltiin koelaite.

Quality of life after pulmonary embolism, validation of the French version of the PEmb-QoL questionnaire

Background: The PEmb-QoL is a validated 40-item questionnaire to quantify health-related quality of life in patients having experienced pulmonary embolism (PE). It covers six health dimensions: frequency of complaints, activities of daily living limitations, work-related problems, social limitations, intensity of complaints, and emotional complaints. Originally developed in Dutch and English, we sought to prospectively validate the psychometric properties of a French version of the PEmb-QoL. Methods: We performed a forward and backward translation of the English version of the PEmb-QoL into French. French-speaking consecutive adult patients with an acute, objectively confirmed PE admitted to the emergency department of a Swiss university hospital between 08/2009 and 09/2011 were recruited telephonically. We used standard psychometric tests and criteria to evaluate the acceptability, reliability, and validity of the French version of the PEmb-QoL. We also performed an exploratory factor analysis. Results: Overall, 102 patients were enrolled in the study. The French version of the PEmb-QoL showed good reliability (internal consistency, item-total and inter-item correlations), reproducibility (test-retest reliability), and validity (convergent, discriminant) in French-speaking patients with PE. The exploratory factor analysis suggested three underlying dimensions: limitations in daily activity (items 4b-m, 5a-d), symptoms (items 1a-h and 7), and emotional complaints (items 9a-f and j). Conclusion: We successfully validated the French version of the PEmb-QoL questionnaire in patients with PE. Our results show that the PEmb-QoL is a valuable tool for assessing health-related quality of life after PE in French-speaking patients.

Microquasar models for 3EG J1828+0142 and 3EG J1735-1500

Microquasars are promising candidates to emit high-energy gamma-rays. Moreover, statistical studies show that variable EGRET sources at low galactic latitudes could be associated with the inner spiral arms. The variable nature and the location in the Galaxy of the high-mass microquasars, concentrated in the galactic plane and within 55 degrees from the galactic center, give to these objects the status of likely counterparts of the variable low-latitude EGRET sources. We consider in this work the two most variable EGRET sources at low-latitudes: 3EG J1828+0142 and 3EG J1735-1500, proposing a microquasar model to explain the EGRET data in consistency with the observations at lower energies (from radio frequencies to soft gamma-rays) within the EGRET error box.

Factors affecting hospital admission and recovery stay duration of in-patient motor victims in Spain

Hospital expenses are a major cost driver of healthcare systems in Europe, with motor injuries being the leading mechanism of hospitalizations. This paper investigates the injury characteristics which explain the hospitalization of victims of traffic accidents that took place in Spain. Using a motor insurance database with 16.081 observations a generalized Tobit regression model is applied to analyse the factors that influence both the likelihood of being admitted to hospital after a motor collision and the length of hospital stay in the event of admission. The consistency of Tobit estimates relies on the normality of perturbation terms. Here a semi-parametric regression model was fitted to test the consistency of estimates, concluding that a normal distribution of errors cannot be rejected. Among other results, it was found that older men with fractures and injuries located in the head and lower torso are more likely to be hospitalized after the collision, and that they also have a longer expected length of hospital recovery stay.