Appendix A: LA-ICP-MS results (Laser-ablation inductively coupled plasma mass spectrometer) from monazite Moacir standard

Three samples of garnet-kyanite paragneiss from the Variscan Ulten Zone (Northern Italy) were studied in detail for U-Th-Pb monazite dating. Monazite in these gneisses is abundant, shows highly variable grain size and occupies different textural positions: within the matrix, as inclusion in garnet and kyanite, within apatite aggregates. Monazite shows different deformation features as a function of the textural position: enclosed (shielded) monazite is generally more fractured than matrix (unshielded) monazite. The integration of textural information with deformation features and in situ U-Th-Pb analyses by LA-ICP-MS indicates that there is no direct correlation between textural site and monazite ages. Old ages of 351-343 Ma, determined on portions of large matrix (unshielded) monazite and on rare domains of monazite shielded by garnet, have been related to a prograde stage of the Variscan metamorphic evolution of the Ulten Zone. Ages of 330-326 Ma, which are related to the thermal peak, are recorded by small matrix monazite, external domains of large matrix monazite, and by (domains of) fractured monazite enclosed in garnet and kyanite. Large, old unshielded grains formed as blasts during the prograde metamorphic history and survived the peak metamorphism during which crystallisation/re-crystallisation partially occurred.

Grain size and heavy mineral analysis of Sander in Schleswig-Holstein, Germany

Die Sandergebiete sind von 5 Zentren her geschüttet, den Gletschertoren bei Flensburg, Frörup/Översee, Idstedt/Lürschau, Schleswig, Owschlag. Die Körnung der Schmelzwassersande nimmt mit zunehmender Entfernung von den Gletschertoren zunächst schnell, von Medianwerten über 1 mm auf Medianwerte um 0,4 mm in 10 km, dann langsam bis auf Medianwerte unter 0,2 mm in 30 km Entfernung ab. Sortierung und Symmetrie der Sande steigen entsprechend. Aus den Kornverteilungen lassen sich die Fließgeschwindigkeiten bei der Ablagerung ablesen. Sie sind geringer gewesen, als es die mächtigen und verbreiteten Akkumulationen erscheinen lassen. Bereits in 6 km Entfernung vom Eisrand flossen die Schmelzwässer als träge Bäche (0,3 m/sec) ab. In den Gletschertoren traten stoßweise extreme Fließgeschwindigkeiten auf, waren aber nur in geringem Maße am Gesamtaufbau der Sander beteiligt. Die Verbreitung der Würmsande paßt sich den Formen einer älteren Landschaft an. Sie läßt sich im behandelten Gebiet mit Hilfe der Schwermineralanalyse deutlich gegenüber den rißzeitlichen Ablagerungen abgrenzen, da die Verteilungen in den verschiedenaltrigen Sedimenten unterschiedlich sind. Vor Allem das Hornblende/Epidotverhältnis (Hornblendezahl nach STEINERT) ist ein gutes Kriterium. Da rißzeitliche Ablagerungen von den Schmelzwässern aufgearbeitet wurden, und zudem die Hornblenden im Laufe des Transportes stark abrollen, verwischen sich die Unterschiede in weiter Entfernung vom Eisrand. Schmelzwassersande der Würmvereisung sind vor Allem im Norden des Arbeitsgebietes weit nach Westen, bis an die nordfriesischen Inseln, geschüttet worden. Die Schmelzwässer benutzten als Durchlässe zu den Senken des Eemmeeres an der Westküste Täler in rißzeitlichen Hochgebieten. Die Wassermengen wurden hier gebündelt, sodaß sich auf den Eemablagerungen im Anschluß an die Durchlässe "Sekundärsander" ausbreiteten. Die Mächtigkeit der anstehenden Würm-Sandergebiete beträgt bis zu 20 m, meistens zwischen 10 und 15 m. An der Westküste sind die Schmelzwasserablagerungen von marinem Alluvium überdeckt. Teile der morphographisch als junge Sanderebenen erscheinenden Gebiete bestehen in Wirklichkeit aus rißzeitlichen, von jungen Schmelzwässern allenfalls oberflächlich umgearbeiteten Ablagerungen der älteren Vereisung. So ist der westliche und südwestliche Teil des Schleisanders schon während der Rißvereisung aufgeschüttet.

Mineralogy of sediments at DSDP Leg 67 Hole

Seven sites were drilled during Leg 67 along a transect across the Middle America Trench off Guatemala: four (Sites 494, 496, 497, and 498) on continental slope, two (Sites 499 and 500) on Trench floor, and one (Site 495) on the Cocos Plate. We studied the mineralogy of sediments from Sites 494, 495, 496, 499, and 500. Our objective was to investigate the origin and source of separate minerals and mineral assemblages, giving special attention to the influence of the alteration of basalts on the sediment mineralogy, which we expected to be particularly important in layers just above oceanic basement.

Investigation of the Nucleation and Growth of Colloidal Indium Phosphide: from Molecular Precursors to Semiconductor Nanocrystals through In37P20(O2CR)51 as a Magic-Size Intermediate

Thesis (Ph.D.)--University of Washington, 2016-06

Der Schwermineral-Gehalt von Saale-zeitlichen Moränen- und Schmelzwasser-Ablagerungen des Münsterlandes

This article is a first summary of the heavy-mineral content of moraine and meltwater deposits of the Saalian glaciation in the Münsterland and its northeastern extension (NW Germany). In the beginning the appearance and distribution of both types of sediments are described (E. Speetzen), then the heavy mineral composition of selected outcrops is reported and the results are compared (D. Henningsen). Generally the predominant heavy minerals are garnet, minerals of the epidote group, zircon, and ordinary hornblende. The heavy mineral contents of moraine sediments sometimes are similar to that of meltwater deposits, in other cases they are different. Obviously there exists no relation between the heavy mineral composition and various advances of the Scandinavian ice sheet and their sediments, the content of heavy minerals rather depends on local influences.

Schwermineral-Untersuchungen in quartär-zeitlichen Sanden nordwestlich von Hannover

A total of 117 samples of quarternary sediments, mostly sands, from a region NW of Hannover (Lower Saxony) has been investigated with regard to their content of heavy minerals. The absolute percentage of transparent heavy minerals approximates 0.2 Vol.%. If several samples of glaciofluvial sands (Drenthe-stage) or dune sands (Late Weichsel-stage to Holocene) are taken from one outcrop they show great similarities in their heavy minerals contents. Glaciofluvial sands of the Elster-stage evidently have less Garnet, Hornblende and minerals of volcanic origin (Augite, partly also Orthopyroxenes, Oxyhornblende and Olivine) than those of the Drenthe-stage, Weichsel-stage, and the Holocene. All these groups hold nearly the same average assemblages of heavy mineral, thus indicating that within the Drenthe-stage or later material from north and from south has been mixed and/or reworked. In the area investigated the proportions of heavy minerals do not help to identify either the stratigraphic position or the way of deposition of different sandy sediments younger than the Elster-stage. The distributional pattern of several heavy minerals point out that Kyanite, Hornblende and Epidote have been transported predominantly from the north, whereas Garnet and Staurolite have sources both in the north and the south. Tourmaline, Apatite and the minerals of volcanic origin mainly must be derived from the south. All results obtained in the region examined should not be transferred to other zones of the lowlands of Northern Germany automatically.

Mossbauer scattering studies with the isotopes Os186, Os188, Eu153 and Pr1410

U of I Only

Geologia, petrologia, geocronologia e mineralizações sulfetadas do complexo ézio, província mineral de carajás, Brasil

Dissertação (mestrado)—Universidade de Brasília, Instituto de Geociências, Pós-Graduação em Geologia, 2015.

DEVELOPMENT OF LI+ AND NA+ CONDUCTING CERAMICS AND CERAMIC STRUCTURES FOR USE IN SOLID STATE BATTERIES

A solid state lithium metal battery based on a lithium garnet material was developed, constructed and tested. Specifically, a porous-dense-porous trilayer structure was fabricated by tape casting, a roll-to-roll technique conducive to high volume manufacturing. The high density and thin center layer (< 20 μm) effectively blocks dendrites even over hundreds of cycles. The microstructured porous layers, serving as electrode supports, are demonstrated to increase the interfacial surface area available to the electrodes and increase cathode loading. Reproducibility of flat, well sintered ceramics was achieved with consistent powderbed lattice parameter and ball milling of powderbed. Together, the resistance of the LLCZN trilayer was measured at an average of 7.6 ohm-cm2 in a symmetric lithium cell, significantly lower than any other reported literature results. Building on these results, a full cell with a lithium metal anode, LLCZN trilayer electrolyte, and LiCoO2 cathode was cycled 100 cycles without decay and an average ASR of 117 ohm-cm2. After cycling, the cell was held at open circuit for 24 hours without any voltage fade, demonstrating the absence of a dendrite or short-circuit of any type. Cost calculations guided the optimization of a trilayer structure predicted that resulting cells will be highly competitive in the marketplace as intrinsically safe lithium batteries with energy densities greater than 300 Wh/kg and 1000 Wh/L for under $100/kWh. Also in the pursuit of solid state batteries, an improved Na+ superionic conductor (NASICON) composition, Na3Zr2Si2PO12, was developed with a conductivity of 1.9x10-3 S/cm. New super-lithiated lithium garnet compositions, Li7.06La3Zr1.94Y0.06O12 and Li7.16La3Zr1.84Y0.16O12, were developed and studied revealing insights about the mechanisms of conductivity in lithium garnets.

Electron microprobe investigations of metamorphic reactions and mineral growth histories, Kwoiek area, British Columbia

The Kwoiek Area of British Columbia contains a pendant or screen of metamorphosed sedimentary and volcanic rocks almost entirely surrounded by a portion of the Coast Range Batholith, and intruded by several dozen stocks. The major metamorphic effects were produced by the quartz diorite batholithic rocks, with minor and later effects by the quartz diorite stocks. The sequence of important metamorphic reactions in the metasedimentary and metavolcanic rocks, ranging in grade from chlorite to sillimanite, is:

1. chlorite + carbonate + muscovite → epidote + biotite

2. chlorite + carbonate → actinolite + epidote

3. chlorite + muscovite → garnet + biotite

4. chlorite + epidote → garnet + hornblende

5. chlorite + muscovite → garnet + staurolite + biotite

6. chlorite + muscovite → aluminum silicate + biotite

7. muscovite + staurolite → garnet + aluminum silicate + biotite

8. staurolite → garnet + aluminum silicate

Continuous reactions, occurring between reactions 5 and 7, are:

A. chlorite + (high Ti) biotite + Al₂O₃ (from plagioclase?)→ garnet + staurolite + (low Ti) biotite + O₂

B. muscovite (phengitic) → garnet + staurolite +muscovite (less phengitic) + O₂ (?)

Detailed electron microprobe work on garnet, staurolite, biotite, and chlorite shows that:

(1) The garnet porphyroblasts are zoned according to a depletion model, called the Rayleigh depletion model, which assumes equilibrium between the edge of a growing garnet and the minerals which are unzoned, notably biotite, chlorite, and muscovite, but which assumes disequilibrium within the garnet.

(2) The staurolite porphyroblasts are also zoned, and from their zoning patterns reactions A, B, and 5 are documented. Progressive reduction of iron with increasing grade of metamorphism is also inferred from the staurolite zoning patterns.

(3) During a late period of falling temperature garnet continued to grow and the biotite and chlorite reequilibrated. The biotite, chlorite, and garnet edge compositions can vary from point to point in a given thin section, indicating that the volume of equilibrium at the final stage of metamorphism was only a few cubic microns.

(4) The horizon within the garnet that grew at maximum temperature can be identified. The Mg/Fe ratio of this horizon, if the garnet composition is a limiting composition in the Al₂O₃ - K₂O - FeO - MgO tetrahedron, increases systematically with increasing metamorphic grade. Biotite and chlorite compositions also show a general increase in Mg/Fe ratio with increasing metamorphic grade, but staurolite appears to show the reverse effect.

(5) The Mg/Fe ratio at the maximum temperature horizon of the garnet porphyroblasts is a function of its Mn content as evidenced from the study of five garnet-bearing rocks, collected from one outcrop area, with the same assemblage but with differing proportions of minerals.

An important implication of zoned minerals is that the effective composition of a system in a phase lies on the join between the homogeneous minerals (if there are two) and not within three-or- four-phase fields when a zoned mineral, such as garnet or staurolite, is present in the assemblage.

Study of the three aluminum silicates found in the Kwoiek Area showed that a constant pressure change in polymorphs from andalusite to kyanite to sillimanite took place with increasing temperature. This transition series is best explained by the metastable formation of andalusite.

Photographic materials on pages 15, 121, 160, 162, and 164 are essential and will not reproduce clearly on Xerox copies. Photographic copies should be ordered.

Láser Q-Switched en el manejo de ocronosis exógena: revisión sistemática de la literatura

Antecedentes: La ocronosis Exógena (OE) es una enfermedad subdiagnosticada y de difícil manejo (1). El láser Q-Switched (QS) surge como una alternativa para el tratamiento de esta (2). Objetivo: Describir las características de los pacientes, del láser QS y los desenlaces en el tratamiento de OE. Métodos: Se realizó una búsqueda de la literatura en las bases PubMed, Embase, PMC, Scielo, Elselvier, BMJ Case Reports, Journal of Medical Case Reports, Cases Journal e International Medical Case Reports Journal, desde enero del 2000 a marzo del 2016, pacientes con ocronosis exógena, 18 a 70 años, tratados con láser QS. Los artículos fueron evaluados mediante la herramienta de evaluación de validez y valor educativo de reportes de caso descrito por Pierson (3). Resultados: Se encontraron 256 artículos, 63 fueron seleccionados: 28 repetidos y 31 no cumplieron criterios de inclusión. Se escogieron 4 artículos que reportan 12 casos de pacientes con ocronosis exógena diagnosticada mediante estudio histopatológico y tratada con láser QS. Discusión: Hay poca experiencia con el láser QS en OE. En la práctica clínica se usa para tatuajes y patologías pigmentarias dérmicas con resultados satisfactorios. El pigmento dérmico en OE y la corta duración de pulso de láser QS, podrían ser el pilar de tratamiento para OE. Conclusión: El láser QS puede ser útil para el tratamiento en OE, con nivel de evidencia 3 y grado de recomendación D. Se sugiere realizar estudios clínicos con mayor grado de evidencia.

Cistolitotomía percutánea en paciente con derivación urinaria compleja tipo mitrofanoff

Los cálculos vesicales son los más frecuentes del tracto urinario bajo (1). El factor predisponente más frecuente para la formación de cálculos vesicales es la obstrucción del tracto de salida. Presentaremos el caso de una paciente con antecedente de trauma uretral por fractura de pelvis; derivada con un Mitrofanoff; con diagnostico de cistolitiasis múltiple con cálculos de hasta 1 cm. El objetivo es mostrar la posibilidad de manejo de la cistolitiasis vía percutánea en una paciente con una derivación urinaria compleja funcionante, procedimiento menos mórbido, con menor tiempo de recuperación y con resultados comparables a otras técnicas. Inicia el procedimiento previa cateterización del Mitrofanoff con sonda Foley 12Fr, realizando punción suprapúbica para mediana izquierda a 2 cm de la rama púbica con aguja Chiba, posteriormente se avanzó guía hidrofílica seguida de varilla y dilatadores secuenciales de Alken 9Fr-27Fr y colocación de camisa Amplatz 28 Fr. Se retiraron dilatadores conservando guía de seguridad, se extrajeron la totalidad de los cálculos. Se ocluyó herida y se dejó sonda Foley conectada a Cystoflo. Egreso al día 1 post operatorio y retiro sonda Foley a los 5 días post operatorio. No se presentaron complicaciones, el tiempo operatorio fue de 1 hora, con 1 día de estancia hospitalaria. Recuperación satisfactoria con un resultado exitoso en cuanto a la extracción completa de los cálculos en 1 sólo tiempo quirúrgico. La cistolitotomía percutánea es una opción de manejo la cual ofrece grandes ventajas. Debe ser considerada no sólo en pacientes con acceso uretral restringido.