DCM Boost interleaved converter for operation in AC and DC to trolleybus application

This paper is based on the development and experimental analysis of a DCM Boost interleaved converter suitable for application in traction systems of electrical vehicles pulled by electrical motors (Trolleybus), which are powered by urban DC or AC distribution networks. This front-end structure is capable of providing significant improvements in trolleybuses systems and in the urban distribution network costs, and efficiency. The architecture of proposed converter is composed by five boost power cells in interleaving connection, operating in discontinuous conduction mode. Furthermore, the converter can operate as AC-DC converter, or as DC-DC converter providing the proper DC output voltage range required by DC or AC adjustable speed drivers. Therefore, when supplied by single-phase AC distribution networks, and operating as AC-DC converter, it is capable to provide high power factor, reduced harmonic distortion in the input current, complying with the restrictions imposed by the IEC 61000-3-4 standards. The digital controller has been implemented using a low cost FPGA and developed totally using a hardware description language VHDL and fixed point arithmetic. Thus, two control strategies are evaluated considering the compliance with input current restrictions imposed by IEC 61000-3-4 standards, the regular PWM modulation and a current correction PWM modulation. In order to verify the feasibility and performance of the proposed system, experimental results from a 15 kW low power scale prototype are presented, operating in DC and AC conditions.

Simulation Tools of DC-DC Converters for Power Electronics Education

This paper presents interactive simulation tools to support the enhancement of power electronics education considering DC to DC converters. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive visualization of simulations in steady-state for idealized non-isolated DC to DC converters. Additionally, this paper discusses the features and the usage of the interactive educational tools to serve as a first design tool for the laboratory experiments in the power electronics courses. In this way, some results were confronted with a well-known simulator package and with experimental results in order to validate the developed interactive simulation tools.

DC Electric Field Dependence of the Dielectric Constant of Pzt Thin Films Prepared by Polymeric Precursor Method

This work reports dielectric measurements performed on Pb(Zr0.53Ti0.47)O3 (PZT) thin films prepared by a polymeric precursor method. The -E curves obtained for the PZT film measured at 100 kHz, under a small ac 0.2 kV/cm signal-test and a dc scan featured a typical butterfly curve. However, the -E curves obtained for PZT film under a dc scan, with a scan rate of 0.003 V/s, shows a pronounced asymmetry. The absence of a symmetric secondary peak in -E curves could be an indication of essentially 180 domain switching.

Leaf emergences in Microlepis oleaefolia (DC.) Triana (Melastomataceae) and their probable function: An anatomical and ultrastructural study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the antiulcerogenic and analgesic activities of Cordia verbenacea DC. (Boraginaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Baccharis dracunculifolia DC (Asteraeeae) extracts and its isolated compounds on macrophage activation

Baccharis dracunculifolia D.C. (Asteraceae), a shrub which grows wild in Brazil, is the main botanical source of Brazilian green propolis. Since Brazilian propolis shows an immunomodulatory activity, the goal of this work was to evaluate the action of B. dracunculifolia extracts and some of its isolated compounds on reactive oxygen intermediate (H2O2) production by macrophages obtained from male BALB/c mice. The results showed that the leaf (Bd-L) (25, 50, and 100 mu g mL(-1)), leaf rinse (Bd-LR) (25 mu g mL(-1)), and the root (Bd-R) (25 mu g mL(-1)) extracts enhanced H2O2 release by macrophages. A phytochemical study of the root and leaves of B. dracunculifolia was carried out. The chromatographic fractionation of Bd-R, using several techniques, afforded the isolation of baccharis oxide (1), friedelanol (2), viscidone (11), 11-hydroxy-10,11-dihydro-euparin (12), and 6-hydroxy-tremetona (13), while Bd-LR gave the following isolated compounds: baccharis oxide (1), friedelanol (2), isosakuranetin (3), aromadendrin-4'-methyl ether (4), dihydrocumaric acid (5), baccharin (6), hautriwaic acid lactone (7), hautriwaic acid acetate (8), drupanin (9), and cumaric acid (10). Among the isolated compounds, baccharis oxide (1) and friedelanol (2) increased H2O2 production at a concentration of 1001,M. This is the first time that the presence of compounds 7, 8, 12, and 13 in B. dracunculifolia has been reported. Based on these results it is suggested that the crude extracts and some isolated compounds from B. dracunculifolia display an immunomodulatory action.