Studies on oxamyl : analytical method development and investigation of fate in peach seedlings and corn seeds

A high performance liquid chromatographic method employing two columns connected in series and separated~y·a.switching valve has been developed for the analysis of the insecticide/ nematicide oxamyl (methyl-N' ,N'-dimethyl-N-[(methylcarbamoyl) oxy]-l-thiooxarnimidate) and two of its metabolites. A variation of this method involving two reverse phase columns was employed to monitor the persistence and translocation of oxamyl in treated peach seedlings. It was possible to simultaneously analyse for oxamyl and its corresponding oxime (methyl-N',N'-dimethyl-N-hydroxy-l-thiooxamimidate}, a major metabolite of oxamyl in plants, without prior cleanup of the samples. The method allowed detection of 0.058 pg oxamyl and 0.035 p.g oxime. On treated peach leaves oxamyl was found to dissipate rapidly during the first two-week period, followed by a period of slow decomposition. Movement of oxamyl or its oxime did not occur in detectable quantities to untreated leaves or to the root or soil. A second variation of the method which employed a size exclusion column as·the first column and a reverse phase column as the second was used to monitor the degradation of oxamyl in treated, planted corn seeds and was suitable for simultaneous analysis of oxamyl, its oxime and dimethylcyanoformamide (DMCF), a metabolite of oxamyl. The method allowed detection of 0.02 pg oxamyl, 0.02 p.g oxime and 0.005 pg DMCF. Oxamyl was found to persist for a period of 5 - 6 weeks, which is long enough to permit oxamyl seedtreatment to be considered as a potential means of protecting young corn plants from nematode attack. Decomposition was found to be more rapid in unsterilized soil than in sterililized soil. DMCF was found to have a nematostatic effect at high concentrations ( 2,OOOpprn), but at lower concentrations no effect on nematode mobility was observed. Oxamyl, on the other hand, was found to reduce the mobility of nematodes at concentrations down to 4 ppm.

Studies on the insecticide - nematicide-oxamyl and its quantitative determination by gas chromatographic method

Ox amyl , an insecticide/nematicide with the chemical name; methyl ~'. ~·-dimethyl-~-(methylcarbamoyl)oxy-l-thiooxamimidate, and its major degradation compound; oxime or oximino compound, methyl ~',~'-dimethyl-~-hydroxy-l-thiooxamimidate were studied in this work. NMR and mass spectrometry were utilized in the structural studies. An attempt was made to explain the fragmentation patterns of some major peaks in the mass spectra of oxamyl and oxime. A new gas chromatographic method for the detection and determination of submicrogram levels of intact oxamyl using a electron-capture detector was developed. The principle of this method is to produce a derivative which is highly sensitive to an electron-capture detector. The derivative described is dinitrophenyl methylamine( DNPMA ) • Experimental conditions such as pH , reaction temperature , reaction time, the amount of reagent ( Dinitrofluaro benzene) etc. were thoroughly investigated and optimized. This method was successfully applied to the determination of oxamyl residues in tobacco leaves and soil. Throughout this J9D:oject , thin layer chromatography was also used in the separation:and clean up of oxamyl and oxime samples.

The identification, distribution and persistence of oxamyl and its degradation products in planted corn seed, seedling root and soil from oxamyl-treated corn seeds

A simple method was developed for treating corn seeds with oxamyl. It involved soaking the seeds to ensure oxamyl uptake, centrifugation to draw off excess solution, and drying under a stream of air to prevent the formation of fungus. The seeds were found to have an even distribution of oxamyl. Seeds remained fungus-free even 12 months after treatment. The highest nonphytotoxic treatment level was obtained by using a 4.00 mg/mL oxamyl solution. Extraction methods for the determination of oxamyl (methyl-N'N'-dimethyl-N-[(methylcarbamoyl)oxy]-l-thiooxamimidate), its oxime (methyl-N',N'-dimethyl-N-hydroxy-1-thiooxamimidate), and DMCF (N,N-dimethyl-1-cyanoformanade) in seed" root, and soil were developed. Seeds were processed by homogenizing, then shaking in methanol. Significantly more oxamyl was extracted from hydrated seeds as opposed to dry seeds. Soils were extracted by tumbling in methanol; recoveries range~ from 86 - 87% for oxamyl. Root was extracted to 93% efficiency for oxamyl by homogenizing the tissue in methanol. NucharAttaclay column cleanup afforded suitable extracts for analysis by RP-HPLC on a C18 column and UV detection at 254 nm. In the degradation study, oxamyl was found to dissipate from the seed down into the soil. It was also detected in the root. Oxime was detected in both the seed and soil, but not in the root. DMCF was detected in small amounts only in the seed.

The nucleophillic substitution of various chloroanthraquinones of their possible rearrangement via aryne intermediates

The work in this thesis deals mainly with nucleophilic substitution of chloroanthraquinones as a route to various starting materials which might rearrange, via aryne intermediates to afford fused-ring heterocy1ic carboxylic acids. 1-Amino-5-chloroanthraquinone was successfully prepared by reacting 1,5-dichloroanthraquinone with sodium aZide in ref1uxing dimethylsulfoxide (DMSO). It could also be prepared from the same starting material by reaction with ammonia (gas) in DMSO in the presence of potassium fluoride. Treatment of l-amino-5-chloroanthraquinone with potassium amide in liquid ammonia or with potassium t-butoxide in t-butylbenzene returned mainly starting material, although in the latter case some 1-amino-5-hydroxyanthraquinone was also isolated. 1-Hydroxy-5-chloroanthraquinone was ultimately prepared by diazotization of the amino-analog. It was recovered almost quantitatively after treatmenu'with potassium amide in liquid ammonia. The reaction with potassium t-butoxide in t-buty1benzene was anomalous and gave 1-hydroxyanthraquinone as the only iso1able product. Acridines were successfully prepared by the action of 70% sulfuric acid on 1,5-bis(p-toluidino)-anthraquinone and 1-p-toluidino-5- ch10roanthraquinone, and in the latter case, cleavage to give an acridinecarboxylate was attempted. Substituted anthraquinones reacted with sodium azide in sulfuric acid to give azepindiones by -NH insertion. Methods for separating and identifying isomeric mixtures of these compounds were examined. Attempted decarbonylation of selected azepindiones to give acridones gave mainly what were thought to be amino-benzophenone derivatives. Chloroanthraquinones were found to react with hexamethylphosphoramide (HMPA) to give mixtures of the dimethylamino- and methylaminoderivatives. Under the same conditions halogeno-nitrobenzenes and nitrophenols were substituted to give the appropriate dimethyl aminobenzenes, except in two cases. 3-Chloronitrobenzene reacted anomalously to give a small amount of 3,3'-dichloroazobenzene and a trace of 4-dimethylamino-nitrobenzene. Pentachlorophenol reacted to give a pentachlorophenylphosphorodiamidate in good yield.

The preparation and reactions of some 1, 2-dipolar species /|nI. D. Brindle. -- 260 St. Catharines, Ont. : [s. n.],

This research was directed mainly towards the investigation of the reactions of allylic amineimides. The work can be divided into two main sections. Section 1 of the thesis deals mainly with thermolysis studies of amineimides. Sections 1a and 1b represent a comprehensive survey of amineimide literature up to 1971. N-A1ly1-N,N-dirnethylarnine-benzirnide was prepared and rearranged at 1400 to l-allyl-1-benzoyl-2,2-dimethylhydrazine. A tentative mechanism involving an initial migration to the carbonyl oxygen was disproved by incorporating the amineimide system into a five-membered ring. N,N~Dimethyl-N-propargylamine-benzimidedid not rearrange on heating; but the hydrobromide, on heating, disproportionated to give 1-benzoyl~2,2,2-trimethylhydraziniumbromide and I-benzoyl-2,2~ dimethylhydrazine. l-Ally'l--l, I-dimethyl-2-benzoy-lhydrazinium bromide and 1~benzoy-1-2,2, 2-trimethy-lhydrazinium iodide both disproportionated to give l~benzoyl-2,2-dimethylhydrazine. Section 1 concludes with a discussion of the mechanisms of ally'lic migrations in amineimides proposed by J. E. Baldwin. Section 2 deals with the formation of five-membered heterocyclic compounds from amineimides by bromination. 1,1-Dimethyl-2benzoyl- 4-bromopyrazolidinium bromide was formed from N-allyl-N,Ndime thy-lamtne-benzimide , 1,1-dimethyl-2-benzoyl-4-bromopyrazol-3enium bromide from N,N~dimethyl-N-propargylamine~benzimidevia the unusual acetylenic "bromonium" ion. Hydrogenolysis of both heterocyclic compounds gave the same product. The preparation was extended by forming 2,2-dimethyl-4-bromoisoxazolinium bromide from N-allylN, N-dimethylamine-N-oxide. Sections 3 and 4 cover a number of unsuccessful attempts to synthesise other amineimides and l,2-dipolar species.

Total synthesis of (S)-4-hydroxy-[a]-Lapachone

(S)-4-Hydroxy-a-lapachone has been prepared for the first time. The commercially available compound 2-acetyl-1-naphthol was used as the starting material. The synthesis involved methylation, followed by Baeyer-Villiger oxidation, and hydrolysis of the acetate to give 1-methoxy-2-naphthol. After protecting of the hydroxyl group, t-BuLi was used to form 3-(3',3'-dimethyl-acryloyl)-1- meth oxy-2- (meth oxymethoxy)-naphthalen e. eycl izationand oxidation then gave 4-keto-a-lapachone. Finally enzymic biotransformation by Mortierella isabellina ATCC 42613 was used to yield the target compound. The enantiomeric excess of the product was determined to be ~98% by using 1H NMR chiral shift analysis. The overall yield is 80/0. The biological activity of (S)-4-hydroxy-alapachone and its acetate are under investigation.

Characterization of the state transition in the cyanobacterium synechococcus sp. 7002 and a phycobilisome-less Mutant

ABSTRACT Photosynthetic state transitions were investigated in the cyanobacterium Synechococcus sp. PCC 7002 in both wild-type cells and mutant cells lacking phycobilisomes. Preillumination in the presence of DCMU (3(3,4 dichlorophenyl) 1,1 dimethyl urea) induced state 1 and dark adaptation induced state 2 in both wild-type and mutant cells as determined by 77K fluorescence emission spectroscopy. Light-induced transitions were observed in the wildtype after preferential excitation of phycocyanin (state 2) or preferential excitation of chlorophyll .a. (state 1). The state 1 and 2 transitions in the wild-type had half-times of approximately 10 seconds. Cytochrome f and P-700 oxidation kinetics could not be correlated with any current state transition model as cells in state 1 showed faster oxidation kinetics regardless of excitation wavelength. Light-induced transitions were also observed in the phycobilisomeless mutant after preferential excitation of short wavelength chlorophyll !l. (state 2) or carotenoids and long wavelength chlorophyll it (state 1). One-dimensional electrophoresis revealed no significant differences in phosphorylation patterns of resolved proteins between wild-type cells in state 1 and state 2. It is concluded that the mechanism of the light state transition in cyanobacteria does not require the presence of the phycobilisome. The results contradict proposed models for the state transition which require an active role for the phycobilisome.

Investigations into the determination of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by capillary gas chromatography

Factors involved in the determination of PAHs (16 priority PAHs as an example) and PCBs (10 PCB congeners, representing 10 isomeric groups) by capillary gas chromatography coupled with mass spectrometry (GC/MS, for PAHs) and electron capture detection (GC/ECD , for PCBs) were studied, with emphasis on the effect of solvent. Having various volatilities and different polarities, solvent studied included dichloromethane, acetonitrile, hexan e, cyclohexane, isooctane, octane, nonane, dodecane, benzene, toluene, p-xylene, o-xylene, and mesitylene. Temperatures of the capillary column, the injection port, the GC/MS interface, the flow rates of carrier gas and make-up gas, and the injection volume were optimized by one factor at a time method or simplex optimization method. Under the optimized conditions, both peak height and peak area of 16 PAHs, especially the late-eluting PAHs, were significantly enhanced (1 to 500 times) by using relatively higher boiling point solvents such as p-xylene and nonane, compared with commonly used solvents like benzene and isooctane. With the improved sensitivity, detection limits of between 4.4 pg for naphthalene and 30.8 pg for benzo[g,h,i]perylene were obtained when p-xylene was used as an injection solvent. Effect of solvent on peak shape and peak intensity were found to be greatly dependent on temperature parameters, especially the initial temperature of the capillary column. The relationship between initial temperature and shape of peaks from 16 PAHs and 10 PCBs were studied and compared when toluene, p-xylene, isooctane, and nonane were used as injection solvents. If a too low initial temperature was used, fronting or split of peaks was observed. On the other hand, peak tailing occurred at a too high initial column temperature. The optimum initial temperature, at which both peak fronting and tailing were avoided and symmetrical peaks were obtained, depended on both solvents and the stationary phase of the column used. On a methyl silicone column, the alkane solvents provided wider optimum ranges of initial temperature than aromatic solvents did, for achieving well-shaped symmetrical GC peaks. On a 5% diphenyl: 1% vinyl: 94% dimethyl polysiloxane column, when the aromatic solvents were used, the optimum initial temperature ranges for solutes to form symmetrical peaks were improved to a similar degree as those when the alkanes were used as injection solvents. A mechanism, based on the properties of and possible interactions among the analyte, the injection solvent, and the stationary phase of the capillary column, was proposed to explain these observations. The effect of initial temperature on peak height and peak area of the 16 PAHs and the 10 PCBs was also studied. The optimum initial temperature was found to be dependent on the physical properties of the solvent used and the amount of the solvent injected. Generally, from the boiling point of the solvent to 10 0C above its boiling point was an optimum range of initial temperature at which cthe highest peak height and peak area were obtained.

Asymmetric hydrogenation of alkenes with cationic iridium(I) complexes of 2-phosphino-1-aminoferrocene ligands

Iridium complexes with bidentate P,N ligands represent a class of catalysts that significantly expand the application range of asymmetric hydrogenation. New substrate classes, for which there have previously been no suitable catalysts, can now be efficiently hydrogenated in high conversion and enantioselectivity. These substrates are often of synthetic importance, thus iridium catalysis represents a significant advance in the field of asymmetric catalysis. Planar chiral ferrocenyl aminophosphine ligands in which both heteroatoms were directly bound to the cyclopentadienyl ring were prepared by BF3-activated lithiationsubstitution in the presence of a chiral diamine in 49-59% yield and 75-85% enantiomeric excess. Some of these ligands were recrystallized to enantiomeric purity via ammonium fluoroborate salt formation of the phosphine sulfide. A crystal structure of one of these compounds was obtained and features an intramolecular hydrogen bond between the nitrogen, hydrogen, and sulfur atoms. Neutralization, followed by desulfurization, provided the free ligands in enantiomeric purity. Iridium complexes with these ligands were formed via reaction with [Ir(COD)Clh followed by anion exchange with NaBArF. These complexes were successfully applied in homogeneous hydrogenation of several prochiral substrates, providing products in up to 92% enantiomeric excess. Variation of the dimethyl amino group to a pyrrolidine group had a negative effect on the selectivity of hydrogenation. Variation of the substituents on phosphorus to bulkier ortho-tolyl groups had a positive effect, while variation to the more electron rich dicyclohexyl phosphine had a negative effect on selectivity.

Synthesis and utilization of guanidine catalysts for applications directed towards the preparation of butenolide and modified amino acid derivatives

Development of guanidine catalysts is explored through direct iminium chloride and amine coupling, alongside a 2-chloro-l,3-dimethyl-IH-imidazol-:-3-ium chloride (DMC) induced thiourea cyclization. Synthesized achiral catalyst N-(5Hdibenzo[ d,t][1,3]diazepin-6(7H)-ylidene)-3,5-bis(trifluoromethyl) aniline proved unsuccessful towards O-acyl migrations, however successfully catalyzed the vinylogous aldol reaction between dicbloro furanone and benzaldehyde. Incorporating chirality into the guanidine catalyst utilizing a (R)-phenylalaninol auxiliary, generating (R)-2-((5Hdibenzo[ d,t] [1,3 ]diazepin-6(7H)-ylidene ) amino )-3 -phenylpropan-l-ol, demonstrated enantioselectivity for a variety of adducts. Highest enantiomeric excess (ee) was afforded between dibromofuranone and p-chlorobenzaldehyde, affording the syn conformation in 96% ee and the anti in 54% ee, with an overall yield of30%. Attempts to increase asymmetric induction were focused on incorporation of axial chirality to the (R)phenylalaninol catalyst using binaphthyl diamine. Incorporation of (S)-binaphthyl exhibited destructive selectivity, whereas incorporation of (R)-binaphthyl demonstrated no effects on enantioselectivity. Current studies are being directed towards identifying the catalytic properties of asymmetric induction with further studies are being aimed towards increasing enantioselectivity by increasing backbone steric bulk.

METHOXYPYRAZINES AND LADYBUG TAINT IN WINES

Methoxypyrazines are aroma active compounds found in many wine varietals. These compounds can be of either grape-derived nature or can be introduced into wines via Coccinellidae beetles. Regardless of their origin, methoxypyrazines can have either a beneficial role for wine quality, contributing to the specificity of certain wine varietals (Cabernet sauvignon, Cabernet franc, Sauvignon blanc) or a detrimental role, particularly at higher concentrations, resulting in overpowering green, unripe and herbaceous notes. When methoxypyrazines of exogenous nature are responsible for these unpleasant characteristics, wines are considered to be affected by what is generally known as Ladybug taint (LBT). This is work is a collection of studies seeking to create a sensitive analytical method for the detection and quantification of methoxypyrazines in wines; to investigate the role of different Coccinellidae species in the tainting of wines with LBT and identify the main compounds in ladybug tainted wines responsible for the typical green herbaceous characteristics; to determine the human detection threshold of 2,5-dimethyl-3-methoxypyrazine in wines as well as investigate its contribution to the aroma of wines; and finally to survey methoxypyrazine concentrations in a large set of wines from around the world. In the first study, an analytical method for the detection and quantitation of methoxypyrazines in wines was created and validated. The method employs multidimensional Gas Chromatography coupled with Mass Spectrometry to detect four different methoxypyrazines (2,5-dimethyl-3-methoxypyrazine, isobutyl methoxypyrazine, secbutyl methoxypyrazine and isopropyl methoxypyrazines) in wine. The low limits of detection for the compounds of interest, improved separation and isolation capabilities, good validation data, as well as the ease of use recommend this method as a good alternative to the existing analytical methods for methoxypyrazine detection in wine. In the second study the capacity of two Coccinellidae species, found in many wine regions – Harmonia axyridis and Coccinella septempunctata - to taint wines is evaluated. Coccinella septempunctata is shown to be as capable as causing LBT in wines as Harmonia axyridis. Dimethyl methoxypyrazine, previously thought to be of exogenous nature only (from Coccinellidae haemolymph), is also detected in control (untainted) wines. The main odor active compounds in LBT wines are investigated through Aroma Extract Dilution Assay. These compounds are identified as isopropyl methoxypyrazine, sec- and iso- butyl methoxypyrazine. In the third study, the human detection threshold for dimethyl methoxypyrazine in wine is established to be 31 ng/L in the orthonasal modality and 70 ng/L retronasally. After wines spiked with various amounts of dimethyl methoxypyrazine are evaluated sensorally, dimethyl methoxypyrazine causes significant detrimental effects to wine aroma at a concentration of 120 ng/L. The final study examines methoxypyrazine (dimethyl methoxypyrazine, isopropyl methoxypyrazine, secbutyl methoxypyrazine and isobutyl methoxypyrazine) concentrations in 187 wines from around the world. Dimethyl methoxypyrazine is detected in the majority of the red wines tested. Data are interpreted through statistical analyses. A new measure for predicting greenness/herbaceousness in wines - methoxypyrazine “total impact factor” is proposed.

Caractérisation structurale de la molécule HLA-DO

Les molécules classiques du CMH de classe II présentent des peptides antigéniques aux lymphocytes T CD4+. Cette présentation est régulée par deux molécules non classiques : HLA-DM catalyse la relâche de CLIP et le chargement de peptides et HLA-DO module l’activité de DM. Une expression insuffisante en cellules d’insectes empêche les expériences de cristallisation de DO, probablement en raison de sa conformation, rendant DO instable et inapte à sortir du réticulum endoplasmique (RE). DM corrige la conformation de DO et permet sa sortie du RE. Aussi, par ses ponts disulfures uniques, DM adopte une conformation stable et peut sortir du RE sans lier d’autre molécule. Nous avons tenté de corriger la conformation de DO en introduisant des cystéines pour établir des ponts homologues à ceux de DM. La conformation de DO ne fut pas corrigée. Par ailleurs, nous avons augmenté l’expression de DO en introduisant une séquence partielle de Kozak. Nous avons aussi étudié l’effet de DM sur l’expression de DO. DM a favorisé l’expression de DO, probablement en diminuant sa dégradation. Chaque chaîne du dimère DMαβ est impliquée dans l’oxydation de sa chaîne partenaire. La conformation non-optimale de DO pourrait traduire une incapacité des chaînes α ou β à favoriser l’oxydation de sa partenaire; DM corrigerait ce problème. Notre analyse d’immunobuvardage de type Western a toutefois démontré que DM ne modifie pas l’état d’oxydation de DOα et DOβ. Finalement, nous avons étudié l’interaction DO-DM. L’acide aminé DOαE41 est impliqué dans cette liaison. Certains des acides aminés entre α80 et α84 pourraient être impliqués. Nous avons muté des acides aminés de cette région de DOα. Les résidus testés ne semblent pas impliqués dans la liaison DO-DM. L’obtention de la structure tridimensionnelle de DO et la caractérisation de son état oxydatif et de sa liaison à DM permettront de mieux comprendre son rôle.

Les gènes et protéines BSP chez la souris et l’humain : clonage, caractérisation, expression sous forme recombinante et étude des fonctions biologiques

L’infertilité affecte environ 15% des couples en âge de se reproduire. Dans près de la moitié des cas, des facteurs masculins sont à la base de l’infertilité, quoique les causes exactes demeurent souvent inconnues. Les spermatozoïdes de mammifères subissent une série d’étapes de maturation avant d’acquérir la capacité de féconder un ovocyte. Les premiers changements ont lieu à l’intérieur de l’épididyme, où les spermatozoïdes gagnent la capacité de se mouvoir ainsi que de reconnaître et d’interagir avec l’ovocyte. Suite à l’éjaculation, ils doivent subir une seconde série de modifications à l’intérieur du tractus génital femelle, nommée capacitation. Nous avons préalablement démontré que chez le bovin, la famille de protéines BSP (Binder of SPerm) est essentielle à la capacitation. Des homologues des BSP ont aussi été isolés du fluide séminal de porc, de bouc, de bélier, de bison et d’étalon. Malgré la détection d’antigènes apparentés aux BSP dans le fluide séminal de souris et d’humain, les homologues des BSP n’ont jamais été caractérisés chez ces espèces. Nous avons émis l’hypothèse que des homologues des BSP seraient exprimés chez la souris et l’humain et joueraient un rôle dans la maturation des spermatozoïdes. Nous avons démontré que des séquences homologues aux BSP sont présentes dans les génomes murin et humain. Le génome murin contient trois séquences; Bsph1, Bsph2a et Bsph2b, tandis qu’une seule séquence (BSPH1) a été identifée chez l’humain. Les séquences d’ADNc de Bsph1, Bsph2a et BSPH1 ont été clonées, tandis que Bsph2b serait probablement un pseudogène. Les trois gènes sont exprimés uniquement dans l’épididyme et font partie d’une sous-famille distincte à l’intérieur de la famille des BSP. Chez les ongulés, les BSP sont exprimées par les vésicules séminales, sont ajoutées aux spermatozoïdes lors de l’éjaculation et représentent une proportion significative des protéines du plasma séminal. Au contraire, les BSP épididymaires ne sont retrouvées qu’en faibles quantités dans le fluide séminal. L’étude de leur rôle dans les fonctions spermatiques était donc plus difficile que chez les ongulés, où l’isolement des protéines natives du plasma séminal à l’aide de techniques de chromatographie était possible. Afin d’étudier sa fonction, nous avons exprimé BSPH1 recombinante dans E. coli. Les ponts disulfure des domaines de type-II caractéristiques de ces protéines ont fait en sorte que l’expression de BSPH1 fusionnée à une étiquette hexahistidine ou glutathion-S-transférase a donné lieu à des protéines insolubles dans les corps d’inclusion. La production de BSPH1 soluble a été possible grâce à l’ajout d’une étiquette thiorédoxine et l’expression dans une souche au cytoplasme oxidatif. BSPH1 a été purifiée par affinité et sa liaison aux partenaires connus des BSP, la phosphatidylcholine, les lipoprotéines de faible densité et la membrane des spermatozoïdes, suggérait que la protéine recombinante possédait sa conformation native et pouvait être utilisée pour des essais fonctionnels. La forme native de BSPH1 a été détectée dans le plasma séminal humain suite au fractionnement par gel filtration. La liaison de BSPH1 native à une colonne d’affinité à l’héparine a indiqué qu’elle partage aussi cette propriété de liaison avec la famille des BSP, et pourrait lier les GAGs semblables à l’héparine du tractus génital féminin. Une colonne d’immunoaffinité anti-BSPH1 a été préparée à l’aide d’anticorps générés contre des protéines recombinantes, et a permis d’isoler BSPH1 native à partir d’extraits de spermatozoïdes humains. Nos résultats montrent que BSPH1 native serait localisée dans les microdomaines « rafts » de la membrane. Sa masse moléculaire apparente était de 32 kDa, ce qui est supérieur à la masse prédite selon sa séquence en acides aminés, indiquant la présence probable de modifications post-traductionnelles, ou d’une migration anormale. L’effet de BSPH1 recombinante et des anticorps anti-BSPH1 sur la motilité, la viabilité et la capacitation a aussi été étudié. Les deux dernières variables ont été mesurées par un essai de cytométrie en flux, optimisé dans cette étude. Aucun effet des protéines recombinantes ou des anticorps sur la motilité et la viabilité des spermatozoïdes n’a été noté. Quoiqu’une stimulation modeste, quoique significative, de la capacitation ait été observée à la plus faible concentration de BSPH1, les concentrations plus élevées n’ont pas montré d’effet. De la même manière, les anticorps anti-BSPH1 n’ont pas eu d’effet significatif sur la capacitation. Ces résultats suggèrent que BSPH1 produite dans E. coli n’affecte pas la capacitation de façon marquée. Cependant, puisque BSPH1 native possède probablement des modifications post-traductionnelles, une protéine recombinante produite dans des cellules de mammifères pourrait affecter les fonctions spermatiques. De manière alternative, les BSP épididymaires remplissent peut-être un rôle différent dans les fonctions spermatiques que celles sécrétées par les vésicules séminales des ongulés. Les résultats décrits dans cette thèse pourraient contribuer à améliorer le diagnostic de l’infertilité masculine, ainsi que les techniques de reproduction assistée et éventuellement, pourraient mener au développement de contraceptifs masculins.

Synthesis of new zirconium complexes

L'étude suivante décrit la synthèse des ligands nacnacxylH, nacnacBnH, nacnacR,RH et nacnacCyH en utilisant une méthode générale qui implique des rendements élevés et des coûts raisonnables, la complexation de ces ligands au Zr, la caractérisation de ces complexes et l’investigation de leurs réactivités. Les complexes de zirconium ont été obtenus en utilisant deux méthodes synthétiques principales : la première consiste en traitement du sel de lithium du ligand avec le ZrCl4. La seconde est la réaction du ligand neutre avec les complexes d’alkyl-zirconium(IV) par protonation de l'alkyle coordonné. Le ligand adopte deux modes de coordination avec le Zr. Une coordination 2 est observée dans les complexes octaèdriques contenant un ou deux ligands nacnac. En présence d'un autre ligand ayant une coordonnation 5, par exemple Cp ou Ind, le ligand nacnac se trouve en coordination x avec le centre métallique de zirconium. En solution, les complexes obtenus de (nacnac)2ZrX2 montrent un comportement dynamique via un « Bailar-twist » et les paramètres d'activation de cette isomérisation ont été obtenus. Le complexe octaèdrique (nacnacBn)2ZrCl2, 2c, n'a pas montré de réactivité dans la carbozirconation et son alkylation n'était pas possible par l’échange des chlorures avec les alkyles. L’analogue dimethylé (nacnacBn)2ZrMe2, 2d, peut être préparé par alkylation du ZrCl4 avant la complexation du ligand. Ce dernier a été prouvé aussi de ne pas être réactif dans la carbozirconation.

Mécanismes moléculaires d’activation du récepteur A des peptides natriurétiques

Le récepteur A des peptides natriurétiques (NPRA) fait partie de la famille des guanylates cyclases membranaires. L’activation du NPRA par ses agonistes naturels, ANP et BNP, induit une production de GMPc qui est responsable de leur rôle dans l’homéostasie cardiovasculaire, l’inhibition de l’hypertrophie et de la fibrose cardiaques et la régulation de la lipolyse. Le NPRA est un homodimère non covalent composé d’un domaine extracellulaire de liaison du ligand (ECD), d’un unique domaine transmembranaire (TM), d’un domaine d’homologie aux kinases et d’un domaine guanylate cyclase. Bien que le NPRA ait un rôle physiologique important, les mécanismes moléculaires régissant son processus d’activation restent inconnus. Nous avons donc analysé les premières étapes du processus d’activation du NPRA. Nous avons d'abord étudié le rôle de la dimérisation des ECD dans l’activation du récepteur. Nous avons utilisé les techniques de liaison de radioligand, de FRET et de modélisation moléculaire, pour caractériser la liaison à l’ECD des agonistes naturels, d’un superagoniste et d’un antagoniste. L’ANP se lie à un dimère d’ECD préformé et la dimérisation spontanée est l’étape limitante du processus de liaison. De plus, comme le démontrent nos études de FRET, tous les peptides, incluant l’antagoniste, stabilisent le récepteur sous sa forme dimérique. Cependant, l’antagoniste A71915 stabilise le dimère d’ECD dans une conformation différente de celle induite par l’ANP. La dimérisation du NPRA semble donc nécessaire, mais non suffisante à l’activation du récepteur. L’état d’activation du NPRA dépend plutôt de l’orientation des sous unités dans le dimère. Nous avons ensuite étudié le mécanisme moléculaire de transduction du signal à travers la membrane. Plusieurs études ont suggéré que l’activation du NPRA implique un changement de conformation du domaine juxtamembranaire (JM). Cependant, les études de cristallographie de l’ECD soluble de NPRA n’ont pas permis de documenter la structure du JM et le changement de conformation impliqué dans la transduction du signal reste inconnu. Pour analyser ce changement de conformation, nous avons d’abord séquentiellement substitué les neuf acides aminés du JM par une cystéine. En étudiant la capacité des mutants à former des dimères covalents de façon constitutive ou induite par l’ANP, nous avons pu évaluer la proximité relative des résidus du JM, avant et après activation du NPRA. Ces résultats ont démontré la proximité élevée de certains résidus spécifiques et sont en contradiction avec les données cristallographiques. Nous avons également démontré que le domaine intracellulaire impose une contrainte conformationnelle au JM à l’état de base, qui est levée après liaison de l’ANP. En introduisant de 1 à 5 alanines dans l’hélice-α transmembranaire, nous avons montré qu’une rotation des TM de 40° induit une activation constitutive du NPRA. Le signal d’activation pourrait donc être transmis à travers la membrane par un mécanisme de rotation des TM. En utilisant nos données expérimentales, nous avons généré le premier modèle moléculaire illustrant la conformation active du NPRA, où les domaines JM et TM sont représentés. Dans son ensemble, cette étude apporte une meilleure compréhension des mécanismes moléculaires régissant les premières étapes du processus complexe d’activation du NPRA.