The temperature dependence of the electro-optic kerr effect in solutions

A novel Kerr cell of greater optical path length and temperature stability has been designed and built. The Kerr effect experimental has been substantially automated using an Apple IIe computer. Software has been written allowing the computer to partially control the Kerr effect equipment and to acquire and analyse the relevant data.The temperature dependent electro-optic Kerr effect of 2-methyl-4-nitroaniline, p-nitroaniline, nitrobenzene, aniline, and toluene as solutions in 1, 4-dioxane has been studied. The Kerr effect measurements combined with dipole moment, depolarisation ratio, dielectric, and electronic polarisation measurements have been used to calculate the first hyperpolarisability of the solute.Although first hyperpolarisabilities for the compounds studied have been measured in various physical states using a variety of experimental techniques, it is gratifying to find that the values presented in this thesis have a linear relationship with values reported by other workers.

Technology transfer to developing countries : the case of physical asset management in South Africa

This research investigates technology transfer (TT) to developing countries, with specific reference to South Africa. Particular attention is paid to physical asset management, which includes the maintenance of plant, equipment and facilities. The research is case based, comprising a main case study (the South African electricity utility, Eskom) and four mini-cases. A five level framework adapted from Salami and Reavill (1997) is used as the methodological basis for the formulation of the research questions. This deals with technology selection, and management issues including implementation and maintenance and evaluation and modifications. The findings suggest the Salami and Reavill (1997) framework is a useful guide for TT. The case organisations did not introduce technology for strategic advantage, but to achieve operational efficiencies through cost reduction, higher quality and the ability to meet customer demand. Acquirers favour standardised technologies with which they are familiar. Cost-benefit evaluations have limited use in technology acquisition decisions. Users rely on supplier expertise to compensate for poor education and technical training in South Africa. The impact of political and economic factors is more evident in Eskom than in the mini-cases. Physical asset management follows traditional preventive maintenance practices, with limited use of new maintenance management thinking. Few modifications of the technology or R&D innovations take place. Little use is made of explicit knowledge from computerised maintenance management systems. Low operating and maintenance skills are not conducive to the transfer of high-technology equipment. South African organisations acquire technology as items of plant, equipment and systems, but limited transfer of technology takes place. This suggests that operators and maintainers frequently do not understand the underlying technology, and like workers elsewhere, are not always inclined towards adopting technology in the workplace.

Investigating viscous fluid flow in an internal mixer using computational fluid dynamics

This thesis presents an effective methodology for the generation of a simulation which can be used to increase the understanding of viscous fluid processing equipment and aid in their development, design and optimisation. The Hampden RAPRA Torque Rheometer internal batch twin rotor mixer has been simulated with a view to establishing model accuracies, limitations, practicalities and uses. As this research progressed, via the analyses several 'snap-shot' analysis of several rotor configurations using the commercial code Polyflow, it was evident that the model was of some worth and its predictions are in good agreement with the validation experiments, however, several major restrictions were identified. These included poor element form, high man-hour requirements for the construction of each geometry and the absence of the transient term in these models. All, or at least some, of these limitations apply to the numerous attempts to model internal mixes by other researchers and it was clear that there was no generally accepted methodology to provide a practical three-dimensional model which has been adequately validated. This research, unlike others, presents a full complex three-dimensional, transient, non-isothermal, generalised non-Newtonian simulation with wall slip which overcomes these limitations using unmatched ridding and sliding mesh technology adapted from CFX codes. This method yields good element form and, since only one geometry has to be constructed to represent the entire rotor cycle, is extremely beneficial for detailed flow field analysis when used in conjunction with user defined programmes and automatic geometry parameterisation (AGP), and improves accuracy for investigating equipment design and operation conditions. Model validation has been identified as an area which has been neglected by other researchers in this field, especially for time dependent geometries, and has been rigorously pursued in terms of qualitative and quantitative velocity vector analysis of the isothermal, full fill mixing of generalised non-Newtonian fluids, as well as torque comparison, with a relatively high degree of success. This indicates that CFD models of this type can be accurate and perhaps have not been validated to this extent previously because of the inherent difficulties arising from most real processes.

Application of digital image processing techniques to the photometric testing of vehicle headlamps

The aim of this Interdisciplinary Higher Degrees project was the development of a high-speed method of photometrically testing vehicle headlamps, based on the use of image processing techniques, for Lucas Electrical Limited. Photometric testing involves measuring the illuminance produced by a lamp at certain points in its beam distribution. Headlamp performance is best represented by an iso-lux diagram, showing illuminance contours, produced from a two-dimensional array of data. Conventionally, the tens of thousands of measurements required are made using a single stationary photodetector and a two-dimensional mechanical scanning system which enables a lamp's horizontal and vertical orientation relative to the photodetector to be changed. Even using motorised scanning and computerised data-logging, the data acquisition time for a typical iso-lux test is about twenty minutes. A detailed study was made of the concept of using a video camera and a digital image processing system to scan and measure a lamp's beam without the need for the time-consuming mechanical movement. Although the concept was shown to be theoretically feasible, and a prototype system designed, it could not be implemented because of the technical limitations of commercially-available equipment. An alternative high-speed approach was developed, however, and a second prototype syqtem designed. The proposed arrangement again uses an image processing system, but in conjunction with a one-dimensional array of photodetectors and a one-dimensional mechanical scanning system in place of a video camera. This system can be implemented using commercially-available equipment and, although not entirely eliminating the need for mechanical movement, greatly reduces the amount required, resulting in a predicted data acquisiton time of about twenty seconds for a typical iso-lux test. As a consequence of the work undertaken, the company initiated an 80,000 programme to implement the system proposed by the author.

Improvements to the arc-spraying process

After a brief review of the various forms of thermal spraying equipment and processes, descriptions of the basic principles involved and the general functions for which thermally sprayed coatings are used are given. The background of the collaborating company, Metallisation, is described and their position in the overall market discussed, providing a backdrop against which the appropriateness of various project options might be judged. Current arc-spraying equipment is then examined, firstly in terms of the workings of their constituent parts and subsequently by examining the effects of changes in design and in operating parameters both upon equipment operation and the coatings produced. Published literature relating to these matters is reviewed. Literature relating to the production, comminution and propulsion of the particles which form the spray is discussed as are the mechanisms involved at impact with the substrate. Literature on the use of rockets for thermal spraying and induction heating as a process for feedstock melting are also reviewed. Three distinct options for further study are derived and preliminary tests and costings made to allow one option alone, the use of rocket acceleration, to go forward to the experimental phase. A suitable rocket burner was developed, tested and incorporated into an arc-spray system so that the sprayability of the whole could be assessed. Coatings were made using various parameters and these are compared with coatings produced by a standard system. Coatings were examined for macro and micro hardness, cohesive strength, porosity and by microstructural examination. The results indicate a high degree of similarity between the coatings produced by the standard system and the high velocity system. This was surprising in view of the very different atomising media and velocities. Possible causes for this similarity and the general behaviour of this new system and the standard system are discussed before the study reaches its conclusions in not proving the hypothesis that an increase in particle velocity would improve the mechanical properties of arc-sprayed steel coatings. KEY WORDS: Sprayed metal coatings, Electric arc spraying, High velocity flame spraying, Sprayed coating properties

Technical innovation in industrial production

New techniques in manufacturing, popularly referred to as mechanization and automation, have been a preoccupation of social and economic theorists since the industrial revolution. A selection of relevant literature is reviewed, including the neoclassical economic treatment of technical change. This incorporates alterations to the mathematical production function and an associated increase in the efficiency with which the factors of production are converted into output. Other work emphasises the role of research and development and the process of diffusion, whereby new production techniques are propagated throughout industry. Some sociological writings attach importance to the type of production technology and its effect on the organisational structure and social relations within the factory. Nine detailed case studies are undertaken of examples of industrial innovation in the rubber, automobile, vehicle components, confectionery and clothing industries. The old and new techniques are compared for a range of variables, including capital equipment, labour employed, raw materials used, space requirements and energy consumption, which in most cases exhibit significant change with the innovation. The rate of output, labour productivity, product quality, maintenance requirements and other aspects are also examined. The process by which the change in production method was achieved is documented, including the development of new equipment and the strategy of its introduction into the factory, where appropriate. The firm, its environment, and the attitude of different sectors of the workforce are all seen to play a part in determining the motives for and consequences which flow from the innovations. The traditional association of technical progress with its labour-saving aspect, though an accurate enough description of the cases investigated, is clearly seen to afford an inadequate perspective for the proper understanding of this complex phenomenon, which also induces change in a wide range of other social, economic and technical variables.

The vision strategy of golf putting

Golfers, coaches and researchers alike, have all keyed in on golf putting as an important aspect of overall golf performance. Of the three principle putting tasks (green reading, alignment and the putting action phase), the putting action phase has attracted the most attention from coaches, players and researchers alike. This phase includes the alignment of the club with the ball, the swing, and ball contact. A significant amount of research in this area has focused on measuring golfer’s vision strategies with eye tracking equipment. Unfortunately this research suffers from a number of shortcomings, which limit its usefulness. The purpose of this thesis was to address some of these shortcomings. The primary objective of this thesis was to re-evaluate golfer’s putting vision strategies using binocular eye tracking equipment and to define a new, optimal putting vision strategy which was associated with both higher skill and success. In order to facilitate this research, bespoke computer software was developed and validated, and new gaze behaviour criteria were defined. Additionally, the effects of training (habitual) and competition conditions on the putting vision strategy were examined, as was the effect of ocular dominance. Finally, methods for improving golfer’s binocular vision strategies are discussed, and a clinical plan for the optometric management of the golfer’s vision is presented. The clinical management plan includes the correction of fundamental aspects of golfers’ vision, including monocular refractive errors and binocular vision defects, as well as enhancement of their putting vision strategy, with the overall aim of improving performance on the golf course. This research has been undertaken in order to gain a better understanding of the human visual system and how it relates to the sport performance of golfers specifically. Ultimately, the analysis techniques and methods developed are applicable to the assessment of visual performance in all sports.

ProxiMAX randomisation:a new technology for non-degenerate saturation mutagenesis of contiguous codons

Back in 2003, we published ‘MAX’ randomisation, a process of non-degenerate saturation mutagenesis using exactly 20 codons (one for each amino acid) or else any required subset of those 20 codons. ‘MAX’ randomisation saturates codons located in isolated positions within a protein, as might be required in enzyme engineering, or else on one face of an alpha-helix, as in zinc finger engineering. Since that time, we have been asked for an equivalent process that can saturate multiple, contiguous codons in a non-degenerate manner. We have now developed ‘ProxiMAX’ randomisation, which does just that: generating DNA cassettes for saturation mutagenesis without degeneracy or bias. Offering an alternative to trinucleotide phosphoramidite chemistry, ProxiMAX randomisation uses nothing more sophisticated than unmodified oligonucleotides and standard molecular biology reagents. Thus it requires no specialised chemistry, reagents nor equipment and simply relies on a process of saturation cycling comprising ligation, amplification and digestion for each cycle. The process can encode both unbiased representation of selected amino acids or else encode them in pre-defined ratios. Each saturated position can be defined independently of the others. We demonstrate accurate saturation of up to 11 contiguous codons. As such, ProxiMAX randomisation is particularly relevant to antibody engineering.

ProxiMAX randomisation:a new technology for non-degenerate saturation mutagenesis of contiguous codons

Back in 2003, we published ‘MAX’ randomisation, a process of non-degenerate saturation mutagenesis using exactly 20 codons (one for each amino acid) or else any required subset of those 20 codons. ‘MAX’ randomisation saturates codons located in isolated positions within a protein, as might be required in enzyme engineering, or else on one face of an alpha-helix, as in zinc finger engineering. Since that time, we have been asked for an equivalent process that can saturate multiple, contiguous codons in a non-degenerate manner. We have now developed ‘ProxiMAX’ randomisation, which does just that: generating DNA cassettes for saturation mutagenesis without degeneracy or bias. Offering an alternative to trinucleotide phosphoramidite chemistry, ProxiMAX randomisation uses nothing more sophisticated than unmodified oligonucleotides and standard molecular biology reagents. Thus it requires no specialised chemistry, reagents nor equipment and simply relies on a process of saturation cycling comprising ligation, amplification and digestion for each cycle. The process can encode both unbiased representation of selected amino acids or else encode them in pre-defined ratios. Each saturated position can be defined independently of the others. We demonstrate accurate saturation of up to 11 contiguous codons. As such, ProxiMAX randomisation is particularly relevant to antibody engineering.

Application of Network Technologies for Development of Medical Data-advisory Clinic “Med-Health”

In this article the medical data-advisory web-resource developed by authors is considered. This resource allows carrying out information interchange between consumers of medical services and the medical establishments which give these services, and firms-manufacturers of medical equipment and medicaments. Main sections of this web-site, their purposes and capabilities are considered in this article.

Properties of ultra fast deposited diamond-like hydrogenated carbon films

Hydrogenated amorphous carbon films with diamond like structures have been formed on different substrates at very low energies and temperatures by a plasma enhanced chemical vapor deposition process employing acetylene as the precursor gas. The plasma source was of a cascaded arc type with Ar as carrier gas. The films were grown at very high deposition rates. Deposition on Si, glass and plastic substrates has been studied and the films characterized in terms of sp3 content, roughness, hardness, adhesion and optical properties. Deposition rates up to 20 nm/s have been achieved at substrate temperatures below 100°C. The typical sp3 content of 60-75% in the films was determined by X-ray generated Auger electron spectroscopy. Hardness, reduced modulus and adhesion were measured using a MicroMaterials Nano Test Indenter/Scratch tester. Hardness was found to vary from 4 to 13 GPa depending on deposition conditions. Adhesion was significantly influenced by the substrate temperature and in situ DC cleaning. Hydrogen content in the film was measured by a combination of the Fourier transform infrared and Rutherford backscattering techniques. Advantages of these films are: low ion energy and deposition temperature, very high deposition rates, low capital cost of the equipment and the possibility of film properties being tailored according to the desired application.

Market definition in industrial high-technology markets

This dissertation analyzes how marketers define markets in technology-based industries. One of the most important strategic decisions marketers face is determining the optimal market for their products. Market definition is critical in dynamic high technology markets characterized by high levels of market and technological uncertainty. Building on literature from marketing and related disciplines, this research is the first in-depth study of market definition in industrial markets. Using a national, probability sample stratified by firm size, 1,000 marketing executives in nine industries (automation, biotechnology, computers, medical equipment and instrumentation, pharmaceuticals, photonics, software, subassemblies and components, and telecommunications) were surveyed via a mail questionnaire. A 20.8% net response rate yielding 203 surveys was achieved. The market structure-conduct-performance (SCP) paradigm from industrial organization provided a conceptual basis for testing a causal market definition model via LISREL. A latent exogenous variable (competitive intensity) and four latent endogenous variables (marketing orientation, technological orientation, market definition criteria, and market definition success) were used to develop and test hypothesized relationships among constructs. Research questions relating to market redefinition, market definition characteristics, and internal (within the firm) and external (competitive) market definition were also investigated. Market definition success was found to be positively associated with a marketing orientation and the use of market definition criteria. Technological orientation was not significantly related to market definition success. Customer needs were the key market definition characteristic to high-tech firms (technology, competition, customer groups, and products were also important). Market redefinition based on changing customer needs was the most effective of seven strategies tested. A majority of firms regularly defined their market at the corporate and product-line level within the firm. From a competitive perspective, industry, industry sector, and product-market definitions were used most frequently.

A planning model for needs analysis for subacute care

The purpose of this study is to produce a model to be used by state regulating agencies to assess demand for subacute care. In accomplishing this goal, the study refines the definition of subacute care, demonstrates a method for bed need assessment, and measures the effectiveness of this new level of care. This was the largest study of subacute care to date. Research focused on 19 subacute units in 16 states, each of which provides high-intensity rehabilitative and/or restorative care carried out in a high-tech unit. Each of the facilities was based in a nursing home, but utilized separate staff, equipment, and services. Because these facilities are under local control, it was possible to study regional differences in subacute care demand.^ Using this data, a model for predicting demand for subacute care services was created, building on earlier models submitted by John Whitman for the American Hospital Association and Robin E. MacStravic. The Broderick model uses the "bootstrapping" method and takes advantage of high technology: computers and software, databases in business and government, publicly available databases from providers or commercial vendors, professional organizations, and other information sources. Using newly available sources of information, this new model addresses the problems and needs of health care planners as they approach the challenges of the 21st century. ^

The development of direct ultra-fast PCR for forensic genotyping using short channel microfluidic systems with enhanced sieving matrices

There are situations in which it is very important to quickly and positively identify an individual. Examples include suspects detained in the neighborhood of a bombing or terrorist incident, individuals detained attempting to enter or leave the country, and victims of mass disasters. Systems utilized for these purposes must be fast, portable, and easy to maintain. The goal of this project was to develop an ultra fast, direct PCR method for forensic genotyping of oral swabs. The procedure developed eliminates the need for cellular digestion and extraction of the sample by performing those steps in the PCR tube itself. Then, special high-speed polymerases are added which are capable of amplifying a newly developed 7 loci multiplex in under 16 minutes. Following the amplification, a postage stamp sized microfluidic device equipped with specially designed entangled polymer separation matrix, yields a complete genotype in 80 seconds. The entire process is rapid and reliable, reducing the time from sample to genotype from 1-2 days to under 20 minutes. Operation requires minimal equipment and can be easily performed with a small high-speed thermal-cycler, reagents, and a microfluidic device with a laptop. The system was optimized and validated using a number of test parameters and a small test population. The overall precision was better than 0.17 bp and provided a power of discrimination greater than 1 in 106. The small footprint, and ease of use will permit this system to be an effective tool to quickly screen and identify individuals detained at ports of entry, police stations and remote locations. The system is robust, portable and demonstrates to the forensic community a simple solution to the problem of rapid determination of genetic identity.

Building Regional Security: Cooperation in the 21st Century: The Case of the Caribbean Regional Security System [RSS]

Small states that lack capacity and act on their own may fall victim to international and domestic terrorism, transnational organized crime or criminal gangs. The critical issue is not whether small Caribbean states should cooperate in meeting security challenges, but it is rather in what manner, and by which mechanisms can they overcome obstacles in the way of cooperation. The remit of the Regional Security System (RSS) has expanded dramatically, but its capabilities have improved very slowly. The member governments of the RSS are reluctant to develop military capacity beyond current levels since they see economic and social development and disaster relief as priorities, requiring little investment in military hardware. The RSS depends on international donors such as the USA, Canada, Great Britain, and increasingly China to fund training programs, maintain equipment and acquire material. In the view of most analysts, an expanded regional arrangement based on an RSS nucleus is not likely in the foreseeable future. Regional political consensus remains elusive and the predominance of national interests over regional considerations continues to serve as an obstacle to any CARICOM wide regional defense mechanism. Countries in the Caribbean, including the members of the RSS, have to become more responsible for their own security from their own resources. While larger CARICOM economies can do this, it would be difficult for most OECS members of the RSS to do the same. The CARICOM region including the RSS member countries, have undertaken direct regional initiatives in security collaboration. Implementation of the recommendations of the Regional Task Force on Crime and Security (RTFCS) and the structure and mechanisms created for the staging of the Cricket World Cup (CWC 2007) resulted in unprecedented levels of cooperation and permanent legacy institutions for the regional security toolbox. The most important tier of security relationships for the region is the United States and particularly USSOUTHCOM. The Caribbean Basin Security Initiative [CBSI] in which the countries of the RSS participate is a useful U.S. sponsored tool to strengthen the capabilities of the Caribbean countries and promote regional ownership of security initiatives. Future developments under discussion by policy makers in the Caribbean security environment include the granting of law enforcement authority to the military, the formation of a single OECS Police Force, and the creation of a single judicial and law enforcement space. The RSS must continue to work with its CARICOM partners, as well as with the traditional “Atlantic Powers” particularly Canada, the United States and the United Kingdom to implement a general framework for regional security collaboration. Regional security cooperation should embrace wider traditional and non-traditional elements of security appropriate to the 21st century. Security cooperation must utilize to the maximum the best available institutions, mechanisms, techniques and procedures already available in the region. The objective should not be the creation of new agencies but rather the generation of new resources to take effective operations to higher cumulative levels. Security and non-security tools should be combined for both strategic and operational purposes. Regional, hemispheric, and global implications of tactical and operational actions must be understood and appreciated by the forces of the RSS member states. The structure and mechanisms, created for the staging of Cricket World Cup 2007 should remain as legacy institutions and a toolbox for improving regional security cooperation in the Caribbean. RSS collaboration should build on the process of operational level synergies with traditional military partners. In this context, the United States must be a true partner with shared interests, and with the ability to work unobtrusively in a nationalistic environment. Withdrawal of U.S. support for the RSS is not an option.