New species of Nanexila Winterton & Irwin and Taenogera Krober from Australia (Diptera: Therevidae)

Two new species are described in each of the closely related genera Nanexila Winterton & Irwin and Taenogera Krober. Nanexila atricauda sp. nov. and Nanexila jimrodmani sp. nov. are described. The phylogenetic placement and diagnostic characteristics of these new species and other species recently transferred to Nanexila are discussed. Taenogera luteola sp. nov. and Taenogera brunnea sp. nov. are distinctive species described from female specimens collected in Queensland. Taenogera is diagnosed in light of these new species and a revised key to species presented.

Kaurimyia gen. nov.: Discovery of Apsilocephalidae (Diptera: Therevoid clade) in New Zealand

A new genus (Kaurimyia thorpei gen. et sp. nov.) of the enigmatic fly family Apsilocephalidae (Asiloidea) is described from New Zealand. Kaurimyia thorpei gen. et sp. nov. is described and figured from male and female specimens, one of which was collected in Kauri forest near Auckland (North Island). While superficially similar to Apsilocephala Krober, this new genus shows closer affinities to Clesthentia White (=Clesthentiella Nagatomi, Saigusa, Nagatomi et Lyneborg syn. nov.) from Tasmania based on genitalic characters such as aedeagus shape and non-articulated surstyli. Apsilocephalidae is presently known from just a few extant species in North America and Tasmania (Australia), although extinct species are recorded from the Holarctic and Oriental regions. This is the first description of the family from New Zealand.

Development of hazard site surveillance programs for forest invasive species: A case study from Brisbane, Australia

Hazard site surveillance is a system for post-border detection of new pest incursions, targeting sites that are considered potentially at high risk of such introductions. Globalisation, increased volumes of containerised freight and competition for space at domestic ports means that goods are increasingly being first opened at premises some distance from the port of entry, thus dispersing risk away from the main inspection point. Hazard site surveillance acts as a backstop to border control to ensure that new incursions are detected sufficiently early to allow the full range of management options, including eradication and containment, to be considered. This is particularly important for some of the more cryptic forest pests whose presence in a forest often is not discovered until populations are already high and the pest is well established. General requirements for a hazard site surveillance program are discussed using a program developed in Brisbane, Australia, in 2006 as a case study. Some early results from the Brisbane program are presented. In total 67 species and 5757 individuals of wood-boring beetles have been trapped and identified during the program to date. Scolytines are the most abundant taxa, making up 83% of the catch. No new exotics have been trapped but 19 of the species and 60% of all specimens caught are exotics that are already established in Australia.

Texture strengthening in warm-rolled cadmium-1% silver alloy

The variation in the tensile properties at 77 K and 300 K in warm-rolled (300 K) Cd-1% Ag alloy with deformation has been studied in longitudinal as well as transverse specimens. The low-temperature yield strength increases with warm rolling without much loss in ductility. The strength at 300 K, however, decreases with heavy warm deformation. From microstructural studies and X-ray investigations, it was observed that changes in grain size and texture occur during warm rolling. Both these changes are found to be important in deciding the tensile properties. The longitudinal and transverse strengths at 77 K vary linearly with l-frac12, where l is the average grain diameter, and thus they obey the Hall-Petch relation. The Hall-Petch slope, k, is lower in specimens with favourable lcub1013rcub texture while the intercept σo is higher when the lcub0002rcub texture is less favourable.

Peronospora lamii on Lamiaceae in Australia

A detailed description and illustration of the Australian specimens of Peronospora lamii on Salvia spp. and on Lamium amplexicaule (Lamiaceae) are given.

Encroachment of Echinococcus granulosus into urban areas in eastern Queensland, Australia

Objective: To investigate the prevalence of Echinococcus granulosus in wild dogs (dingos and dingo-domestic dog hybrids) living in and around human habitation on Fraser Island and in townships of the Maroochy Shire, on Queensland's Sunshine Coast, Australia. Design: Wild dogs were humanely killed on Fraser Island and in the Maroochy Shire because they were deemed a potential danger to the public. Their intestines were collected and the contents examined for intestinal parasites. Procedure: Intestines were removed as soon after death as possible, packed in plastic bags and kept frozen until examination. The intestinal contents were washed, sieved and examined microscopically for the presence of helminths, which were identified and counted. Results: Intestines from 108 wild dogs, 7 foxes and 18 Fraser Island dingoes were examined. Echinococcus granulosus was only present in the wild dogs from Maroochy Shire (46.3%) with worm burdens of between 30 and 104,000. Other helminths included Spirometra erinacei, Dipylidium caninum, Taenia spp., Ancylostoma caninum and Toxocara canis. Two specimens of a trematode (Haplorchinae sp.) usually found infecting fish and seabirds were recovered from a Fraser Island dingo. Conclusion: Dingoes on Fraser Island are not infected with E. granulosus and do not pose a hydatid disease public health risk to residents or visitors. However, wild dogs examined from the Maroochy Shire do present a potential hydatid disease public health risk.

Mechanical performances of track-shaped rebar stiffened concrete-filled steel tubular (SCFRT) stub columns under axial compression

This paper presents a combined experimental, numerical, and theoretical study on the mechanical behaviors of track-shaped concrete-filled steel tubular (SCFRT) stub columns stiffened by rebars under compressive load. A total of 18 track-shaped concrete-filled steel tubular specimens including 12 specimens stiffened by rebars and 6 non-stiffened counterparts are tested, with consideration of parameters including flakiness ratio, concrete strength, and stiffeners. Failure pattern, bearing capacity, and ductility are all analyzed and discussed based on the experimental results. The numerical simulation by finite element (FE) software ABAQUS is also conducted. Based on both experimental and numerical results, theoretical formula to predict the load-bearing capacity of SCFRT stub columns subjected to axial compression loading is established according to the superposition principle of ultimate load-bearing capacity with rational simplification. The proposed theoretical method provides accurate predictions on the load bearing capacity by comparing with experimental results from 18 groups of specimens.

Powdery mildew on Passiflora in Australia

Oidiopsis sp., the anamorph of Leveillula taurica (Erysiphaceae), is reported for the first time in Australia on Passiflora edulis, and Oidium passiflorae on Passiflora foetida. A detailed description and illustration of the specimens are given.

Oidiopsis (Erysiphaceae) on Euphorbia spp. in Australia and Vanuatu

One specimen of powdery mildew on Euphorbia cyathophora from Vanuatu and 11 specimens on E. cyathophora, E. dentata, E. heterophylla and E. leucocephala from Australia were studied. All were shown to represent the Oidiopsis anamorph of Leveillula taurica, which is described. This is the first record of Oidiopsis in Vanuatu. E. leucocephala is a new host record for this powdery mildew.

Deformation processing of an aluminum alloy containing particles: Studies on AI-5 pct Si alloy 4043

Al-5 wt pct Si alloy is processed by upset forging in the temperature range 300 K to 800 K and in the strain rate range 0.02 to 200 s−1. The hardness and tensile properties of the product have been studied. A “safe” window in the strain rate-temperature field has been identified for processing of this alloy to obtain maximum tensile ductility in the product. For the above strain rate range, the temperature range of processing is 550 K to 700 K for obtaining high ductility in the product. On the basis of microstructure and the ductility of the product, the temperature-strain rate regimes of damage due to cavity formation at particles and wedge cracking have been isolated for this alloy. The tensile fracture features recorded on the product specimens are in conformity with the above damage mechanisms. A high temperature treatment above ≈600 K followed by fairly fast cooling gives solid solution strengthening in the alloy at room temperature.

An Exact Analysis of Unsteady Convective Diffusion in an Annular Pipe

An exact solution to the unsteady convective diffusion equation for the dispersion of a solute in a fully developed laminar flow in an annular pipe is obtained. Generalized dispersion model which is valid for all time after the injection of solute in the flow is used to evaluate the dispersion coefficients as functions of time. It is observed that the axial dispersion decreases with an increase in the radius of the inner cylinder.

Alfven surface waves along a cylindrical plasma column surrounded by neutral gas

The dispersion characteristics of Alfven surface waves along a cylindrical plasma column insulated by a neutral gas are discussed. There is no qualitative change in the characteristic curves below the critical magnetic field, given by vA approximately=s, as compared to the propagation of surface waves along the plasma-plasma interface. For magnetic fields above this critical value, there exists a cut-off wave number kc, which depends upon the azimuthal wave number, the radius of the cylinder, the strength of the magnetic field above the critical value and the gas pressure, such that surface waves do not exist for k

On the wear of aluminium-corundum composites

The effect of corundum particle content on the wear of aluminium was studied. Composites of different corundum contents were tested for their wear characteristics. Hardness and density measurements were made on specimens before and after test. Specimens were examined by scanning electron microscopy in the as-compacted, sintered and worn states. The wear decreased as the oxide content increased, showing an optimum value at a composition range of 25 wt.%–35 wt.% of corundum. The mechanism of reinforcement and its effect on the operative wear mode are discussed.

Clinical and pathological findings associated with congenital hypovitaminosis A in extensively grazed beef cattle

To determine the cause of exceptionally high mortality (41.4%) in perinatal calves on a beef cattle property 50 km south-west of Julia Creek in north-western Queensland. Investigations were based on clinical assessment of affected calves and laboratory analysis of pre- and postmortem specimens taken from 12 calves aged from 6 to 36 h of age. Associations between gross and histopathological findings and biochemical analyses conducted on serum and tissue samples were examined in relation to clinical observations. Clinical signs varied, but commonly included mild to severe ataxia, difficulty finding a teat and sucking, blindness (partial or complete, as judged by avoidance of obstacles) and depression with prominent drooping of the head. Gross and histopathological findings included herniation of the cerebellar vermis through the foramen magnum, squamous metaplasia of interlobular ducts in the parotid salivary glands and Wallerian degeneration of the optic nerves. Biochemical analysis of serum and liver samples available from four of the calves revealed low or undetectable levels of both vitamin A and vitamin E. Although vitamin E is known to have a sparing effect on vitamin A, the role (if any) played by deficiency of this vitamin was uncertain. The combination of clinical signs, postmortem findings, histopathological features and biochemical findings indicate that gestational vitamin A deficiency was highly likely to have been an important contributor to perinatal calf mortalities in this herd.

Note On The Stability Of Parallel Magnetic-Fields - Comment

It is shown that the conclusions arrived at regarding the instability of an incompressible fluid cylinder in the presence of the magnetic field and the streaming velocity in a recent communication easily follow from the study of propagation characteristics of Alfvén surface waves along cylindrical plasma columns made earlier.