Metal-insulator transitions in pressed pellets of BF4 - doped poly(3-methylthiophene)

From Electron Spin Resonance (ESR) data in pressed pellets of BF4 - doped Poly(3-methylthiophene) (P3MT) we obtained simultaneously the paramagnetic susceptibility and. the microwave conductivity. We observed a transition from a high-temperature insulator state to a room-temperature metallic state. Around 240K. evidence of a Peierls transition is observed, but if the sample is slowly cooled, this transition is partially suppressed. DC conductivity data taken with the sample quenched to 79 K show a non-linear I-V response for very small electric fields, suggesting depinning of Charge-Density Wave (CDW). The data for heating and cooling the system above room temperature, indicate the formation of bipolarons.

Study of some brazilian myrtaceae in jaboticabal-sp

The family Myrtaceae is one of the most important related to fruit species. In Brazil it encloses more than 100 species of native fruit from North to South of the country (Giacometti, 1992; Donadio, 1992; Mattos, 1992). The genus Eugenia, Campomanesia, Psidium and Myrciaria are the most important, grouping most of the species of some importance. The germplasm bank of the Universidade Estadual Paulista includes some of the major species. Some characteristics are typical for most of the Myrtaceae fruit species. The most relevant are the long juvenile period presented by the trees, taking long time to produce, when propagated by seed; the slow growing tree behavior; difficult to propagated by vegetative means; large variability in trees obtained by seed propagation. The cited characteristics are commented for some species as well as the fruit quality, from data obtained in trees at the same ecological conditions. The species evaluated are: 1) Eugenia stipitata Me Vaugh; 2) Eugenia tomentosa Cambes; 3) Eugenia brasiliensis Lam.; 4) Eugenia uniflora L.; 5) Eugenia luchsnathiana Berg.; 6) Eugenia uvalha Cambess; 7) Camponesia spp; 8) Plinia edulis (Veil. Sobral); 9) Eugenia involucrata D.C.; 10) Psidium acutangulum Mart.; 11) Myrciaria dubia Me Vaugh; 12) Eugenia guabiju Berg. The main conclusions based on the data analysed are: The fruits of some species present good general characteristics, mainly for fresh consumption, as high Vitamin C, sugars, pulp and other characteristics; 'Araca-boi' presents some good fruit characteristics, but is more adapted for processing, by its high acidity; Some species present low % of edible portion and need to be improved to gain commercial acceptance, mainly the 'cabeludinha' and 'cambuca'.

Synergistic actions of 50°C water and imazalil dip treatments to preserve quality of late-season 'Marsh' grapefruit

Late-season grapefruits (Citrus paradisi Macf. cv. Marsh seedless) were dipped in water at 50°C for 3 min with and without 200 ppm imazalil (IMZ) or 1000 ppm IMZ at 19°C and were subsequently stored at 7°C and 90-95% relative humidity (RH) for 11 weeks plus one week at 21°C and approximately 75% RH to simulate a marketing period (SMP). Residue concentrations in fruit after treatment with 200 ppm IMZ at 50°C were 3.46 ppm, about twice the level (1.80 ppm) found in fruit treated with 1000 ppm IMZ at 19°C. Fungicide degradation rates during storage showed similar patterns resulting in an approximately 50% decrease. Both fungicide treatments significantly reduced decay and chilling injury (CI) during storage and SMP. Hot water reduced CI and decay but not as effectively as the IMZ treatments. Soluble solids concentrations were not affected by treatments, IMZ treatments resulted in significantly lower values of titratable acidity and higher concentrations of ethanol in the juice after SMP. Weight loss was significantly higher in fruit dipped in water at 50°C after SMP. No visible damage occurred to the fruit as a result of any of the treatments.

Energy transfer between Pr3+ ions in a fluoroindate glass

The efficiency of energy transfer (ET) between Pr3+ ions in a fluoroindate glass is determined. ET rates, WET, were determined for dilute samples and the results show a dependence of WET on the Pr3+ concentration. ET processes which contribute to resonance fluorescence and frequency upconversion emission were studied. The origin of the interaction energy among the Pr3+ ions was determined to be dipole - dipole. © 1998 Elsevier Science B.V. All rights reserved.

In(PO3)3 stabilised fluoroindate glasses

Results on thermal and optical characterization of new lanthanide containing fluoroindate glasses in the system InF3-BaF2-In(PO3)3 are presented. Good optical quality and very stable glasses presenting up to 5 mm in thickness could be prepared in this system. Thermal analysis, Raman scattering and Eu3+ luminescence were the techniques utilized. A novel method for In(PO3)3 synthesis is proposed and the dependence of physical properties and structural features on the polyphosphate content is stressed. © 1998 Elsevier Science S.A.

Efeitos da adubação com manipueira sobre o rendimento e qualidade dos frutos de tomate

The objective of this research was to evaluate the residue from cassava, known as manipueira, as an alternative for tomato (Lycopersicon esculentum) fertilization. This experiment was carried out in UNESP with the cultivar Rio Grande. The experimental design was a completely randomized blocks in a 3 × 3 factorial arrangement with five blocks. Treatments constituted the following: 1) witness; 2) 54 m3/ha of manipueira; 3) 108 m3/ha of manipueira; 4) half recommended mineral fertilization; 5) half recommended mineral fertilization + 54 m3/ha of manipueira; 6) half recommended mineral fertilization + 108 m3/ha of manipueira; 7) recommended mineral fertilization; 8) recommended mineral fertilization + 54 m3/ha of manipueira and 9) recommended mineral fertilization + 108 m3/ha of manipueira. Tomato yield, number of fruits per plant, fruit diameter and lenght, total soluble solids (TSS), total titratable acidity (TTA) and the ratio TSS/TTA were evaluated. The results obtained indicated that manipueira contributed significantly to yield and quality of pos-harvested tomato fruits.

Temporal variation in C, N and P of the periphyton on the tropical aquatic macrophyte echinochloa polystachya (H.B.K.) hitch. In Jurumirim Reservoir (São Paulo, Brazil)

The temporal variations in C, N and P concentrations of the periphyton on the natural substratum (Echinochloa polystachya) and its relationships to the water's climatological (air temperature and precipitation), hydrodynamic (water discharge and water level), physical (temperature, transparency) and chemical variables (conductivity, total suspended solids, nitrate, nitrite, ammonia, silica, total phosphorus and orthophosphate) were evaluated in a lagoon at the Paranapanema River mouth into the Jurumirim Reservoir (São Paulo, Brazil) from August 1993 to July 1994. An amplitude variation of 2.0 m in water level was observed. Depending on to the hydrologic conditions, the lagoon presents intermediate conditions of lentic and lotic environments. The amplitude variations in C, N and P were 14.5-52.1% C DW-1, 0.5-3.2% N DW-1, and 0.03-0.4% P DW-1, respectively. The periphyton presented a decreased protein content. The environmental trophic degree appears to be decisive in chemical periphyton composition.

Universal scaling in BCS superconductivity in three dimensions in non-s waves

The solutions of a renormalized BCS equation are studied in three space dimensions in s, p and d waves for finite-range separable potentials in the weak to medium coupling region. In the weak-coupling limit, the present BCS model yields a small coherence length ξ and a large critical temperature, T c, appropriate for some high-T c materials. The BCS gap, T c, ξ and specific heat C s(T c) as a function of zero-temperature condensation energy are found to exhibit potential-independent universal scalings. The entropy, specific heat, spin susceptibility and penetration depth as a function of temperature exhibit universal scaling below T c in p and d waves.

Giant non-linear absorption in Er3+-doped fluoroindate glass

Non-linear absorption is observed in Er3+-doped fluoroindate glass (in mol% 37InF2:20ZnF2:20SrF2:16BaF2:2GdF2: 2NaF:1GaF3:2ErF3) when the sample is irradiated with a CW laser emitting at 650 nm. An intensity dependence of the optical transmittance is detected. Saturation and sequential absorption of two photons are responsible for the decrease of 50% in the transmittance. The results are explained by simple models which are solved based on rate-equations for the populations of energy levels.

Determination of mercury in agroindustrial samples by flow-injection cold vapor atomic absorption spectrometry using ion exchange and reductive elution

A flow-injection system with a Chelite-S® cationic resin packed minicolumn is proposed for the determination of trace levels of mercury in agroindustrial samples by cold vapor atomic absorption spectrometry. Improved sensitivity and selectivity are attained since mercuric ions are on-line concentrated whereas other potential interferents are discarded. With on-line reductive elution procedure, concentrated hydrochloric acid could be replaced by 10% w/v SnCl2, in 6 M HCl as eluent. The reversed-intermittent stream either carries the atomic mercury, to the flow cell in the forward direction or removes the residue from reactor/gas liquid separator to a discarding flask in the opposite direction. Concentration and volume of reagent, acidity, flow rates, commutation times and potential interfering species were investigated. For 120 s preconcentration time, the proposed system handles about 25 samples h-1 (50.0 500 ng l-1), consuming about 10 ml sample and 5 mg SnCl2 per determination. The detection limit is 0.8 ng l-1 and the relative standard deviation (RSD) (n = 12) of a 76.7 ng l-1 sample is about 5%. Results are in agreement with certified value of standard materials at 95% confidence level and good recoveries (97-128%) of spiked samples were found. (C) 2000 Elsevier Science B.V.

Densification and residual stresses induced in glass surfaces by Vickers indentations

Images and profiles of Vickers impressions produced on as-received float-glass were obtained using atomic force microscopy (AFM). The images show that the impression edges undergo elastic recovery parallel to surface. The profiles made it possible to measure vertical elastic recovery, ev(r). For a 40 g nominal load, maximum penetration depth of indenter was (2.20 ± 0.03) μm, and recovery at the impression center was ev(0) = (0.98 ± 0.03) μm. Vertical elastic recovery was non-uniform along profiles. Permanent impressions produced resulted from glass mass displacement downward, producing an increase in glass density in impression vicinity, which is discussed in terms of changes in O-Si-O and Si-O-Si bond angles and Si-O bond length. Near impression edges, pileup was observed for which a simplified model is proposed taking into account the compaction and stresses near the impressions. © 2000 Elsevier Science B.V. All rights reserved.

Effect of in concentration in the starting solution on the structural and electrical properties of ZnO films prepared by the pyrosol process at 450°C

Undoped and indium-doped Zinc oxide (ZnO) solid films were deposited by the pyrosol process at 450°C on glass substrates from solutions where In/Zn ratio was 2, 5, and 10 at.%. Electrical measurements performed at room temperature show that the addition of indium changes the resistance of the films. The resistivities of doped films are less than non-doped ZnO films by one to two orders of magnitude depending on the dopant concentration in the solution. Preferential orientation of the films with the c-axis perpendicular to the substrate was detected by X-ray diffraction and polarized extended X-ray absorption fine structures measurements at the Zn K edge. This orientation depends on the indium concentration in the starting solution. The most textured films were obtained for solutions where In/Zn ratio was 2 and 5 at.%. When In/Zn = 10 at.%, the films had a nearly random orientation of crystallites. Evidence of the incorporation of indium in the ZnO lattice was obtained from extended X-ray absorption fine structures at the In and Zn K edges. The structural analysis of the least resistive film (Zn/In = 5 at.%) shows that In substitutes Zn in the wurtzite structure. © 2000 Elsevier Science B.V. All rights reserved.

Surface amorphization in diamond turning of silicon crystal investigated by transmission electron microscopy

Silicon crystal exhibits a ductile regime during machining prior to the onset of fracture when appropriate cutting conditions are applied. The present study shows that the ductile regime is a result of a phase transformation which is indirectly evidenced by the amorphous phase detected in the machined surface. Transmission electron microscopy (TEM) planar view studies were successfully performed on monocrystalline silicon (1 0 0) single point diamond turned. TEM electron diffraction patterns show that the machined surface presents diffuse rings along with traces of crystalline material. This is attributed to crystalline silicon immersed in an amorphous matrix. Furthermore, only diffuse rings in the diffraction patterns of the ductile chip are detected, indicating that it is totally amorphous. © 2000 Elsevier Science B.V. All rights reserved.

Avaliação de seis variedades de uvas sem sementes no Submédio São Francisco

This work aimed to study aspects related to vegetative and productive development of plants and characteristics and chemical components of bunches of six seedless grape varieties at environmental conditions of São Francisco river's valley, Northeastern Brazil. The experiment was carried out during 1997 and 1998. The varieties tested were grafted on IAC 572 ('Jales') rootstock. The experimental model utilized was totally randomized, and with parcels subdivided into different production cycles. The results showed significative differences among varieties at different pruning times. The average weight of bunches varied from 164.8 g for 'Marroo Seedless' and 203.5 g for 'Beauty Seedless'. The average diameter of berries was superior to 15.7 mm for all of the varieties. The total soluble solids varied from 14.05°Brix in 'Canner' to 19.6°Brix in 'Venus'. The total titratable acidity (ATT) was lower than 0.91 g tartaric acid/100 mL of juice. The ratio SST/ATT varied from 19.05 in 'Beauty Seedless' to 28.57 in 'Vênus'. 'Vênus' and 'Marroo Seedless' were the most productive varieties, with the average annual production of 24 ton/ha and 20 ton/ha, respectively.

Encapsulação da rifampicina em matrizes poliméricas flutuantes obtidas por liofilização a partir de metilcelulose e ftalato de hidroxipropilmetilcelulose. Avaliação da liberação in vitro

Floating multiparticles for oral administration with different compositions were studied from a matricial polymeric system to obtain sustained release. The polymers used in the multiparticles constitution were methylceullose (MC) and hydroxypropylmethylcelullose phthalate (HPMCP) in several proportions. Spherical and isolated structures were obtained using HPMCP/MC in the range from 1:3 to 1: 13. The diameters of the floating multiparticles were in the range from 3 to 3.25 mm, while the non-floating particles were between 1.75 and 2.1 mm. The morphological analysis by confocal microscopy showed that the probable mechanism of drug release was the diffusion from the inner of particles to external media. The encapsulation of hydrophilic model substances (tartrazin and bordeaux S), showed that the maximum incorporation was about 38%, while for the lipophilic model substances (rifampicin) was 45%. The in vitro release of rifampicin in acid medium was dependent on the ratio HPMCP/MC. In alkaline medium the release followed a two-step profile, with slow release in the initial times and subsequent increase in the higher times The initial drug delivery profile was not dependent on the MC/HPMCP ratio and can be related with the release of the antibiotic from multiparticle inner caused by the swelling of polymers by the presence of water in the system. However, afterwards the release proceeds with typical profile of process involving hydrogels systems.