Re : Why optometry must work from urban and regional Aboriginal health services

We are writing to support the recent Viewpoint written by Anjou, Boudville and Taylor ‘Why optometry must work in Aboriginal Health Services in urban and regional Australia’.[1] We are a group of optometrists who provide optometric services within Aboriginal Health Services in urban and regional settings and we agree that access to optometry in Aboriginal Health Services should be supported and expanded in an effort to ‘close the gap’ for vision.

The Royal Commission into the NSW Police Service : process corruption and the limits of judicial reflexivity

This paper will offer an examination of the Reports of the Royal Commission into the NSW Police Service (Interim Report February 1996; Interim Report: Immediate Measures November 1996; Final Report Vol I: Corruption; Final Report Vol II: Reform; Final Report Vol III: Appendices May 1997) excluding the Report on Paedophilia, August 1997. The examination will be confined essentially to one question: to what extent do the published Reports consider the part played by the judiciary, prosecutors and lawyers, in the construction of a form of criminal justice revealed by the Commission itself, to be disfigured by serious process corruption? The examination will be conducted by way of a chronological trawl through the Reports of the Commission in an attempt to identify all references to the role of the judiciary, prosecutors and lawyers. The adequacy of any such treatment will then be considered. In order to set the scene a brief and generalised overview of the Wood Commission will be offered together with the Commission's definition of process corruption.

Quantitative data collection and study validity

The quality of data collection methods selected and the integrity of the data collected are integral tot eh success of a study. This chapter focuses on data collection and study validity. After reading the chapter, readers should be able to define types of data collection methods in quantitative research; list advantages and disadvantages of each method; discuss factors related to internal and external validity; critically evaluate data collection methods and discuss the need to operationalise variables of interest for data collection.

Royal Commissions and Criminal Justice : Behind the Ideal

Royal commissions are approached not as exercises in legitimation and closure but as sites of struggle that are heavily traversed by power holders yet are open to the voices of alternative and unofficial social groups, social movements, and individuals. Three case studies are discussed that highlight the hegemony of the legal methodology and discourse that dominate many inquiries. The first case, involving a single-case miscarriage inquiry, involves a man who was accused, convicted, and served a prison sentence for the murder of his wife. Nineteen years following the murder another man confessed to the crime. The official inquiry found that nothing had gone wrong in the criminal justice process; it had operated as it should. Thus, in the face of evidence that the criminal justice process may be flawed, the discursive strategy became one of silence; no explanation was offered except for the declaration that nothing had gone wrong. The fallibility of the criminal justice system was thus hidden from public view. The second case study examines the Wood Royal Commission into corruption charges within the NSW Police Service. The royal commission revealed a bevy of police misconduct offenses including process corruption, improper associations, theft, and substance abuse, among others. The author discusses the ways in which the other criminal justice players, the judiciary and prosecuting attorneys, emerge only briefly as potential ethical agents in relation to police misconduct and corruption and then abruptly disappear again. Yet, these other players are absolved of any responsibility for police misconduct. The third case study involves a spin-off inquiry into the facts surrounding the Leigh Leigh rape and murder case. This case illustrates how official inquires can seek to exclude non-traditional viewpoints and methodologies; in this case, the views of a feminist criminologist. The third case also illustrates how the adversarial process within the legal system allows those with power to subjugate the viewpoints of others through the legitimate use of cross-examination. These three case studies reveal how official inquiries tend to speak from an “idealized conception of justice” and downplay any viewpoint that questions this idealized version of the truth.

Vision-based docking using an autonomous surface vehicle

This paper describes the development of a novel vision-based autonomous surface vehicle with the purpose of performing coordinated docking manoeuvres with a target, such as an autonomous underwater vehicle, at the water's surface. The system architecture integrates two small processor units; the first performs vehicle control and implements a virtual force based docking strategy, with the second performing vision-based target segmentation and tracking. Furthermore, the architecture utilises wireless sensor network technology allowing the vehicle to be observed by, and even integrated within an ad-hoc sensor network. Simulated and experimental results are presented demonstrating the autonomous vision- based docking strategy on a proof-of-concept vehicle.

Accused headmaster turned me into pedophile, says convicted cleric Peter Gilbert

A CLERGYMAN who allegedly raped boys at a north Queensland boarding school in the 1960s has claimed he was ordered to take female hormones by his headmaster, who encouraged the "romantic love" of children among staff. Former Anglican brother Peter Gilbert - sentenced to seven years' jail in 2006 for the rape and indecent assault of children in the 1980s in South Australia - has blamed St Barnabas headmaster the late Robert Waddington for turning him into a pedophile. In a statement to one of his alleged victims, Gilbert said Waddington was molesting children himself and the Anglican priest would absolve the young teacher of his abuse of children in the confessional. The account has emerged as the top ranks of the Anglican church in Australia and Britain have been rocked by allegations of the covering-up of complaints made in 1999 and 2003 about Waddington's abuse while headmaster at the boarding school in Ravenshoe, north Queensland, and later, when he was dean of Manchester. A full investigation is being demanded into the handling of the complaints by the former Archbishop of York, now Lord (David) Hope of Thornes, and Australian church officials, including the former bishop of north Queensland, Clyde Wood.

A comparison between bagasse and water efficient alternatives using KOH/AQ pulping

Numerous crops grow in sugar regions that have the potential to increase the amount of biomass available to a small bagasse-based pulp factory. Arundo donax and Sorghum offer unique advantages to farmers compared to other agricultural crops. Sorghum bicolour requires only 1/3 of the water of sugarcane. Arundo donax is a very high yield crop, it can also grow with little water but it has the further advantage in that it is also highly stress tolerant, making it suitable for land which is unsuited to other crops. Pulps produced from these crops were benchmarked against sugarcane bagasse pulp. Arundo, sorghum and bagasse were pulped using KOH and anthraquinone to 20 Kappa number so as to produce a bleachable pulp which is suitable for making photocopier paper and tissue products. The unbleached sorghum pulp has better tensile strength properties than the unbleached Arundo pulp (43.8 Nm/g compared to 21.4 Nm/g) and the bleached sorghum pulp tensile strength was similar to bagasse (28.4 Nm/g). At 20 Kappa number, sorghum pulp had acceptable yield for a non-wood fibre (45% c.f. 55% for bagasse), Arundo donax pulp had low tensile strength, and relatively low yield (38.7%), even for an agricultural fibre and required severe cooking conditions to achieve similar delignification to sugarcane bagasse or sorghum. Sorghum and Arundo donax produced thicker handsheets than bagasse (>160 µm c.f. 122 µm for bagasse). In preliminary experiments sorghum and bagasse responded slightly better to Totally Chlorine Free peroxide bleaching (QPP), although none achieved a satisfactory brightness level and further improvement would be required to produce a bleached pulp.

Numerical investigation of the influence of topography on simulated downburst wind fields

A, dry, non-hydrostatic sub-cloud model is used to simulate an isolated stationary downburst wind event to study the influence topographic features have on the near-ground wind structure of these storms. It was generally found that storm maximum wind speeds could be increased by up to 30% because of the presence of a topographic feature at the location of maximum wind speeds. Comparing predicted velocity profile amplification with that of a steady flow impinging jet, similar results were found despite the simplifications made in the impinging jet model. Comparison of these amplification profiles with those found in the simulated boundary layer winds reveal reductions of up to 30% in the downburst cases. Downburst and boundary layer amplification profiles were shown to become more similar as the topographic feature height was reduced with respect to the outflow depth.

Influence of tilt and surface roughness on the outflow wind field of an impinging jet

A physical and numerical steady flow impinging jet has been used to simulate the bulk characteristics of a downburst-like wind field. The influence of downdraft tilt and surface roughness on the ensuing wall jet flow has been investigated. It was found that a simulated downdraft impinging the surface at a non-normal angle has the potential for causing larger structural loads than the normal impingement case. It was also found that for the current impinging jet simulations, surface roughness played a minor role in determining the storm maximum wind structure, but this influence increased as the wall jet diverged. However, through comparison with previous research it was found that the influence of surface roughness is Reynolds number dependent and therefore may differ from that reported herein for full-scale downburst cases. Using the current experimental results an empirical model has been developed for laboratory-scale impinging jet velocity structure that includes the influence of both jet tilt and surface roughness.

Numerical simulation of downburst winds

The wind field of an intense idealised downburst wind storm has been studied using an axisymmetric, dry, non-hydrostatic numerical sub-cloud model. The downburst driving processes of evaporation and melting have been paramaterized by an imposed cooling source that triggers and sustains a downdraft. The simulated downburst exhibits many characteristics of observed full-scale downburst events, in particular the presence of a primary and counter rotating secondary ring vortex at the leading edge of the diverging front. The counter-rotating vortex is shown to significantly influence the development and structure of the outflow. Numerical forcing and environmental characteristics have been systematically varied to determine the influence on the outflow wind field. Normalised wind structure at the time of peak outflow intensity was generally shown to remain constant for all simulations. Enveloped velocity profiles considering the velocity structure throughout the entire storm event show much more scatter. Assessing the available kinetic energy within each simulated storm event, it is shown that the simulated downburst wind events had significantly less energy available for loading isolated structures when compared with atmospheric boundary layer winds. The discrepancy is shown to be particularly prevalent when wind speeds were integrated over heights representative of tall buildings. A similar analysis for available full scale measurements led to similar findings.

Impinging jet simulation of stationary downburst flow over topography

A non-translating, long duration thunderstorm downburst has been simulated experimentally and numerically by modelling a spatially stationary steady flow impinging air jet. Velocity profiles were shown to compare well with an upper-bound of velocity measurements reported for full-scale microbursts. Velocity speed-up over a range of topographic features in simulated downburst flow was also tested with comparisons made to previous work in a similar flow, and also boundary layer wind tunnel experiments. It was found that the amplification measured above the crest of topographic features in simulated downburst flow was up to 35% less than that observed in boundary layer flow for all shapes tested. From the computational standpoint we conclude that the Shear Stress Transport (SST) model performs the best from amongst a range of eddy-viscosity and second moment closures tested for modelling the impinging jet flow.

Numerical simulation of idealised three-dimensional downburst wind fields

Convective downburst wind storms generate the peak annual gust wind speed for many parts of the non-cyclonic world at return periods of importance for ultimate limit state design. Despite this there is little clear understanding of how to appropriately design for these wind events given their significant dissimilarities to boundary layer winds upon which most design is based. To enhance the understanding of wind fields associated with these storms a three-dimensional numerical model was developed to simulate a multitude of idealised downburst scenarios and to investigate their near-ground wind characteristics. Stationary and translating downdraft wind events in still and sheared environments were simulated with baseline results showing good agreement with previous numerical work and full-scale observational data. Significant differences are shown in the normalised peak wind speed velocity profiles depending on the environmental wind conditions in the vicinity of the simulated event. When integrated over the height of mid- to high rise structures, all simulated profiles are shown to produce wind loads smaller than an equivalent 10 m height matched open terrain boundary layer profile. This suggests that for these structures the current design approach is conservative from an ultimate loading standpoint. Investigating the influence of topography on the structure of the simulated near-ground downburst wind fields, it is shown that these features amplify wind speeds in a manner similar to that expected for boundary layer winds, but the extent of amplification is reduced. The level of reduction is shown to be dependent on the depth of the simulated downburst outflow.

Baidu’s perfect paradox : free speech and the right to censor

China’s biggest search engine has a constitutional right to filter its search results, a US court found last month. But that’s just the start of the story. Eight New York-based pro-democracy activists sued Baidu Inc in 2011, seeking damages because Baidu prevents their work from showing up in search results. Baidu follows Chinese law that requires it to censor politically sensitive results. But in what the plaintiffs’ lawyer has dubbed a “perfect paradox”, US District Judge Jesse Furman has dismissed the challenge, explaining that to hold Baidu liable for its decisions to censor pro-democracy content would itself infringe the right to free speech.

Actinidia DRM1 : an intrinsically disordered protein whose mRNA expression is inversely correlated with spring budbreak in Kiwifruit

Intrinsically disordered proteins (IDPs) are a relatively recently defined class of proteins which, under native conditions, lack a unique tertiary structure whilst maintaining essential biological functions. Functional classification of IDPs have implicated such proteins as being involved in various physiological processes including transcription and translation regulation, signal transduction and protein modification. Actinidia DRM1 (Ade DORMANCY ASSOCIATED GENE 1), represents a robust dormancy marker whose mRNA transcript expression exhibits a strong inverse correlation with the onset of growth following periods of physiological dormancy. Bioinformatic analyses suggest that DRM1 is plant specific and highly conserved at both the nucleotide and protein levels. It is predicted to be an intrinsically disordered protein with two distinct highly conserved domains. Several Actinidia DRM1 homologues, which align into two distinct Actinidia-specific families, Type I and Type II, have been identified. No candidates for the Arabidopsis DRM1-Homologue (AtDRM2) an additional family member, has been identified in Actinidia.

Electrical imaging and fluid modeling of convective fingering in a shallow water-table aquifer

Unstable density-driven flow can lead to enhanced solute transport in groundwater. Only recently has the complex fingering pattern associated with free convection been documented in field settings. Electrical resistivity (ER) tomography has been used to capture a snapshot of convective instabilities at a single point in time, but a thorough transient analysis is still lacking in the literature. We present the results of a 2 year experimental study at a shallow aquifer in the United Arab Emirates that was designed to specifically explore the transient nature of free convection. ER tomography data documented the presence of convective fingers following a significant rainfall event. We demonstrate that the complex fingering pattern had completely disappeared a year after the rainfall event. The observation is supported by an analysis of the aquifer halite budget and hydrodynamic modeling of the transient character of the fingering instabilities. Modeling results show that the transient dynamics of the gravitational instabilities (their initial development, infiltration into the underlying lower-density groundwater, and subsequent decay) are in agreement with the timing observed in the time-lapse ER measurements. All experimental observations and modeling results are consistent with the hypothesis that a dense brine that infiltrated into the aquifer from a surficial source was the cause of free convection at this site, and that the finite nature of the dense brine source and dispersive mixing led to the decay of instabilities with time. This study highlights the importance of the transience of free convection phenomena and suggests that these processes are more rapid than was previously understood.