990 resultados para WESTERN SWEDEN
Resumo:
The Central Atlantic Magmatic Province (CAMP), emplaced at the Triassic-Jurassic (T-J) boundary (-200 Ma), is among the largest igneous provinces on Earth. The Maranhao basin in NE Brazil is located around 700 km inland and 2000 km from the site of the earliest Pangea disruption. The CAMP tholeiites occur only in the western part of the basin and have been described as low and high-Ti. Here we document the occurrence of two sub-groups among the high-Ti tholeiites in the Western Maranhao basin. The major and trace elements and the Sr-Nd-Pb isotopic ratios define three chemical groups corresponding to the low-Ti (TiO(2)< 1.3 wt.%), high-Ti (TiO(2)-2.0 wt.%) and evolved high-Ti (TiO(2 >)3 wt.%) western Maranhao basin tholeiites (WMBT). The new (40)Ar/(39)Ar plateau ages obtained on plagioclase separates for high-Ti (199.7 +/- 2.4 Ma) and evolved high-Ti WMBT (197.2 +/- 0.5 Ma and 198.2 +/- 0.6 Ma) are indistinguishable and identical to those of previously analyzed low-Ti WMBT (198.5 +/- 0.8 Ma) and to the mean (40)Ar/(39)Ar age of the CAMP (199 +/- 2.4 Ma). We also present the first Re-Os isotopic data for CAMP basalts. The low and high-Ti samples display mantle-like initial ((187)Os/(188)Os)(i) ranging from 0.1267 to 0.1299, while the evolved high-Ti samples are more radiogenic (((187)Os/ (188)Os)(i) up to 0.184) We propose that the high-Ti WMBT were derived from the sub-lithospheric asthenosphere, and contaminated during ascent by interaction with the subcontinental lithospheric mantle (SCLM). The evolved high-Ti WMBT were derived from the same asthenospheric source but experienced crustal contamination. The chemical characteristics of the low-Ti group can be explained by partial melting of the most fertile portions of the SCLM metasomatized during paleo-subduction. Alternatively, the low-Ti WMBT could be derived from the sub-lithospheric asthenosphere but the resulting melts may have undergone contamination by the SCLM. The occurrences of high-Ti basalts are apparently not restricted to the area of initial continental disruption which may bring into question previous interpretations such as those relating high-Ti CAMP magmatism to the initiation of Atlantic ridge spreading or as the expression of a deep mantle plume. We propose that the CAMP magmatism in the Maranhao basin may be attributed to local hotter mantle conditions due to the combined effects of edge-driven convection and large-scale mantle warming under the Pangea supercontinent. The involvement of a mantle-plume with asthenosphere-like isotopic characteristics cannot be ruled out either as one of the main source components of the WMBT or as a heat supplier. (C) 2010 Elsevier BM. All rights reserved.
Resumo:
Laurencia marilzae Gil-Rodriguez, Senties & MT Fujii is recorded for the first time for the tropical western Atlantic Ocean, occurring in Isla Mujeres, Quintana Roo, Mexican Caribbean. The specimens were collected in November 2008 and June 2009, growing epilithically in the lower intertidal zone on moderately exposed rocky shores. This species is characterized by its distinctive yellow-orange color in the natural environment, four pericentral cells per vegetative axial segment, the presence of secondary pit-connections between adjacent cortical cells, which are markedly projecting at the apices, and by the presence of one ""corp en cerise"" per cell in all cells of the thallus: cortical, medullary, including pericentral and axial cells, and trichoblasts. Morphological similarities and molecular data support the determination of this material as L. marilzae. The present study expands the geographical distribution of L. marilzae to the Caribbean Sea in the tropical Western Atlantic Ocean.
Resumo:
P>Nongeniculate Corallinaceae are poorly known in Brazil. In our endeavor to identify this group of seaweeds along the Brazilian coast we came across some specimens that fit well into the accepted circumscription of Litothamnion Heydrich. Within this genus they could be identified to what has been called L. superpositum Foslie. The specimens were represented by nongeniculate, free living specimens (rhodoliths); lumpy to fruticose growth-form, presenting flared epithallial cells in transversal section; multiporate tetrasporangial conceptacles, with roof protruding above or flush with the surrounding thallus surface; chambers 250-525 mu m in diameter and 150-230 mu m high, roof structured by filaments with 3-5 cells long; and pores in depression. Among the species described from the Brazilian coast, L. heteromorphum (Foslie) Foslie presented anatomical and reproductive characteristics similar to the referred species described from southern Africa and Australia. Therefore, we propose to consider L. heteromorphum as a heterotypic synonym of L. superpositum and extending its distribution to the Western Atlantic.
Resumo:
Morphological and molecular studies were carried out on Palisada papillosa and P. perforata from the Canary Islands (type locality of P. perforata), Mexico and Brazil. The two species have been distinguished by features of their external morphology such as size and degree of compactness of the thalli, presence or absence of arcuate branches, branching pattern and basal system. A detailed morphological comparison between these taxa showed that none of the vegetative anatomical or reproductive characters was sufficient to separate these species. The presence or absence of cortical cells in a palisade-like arrangement, also previously used to. distinguish these species, is not applicable. The species present all characters typical of the genus, and both share production of the first pericentral cell underneath the basal cell of the trichoblast, production of two fertile pericentral cells (the second and the third additional, the first remaining sterile), spermatangial branches produced from one of two laterals on the suprabasal cell of trichoblasts, and the procarpbearing segment with four pericentral cells. Details of the procarp are described for the species for the first time. The phylogenetic position of these species was inferred by analysis of the chloroplast-encoded rbcL gene sequences from 39 taxa, using one other Rhodomelacean taxon and two Ceramiaceae as outgroups. Relationships within the clade formed by P. papillosa and P. perforata have not been resolved due to the low level of genetic variation in their rbcL sequences (0-0.4%). Considering this and the morphological similarities, we conclude that P. papillosa is a taxonomic synonym of P. perforata. The phylogenetic analyses also supported the nomenclatural transfer of two species of Chondrophycus to Palisada, namely, P. patentiramea (Montagne) Cassano, Senties, Gil-Rodriguez & M.T. Fujii comb. nov. and P. thuyoides (Kutzing) Cassano, Senties, Gil-Rodriguez & M.T. Fujii comb. nov.
Resumo:
The identification of the lebranche mullet in the western south Atlantic has long been problematical. In most recent works either Mugil liza Valenciennes and M. platanus Gunther, 1880 or M. liza and M. cephalus Linnaeus, 1758 were recognized from the region and more rarely the occurrence of only one species has been proposed but without sufficient morphological, biochemical or molecular data to allow the designation of the taxonomically appropriate name. Analysis of meristic and morphometric data taken from samples collected from Venezuela to Argentina, clearly indicates that there is only one species of lebranche mullet in the Caribbean Sea region and the Atlantic coast of South America and that Mugil liza is the appropriate name. The comparison of the combined data from all the samples of M. liza with the data taken from one sample of M. cephalus that originated in the Mediterranean, the possible locality from which type specimens were collected (Eschmeyer and Fricke, 2009), revealed significant differences indicating that they are different species. It is also suggested that individuals from the western north Atlantic identified as M. cephalus might represent a population of M. liza in this region.
Resumo:
The Global Initiative Against Asthma (GINA) was developed to meet the global challenge of asthma. GINA has been adopted in most countries and comparison of asthma management in different parts of the world may be of help when assessing the global dissemination of the guideline. The overall goals in GINA include that asthma patients should be free of symptoms, acute asthma attacks and activity limitations. The aim of the present study was to compare asthma management and asthma control in Sao Paulo, Brazil and Uppsala, Sweden. Information was collected from asthmatics in Sao Paulo and Uppsala with a questionnaire. The questionnaire dealt with the following issues: symptoms, smoking, self-management, hospital visits, effect on school/work and medication. The Sao Paulo patients were more likely to have uncontrolled asthma (36% vs 13%, P < 0.001), having made emergency room visits (57% vs 29%, P < 0.001) and having lost days at school or work because of their asthma (46% vs 28%, P = 0.03) than the asthmatics from Uppsala. There were no difference in the use of inhaled corticosteroids, but the Brazilian patients were more likely to be using theophylline (18% vs 1%, P = 0.001) and less likely to be using long-acting beta-2 agonists (18% vs 37%, P < 0.001). We conclude that the level of asthma control was lower among the patients from Sao Paulo than Uppsala. Few of the patients in either city reached the goals set up by GINA. Improved asthma management may therefore lead to health-economic benefits in both locations. Please cite this paper as: Skorup P, Rizzo LV, Machado-Boman L and Janson C. Asthma management and asthma control in Sao Paulo, Brazil and Uppsala, Sweden: a questionnaire-based comparison. The Clinical Respiratory Journal 2009; 3: 22-28.
Resumo:
A total of 72 Trypanosoma cruzi isolates from different hosts and geographical regions of western Venezuela, where Chagas disease is endemic, were typed using ribosomal and mini-exon gene markers. The isolates were obtained from wild, peridomestic and domestic sources including triatomine-bugs, human acute chagasic patients and other mammals. Results showed that T. cruzi two major phylogenetic lineages, T. cruzi I and T. cruzi II were present. However, a remarkable predominance of T. cruzi I (96%) over T. cruzi II (4%) was observed. The present results suggest that in western Venezuela circulation of both T. cruzi I and T. cruzi II isolates is independent from the source of isolation and the geographical area where they occur, with predominance of T. cruzi I. The epidemiological significance of the present results is discussed.
Resumo:
The Mantiqueira Province represents a series of supracrustal segments of the South-American counterpart formed during the Gondwana Supercontinent agglutination. In this crustal domain, the process of escape tectonics played a conspicuous role, generating important NE-N-S-trending lineaments. The oblique component of the motions of the colliding tectonic blocks defined the transpressional character of the main suture zones: Lancinha-Itariri, Cubato-Arcadia-Areal, Serrinha-Rio Palmital in the Ribeira Belt and Sierra Ballena-Major Gercino in the Dom Feliciano Belt. The process as a whole lasted for ca. 60 Ma, since the initial collision phase until the lateral escape phase predominantly marked by dextral and subordinate sinistral transpressional shear zones. In the Dom Feliciano Belt, southern Brazil and Uruguay, transpressional event at 630-600 Ma is recognized and in the Ribeira Belt, despite less coevally, the transpressional event occurred between 590 and 560 Ma in its northern-central portion and between ca. 625 and 595 Ma in its central-southern portion. The kinematics of several shear zones with simultaneous movement in opposite directions at their terminations is explained by the sinuosity of these lineaments in relation to a predominantly continuous westward compression.
Resumo:
The studied sector of the central Ribeira Fold Belt (SE Brazil) comprises metatexites, diatexites, charnockites and blastomylonites. This study integrates petrological and thermochronological data in order to constrain the thermotectonic and geodynamic evolution of this Neoproterozoic-Ordovician mobile belt during Western Gondwana amalgamation. New data indicate that after an earlier collision stage at similar to 610 Ma (zircon, U-Pb age), peak metamorphism and lower crust partial melting, coeval with the main regional high grade D(1) thrust deformation, occurred at 572-562 Ma (zircon, U-Pb ages). The overall average cooling rate was low (<5 degrees C/Ma) from 750 to 250 degrees C (at similar to 455 Ma; biotite-WR Rb-Sr age), but disparate cooling paths indicate differential uplift between distinct lithotypes: (a) metatexites and blastomylonites show a overall stable 3-5 degrees C/Ma cooling rate; (b) charnockites and associated rocks remained at T>650 degrees C during sub-horizontal D(2) shearing until similar to 510-470 Ma (garnet-WR Sm-Nd ages) (1-2 degrees C/Ma), being then rapidly exhumed/cooled (8-30 degrees C/Ma) during post-orogenic D(3) deformation with late granite emplacement at similar to 490 Ma (zircon, U-Pb age). Cooling rates based on garnet-biotite Fe-Mg diffusion are broadly consistent with the geochronological cooling rates: (a) metatexites were cooled faster at high temperatures (6 degrees C/Ma) and slowly at low temperatures (0.1 degrees C/Ma), decreasing cooling rates with time; (b) charnockites show low cooling rates (2 degrees C/Ma) near metamorphic peak conditions and high cooling rates (120 degrees C/Ma) at lower temperatures, increasing cooling rates during retrogression. The charnockite thermal evolution and the extensive production of granitoid melts in the area imply that high geothermal gradients were sustained fora long period of time (50-90 Ma). This thermal anomaly most likely reflects upwelling of asthenospheric mantle and magma underplating coupled with long-term generation of high HPE (heat producing elements) granitoids. These factors must have sustained elevated crustal geotherms for similar to 100 Ma, promoting widespread charnockite generation at middle to lower crustal levels. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
The basement in the `Altiplano` high plateau of the Andes of northern Chile mostly consists of late Paleozoic to Early Triassic felsic igneous rocks (Collahuasi Group) that were emplaced and extruded along the western margin of the Gondwana supercontinent. This igneous Suite crops out in the Collalluasi area and forms the backbone of most of the high Andes from latitude 20 degrees to 22 degrees S. Rocks of the Collahuasi Group and correlative formations form art extensive belt of volcanic and subvolcanic rocks throughout the main Andes of Chile, the Frontal Cordillera of Argentina (Choiyoi Group or Choiyoi Granite-Rhyolite Province), and the Eastern Cordillera of Peru. Thirteen new SHRIMP U-Pb zircon ages from the Collahuasi area document a bimodal timing for magnatism, with a dominant peak at about 300 Ma and a less significant one at 244 Ma. Copper-Mo porphyry mineralization is related to the younger igneous event. Initial Hf isotopic ratios for the similar to 300 Ma zircons range from about -2 to +6 indicating that the magmas incorporated components with a significant crustal residence time. The 244 Ma magmas were derived from a less enriched source, with the initial HT values ranging from +2 to +6, suggestive of a mixture with a more depleted component. Limited whole rock (144)Nd/(143)Nd and (87)Sr/(86)Sr isotopic ratios further support the likelihood that the Collahuasi Group magmatism incorporated significant older crustal components, or at least a mixture of crustal sources with more and less evolved isotopic signatures. (C) 2007 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved.
Resumo:
Detta examensarbete innefattar både en fördjupning och en praktisk del inom ämnet grafisk profilering och visuellt identitetsskapande. Den praktiska delen av examensarbetet har utförts parallellt med reklambyrån Cabesa Communication Sweden AB, Stockholm. Fördjupningsdelen behandlar områden som branding, företagsidentitet och grafisk profil. För att skapa ett starkt varumärke på en marknad krävs välplanerade, strategiska och originella reklamkampanjer samt en stark och enhetlig visuell identitet. Med hjälp av fördjupningen så har en kunskapsgrund lagts inom ämnet grafisk profilering och det praktiska arbetet har förenklats mycket.Den praktiska delen innehåller framtagning av en grafisk profil med tillhörande manual till House of Sweden, Sveriges nya ambassad, Event Center och lägenhetsbyggnad i Washington D.C., USA. Genom en kvalitativ och enhetlig grafisk profil ska House of Sweden kunna bli ett starkt och välkänt varumärke. Den grafiska profilen bygger på ett antal huvuddelar; logotyp, typsnitt, färger och bildspråk. Utifrån dessa delar har bland annat korrespondensprogram, annonser och profilartiklar tagits fram, allt sammanställt i en omfattandegrafisk manual.
Resumo:
This paper examines the wage premium to computer use in Sweden in the early 1990’s. I use simple regression model and interaction terms in my paper to examine the effect of computer use at work. Although the data is only one-year cross-section data, my results clearly show a wage premium to computer use in Sweden. There are also interesting findings in my paper by using Swedish data. From the results, I find wage premium to be related to intensity of computer use at work.
Resumo:
An overview of the theoretical literature for the last two decades suggests that there is no clear-cut relationship one can pin down between exchange rate volatility and trade flows. Analytical results are based on specific assumptions and only hold in certain cases. Especially, the impact of exchange rate volatility on export and import activity investigated separately leads also to dissimilar conclusions among countries studied. The general presumption is that an increase in exchange rate volatility will have an adverse effect on trade flows and consequently, the overall heath of the world economy. However, neither theoretical models nor empirical studies provide us with a definitive answer, leaving obtained results highly ambiguous and inconsistent (Baum and Caglayan, 2006). We purposed to empirically investigate trade effects of exchange rate fluctuations in Sweden from the perspective of export and import in this research. The data comprises period from January 1993 to December 2006, where export and import volumes are considered from the point of their determinants, including exchange rate volatility, which has been measured through EGARCH model. The results for the case of Sweden show that short run dynamics of volatility negatively associated with both export and import, whereas considered from the case of previous period volatility it exhibits positive relationship. These results are consistent with the most findings of prior studies, where the relationship remained ambiguous.
Resumo:
This study deals with immigrants’ political participation in Sweden and the Netherlands. Scholars have recognized low level of political participation of immigrants in Sweden compared to the Netherlands. The main goal of this study is to analyze the institutional influence, mainly from political parties over immigrants’ motivation for active electoral participation. The modified actor-context model uses here as the main theoretical framework. In addition, social capital theory employs to analyze immigrants’ voluntary organizational membership. This study confirms that, Swedish immigrants have the lower participation rate in the political sphere, at lest to a certain extent, than its counterparts the Dutch immigrants. This study also confirms the argument that contextual factors can influence actor’s motivations in integration-oriented action, and similarly it validates the necessity of enlargement of the actor-context model.
Resumo:
The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.