Intake of isoflavone-supplemented soy yogurt fermented with Enterococcus faecium lowers serum total cholesterol and non-HDL cholesterol of hypercholesterolemic rats

The aim of this study was to obtain an isoflavone-supplemented soy yogurt, fermented with Enterococcus faecium CRL 183 and Lactobacillus helveticus ssp jugurti, with suitable sensory properties and to assess the effects of the final product on blood lipids in hypercholesterolemic rats. Four isoflavone supplementation procedures were tested, in which the isoflavone was added at these stages: (1) before heat-treatment; (2) after heating and before fermentation; (3) after fermentation and (4) in the okara (by-product of soy milk) flour stirred into the fermented product when consumed. The products were subjected to a test of sensory acceptability. To assess their potential hypocholesterolemic properties in vivo, four groups of rats were used: control (C), hypercholesterolemic (H), hypercholesterolemic plus fermented product (HF) and hypercholesterolemic plus isoflavone-supplemented fermented product (HFI). Hypercholesterolemia was induced in rats of groups H, HF and HFI by feeding them on a commercial rat chow to which cholesterol and cholic acid had been added. Total, HDL and non-HDL cholesterol and triglycerides were measured in the blood of the rats. No significant sensorial differences were detected among the samples of soy yogurt supplemented with isoflavones at various processing stages. Rats fed a fermented soy product enriched with isoflavones (HFI group) had significantly (P < 0.05) less serum total cholesterol (15.5%) compared with rats fed a hypercholesterolemic diet (H group). Non-HDL cholesterol was less (P < 0.05) in rats fed a fermented soy product enriched or not with isoflavones (27.4 and 23.2%) compared to H group. The HDL-C and triglyceride concentrations did not differ significantly among the groups. It was possible to obtain an isoflavone-supplemented soy yogurt with satisfactory sensory characteristics. The resulting supplemented soy yogurt was capable of producing a lipid-lowering effect in hypercholesterolemic rats, relative to the animals that did not consume this product.

Aspectos sensoriais e físico-químicos de “iogurtes” de soja com espessantes/estabilizantes a base de fécula de inhame (Dioscorea alata), amido modificado e gelatina

This study had as objective to evaluate the effect of yam starch, modified starch from Cargill-Brasil (Amidomax 4800 (R)) and gelatin from Gelita-Brasil (GEL-LAC) as stabilizers/thickeners in different ratios and combinations in the soy yoghurt fermented with Enterococcus faecium and Lactobacillus helveticus ssp jugurti. Ten soy yoghurt formulations containing these different stabilizers/thickeners, always totalizing 0.5% in relation to the final formulation, were analyzed in sensorial and physical-chemical terms. Based on the observed results, it was concluded in relation to the sensorial point of view that the more appropriate product was processed only with gelatin at 0.5% concentration. This product also presented the best physical-chemical results related to consistency, syneresis and water holding capacity. However, the isolated use of gelatin increased fermentation time of the soy yoghurt.

A potential synbiotic product improves the lipid profile of diabetic rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anelastic Relaxation Measurements in Nb-46wt%Ti Alloys with Interstitial Solutes in Solid Solution

Anelastic relaxation measurements were performed in a Nb-46wt%Ti alloy, in the temperature range of 300 to 700 K, using a torsion pendulum operating at an oscillating frequency near 2.0 Hz. The samples were measured in different conditions: cold worked, annealed in ultra-high vacuum and doped with several quantities of nitrogen. The relaxation spectra obtained were resolved into their component peaks, corresponding to the different kinds of interaction of the interstitial solutes with the metallic matrix. The relaxation parameters of each process were calculated using Debye's elementary peaks.

A Comparison of Deep Drawing and Ironing of Metal Alloy Strip Produced conventionally and Non-conventionally via Semi Solid Material Processing

A semi solid thin strip continuous casting process was used to obtain 50%wt Pb/50%wtSn strip by single and twin roll processing at speed of 15 m/min. A 50%wt Pb/50%wtSn plate ingot was also cast for rolling conventionally into strips of 1.4 mm thickness and 45 mm width for comparison with those achieved non-conventionally. This hypoeutectic alloy has a solidification interval and fusion temperature of approximately 31 degrees C and 215 degrees C respectively. The casting alloy temperature was around 280 degrees C as measured by a type K immersion thermocouple prior to pouring into a tundish designed to maintain a constant melt flow on the cooling slope during semi solid material production. A nozzle with a weir ensures that the semi solid material is dragged smoothly by the lower roll, producing strip with minimum contamination of slag/oxide. The temperatures of the cooling slope and the lower roll were also monitored using K type thermocouples. The coiled semi solid strip, which has a thickness of 1.5 mm and 45 mm width, was rolled conventionally in order to obtain 1.2 mm thick strip. The coiled thixorolled strip had a thickness of 1.2 mm and achieved practically the same width as the conventional strips. Blanks of 40 mm diameter were cut from the strips in a mechanical press, ready for deep drawing and ironing for mechanical characterization. All the strips achieved from non-conventional processing had the same mechanical performance as those achieved conventionally. The limiting drawing ratio (LDR) achieved was approximately 2.0 for all strips. Microscopy examination was made in order to observe phase segregation during processing.

Otimização no uso de martelos e bigornas para quebrar sementes por macacos prego (Cebus flavius e C. libidinosus) no Bioma Caatinga

Recently, capuchin monkeys (Cebus spp.) inhabitants of dry environments and with restriction of fleshy fruits, have been the subject of several studies regarding the use of instruments. During behaviour of using stones to crack open nuts there is evidence of selection of more effective hammers, as well as selection of anvils related to reducing the risk of predation. The aim of this study was to determine whether two groups of capuchin monkeys (C.flavius and and C.libidinosus) inhabitants of the Caatinga of Rio Grande do Norte make choice of hammers and anvils. The record of weight and location of stones indicated active choices of with what (choice of hammers) and where (selection of anvils) to crack open encapsulated seeds. The choice of hammers to break nuts depended on the type and degree of ripeness seed. Thus, smaller seeds were smashed with lighter hammers and larger seeds with heavier hammers. Still, C. flavius was the only species that presented a refinement in the choice of hammers that depended on the ripeness of seeds. For both species of capuchin monkeys studied, the nut-crack sites were not spread in accordance with the spatial distribution of seed-producing species, suggesting that the capuchin monkeys promote active choice of anvils. Thus, in environments with more escape routes through the trees, the nut-crack sites were found further apart than in regions that had less chance of escape through the trees. Also, there was a difference in the spacing of the anvils to depend on the type of seed: sites used to crack larger and more caloric seeds were found farther apart than the sites used to crack smaller and less caloric seeds, suggesting a pattern of avoiding direct competition. We conclude that the capuchin monkeys maximize energy savings and reduced risk of predation and the costs of food competition during the behaviour of using stones to crack open nuts

Evaluation of strip rolling directly from the semi-solid state

defect metal alloy strip when thixorolling directly from the semi-solid state. To facilitate the study lead/tin alloys were chosen for their relatively low operating temperature. The objective is to extrapolate these findings to the higher temperature aluminium, alloys. Three alloys (70%Pb30%Sn, 60%Pb-40%Sn, 50%Pb-50%wtSn) were used particularly to study the influence of the solidification interval. The equipment consists of a two roll mill arranged as an upper and lower roller, where both rollers are driven at a controlled speed. The lower roller is fed with semi solid alloy through a ceramic nozzle attached to the lower end of a cooling slope. Several types of nozzle and their position at the roller were tested. This produced different solidifications and consequently different finished strip. The alloys were first cast and then poured onto the cooling slope through a tundish in order to create a continuous laminar flow of slurry and uniformity of metal strip quality. The pouring was tested at different positions along the slope. The cooling slope was coated with colloidal graphite to promote a smooth slurry flow and avoid the problem of adherence and premature solidification. The metallic slurry not only cools along the slope but is also initially super-cooled to a mush by the lower roller whilst at room temperatures, thus enabling thixorolling. It was also found that the nozzle position could be adjusted to enable the upper roller to also contribute to the solidification of the metallic slurry. However the rollers and the cooling slope naturally heat up. Temperature distribution in these zones was analysed by means of three thermocouples positioned along the cooling slope and a fourth in the base of the semi solid pool within the nozzle. The objective being to design an optimum pouring and cooling system. The formed strip was cooled down to room temperature with a shower of water. Microstructures of the thixorolling process were analysed. The differences in solidification conditions resulted in differing qualities of finished strip and corresponding defect types, all of which are a serious quality issue for the rolled product.

Desempenho agronômico da cultura do milho e espécies forrageiras em sistema de Integração Lavoura-Pecuária no Cerrado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos epidemiológicos e controle químico de Phakopsora euvitis

Em janeiro de 2003 foram constatados sintomas típicos de ferrugem em folhas maduras de videira (Vitis vinifera), nas áreas experimentais da Universidade Estadual Paulista, Campus de Ilha Solteira, em Selvíria - MS e Ilha Solteira - SP. Este é o primeiro relato desta doença da videira no Centro-Oeste do Brasil. Considerando a intensidade da doença, a importância da cultura da videira na região e a falta de informações sobre a ferrugem, os objetivos deste trabalho foram: reconfirmar a patogenicidade de Phakopsora euvitis; estudar a influência da luz e da temperatura na germinação de urediniósporos; estudar o efeito do tipo de superfície na germinação de urediniósporos; determinar a longevidade in vivo de urediniósporos e avaliar a eficiência agronômica de fungicidas para o controle da ferrugem. Sintomas da ferrugem foram verificados somente em folhas maduras de videira. A temperatura de 25 ºC, no escuro, e a superfície inferior da folha de videira foram as melhores condições para a germinação de urediniósporos de P. euvitis. A germinação dos urediniósporos foi reduzida em 94%, em folhas de videira que foram retiradas das plantas e mantidas durante sete dias na superfície do solo. em dois experimentos realizados em campo constatou-se que os fungicidas tebuconazole, propiconazole e azoxystrobin proporcionaram as menores intensidades da doença. Tebuconazole apresentou-se como o fungicida mais eficiente no controle da ferrugem. No geral, maior intensidade da ferrugem foi observada em videira conduzida no sistema de espaldeira.

Allelic Frequencies of HPA-1 to 5 Human Platelet Antigens in Patients Infected With Hepatitis C Virus

Studies have suggested that hepatitis C virus (HCV) may infect not only hepatocytes but may also be carried by platelets. Platelets express more than 20 polymorphic antigenic determinants on their surface, which are called human platelet antigens (HPA), To determine the allele frequency of the HPA-1 to -5 in patients infected with HCV, blood samples were collected from 257 blood donors for the control group and from 191 patients infected with HCV. DNA was isolated and amplified for genes HPA-1 to -4 using PCR Sequence Specific Primers (PCR-SSP) and HPA-5 using PCR-Restriction Fragment Length Polymorphism (PCR-RFLP). The allelic and genotypic frequency of HPA-5a in patients infected with HCV was found to be significantly lower(P < 0.05) than in the controls, and HPA-5b from patients infected with HCV was significantly higher (P < 0.05) than in controls. The increase in HPA5b allelic frequency in HCV infection may indicate a possible association between HCV infection and HPAs. J. Med. Virol. 81:757-759, 2009. (C) 2009 Wiley-Liss, Inc.

Human Platelet Antigen Genotype Is Associated With Progression of Fibrosis in Chronic Hepatitis C

Although progression of fibrosis in the chronic hepatitis C depends on environmental, viral, and host factors, genetic polymorphisms have been associated recently with this progression, including the expression of integrins, adhesion proteins. Some integrins expressed on the platelet membrane show polymorphic antigenic determinants called human platelet antigens (HPA), where the major ones are HPA-1, -3, -5. The association between HCV infection and HPA-5b has been demonstrated. Similarly, the HPA profile could determine if HPA is related to progression of fibrosis. The goal of this study was to evaluate the association between the frequencies of HPA-1, -3, and -5 and degree of fibrosis in HCV-infected patients. Genomic DNA from 143 HCV-infected patients was used as the source for HPA genotyping by PCR-SSP or PCR-RFLP. Progression of fibrosis was evaluated using the METAVIR scoring system, and the patients were grouped according to degree of fibrosis into G1 (n = 81, with F1, portal fibrosis without septa or F2, few septa) and G2 (n = 62, with F3, numerous septa, or F4, cirrhosis). Statistical analysis was performed using the proportional odds model. The genotypic frequency of HPA-1a/1b was significantly higher in the patients in G2. To evaluate the influence of the time of infection to the development of fibrosis and its effect on the genetic factor HPA-1, 96 patients from 143 studied were evaluated considering the time of HCV infection, and these results suggest that the HPA-1a/1b genotype promotes the development of fibrosis in HCV infection with time. J. Med. Virol. 84: 56-60, 2012. (C) 2011 Wiley Periodicals, Inc.

Biorreguladores na brotação da videira ‘superior seedless’

Aiming to study the affect of commercial biorregulators Stimulate (R) e X-Cyte (R) over sprouting uniformity of Superior Seedless grape cultivar, pruned in May 22, 2006, a field trial was carried out at at Koshiyama farm, in Juazeiro municipality (Bahia State / Northeastern Brazil). The trial was carried out in randomized blocks with four replications and three useful plants per plot, six stakes per plant were evaluated. Forty-eight hours after yield prun, the stakes were sprayed with T1: Dormex (R) (5%); T2: Dormex (R) (5%) + Nitro Plus 9 (R); T3: Stimulate (R) (0,5%); T4: Stimulate (R) (0,5%) + Nitro Plus 9 (R); T5: Stimulate (R) (1,0%); T6: Stimulate (R) (1,0%) + Nitro Plus 9 (R); T7: X-Cyte (R) (0,25%); T8: X-Cyte (R) (0,25%) + Nitro Plus 9 (R); T9: X-Cyte (R) (0,5%); T10: X-Cyte (R) (0,5%) + Nitro Plus 9 (R); T11: X-Cyte (R) (0,25%) + Stimulate (R) (0,5%); T12: X-Cyte (R) (0,25%) + Stimulate (R) (0,5%) + Nitro Plus 9 (R), Nitro Plus 9 (R) used at a rate of 100 L ha(-1) via ferti-irrigation. Results show that Stimulate (R) and X-Cyte (R), when compared to the commercial product Dormex (R) commercially, did not show significant effects on the sprouts number after sproutings and proportion of grown stems; products that as an alternative the Dormex (R) in yield the grape 'Superior Seedless', at the studied conditions.

Uso de bioestimulante na videira 'Niagara Rosada'

O experimento foi realizado no período de agosto a dezembro de 2004, em vinhedo de 'Niagara Rosada' localizado em Pratânea-SP. O objetivo foi avaliar o efeito de bioestimulante nas características morfológicas e físico-químicas dos cachos de uva 'Niagara Rosada'. Os tratamentos consistiram na pulverização dos cachos com o bioestimulante nas doses de 0, 5, 10, 15 e 20 mg L-1, 25 dias após o pleno florescimento. O delineamento estatístico utilizado foi em blocos ao acaso com cinco repetições, e parcelas constituídas por 3 cachos. Analisou-se a massa fresca, comprimento e largura dos cachos e bagos, massa fresca do engaço, número de bagos por cacho, diâmetro do pedicelo, teor de sólidos solúveis totais, acidez titulável e o pH. Concluiu-se que o bioestimulante promoveu aumento linear no comprimento do cacho, aumento quadrático no diâmetro do pedicelo e um decréscimo linear no teor de sólidos solúveis totais.

Crystallization and preliminary X-ray diffraction analysis of crotoxin B from Crotalus durissus collilineatus venom

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Topography-specific spindle frequency changes in Obstructive Sleep Apnea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)