A few-body treatment of low energy atomic collisions involving exotic particles

Faddeev-type equations are applied to three-charged particle systems. The rather satisfactory results are obtained for low energy e(+)H elastic scattering and muonic transfer reactions. The cross sections for antihydrogen formation from antiproton-positronium collisions are calculated using a six state model (Ps[1s2s2p], (H) over bar[1s2s2p]).

General soliton matrices in the Riemann-Hilbert problem for integrable nonlinear equations

We derive the soliton matrices corresponding to an arbitrary number of higher-order normal zeros for the matrix Riemann-Hilbert problem of arbitrary matrix dimension, thus giving the complete solution to the problem of higher-order solitons. Our soliton matrices explicitly give all higher-order multisoliton solutions to the nonlinear partial differential equations integrable through the matrix Riemann-Hilbert problem. We have applied these general results to the three-wave interaction system, and derived new classes of higher-order soliton and two-soliton solutions, in complement to those from our previous publication [Stud. Appl. Math. 110, 297 (2003)], where only the elementary higher-order zeros were considered. The higher-order solitons corresponding to nonelementary zeros generically describe the simultaneous breakup of a pumping wave (u(3)) into the other two components (u(1) and u(2)) and merger of u(1) and u(2) waves into the pumping u(3) wave. The two-soliton solutions corresponding to two simple zeros generically describe the breakup of the pumping u(3) wave into the u(1) and u(2) components, and the reverse process. In the nongeneric cases, these two-soliton solutions could describe the elastic interaction of the u(1) and u(2) waves, thus reproducing previous results obtained by Zakharov and Manakov [Zh. Eksp. Teor. Fiz. 69, 1654 (1975)] and Kaup [Stud. Appl. Math. 55, 9 (1976)]. (C) 2003 American Institute of Physics.

Three-Higgs-doublet model with A(4) symmetry

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Automatic Classification of Three-Phase Flow Patterns of Heavy Oil in a Horizontal Pipe Using Support Vector Machines

The pipe flow of a viscous-oil-gas-water mixture such as that involved in heavy oil production is a rather complex thereto-fluid dynamical problem. Considering the complexity of three-phase flow, it is of fundamental importance the introduction of a flow pattern classification tool to obtain useful information about the flow structure. Flow patterns are important because they indicate the degree of mixing during flow and the spatial distribution of phases. In particular, the pressure drop and temperature evolution along the pipe is highly dependent on the spatial configuration of the phases. In this work we investigate the three-phase water-assisted flow patterns, i.e. those configurations where water is injected in order to reduce friction caused by the viscous oil. Phase flow rates and pressure drop data from previous laboratory experiments in a horizontal pipe are used for flow pattern identification by means of the 'support vector machine' technique (SVM).

L-carnitine as an ergogenic aid for patients with chronic obstructive pulmonary disease submitted to whole-body and respiratory muscle training programs

The effects of adding L-carnitine to a whole-body and respiratory training program were determined in moderate-to-severe chronic obstructive pulmonary disease (COPD) patients. Sixteen COPD patients (66 ± 7 years) were randomly assigned to L-carnitine (CG) or placebo group (PG) that received either L-carnitine or saline solution (2 g/day, orally) for 6 weeks (forced expiratory volume on first second was 38 ± 16 and 36 ± 12%, respectively). Both groups participated in three weekly 30-min treadmill and threshold inspiratory muscle training sessions, with 3 sets of 10 loaded inspirations (40%) at maximal inspiratory pressure. Nutritional status, exercise tolerance on a treadmill and six-minute walking test, blood lactate, heart rate, blood pressure, and respiratory muscle strength were determined as baseline and on day 42. Maximal capacity in the incremental exercise test was significantly improved in both groups (P < 0.05). Blood lactate, blood pressure, oxygen saturation, and heart rate at identical exercise levels were lower in CG after training (P < 0.05). Inspiratory muscle strength and walking test tolerance were significantly improved in both groups, but the gains of CG were significantly higher than those of PG (40 ± 14 vs 14 ± 5 cmH2O, and 87 ± 30 vs 34 ± 29 m, respectively; P < 0.05). Blood lactate concentration was significantly lower in CG than in PG (1.6 ± 0.7 vs 2.3 ± 0.7 mM, P < 0.05). The present data suggest that carnitine can improve exercise tolerance and inspiratory muscle strength in COPD patients, as well as reduce lactate production.

Development and applications of three-dimensional gamma ray tomography system using ray casting volume rendering techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

QTL affecting body weight in a candidate region of cattle chromosome 5

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Net and metabolizable protein requirements for body weight gain in hair and wool lambs

Protein is one of the limiting factors in animal production, and the knowledge of protein requirements by livestock is crucial for the success of a commercial animal raising enterprise. Thirty-four castrated lambs, 17 of them F1 Ideal x lie de France wool lambs and the remaining ones were Santa Ines hair lambs, with homogeneous initial BW, were used in the experiment. Five animals from each genotype were slaughtered in the beginning of the experimental period and used as reference. Diets (D) were composed of concentrate mix (C) and Cynodon sp. c.v. Tifton 85 hay (R), combined in three different ratios: D1 =60CAOR; D2=40C:60R and D3=20C:80R. Animals of each group of three lambs, that showed simultaneously an initial BW of 20 +/- 0.14 kg at the beginning of the dietary regimen, were slaughtered when one of them reached 35 kg, what always happened to be the one fed with D1. Net requirements for BW gain in wool lamb, fleece-free, ranged from 101 to 110 g of protein/kg BW, and for hair lamb ranged from 1 10 to 118 g of protein/kg BW. Net protein requirements for wool production ranged from 634 to 642 g/kg of produced wool. Hair lambs presented a 7.8-9.5% higher estimated net protein requirements than wool lambs, according to BW and daily weight gain (DG). Total net protein requirements for Santa Ines and wool lambs, with 30 kg of initial B W and an approximate 200 g mean DG, were 48.5 and 45.4 g/day, respectively. Metabolizable protein requirements for Santa Ines and wool lambs, with 20 kg of initial BW and an approximate 200 g mean DG were 59.4 g and 76.5 -/day, respectively. Net protein requirements for wool production was 64g/100g of produced wool. Thus, under the conditions of this experiment, it is concluded that hair lambs showed a higher concentration of protein in the body, more efficient use of the ingested protein and a consequent additional BW gain when fed isoproteic diets as compared to F1 Ideal x Ile de France wool lambs. (c) 2006 Elsevier B.V All rights reserved.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Chondroitin sulfate proteoglycans are structural renewable constituents of the rabbit vitreous body

Purpose: To characterize the vitreous intrinsic proteoglycans, investigate their dynamics, and examine their role in the supramolecular organization of the vitreous. Methods: Vitreous from normal rabbits was collected and processed for observation with the transmission electron microscope after treatment with glycosidases. Also, rabbits were injected intravitreally with [S-35]-sodium sulfate and sacrificed at several time intervals after the injection. Proteoglycans (PGs) were assayed in the vitreous supernatant or in whole samples extracted with guanidine hydrochloride by polyacrylamide or agarose gel electrophoresis, followed respectively by fluorography or autoradiography, and ion-exchange chromatography and gel-filtration chromatography, combined with glycolytic treatment of the samples. The sulfated glycosaminoglycans (GAGs) were characterized by agarose gel electrophoresis after treating vitreous samples with protease and specific glycosidases. Results: the electron microscopic study revealed a network with hyaluronic acid ( HA) as thin threads coating and connecting collagen fibrils. The elimination of the HA coat showed chondroitin sulfate granules (8-25 nm) arranged at regular intervals on the fibril surface. The chondroitinase ABC digestion, besides removing the granules, also caused the formation of thicker bundles of the collagen fibrils. The PG and GAG analysis indicated that there are three renewable PGs in the vitreous ( e. g., one heparan-and two chondroitin-sulfate ones). Conclusions: At least one of the chondroitin sulfate PGs is involved in the interactions that occur in the vitreous structure, mainly by providing adequate spacing between the collagen fibrils, a condition that is probably required for the transparency of the vitreous.

Torpor in three species of Brazilian hummingbirds under semi-natural conditions

We measured body temperatures in three species of Brazilian hummingbirds, the Versicolored Emerald (Amazilia versicolor; body mass 4.1 g), the Black Jacobin (Me lantrochilus fuscus; body mass 7.7 g) and the Swallow-tailed Hummingbird (Eupetomena macroura; body mass 8.6 g), during overnight exposure to natural conditions of photoperiod and ambient temperatures. All three species entered torpor. In both A. versicolor and E. macroura, individuals entered torpor even if they had access to feeders up to the time of sunset. In contrast, M. fuscus was less prone to enter torpor and did so mainly if it had been fasting for more than two hours before sunset. Furthermore, M. fuscus often spent the whole night in torpor, whereas the two other species entered torpor for a variable, often short, period of the night. We observed more than one torpor bout during a single night in all three species. We suggest that multiple nocturnal torpors result from interruption of the normal torpor pattern by some (unknown) external stimuli. Any interrupted torpor was always followed by a new entry into torpor, supporting the view that there is a body mass threshold below which the hummingbirds must enter torpor Our data also indicate that these hummingbird species might use torpor even if they are not energetically stressed.

Effects of soy protein and resistance exercise on body composition and blood lipids in postmenopausal women

Objective: To assess the effect of soy protein and progressive resistance training on body composition and lipids in postmenopausal women.Design: In a controlled trial, 46 postmenopausal women were randomized to one of four groups: 25 g of soy protein (SP, n = 10), 25 g of soy protein plus resistance exercise (SPE, n = 14), 25 g of maltodextrine (placebo) (PL, n = 11), or placebo plus resistance exercise (PLE, n = 11). Progressive resistance training was held three times a week for 16 weeks and included 8 exercises (3 series of 8-12 repetitions). At baseline and after 16 weeks, body mass index, waist circumference (WC), body fat, muscle mass and serum lipid levels were measured. To confirm isoflavone absorption, urinary concentrations were determined. The t-test of Student and ANOVA were used in the statistical analysis.Results: Subjects were classified as overweight and showed android fat distribution: Urinary isoflavone excretion indicated compliance to soy protein treatment. After 16 weeks of intervention, both SPE and PLE groups showed a significant increase of 1.3 kg in muscle mass and reduction in WC of -1.4 and -2.1 cm, respectively (p < 0.05). Significant decreases in the mean values of total cholesterol and LDL (-29.0 and -24.0 mg/dL, p < 0.001 and p < 0.006, respectively) were observed in the users of soy protein alone (SP).Conclusions: Soy protein supplementation did not influence the indicators of body composition. However, it exerted possible favorable effects on lipid profile in postmenopausal women. The increase in muscle mass and reduction in abdominal fat were correlated with resistance training. (c) 2006 Elsevier B.V.. All rights reserved.

Effect of chronic treatment with Clomipramine on food intake, macronutrient selection and body weight gain in rats

Long-term treatment with clomipramine (CMI), a tricyclic antidepressant, induces food craving and body weight gain in patients. The present study investigated the effects of chronic treatment with CMI on total food intake, macronutrient selection, and body weight gain in rats. Male Wistar rats were maintained on a dietary self-selection regime with separate sources of protein, fat and carbohydrate. Animals received i.p. injections of CMI (0, 3, 10, 30 mg/kg) during 27 consecutive days. Food consumption and body weight were recorded daily and results were calculated as average of three consecutive days, namely during pre-treatment (3 d before pharmacological treatment), treatment (7th-9th; l6th-l8th and 25th-27th days), and post-treatment (28th-33rd days). Results showed that CMI (30 mg/kg) significantly decreased energy intake during all treatment period, an effect that was related to a decrease in both carbohydrate-rich diet intake and body weight gain. At dose of 3 mg/kg CMI increased the total energy intake in the 16th-18th days, suggesting an apparent biphasic effect of chronic treatment with CMI on caloric intake. Chronic administration with CMI (27 d) did not alter protein-rich or fat-rich diet consumption. The main result of this study indicated that chronic treatment with CMI decreases rather than increase food consumption and body weight gain in rats exposed to a macronutrient self-selection procedure.

Numerical study of low-cost alternative orbits around the Moon

In this paper, we have investigated a region of direct stable orbits around the Moon, whose stability is related to the H2 Family of periodic orbits and to the quasi-periodic orbits that oscillate around them. The stability criteria adopted was that the path did not escape from the Moon during an integration period of 1000 days (remaining with negative two-body Moon-probe orbital energy during this period). Considering the three-dimensional four-body Sun-Earth-Moon-probe problem, we investigated the evolution of the size of the stability region, taking into account the eccentricity of the Earth's orbit, the eccentricity and inclination of the Moon's orbit, and the solar radiation pressure on the probe. We also investigated the evolution of the region's size and its location by varying the inclination of the probe's initial osculating orbit relative to the Moon's orbital plane between 0 degrees and 180 degrees. The size of the stability region diminishes; nevertheless, it remains significant for 0 <= i <= 25 degrees and 35 degrees <= i <= 45 degrees. The orbits of this region could be useful for missions by space vehicles that must remain in orbit around the Moon for periods of up to 1000 days, requiring low maintenance costs. (c) 2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

Simple heuristics for the assembly line worker assignment and balancing problem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)