Accounting research: a critical view of the present situation and prospects

In this study we critically review the internal procedures of the accounting community for generating and disseminating knowledge. We contend that academic journals on accounting research are scarce, publish few articles and apply high rejection rates, and the review process is lengthy and expensive. Additionally, an academic elite has unparalleled predominance in comparison to other business disciplines, reflected in an unusual share of published articles with authors affiliated to a small number of academic institutions, and the predominance of certain topics and methodologies. The discipline does not allow the collaborative, iterative and flexible features of innovative knowledge communities. The discipline¿s internal procedures favour restriction, control, slowness, and expiration, rather than participation, speed and renewal. They are ill suited for advancing knowledge and bode badly for successful research. As a result, accounting academics present low research performance and the discipline is facing steady decline. More importantly, the discipline is handicapped in producing innovative knowledge able to contribute to critical research and long term social well-being. We also focus on the Spanish institutional situation, arguing that Spanish requirements for reaching tenured positions are difficult for accountants to meet. We highlight the need to raise awareness of the problem and change the procedures.

Bias in dissemination of clinical research findings: structured OPEN framework of what, who and why, based on literature review and expert consensus.

OBJECTIVE: The aim of this study is to review highly cited articles that focus on non-publication of studies, and to develop a consistent and comprehensive approach to defining (non-) dissemination of research findings. SETTING: We performed a scoping review of definitions of the term 'publication bias' in highly cited publications. PARTICIPANTS: Ideas and experiences of a core group of authors were collected in a draft document, which was complemented by the findings from our literature search. INTERVENTIONS: The draft document including findings from the literature search was circulated to an international group of experts and revised until no additional ideas emerged and consensus was reached. PRIMARY OUTCOMES: We propose a new approach to the comprehensive conceptualisation of (non-) dissemination of research. SECONDARY OUTCOMES: Our 'What, Who and Why?' approach includes issues that need to be considered when disseminating research findings (What?), the different players who should assume responsibility during the various stages of conducting a clinical trial and disseminating clinical trial documents (Who?), and motivations that might lead the various players to disseminate findings selectively, thereby introducing bias in the dissemination process (Why?). CONCLUSIONS: Our comprehensive framework of (non-) dissemination of research findings, based on the results of a scoping literature search and expert consensus will facilitate the development of future policies and guidelines regarding the multifaceted issue of selective publication, historically referred to as 'publication bias'.

Mediterranean-climate streams and rivers: geographically separated but ecologically comparable freshwater systems

Streams and rivers in mediterranean-climate regions (med-rivers in med-regions) are ecologically unique, with flow regimes reflecting precipitation patterns. Although timing of drying and flooding is predictable, seasonal and annual intensity of these events is not. Sequential flooding and drying, coupled with anthropogenic influences make these med-rivers among the most stressed riverine habitat worldwide. Med-rivers are hotspots for biodiversity in all med-regions. Species in med-rivers require different, often opposing adaptive mechanisms to survive drought and flood conditions or recover from them. Thus, metacommunities undergo seasonal differences, reflecting cycles of river fragmentation and connectivity, which also affect ecosystem functioning. River conservation and management is challenging, and trade-offs between environmental and human uses are complex, especially under future climate change scenarios. This overview of a Special Issue on med-rivers synthesizes information presented in 21 articles covering the five med-regions worldwide: Mediterranean Basin, coastal California, central Chile, Cape region of South Africa, and southwest and southern Australia. Research programs to increase basic knowledge in less-developed med-regions should be prioritized to achieve increased abilities to better manage med-rivers.

The use of future-oriented knowledge in regional innovation processes: Research on knowledge generation, transfer and conversion

The importance of the regional level in research has risen in the last few decades and a vast literature in the fields of, for instance, evolutionary and institutional economics, network theories, innovations and learning systems, as well as sociology, has focused on regional level questions. Recently the policy makers and regional actors have also began to pay increasing attention to the knowledge economy and its needs, in general, and the connectivity and support structures of regional clusters in particular. Nowadays knowledge is generally considered as the most important source of competitive advantage, but even the most specialised forms of knowledge are becoming a short-lived resource for example due to the accelerating pace of technological change. This emphasizes the need of foresight activities in national, regional and organizational levels and the integration of foresight and innovation activities. In regional setting this development sets great challenges especially in those regions having no university and thus usually very limited resources for research activities. Also the research problem of this dissertation is related to the need to better incorporate the information produced by foresight process to facilitate and to be used in regional practice-based innovation processes. This dissertation is a constructive case study the case being Lahti region and a network facilitating innovation policy adopted in that region. Dissertation consists of a summary and five articles and during the research process a construct or a conceptual model for solving this real life problem has been developed. It is also being implemented as part of the network facilitating innovation policy in the Lahti region.

Concepts and Reference. Defending a Dual Theory of Natural Kind Concepts

In this thesis I argue that the psychological study of concepts and categorisation, and the philosophical study of reference are deeply intertwined. I propose that semantic intuitions are a variety of categorisation judgements, determined by concepts, and that because of this, concepts determine reference. I defend a dual theory of natural kind concepts, according to which natural kind concepts have distinct semantic cores and non-semantic identification procedures. Drawing on psychological essentialism, I suggest that the cores consist of externalistic placeholder essence beliefs. The identification procedures, in turn, consist of prototypes, sets of exemplars, or possibly also theory-structured beliefs. I argue that the dual theory is motivated both by experimental data and theoretical considerations. The thesis consists of three interrelated articles. Article I examines philosophical causal and description theories of natural kind term reference, and argues that they involve, or need to involve, certain psychological elements. I propose a unified theory of natural kind term reference, built on the psychology of concepts. Article II presents two semantic adaptations of psychological essentialism, one of which is a strict externalistic Kripkean-Putnamian theory, while the other is a hybrid account, according to which natural kind terms are ambiguous between internalistic and externalistic senses. We present two experiments, the results of which support the strict externalistic theory. Article III examines Fodor’s influential atomistic theory of concepts, according to which no psychological capacities associated with concepts constitute them, or are necessary for reference. I argue, contra Fodor, that the psychological mechanisms are necessary for reference.

Modeling reaction kinetics and mass transfer in ozonation in water solutions

This dissertation is based on four articles dealing with modeling of ozonation. The literature part of this considers some models for hydrodynamics in bubble column simulation. A literature review of methods for obtaining mass transfer coefficients is presented. The methods presented to obtain mass transfer are general models and can be applied to any gas-liquid system. Ozonation reaction models and methods for obtaining stoichiometric coefficients and reaction rate coefficients for ozonation reactions are discussed in the final section of the literature part. In the first article, ozone gas-liquid mass transfer into water in a bubble column was investigated for different pH values. A more general method for estimation of mass transfer and Henry’s coefficient was developed from the Beltrán method. The ozone volumetric mass transfer coefficient and the Henry’s coefficient were determined simultaneously by parameter estimation using a nonlinear optimization method. A minor dependence of the Henry’s law constant on pH was detected at the pH range 4 - 9. In the second article, a new method using the axial dispersion model for estimation of ozone self-decomposition kinetics in a semi-batch bubble column reactor was developed. The reaction rate coefficients for literature equations of ozone decomposition and the gas phase dispersion coefficient were estimated and compared with the literature data. The reaction order in the pH range 7-10 with respect to ozone 1.12 and 0.51 the hydroxyl ion were obtained, which is in good agreement with literature. The model parameters were determined by parameter estimation using a nonlinear optimization method. Sensitivity analysis was conducted using object function method to obtain information about the reliability and identifiability of the estimated parameters. In the third article, the reaction rate coefficients and the stoichiometric coefficients in the reaction of ozone with the model component p-nitrophenol were estimated at low pH of water using nonlinear optimization. A novel method for estimation of multireaction model parameters in ozonation was developed. In this method the concentration of unknown intermediate compounds is presented as a residual COD (chemical oxygen demand) calculated from the measured COD and the theoretical COD for the known species. The decomposition rate of p-nitrophenol on the pathway producing hydroquinone was found to be about two times faster than the p-nitrophenol decomposition rate on the pathway producing 4- nitrocatechol. In the fourth article, the reaction kinetics of p-nitrophenol ozonation was studied in a bubble column at pH 2. Using the new reaction kinetic model presented in the previous article, the reaction kinetic parameters, rate coefficients, and stoichiometric coefficients as well as the mass transfer coefficient were estimated with nonlinear estimation. The decomposition rate of pnitrophenol was found to be equal both on the pathway producing hydroquinone and on the path way producing 4-nitrocathecol. Comparison of the rate coefficients with the case at initial pH 5 indicates that the p-nitrophenol degradation producing 4- nitrocathecol is more selective towards molecular ozone than the reaction producing hydroquinone. The identifiability and reliability of the estimated parameters were analyzed with the Marcov chain Monte Carlo (MCMC) method. @All rights reserved. No part of the publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of the author.

Neurocognition in schizophrenia: a study of the productivity and visibility of spanish authors

This paper provides a map of the scientific productivity of authors affiliated to a Spanish institution and who have addressed one of the most important current topics in schizophrenia: The study of cognitive performance. A search of the Web of Science yielded 125 articles that met the inclusion criteria. In order to provide a comprehensive overview of scientific productivity, we examine several bibliometric indicators, concerning both productivity and impact or visibility. The analysis also focuses on qualitative aspects of key theoretical importance, such as the kinds of cognitive functions that are most often assessed and the tests most widely used to evaluate them in clinical practice. The study shows that interest in the subject of cognitive function in schizophrenia has increased considerably in Spain since the beginning of this century. The results also highlight the need to standardize the type of tests to be used in the cognitive assessment of patients with schizophrenia.

Gambling in Spain: update on experience, research and policy

AIMS: To describe the current situation of gambling in Spain, sketching its history and discussing the regulations and legislation currently in force within the framework of the European Union (EU), and to review the epidemiology of gambling in Spain, the self-help groups and professional treatments available, and their potential effectiveness. METHODS: A systematic computerized search was performed in three databases (EMBASE, PubMed and PsychINFO, including articles and chapters) and the reference lists from previous reviews to obtain some of the most relevant studies published up to now on the topic of pathologic gambling in Spain. RESULTS: Similar to other EU countries, Spain has a high prevalence of pathologic gambling, focused on specific culturally bounded types of gambling. Expenditure in online gaming has risen significantly in the last few years, prompting the Spanish government to draft new legislation to regulate gaming. CONCLUSIONS: The gaming industry is expected to be one of the fastest growing sectors in Spain in the coming years owing to the rise of new technologies and the development of online gaming

Analytical procedures for determining Pb and Sr isotopic compositions in water samples by ID-TIMS

Few articles deal with lead and strontium isotopic analysis of water samples. The aim of this study was to define the chemical procedures for Pb and Sr isotopic analyses of groundwater samples from an urban sedimentary aquifer. Thirty lead and fourteen strontium isotopic analyses were performed to test different analytical procedures. Pb and Sr isotopic ratios as well as Sr concentration did not vary using different chemical procedures. However, the Pb concentrations were very dependent on the different procedures. Therefore, the choice of the best analytical procedure was based on the Pb results, which indicated a higher reproducibility from samples that had been filtered and acidified before the evaporation, had their residues totally dissolved, and were purified by ion chromatography using the Biorad® column. Our results showed no changes in Pb ratios with the storage time.

Abstracts of the refereed articles

Pia Karlsson Minganti : Becoming a "practising muslim", Karoliina Ojanen : Field experience and analytical knowledge.

Wet oxidation of recalcitrant lignin waters: Experimental and kinetic studies

The dissertation is based on four articles dealing with recalcitrant lignin water purification. Lignin, a complicated substance and recalcitrant to most treatment technologies, inhibits seriously pulp and paper industry waste management. Therefore, lignin is studied, using WO as a process method for its degradation. A special attention is paid to the improvement in biodegradability and the reduction of lignin content, since they have special importance for any following biological treatment. In most cases wet oxidation is not used as a complete ' mineralization method but as a pre treatment in order to eliminate toxic components and to reduce the high level of organics produced. The combination of wet oxidation with a biological treatment can be a good option due to its effectiveness and its relatively low technology cost. The literature part gives an overview of Advanced Oxidation Processes (AOPs). A hot oxidation process, wet oxidation (WO), is investigated in detail and is the AOP process used in the research. The background and main principles of wet oxidation, its industrial applications, the combination of wet oxidation with other water treatment technologies, principal reactions in WO, and key aspects of modelling and reaction kinetics are presented. There is also given a wood composition and lignin characterization (chemical composition, structure and origin), lignin containing waters, lignin degradation and reuse possibilities, and purification practices for lignin containing waters. The aim of the research was to investigate the effect of the operating conditions of WO, such as temperature, partial pressure of oxygen, pH and initial concentration of wastewater, on the efficiency, and to enhance the process and estimate optimal conditions for WO of recalcitrant lignin waters. Two different waters are studied (a lignin water model solution and debarking water from paper industry) to give as appropriate conditions as possible. Due to the great importance of re using and minimizing the residues of industries, further research is carried out using residual ash of an Estonian power plant as a catalyst in wet oxidation of lignin-containing water. Developing a kinetic model that includes in the prediction such parameters as TOC gives the opportunity to estimate the amount of emerging inorganic substances (degradation rate of waste) and not only the decrease of COD and BOD. The degradation target compound, lignin is included into the model through its COD value (CODligning). Such a kinetic model can be valuable in developing WO treatment processes for lignin containing waters, or other wastewaters containing one or more target compounds. In the first article, wet oxidation of "pure" lignin water was investigated as a model case with the aim of degrading lignin and enhancing water biodegradability. The experiments were performed at various temperatures (110 -190°C), partial oxygen pressures (0.5 -1.5 MPa) and pH (5, 9 and 12). The experiments showed that increasing the temperature notably improved the processes efficiency. 75% lignin reduction was detected at the lowest temperature tested and lignin removal improved to 100% at 190°C. The effect of temperature on the COD removal rate was lower, but clearly detectable. 53% of organics were oxidized at 190°C. The effect of pH occurred mostly on lignin removal. Increasing the pH enhanced the lignin removal efficiency from 60% to nearly 100%. A good biodegradability ratio (over 0.5) was generally achieved. The aim of the second article was to develop a mathematical model for "pure" lignin wet oxidation using lumped characteristics of water (COD, BOD, TOC) and lignin concentration. The model agreed well with the experimental data (R2 = 0.93 at pH 5 and 12) and concentration changes during wet oxidation followed adequately the experimental results. The model also showed correctly the trend of biodegradability (BOD/COD) changes. In the third article, the purpose of the research was to estimate optimal conditions for wet oxidation (WO) of debarking water from the paper industry. The WO experiments were' performed at various temperatures, partial oxygen pressures and pH. The experiments showed that lignin degradation and organics removal are affected remarkably by temperature and pH. 78-97% lignin reduction was detected at different WO conditions. Initial pH 12 caused faster removal of tannins/lignin content; but initial pH 5 was more effective for removal of total organics, represented by COD and TOC. Most of the decrease in organic substances concentrations occurred in the first 60 minutes. The aim of the fourth article was to compare the behaviour of two reaction kinetic models, based on experiments of wet oxidation of industrial debarking water under different conditions. The simpler model took into account only the changes in COD, BOD and TOC; the advanced model was similar to the model used in the second article. Comparing the results of the models, the second model was found to be more suitable for describing the kinetics of wet oxidation of debarking water. The significance of the reactions involved was compared on the basis of the model: for instance, lignin degraded first to other chemically oxidizable compounds rather than directly to biodegradable products. Catalytic wet oxidation of lignin containing waters is briefly presented at the end of the dissertation. Two completely different catalysts were used: a commercial Pt catalyst and waste power plant ash. CWO showed good performance using 1 g/L of residual ash gave lignin removal of 86% and COD removal of 39% at 150°C (a lower temperature and pressure than with WO). It was noted that the ash catalyst caused a remarkable removal rate for lignin degradation already during the pre heating for `zero' time, 58% of lignin was degraded. In general, wet oxidation is not recommended for use as a complete mineralization method, but as a pre treatment phase to eliminate toxic or difficultly biodegradable components and to reduce the high level of organics. Biological treatment is an appropriate post treatment method since easily biodegradable organic matter remains after the WO process. The combination of wet oxidation with subsequent biological treatment can be an effective option for the treatment of lignin containing waters.

Kinetic modeling of mechanisms of industrially important organic reactions in gas and liquid phase

This dissertation is based on 5 articles which deal with reaction mechanisms of the following selected industrially important organic reactions: 1. dehydrocyclization of n-butylbenzene to produce naphthalene 2. dehydrocyclization of 1-(p-tolyl)-2-methylbutane (MB) to produce 2,6-dimethylnaphthalene 3. esterification of neopentyl glycol (NPG) with different carboxylic acids to produce monoesters 4. skeletal isomerization of 1-pentene to produce 2-methyl-1-butene and 2-methyl-2-butene The results of initial- and integral-rate experiments of n-butylbenzene dehydrocyclization over selfmade chromia/alumina catalyst were applied when investigating reaction 2. Reaction 2 was performed using commercial chromia/alumina of different acidity, platina on silica and vanadium/calcium/alumina as catalysts. On all catalysts used for the dehydrocyclization, major reactions were fragmentation of MB and 1-(p-tolyl)-2-methylbutenes (MBes), dehydrogenation of MB, double bond transfer, hydrogenation and 1,6-cyclization of MBes. Minor reactions were 1,5-cyclization of MBes and methyl group fragmentation of 1,6- cyclization products. Esterification reactions of NPG were performed using three different carboxylic acids: propionic, isobutyric and 2-ethylhexanoic acid. Commercial heterogeneous gellular (Dowex 50WX2), macroreticular (Amberlyst 15) type resins and homogeneous para-toluene sulfonic acid were used as catalysts. At first NPG reacted with carboxylic acids to form corresponding monoester and water. Then monoester esterified with carboxylic acid to form corresponding diester. In disproportionation reaction two monoester molecules formed NPG and corresponding diester. All these three reactions can attain equilibrium. Concerning esterification, water was removed from the reactor in order to prevent backward reaction. Skeletal isomerization experiments of 1-pentene were performed over HZSM-22 catalyst. Isomerization reactions of three different kind were detected: double bond, cis-trans and skeletal isomerization. Minor side reaction were dimerization and fragmentation. Monomolecular and bimolecular reaction mechanisms for skeletal isomerization explained experimental results almost equally well. Pseudohomogeneous kinetic parameters of reactions 1 and 2 were estimated by usual least squares fitting. Concerning reactions 3 and 4 kinetic parameters were estimated by the leastsquares method, but also the possible cross-correlation and identifiability of parameters were determined using Markov chain Monte Carlo (MCMC) method. Finally using MCMC method, the estimation of model parameters and predictions were performed according to the Bayesian paradigm. According to the fitting results suggested reaction mechanisms explained experimental results rather well. When the possible cross-correlation and identifiability of parameters (Reactions 3 and 4) were determined using MCMC method, the parameters identified well, and no pathological cross-correlation could be seen between any parameter pair.

Kant, Nietzsche and the idealization of friendship into nihilism

Is friendship still possible under nihilistic conditions? Kant and Nietzsche are important stages in the history of the idealization of friendship, which leads inevitably to the problem of nihilism. Nietzsche himself claims on the one hand that only something like friendship can save us in our nihilistic condition, but on the other hand that precisely friendship has been unmasked and become impossible by these very conditions. It seems we are struck in the nihilistic paradox of not being allowed to believe in the possibility of what we cannot do without. Literary imagination since the 19th century seems to make us even more skeptical. Maybe Beckett provides an illustration of a way out that fits well to Nietzsche's claim that only "the most moderate, those who do not require any extreme articles of faith" will be able to cope with nihilism.

Equivalence and translation strategies in multilingual thesaurus construction

In the present dissertation, multilingual thesauri were approached as cultural products and the focus was twofold: On the empirical level the focus was placed on the translatability of certain British-English social science indexing terms into the Finnish language and culture at a concept, a term and an indexing term level. On the theoretical level the focus was placed on the aim of translation and on the concept of equivalence. In accordance with modern communicative and dynamic translation theories the interest was on the human dimension. The study is qualitative. In this study, equivalence was understood in a similar way to how dynamic, functional equivalence is commonly understood in translation studies. Translating was seen as a decision-making process, where a translator often has different kinds of possibilities to choose in order to fulfil the function of the translation. Accordingly, and as a starting point for the construction of the empirical part, the function of the source text was considered to be the same or similar to the function of the target text, that is, a functional thesaurus both in source and target context. Further, the study approached the challenges of multilingual thesaurus construction from the perspectives of semantics and pragmatics. In semantic analysis the focus was on what the words conventionally mean and in pragmatics on the ‘invisible’ meaning - or how we recognise what is meant even when it is not actually said (or written). Languages and ideas expressed by languages are created mainly in accordance with expressional needs of the surrounding culture and thesauri were considered to reflect several subcultures and consequently the discourses which represent them. The research material consisted of different kinds of potential discourses: dictionaries, database records, and thesauri, Finnish versus British social science researches, Finnish versus British indexers, simulated indexing tasks with five articles and Finnish versus British thesaurus constructors. In practice, the professional background of the two last mentioned groups was rather similar. It became even more clear that all the material types had their own characteristics, although naturally not entirely separate from each other. It is further noteworthy that the different types and origins of research material were not used to represent true comparison pairs, and that the aim of triangulation of methods and material was to gain a holistic view. The general research questions were: 1. Can differences be found between Finnish and British discourses regarding family roles as thesaurus terms, and if so, what kinds of differences and which are the implications for multilingual thesaurus construction? 2. What is the pragmatic indexing term equivalence? The first question studied how the same topic (family roles) was represented in different contexts and by different users, and further focused on how the possible differences were handled in multilingual thesaurus construction. The second question was based on findings of the previous one, and answered to the final question as to what kinds of factors should be considered when defining translation equivalence in multilingual thesaurus construction. The study used multiple cases and several data collection and analysis methods aiming at theoretical replication and complementarity. The empirical material and analysis consisted of focused interviews (with Finnish and British social scientists, thesaurus constructors and indexers), simulated indexing tasks with Finnish and British indexers, semantic component analysis of dictionary definitions and translations, coword analysis and datasets retrieved in databases, and discourse analysis of thesauri. As a terminological starting point a topic and case family roles was selected. The results were clear: 1) It was possible to identify different discourses. There also existed subdiscourses. For example within the group of social scientists the orientation to qualitative versus quantitative research had an impact on the way they reacted to the studied words and discourses, and indexers placed more emphasis on the information seekers whereas thesaurus constructors approached the construction problems from a more material based solution. The differences between the different specialist groups i.e. the social scientists, the indexers and the thesaurus constructors were often greater than between the different geo-cultural groups i.e. Finnish versus British. The differences occurred as a result of different translation aims, diverging expectations for multilingual thesauri and variety of practices. For multilingual thesaurus construction this means severe challenges. The clearly ambiguous concept of multilingual thesaurus as well as different construction and translation strategies should be considered more precisely in order to shed light on focus and equivalence types, which are clearly not self-evident. The research also revealed the close connection between the aims of multilingual thesauri and the pragmatic indexing term equivalence. 2) The pragmatic indexing term equivalence is very much context-depended. Although thesaurus term equivalence is defined and standardised in the field of library and information science (LIS), it is not understood in one established way and the current LIS tools are inadequate to provide enough analytical tools for both constructing and studying different kinds of multilingual thesauri as well as their indexing term equivalence. The tools provided in translation science were more practical and theoretical, and especially the division of different meanings of a word provided a useful tool in analysing the pragmatic equivalence, which often differs from the ideal model represented in thesaurus construction literature. The study thus showed that the variety of different discourses should be acknowledged, there is a need for operationalisation of new types of multilingual thesauri, and the factors influencing pragmatic indexing term equivalence should be discussed more precisely than is traditionally done.