Sequências de culturas em sistema de semeadura direta: I - produção de matéria seca e acúmulo de nutrientes

Em sistema de semeadura direta, os resíduos das culturas de entressafra são utilizados com as finalidades de proteger a superfície do solo dos agentes erosivos e de promover a ciclagem de nutrientes. O objetivo deste trabalho foi avaliar a produção de matéria seca e o acúmulo de nutrientes nos resíduos vegetais provenientes de diferentes sequências de culturas em semeadura direta. O experimento foi conduzido em Jaboticabal-SP (48° 18' W e 21° 15' S), em um Latossolo Vermelho eutrófico. O delineamento experimental foi em faixas, com três repetições. Os tratamentos foram constituídos pela combinação de três sequências de culturas de verão (rotação soja-milho e monoculturas de milho e de soja) com sete culturas de entressafra (milho, sorgo, girassol, crotalária, guandu, nabo forrageiro e milheto). O experimento iniciou-se em 2002, e o presente estudo refere-se aos anos agrícolas 2007/2008 e 2008/2009. Avaliaram-se as quantidades de matéria seca e o acúmulo de nutrientes pelas culturas. As culturas com colheita de grãos na entressafra (milho, sorgo e girassol) produziram resíduos com menor quantidade de nutrientes acumulados e em menor quantidade de matéria seca, quando comparadas às culturas com trituração no florescimento (crotalária, guandu, nabo forrageiro e milheto). Milheto e crotalária apresentaram as maiores produções de matéria seca e os maiores acúmulos de nutrientes. O milheto mostrou os maiores acúmulos de K e Mg, e a crotalária, maiores acúmulos de N e P. As gramíneas cultivadas na entressafra apresentaram maior desenvolvimento quando em sucessão ao cultivo de soja no verão anterior, com maior produção de matéria seca de milheto e, também, maior produtividade de grãos de milho e sorgo.

Crop sequences in no-tillage system: effects on soil fertility and soybean, maize and rice yield

Os resíduos vegetais das culturas, ao se decomporem, alteram os atributos químicos do solo e, como consequência, influenciam a produtividade das culturas em sucessão. O objetivo deste trabalho foi avaliar os atributos químicos do solo e a produtividade das culturas de soja, milho e arroz, cultivadas no verão, em sucessão a culturas de inverno em semeadura direta. O experimento foi realizado em Jaboticabal-SP (48 ° 18 ' 58 '' W e 21 ° 15 ' 22 '' S), em um Latossolo Vermelho eutrófico. O delineamento experimental foi em blocos ao acaso, no esquema em faixas, com três repetições. Os tratamentos foram constituídos pela combinação de quatro sequências de culturas de verão (monoculturas de milho e soja e rotações soja/milho e arroz/feijão/algodão) com sete culturas de inverno (milho, girassol, nabo forrageiro, milheto, guandu, sorgo e crotalária). Os cultivos iniciaram-se em 2002. Após o manejo das culturas de inverno e antes da semeadura das culturas de verão do ano agrícola 2006/2007, foram coletadas amostras de solo nas camadas de 0-2,5; 2,5-5,0; 5-10; 10-20; e 20-30 cm. Nas amostras de solo, foram determinados: teores de matéria orgânica, pH, teores de P (resina), K, Ca e Mg trocáveis e acidez potencial (H + Al). As sequências de verão rotação soja/milho e milho em monocultura proporcionaram no solo menores teores de matéria orgânica na camada de 0-10 cm e de P do solo na camada de 0-20 cm. Na sequência de verão arroz/feijão/algodão, maiores teores de K foram proporcionados pelas culturas de inverno crotalária e nabo forrageiro, na camada de 0-10 cm, e milheto, na de 0-2,5 cm. Crotalária, milheto, nabo forrageiro e sorgo, cultivados no inverno, proporcionaram maiores teores de matéria orgânica no solo na camada de 0-30 cm. Maiores teores de P no solo foram proporcionados pela crotalária, na camada de 0-2,5 cm, e pelo nabo forrageiro, na de 0-5 cm. Maiores produtividades de soja, como monocultura de verão, foram obtidas após nabo forrageiro e crotalária e, quando em rotação com milho no verão, após nabo forrageiro, crotalária e milheto. Maiores produtividades de milho foram obtidas após nabo forrageiro, milheto e guandu, e menor produtividade de arroz foi obtida após sorgo.

Decomposição e liberação de nitrogênio de resíduos culturais de plantas de cobertura em um solo de cerrado

A produção de massa seca, a taxa de decomposição e a liberação de nitrogênio (N) foram avaliadas em um experimento com sete tipos de cobertura vegetal: milheto pérola (Pennisetum americanum sin. tiphoydes), braquiária (Brachiaria brizantha), sorgo forrageiro (Sorghum bicolor L. Moench), guandu (Cajanus cajan (L.) Millsp), crotalária juncea (Crotalarea juncea) e aveia-preta (Avena strigosa Schreb), em pousio e em área de cultivo convencional (testemunha), em solo de cerrado, em Uberaba, região do Triângulo Mineiro. Dentre as coberturas avaliadas, o milheto e a crotalária foram as que apresentaram a maior produção de massa seca, maior acúmulo e a maior liberação de N. A braquiária foi a cobertura que apresentou a maior taxa de decomposição. Todas as coberturas apresentaram a maior taxa de liberação de N até 42 dias após dessecação.

Physical quality of an Oxisol cultivated with maize submited to cover crops in the pre-cropping period

The intensive use of land alters the distribution of the pore size which imparts consequences on the soil physical quality. The Least Limiting Water Range (LLWR) allows for the visualization of the effects of management systems upon either the improvement or the degradation of the soil physical quality. The objective of this study was to evaluate the physical quality of a Red Latosol (Oxisol) submited to cover crops in the period prior to the maize crop in a no-tillage and conventional tillage system, using porosity, soil bulk density and the LLWR as attributes. The treatments were: conventional tillage (CT) and a no-tillage system with the following cover crops: sunn hemp (Crotalaria juncea L.) (NS), pearl millet (Pennisetum americanum (L.) Leeke) (NP) and lablab (Dolichos lablab L.) (NL). The experimental design was randomized blocks in subdivided plots with six replications, with the plots being constituted by the treatments and the subplots by the layers analyzed. The no-tillage systems showed higher total porosity and soil organic matter at the 0-0.5 m layer for the CT. The CT did not differ from the NL or NS in relation to macroporosity. The NP showed the greater porosity, while CT and NS presented lower soil bulk density. No <= 10 % airing porosity was found for the treatments evaluated, and value for water content where soil aeration is critical (theta(PA)) was found above estimated water content at field capacity (theta(FC)) for all densities. Critical soil bulk density was of 1.36 and 1.43 Mg m(-3) for NP and CT, respectively. The LLWR in the no-tillage systems was limited in the upper part by the theta(FC), and in the bottom part, by the water content from which soil resistance to penetration is limiting (theta(PR)). By means of LLWR it was observed that the soil presented good physical quality.

Crop type influences soil aggregation and organic matter under no-tillage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade física de um Latossolo Vermelho submetido a sistemas de manejo avaliado pelo Índice S

O monitoramento da qualidade do solo pelos atributos físicos é importante para a avaliação e manutenção da sustentabilidade dos sistemas agrícolas. Um atributo indicador da qualidade do solo deve ser sensível às variações do manejo ao qual está sendo submetido. Este estudo teve como objetivo avaliar o parâmetro S como indicador da qualidade física do solo e a agregação de um Latossolo Vermelho distrófico, submetido a sistemas de manejo sem ou com a inclusão de plantas de cobertura em pré-safra durante 11 anos. Os tratamentos foram: sistema convencional (SC) e sistemas conservacionistas compostos por plantas de cobertura, crotalária (SDC), milheto (SDM) e lablabe (SDL). O delineamento experimental foi o de blocos casualizados, com quatro tratamentos e seis repetições; as camadas constituíram-se nas parcelas subdivididas. Os sistemas conservacionistas SDC, SDM e SDL apresentaram maior teor de matéria orgânica em relação ao SC nas camadas de 0 a 0,05 m. Maiores valores de diâmetro médio ponderado e geométrico dos agregados foram observados nos sistemas conservacionistas. O solo apresentou boa qualidade física determinada pelo índice S, com valores todos superiores a 0,035.

Atributos físicos do solo e produtividade de milho em resposta a culturas de pré-safra

O objetivo deste trabalho foi avaliar os atributos físicos de um Latossolo Vermelho distrófico argiloso e a produtividade de milho em sistemas de manejo que incluem plantas de cobertura cultivadas em pré-safra (setembro a novembro). Foram utilizadas, durante quatro anos, as seguintes plantas de cobertura: crotalária (Crotalaria juncea); milheto (Pennisetum americanum sin. tiphoydes); lab-lab (Dolichus lablab) em sistema de semeadura direta; e pousio cultivado em sistema de preparo convencional, antecedendo o cultivo de milho. O delineamento experimental foi de blocos ao acaso com parcelas subdivididas e quatro repetições. Amostras de solo indeformadas foram coletadas para determinações físicas e avaliou-se a produtividade de milho em área de 22,5 m². As plantas de cobertura no sistema de semeadura direta promoveram maior estabilidade de agregados e maior densidade do solo na camada superficial, sem alteração do conteúdo de água disponível às plantas. A utilização de lab-lab, em pré-safra, promoveu a menor produtividade de milho. A utilização de plantas de cobertura em pré-safra no sistema de semeadura direta de milho é viável no Estado de São Paulo.

A Produção mais Limpa como ferramenta em busca da sustentabilidade empresarial: um estudo de múltiplos casos em empresas do Estado do Rio Grande do Norte

This study aimed to assess the Cleaner Production CP as corporate sustainable tool, through the multiple case studies within companies from Rio Grande do Norte State. In order to achieve this goal a research methodology approach was set. The initial stage of the research methodology was based on a literature review on which it was observed that the CP can be linked with corporate sustainable once it prevents pollution and reduces the operational risks among employees, community and environment. In addition, CP can useful for companies position within competitive position as well as being applied to process, products and services. In order to observe these factors, CP was used within food industry (Company 1), textile industry (Company 2) and in a car dealer (Company 3). Regarding the results, Company 1 changed its raw material as well as implementing housekeeping (control use of water, energy and condensed milk). In Company 2, it was observed the three levels of CP. In other words, housekeeping (e.g. cutting process and manipulation of chemical products), changing technology (high pressure washing machine) and internal and external recycling. In addition, Company 3 considered only level 3 external recycling. As consequence, it was observed that can be applied either within industry as well as service sector. Unfortunately, it was not possible to observe any social gains on a monetary basis. This is due to limitations of the CP methodology and study complexity. Therefore, it was observed improvements regarding to social, environmental and economic areas. Nevertheless, it is necessary more commitment from top level management in order to consider CP like effective sustainable tool

Aplicação da metodologia seis sigma em uma empresa de médio porte do setor têxtil

The Six Sigma methodology has received considerable attention in the last two decades. This is due to its great potencial to reduce processes variability, through the use of accurate data, facts and statistical techniques. The methodology seeks to improve the quality of products and services, maximizing the company s financial performance. Specifically, its implementation and results in medium-sized textile enterprises is unknow, although there are signs that the methodology can be applied with success. Considering this scenario, the goal of this research is to describe the application of the Six Sigma methodology in a médium-sized textile company specialized in the production of male shirts in the satate of Rio Grande do Norte, Brazil. First, we present a literature review, seeking to highlight the themes of quality, Six Sigma and its methodology for improvement. Then, we show the implementation of the project selected, depicting the steps and procedures that must be performed. The results confirm the efficiency of Six Sigma in providing significant gains to companies. It is observed substantial improvements in the speed of product development and the flexibility of the parts produced, reducing the process lead time from 12.5 to 6.2 days, which means a performance improvement of over 50%. This leads also to cultural and behaviour change, creating motivation for implementation of new projects and a continuous search for knowledge

Desenvolvimento de circuitos planares sobre substratos têxteis

The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results

Caracterização do efluente líquido no processo de beneficiamento do índigo têxtil

The great diversity of the textile industries activities causes the formation of wastewaters with high complex characteristics during the productive process, according to the industrial process used. The principal aim of the present work is the characterization of the wastewater from the textile industry that process the indigo, located in the Industrial District of Natal-RN, to know the contaminante load of each stage of the process and the framing of the wastewater with the standards of act of receiving of the System of Treatment of Wastewater of the Industrial District of Natal-RN SITEL-DIN, operated for the Company of Waters and Sewers of the RN CAERN. It was analyzed the following properties and pollutants agents: temperature; pH; alcalinity; color; COD (Chemical Oxygen Demand); total and suspended solids; heavy metals, thermotolerants coliformes, turbidity, dissolved oxygen and electrical conductivity. As conclusion it is distinguished that the wastewater did not get resulted satisfactory, according to comparisons with other sources, in only three parameters: turbidity, dissolved oxygen and electrical conductivity, however none of these parameters is criteria of acts of receiving of the SITEL-DIN,therefore the wastewater if finds inside of normality. After the analysis of the obtained results it was verified that SITEL-DIN is indispensable for completing the wastewater treatment

Soil water retention and s index after crop rotation and chiseling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fabricação de malha de trama utilizada como pré-formas na indústria de compósitos e avaliação das propriedades mecânicas

In the manufacture of composite, textile materials are being used as reinforcement. Generally, the combination of the matrix with the textile material in the form of fibres or yarns is used depending on their distribution in the web. In the present work, in place of fibres or yarns, a knitted structure in the form of the final product which is defined as preform. The preform is weft knit manufactured with polyester filaments. In the manufacture of composite, polyester resin was used as matrix. The physical and mechanical properties as well as the formability of the weft knit were analysed. The physical and mechanical properties as well as the formability of the knitted structure were analysed. The results obtained on the analysis show that the courses and wales of the weft knit structure and the tensile properties help the formability of the structure and the impregnation of the resin. It could be clearly observed that composite structure in the direction of the courses support more tension than in the direction of the wales. In relation to the three points flexural tests it was possible to note that there was more flexion in the direction of wales, what was expected. It was also possible to note that there are other advantages such as reduction in the loss of materials used, homogeneity in the distribution of the knitted structure in the mould, reduction in the preparation time and also in the reduction in the cost of manufacture

Least limiting water range in soil under crop rotations and chiseling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise tribológica das malhas multifuncionais obtidas por multicamadas

The present work consists in the analysis of tribologycal properties of basic and multifunctional knitted fabrics. This knowledge has fundamental importance for the textile industry since it can quantify, in an objective way, the tactil. The fabrics used were characterized by friction and mechanical tests for determining the viscoelastic region, wear resistance and friction coefficient of the fabrics used. The stress-strain curve was obtained by the method Kawabata, KES-FB1. Wear tests performed with the aid of equipment Martindale. The measurement of friction coefficient, two methods were used and analyzed comparatively. The first was a method already established worldwide known as KES-FB4 and the second was an innovative method called FRICTORQ, developed by the University of Minho. These two methods were compared taking into account the relative motion between the tribologycal pairs are different from each method. While the first motion is translational, the second is rotational. It was formal that the knitted had a multifunctional fabrics tribologycal performance which was better than the basic knitted fabrics, as the viscoelastic region, was laager highlighting a multifunctional structure, with greater wear resistance mainly on the back side of the knitted fabrics and lower friction coefficient. Performing a comparative analysis between two methods used to measure the friction coefficient, it was formal that both methods were consistent in terms of results. In operational terms, the FRICTORQ showed ease of operation and increased reproducibility of results