Association between pharyngeal residue and posterior oral spillage with penetration and aspiration in Stroke

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalência da baixa densidade mineral óssea em mulheres na pós-menopausa tratadas de câncer de mama

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Blood clot stabilization on root dentin conditioned by the combination of tetracycline and EDTA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento das habilidade de auto-cuidado em crianças com atraso neuropsicomotor

Introduction: The neuropsicomotor development could be negatively affected by several factors occurred in the pre, peri and pos natal period. The early stimulation is implemented by a set of dynamic activities which aim the child development according to the child’s phase. Objective: The purpose of this study was to analyze the functional skills acquisition in the self care area in children with development delay. Participated of this study 9 caregiver of children aged of 0 to 3 years with delay neuropsicomotor. Method: For the data collect was used the self-care area of the Pediatric Evaluation of Disability Inventory (PEDI) in the version adapted for Brazil. The data collect was performed in two different stages, with an interval of 6 months between the collects. The raw score were transformed in continuous score by the Rasch statistics, then was applied the Shapiro-Wilk and t-student test. Results: The participants obtained a signifi cant higher score in the second stage than in the fi rst (p<0,01). Conclusion: The results of the present study suggests that the early stimulation could be an important intervention in the process of self-care skills acquisition in children with neuropsicomotor delay.

Avaliação da atenção concentrada e memória em tabagistas com baixa carga tabágica

Introduction: Smoking is considered by World Health Organisation (WHO) a disease, since nicotine is addictive and cause physical, emotional and behavioral disorders in people who smoke. The objective of this study was to evaluate the concentrated attention and memory in smokers and nonsmokers, and the influence of one cigarette in this variables. Material and Methods: We selected two groups of subjects between 18 and 25 years, with no history of acute or chronic respiratory disease. Group 1 (G1) consist of 40 nonsmoking individuals and group 2 (G2) 40 smokers (who smoked less than 20 cigarettes per day, for up to 10 years). The subjects were tested for concentrated attention and memory test (AC Test), nonsmokers performed the test once, smokers performed the test twice, before smoking and after five minutes after smoking one cigarette. Smokers stayed without cigarret for one our before the first test. Results: Comparing the tests nonsmokers versus smokers first test, there was no significant difference (p> 0.05), however, the analysis of the two trials of smokers, showed improvement in concentrated attention and memory after smoke (p <0.0001). Conclusions: There was no difference in Concentrated Attention and Memory among nonsmokers and smokers in abstinence, however smokers showed significant improvement in AC Test after smoking.

Knowledge and practice of women regarding cervical cancer in a primary health care unit

Objectives: evaluating the level of information about the examination of uterine cervical cancer and its association with sociodemographic variables in women of a health care unit in the city of Bauru, São Paulo, Brazil. Methods: we conducted a cross-sectional descriptive study with 370 women aged 25 to 59, through structured interviews in their own homes; we used descriptive statistics and the χ2 test. Results: 40.5% of the women had not undergone the Papanicolaou test at the recommended frequency; 58.2% incorrectly defined the test, and 69.5% did not know about the risk factors for the development of cervical cancer; the knowledge about the test showed statistically significant association with schooling and family income of the studied population. Conclusions: women present deficiencies on the proper practice of the Papanicolaou test, on knowledge about the test, risk factors and prevention methods. Therefore, it is necessary to develop primary health actions for the most vulnerable population.

Bonding of facial silicon with nanoparticles to an acrylic resin substrate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of polymers and ceramics in new and discarded electrical insulators: reuse and recycling possibilities

The expansion and maintenance of electricity distribution networks generates large amounts of waste, much of it in the form of discarded insulators that are not reused or recycled. This paper describes the results of tests on used and new ceramic and polymeric insulators to verify if their exposure to weathering justifies their replacement. In new and used ceramic insulators, properties such as contact angle, relative density, porosimetry, dilatometry and X-ray diffraction patterns showed no differences or the differences that were found could not be related to their use. The discarded ceramic material showed high thermal stability, an interesting characteristic for application as chamotte. It can also be reused to replace gravel used in substations. In polymeric insulators, thermogravimetry, differential scanning calorimetry and relative density test results suggest degradation of used material compared to new. This would justify their replacement and discard as waste, but they show little recycling potential.

Volumetric microleakage assessment of glass-ionomer-resin composite hybrid materials

Objective: This study was intended to quantify the marginal leakage of three glass-ionomer-resin composite hybrid materials and compare it with the leakage exhibited by a glass-ionomer cement and a bonded resin composite system. Method and materials: Standardized Class V cavities were prepared on root surfaces of 105 extracted human teeth, randomly assigned to five groups of 21 each, and restored with either Ketac-Fil Aplicap, Z100/Scotchbond Multi-Purpose Plus, Vitremer, Photac-Fil Aplicap, or Dyract. The teeth were thermally stressed for 500 cycles and stained with methylene blue. The microleakage was quantified spectrophotometrically, and the data were statistically analyzed with Friedman's test. Results: There were no significant differences in microleakage among the five groups. Restorations of all tested materials showed some marginal leakage in Class V cavities. Conclusion: The microleakage performance of glass-ionomer-resin composite hybrid materials was similar to those of a conventional glass-ionomer and a bonded resin composite system.

Avaliação da toxicidade da vinhaça utilizando Oreochromis niloticus (Perciformes: Cichlidae) como organismo teste

Contamination of rivers and lakes, waste disposed by infiltration into the soil as fertilizer, for example, has been highlighted around the world, since such compounds can contain toxic elements, causing changes in aquatic and/or terrestrial ecosystem. Due to the possible presence of these elements in these wastes, it is possible assess damage to organisms exposed through breaks in genetic material and mutations. In this sense, this work aimed at exploring the cytotoxic, mutagenic and genotoxic vinasse pontential, residue used as fertilizer, from the processing of sugar cane into alcohol, using fish (Oreochromis niloticus - Cichlidae) as a test organism. The individuals were exposed to different dilutions of vinasse in the water and later carried out analysis of their erythrocytes using the micronucleus test and nuclear abnormalities associated and the comet assay. In the first bioassay, tilapia exhibited 5% and 10% vinasse concentrations died after 48h. The number of micronucleated erythrocytes was statistically significant for the 1% vinasse concentration and also for nuclear abnormalities such as broken-egg and nuclear bud, when compared with negative and positive controls; were also significant lobed type erythrocytes, when compared to the negative control. The test results of the comet assay were not significant for 1% vinasse when compared to the negative control, due to the high rate of comets with damage control, which is unusual. The same was observed for changes as notched and blebbed type. In the second chemical analyzes conducted, the detection of heavy metals in the vinasse sample, charged only the presence of copper and chromium, the latter with a concentration 89 times higher than in the first test. Differentially the first bioassay, fish exposed to dilution of 5% did not die... (Complete abstract click electronic access below)

Metodologia de determinação das curvas de probabilidade de falha S-N-P para uma liga de aluminio submetida a diferentes tratamentos termicos de solubilização e precipitação

The approach of the subject matter in this work relies on the fact that the reliability of methods for performance analysis of materials proves critical for the result. This work focused on the development and presentation of the methodology for lifting probability curves for fatigue test (SN) according to standard E739, this focus is justified by the fact that the results in fatigue test show considerable dispersion making it difficult to reading and interpretation of data, this dispersion arises because the phenomenon of rupture is strongly influenced by internal characteristics of the material, we can then have much data ranging from test to test. Thus we set out originally for a brief study of aluminum alloys in question, as well as the treatments to which they were subjected. We also studied the behavior of materials when subjected to cyclic loading, which configures process of fatigue failure, and even fatigue test method in question. This statistical analysis is based on the ASTM E739 standard, so its contents was studied in detail so that we could present in detail the methodology and raise SN curves for different aluminum alloy 7012 subjected to fatigue test. Data were collected from tests conducted in the department of materials from two samples of aluminum alloy 7012 solubilized and precipitated by different time intervals and assayed temperature fatigue-type traction-compression, these data were then analyzed and used to survey curves using the base as E739. After lifting the curve analyzed the characteristics of the test samples and their correlation with the test results. We confirmed the effectiveness of the method of statistical analysis by ASME E739, which allowed the reading of data without this method would be very difficult to have a reading and comparison of the results for the two types... (Complete abstract click electronic access below)

Análise estatística da vida em fadiga de compósitos estruturais pela distribuição de Weibull

Nowadays technological trend is based on finding materials that could support low weight with satisfactory mechanical properties and for this reason composite material became a very attractive topic in research projects all over the world. Due to its heterogenic properties, this type of material shows scatter in mechanical test results, especially in cyclic loading. Therefore it is important to predict its fatigue strength behaviour by statistic analysis, once fatigue causes approximately 90% of the failure in structural components. The present work aimed to investigate the fatigue behaviour of the Twill/Cycom 890 composite, which is carbon fiber reinforced with polymeric resin as matrix and manufactured via RTM process (Resin Transfer Molding). All samples were tested in different tensile level in triplicate in order to associate these values. The statistical analysis was conducted with Two-Parameter Weibull Distribution and then evaluated the fatigue life results for the composite. Weibull graphics were used to determine the scale and shape parameters. The S-N curve for the Twill/Cycom composite was drawn and indicated the number of cycles to occur the first damages in this material. The probability of failure was associated with material reliability, as shown in graphics for the different tensile levels and fatigue life. In addition, the laminate was evaluated by ultrasonic inspection showing a regular impregnation. The fractographic analysis conducted by SEM showed failure mechanisms for polymeric composites associated to cyclic loadings ... (Complete abstract click electronic access below)

Análise do comportamento em fadiga de rodas ferroviárias fabricadas pelos processos de forjamento e fundição

Since the beginning of the railway industry until today, rail wheels are important components to the good working of a railway. For being a critical security item, design and maintenance are done with extremely care to avoid failures. Despite de fact of railway components be projected to support a big number of cyclic solicitation during its life, some accidents still occur. These accidents, despite the low frequency, always have great consequences, drawing in great financial, material, and people losses. Nowadays, railway component failure is relatively low, because it’s been projected to work below the materials Fatigue Resistance Limit, however, with the growing demand of faster trains and higher load for each axle, the occurrence probability is even bigger. This work includes a comparative study of two fabrication processes (casting and forging) applied in the production of rail wheels where it was measured the mechanical properties of traction and fatigue. The study also verified through microstructural analysis, hardness, traction and fatigue tests, statistical analysis of fatigue test results and fractographic analysis that forging process lead to better correlations between fatigue life and mechanical properties, providing more security in railroads, less wagon retention caused by corrective maintenance and smaller operational cost with its use

Revestimento interno de tubulação por um processo de centrifugação utilizando resina éster-vinílica com adição de cargas

Being the corrosion one of the great problems facing the industry today, specifically the internal corrosion of pipes in chemical and petrochemical industries, hence this work proposes a new type of internal coating in order to avoid fouling and decrease the pressure loss in the flow. For this, we use a composition of vinyl ester resins and manometric loads, which after cleaning and preparation of the internal surface of the tube will be applied through a process of centrifugation, adjusted by a lathe. After curing the resin, a test of roughness will be realized in order to analyze the reduction of friction factor and thus be able to conclude whether there was a significant decrease in pressure drop. With test results in hand, we hope to obtain a coating that meets most of the properties required by the industry and to provide a reduction in operating costs and a visible improvement in the conditions of use of the pipe

Interactive simulations to physics teaching: a case study in brazilian high school

This paper presents the results of a study that investigated the use of simulators to improve physics teaching. The study population consisted of eight classes totaling 205 second year high school students from Brazilian public school. The research methodology adopted compares the average performance of students on tests conducted in the classroom to performance on tests conducted in the laboratory using computer simulators. The results obtained showed that students’ performance on tests improved after the use of simulators. It was found that the students had more homogeneous test results when using the simulator.