Marine Fisheries Stock Assessment Improvement Plan: report of the National Marine Fisheries Service National Task Force for Improving Fish Stock Assessments

This report argues for greatly increased resources in terms of data collection facilities and staff to collect, process, and analyze the data, and to communicate the results, in order for NMFS to fulfill its mandate to conserve and manage marine resources. In fact, the authors of this report had great difficulty defining the "ideal" situation to which fisheries stock assessments and management should aspire. One of the primary objectives of fisheries management is to develop sustainable harvest policies that minimize the risks of overfishing both target species and associated species. This can be achieved in a wide spectrum of ways, ranging between the following two extremes. The first is to implement only simple management measures with correspondingly simple assessment demands, which will usually mean setting fishing mortality targets at relatively low levels in order to reduce the risk of unknowingly overfishing or driving ecosystems towards undesirable system states. The second is to expand existing data collection and analysis programs to provide an adequate knowledge base that can support higher fishing mortality targets while still ensuring low risk to target and associated species and ecosystems. However, defining "adequate" is difficult, especially when scientists have not even identified all marine species, and information on catches, abundances, and life histories of many target species, and most associated species, is sparse. Increasing calls from the public, stakeholders, and the scientific community to implement ecosystem-based stock assessment and management make it even more difficult to define "adequate," especially when "ecosystem-based management" is itself not well-defined. In attempting to describe the data collection and assessment needs for the latter, the authors took a pragmatic approach, rather than trying to estimate the resources required to develop a knowledge base about the fine-scale detailed distributions, abundances, and associations of all marine species. Thus, the specified resource requirements will not meet the expectations of some stakeholders. In addition, the Stock Assessment Improvement Plan is designed to be complementary to other related plans, and therefore does not duplicate the resource requirements detailed in those plans, except as otherwise noted.

Morphometric studies in Penaeus merguiensis from Ratnagiri waters for selection of the brood stock in genetic improvement programmes

Studies on genetic improvement of penaeid prawns for the character higher tail weight using methods of selective breeding were undertaken. Prior to the actual breeding experiments it was necessary to find out the quantum of available variability in the character tail weight amongst the natural populations of Penaeus merguiensis from the Indian waters. Thirteen morphometric variables were measured and various statistical analyses were carried out. The tail weight showed almost double values of coefficient of variation in the females than the males (C.V. 20.37 and 11.08 respectively). The combination of the characters viz. sixth segment length (SSL), sixth segment depth (SSD) and posterior abdominal circumference (PAC) gave the highest R super(2) values. These variables were easy to measure and gave maximum variation in the character tail weight without sacrificing the breeders in the brood stock. The quantitative character tail weight was influenced by both genetic and environmental factors was statistically ascertained by applying 2-Factor analysis.

Ground improvement methods for liquefaction remediation

Soil liquefaction continues to be a major source of damage to buildings and infrastructure after major earthquake events. Ground improvement methods are widely used at many sites worldwide as a way of mitigating liquefaction damage. The relative success of these ground improvement methods in preventing damage after a liquefaction event and the mechanisms by which they can mitigate liquefaction continue to be areas of active research. In this paper the emphasis is on the use of dynamic centrifuge modelling as a tool to investigate the effectiveness of ground improvement methods in mitigating liquefaction risk. Three different ground improvement methods will be considered. First, the effectiveness of in situ densification as a liquefaction resistance measure will be investigated. It will be shown that the mechanism by which soil densification offers mitigation of the liquefaction risk can be studied at a fundamental level using dynamic centrifuge modelling. Second, the use of drains to relieve excess pore pressures generated during an earthquake event will be considered. It will be shown that current design methods can be further improved by incorporating the understanding obtained from dynamic centrifuge tests. Finally, the use of soil grouting to mitigate liquefaction risk will be investigated. It will be shown that by grouting the foundation soil, the settlement of a building can be reduced following earthquake loading. However, the grouting depth must extend the whole depth of the liquefiable layer to achieve this reduction in settlements.

Electric conduction improvement of well-structured multi-walled carbon nanotubes

We characterized the electrical conductance of well-structured multi-walled carbon nanotubes (MWCNTs) which had post-treated by a rapid vacuum arc thermal annealing process and structure defects in these nanotubes are removed. We found that the after rapid vacuum arc annealing, the conductivity of well-structured MWCNTs can be improved by an order of magnitude. We also investigated the conductivity of MWCNTs bundle by the variation of temperatures. These results show that the conductance of annealed defect-free MWCNTs is sensitive to temperature imply the phonon scatting dominated the electron conductions. Compare to the well-structured MWCNTs, the defect scattering dominated the electron conduction in the as-grown control sample which has large amount of structure defects. A detail measurement of electron conduction from an individual well-structured MWCNT shows that the conductivity increases with temperatures which imply such MWCNTs exhibited semiconductor properties. We also produced back-gated field-effect transistors using these MWCNTs. It shows that the well-structured MWCNT can act as p-type semiconductor. © 2010 IEEE.

The influence of injection conditions and soil types on soil improvement by microbial functions

Research has begun on Microbial Carbonate Precipitation (MCP), which shows promise as a soil improvement method because of its low carbon dioxide emission compared to cement stabilized agents. MCP produces calcium carbonate from carbonates and calcium in soil voids through ureolysis by "Bacillus Pasteurii". This study focuses on how the amount of calcium carbonate precipitation is affected by the injection conditions of the microorganism and nutrient salt, such as the number of injections and the soil type. Experiments were conducted to simulate soil improvement by bio-grouting soil in a syringe. The results indicate that the amount of precipitation is affected by injection conditions and soil type, suggesting that, in order for soil improvement by MCP to be effective, it is necessary to set injection conditions that are in accordance with the soil conditions. © 2011 ASCE.

Management of euglenophytes in aquaculture ponds for improvement of fish production

Four experiments each with three replications were conducted in 12 experimental ponds to control the euglenophytes bloom viz. treatment 1 (T1, covering of one third of the water surface by duckweed (Lemna minor); treatment 2 (T2), application of 123.5 kg lime/ha/month; treatment 3 (T3), use of both duckweed as in T1 and lime as in T2; treatment 4 (T4) was considered as control where neither duckweed nor lime was applied. Fishes comprising of rohu (Labeo rohita), catla (Catla catla), mrigal ( Cirrhinus cirrhosus), silver carp (Hypophthalmichthys molitrix) and silver barb (Barbonymus gonionotus) were stocked at the rate of 1080 fishes/ha with the species ratio of 8:4:6:9:13, respectively. The lowest cell density of euglenophytes was found in the ponds of T3 followed by T2, and T1. In the ponds of T3, euglenophytes bloom did not occur possibly due to alkaline pH, shade and nutrient absorption by duckweed. Thin bloom was observed in the ponds of T1 where pH was neutral or slightly alkaline. The grazing on euglenophytes by the silver carp and silver barb also had some contribution in controlling the bloom. Growth of fishes was comparatively higher in the ponds of T3 and T1, which might be due to better water quality and availability of adequate food while the lower fish growth as recorded from the ponds of T4 might be due to euglenophytes bloom. Thick bloom inhibited light penetration which hampered photosynthesis and growth of other phytoplankton that are the preferred food of planktivorous fishes. Mortality of fishes in ponds having euglenophytes bloom was possibly due to formation of anoxic situation in the early morning or due to the combined effect of anoxic situation and toxic metabolites secretion by the euglenophytes.