Phenotypic and molecular characterization of antimicrobial resistance and virulence factors in Pseudomonas aeruginosa clinical isolates from Recife, State of Pernambuco, Brazil

INTRODUCTION: The emergence of carbapenem resistance mechanisms in Pseudomonas aeruginosa has been outstanding due to the wide spectrum of antimicrobial degradation of these bacteria, reducing of therapeutic options. METHODS: Sixty-one clinical strains of P. aeruginosa isolated from five public hospitals in Recife, Pernambuco, Brazil, were examined between 2006 and 2010, aiming of evaluating the profiles of virulence, resistance to antimicrobials, presence of metallo-β-lactamase (MBL) genes, and clonal relationship among isolates. RESULTS: A high percentage of virulence factors (34.4% mucoid colonies; 70.5% pyocyanin; 93.4% gelatinase positives; and 72.1% hemolysin positive) and a high percentage of antimicrobial resistance rates (4.9% pan-resistant and 54.1% multi-drug resistant isolates) were observed. Among the 29 isolates resistant to imipenem and/or ceftazidime, 44.8% (13/29) were MBL producers by phenotypic evaluation, and of these, 46.2% (6/13) were positive for the blaSPM-1 gene. The blaIMP and blaVIM genes were not detected. The molecular typing revealed 21 molecular profiles of which seven were detected in distinct hospitals and periods. Among the six positive blaSPM-1 isolates, three presented the same clonal profile and were from the same hospital, whereas the other three presented different clonal profiles. CONCLUSIONS: These results revealed that P. aeruginosa is able to accumulate different resistance and virulence factors, making the treatment of infections difficult. The identification of blaSPM-1 genes and the dissemination of clones in different hospitals, indicate the need for stricter application of infection control measures in hospitals in Recife, Brazil, aiming at reducing costs and damages caused by P. aeruginosa infections.

Experimental characterization of an earth eco-efficient plastering mortar

Earthen plastering mortars are becoming recognized as highly eco-efficient. The assessment of their technical properties needs to be standardized but only the German standard DIN 18947 exists for the moment. An extended experimental campaign was developed in order to assess multiple properties of a ready-mixed earth plastering mortar and also to increase scientific knowledge of the influence of test procedures on those properties. The experimental campaign showed that some aspects related to the equipment, type of samples and sample preparation can be very important, while others seemed to have less influence on the results and the classification of mortars. It also showed that some complementary tests can easily be performed and considered together with the standardized ones, while others may need to be improved. The plaster satisfied the requirements of the existing German standard but, most importantly, it seemed adequate for application as rehabilitation plaster on historic and modern masonry buildings. Apart from their aesthetic aspect, the contribution of earthen plasters to eco-efficiency and particularly to hygrometric indoor comfort should be highlighted.

Molecular and biological characterization of Trypanosoma cruzi strains isolated from children from Jequitinhonha Valley, State of Minas Gerais, Brazil

Introduction The biological diversity of Trypanosoma cruzi strains plays an important role in the clinical and epidemiological features of Chagas disease. Methods Eight T. cruzi strains isolated from children living in a Chagas disease vector-controlled area of Jequitinhonha Valley, State of Minas Gerais, Brazil, were genetically and biologically characterized. Results The characterizations demonstrated that all of the strains belonged to T. cruzi II, and showed high infectivity and a variable mean maximum peak of parasitemia. Six strains displayed low parasitemia, and two displayed moderate parasitemia. Later peaks of parasitemia and a predominance of intermediate and large trypomastigotes in all T. cruzi strains were observed. The mean pre-patent period was relatively short (4.2±0.25 to 13.7±3.08 days), whereas the patent period ranged from 3.3±1.08 to 34.5±3.52 days. Mortality was observed only in animals infected with strain 806 (62.5%). Histopathological analysis of the heart showed that strains 501 and 806 caused inflammation, but fibrosis was observed only in animals infected with strain 806. Conclusions The results indicate the presence of an association between the biological behavior in mice and the genetic characteristics of the parasites. The study also confirmed general data from Brazil where T. cruzi II lineage is the most prevalent in the domiciliary cycle and generally has low virulence, with some strains capable of inducing inflammatory processes and fibrosis.

Flood resilient housing recovery models: a theoretical case study in Maldives

Natural disasters are events that cause general and widespread destruction of the built environment and are becoming increasingly recurrent. They are a product of vulnerability and community exposure to natural hazards, generating a multitude of social, economic and cultural issues of which the loss of housing and the subsequent need for shelter is one of its major consequences. Nowadays, numerous factors contribute to increased vulnerability and exposure to natural disasters such as climate change with its impacts felt across the globe and which is currently seen as a worldwide threat to the built environment. The abandonment of disaster-affected areas can also push populations to regions where natural hazards are felt more severely. Although several actors in the post-disaster scenario provide for shelter needs and recovery programs, housing is often inadequate and unable to resist the effects of future natural hazards. Resilient housing is commonly not addressed due to the urgency in sheltering affected populations. However, by neglecting risks of exposure in construction, houses become vulnerable and are likely to be damaged or destroyed in future natural hazard events. That being said it becomes fundamental to include resilience criteria, when it comes to housing, which in turn will allow new houses to better withstand the passage of time and natural disasters, in the safest way possible. This master thesis is intended to provide guiding principles to take towards housing recovery after natural disasters, particularly in the form of flood resilient construction, considering floods are responsible for the largest number of natural disasters. To this purpose, the main structures that house affected populations were identified and analyzed in depth. After assessing the risks and damages that flood events can cause in housing, a methodology was proposed for flood resilient housing models, in which there were identified key criteria that housing should meet. The same methodology is based in the US Federal Emergency Management Agency requirements and recommendations in accordance to specific flood zones. Finally, a case study in Maldives – one of the most vulnerable countries to sea level rise resulting from climate change – has been analyzed in light of housing recovery in a post-disaster induced scenario. This analysis was carried out by using the proposed methodology with the intent of assessing the resilience of the newly built housing to floods in the aftermath of the 2004 Indian Ocean Tsunami.

Molecular characterization of Candida spp. isolates from patients with bloodstream infections

Introduction The aim of this study was to conduct an epidemiological study comparing the genetic similarity of yeasts isolated from blood cultures. Methods Random amplification of polymorphic DNA (RAPD) techniques were used for the Candida samples obtained from patients at the Hospital Universitário da Universidade Federal do Mato Grosso do Sul (HU/UFMS) in Campo Grande, state of Mato Grosso do Sul, Brazil, from 1998-2000. Results The most frequently isolated species was Candida albicans (45.8%). DNA amplification from genomic yeast isolates indicated a genetic similarity of over 90%. Conclusions The RAPD profiles obtained were able to differentiate between the isolated Candida species, thereby suggesting that the method might be useful in epidemiological studies.

Characterization of an OPCPA laser amplifier based on the nonlinear crystal YCOB

The work described in this thesis was performed at the Laboratory for Intense Lasers (L2I) of Instituto Superior Técnico, University of Lisbon (IST-UL). Its main contribution consists in the feasibility study of the broadband dispersive stages for an optical parametric chirped pulse amplifier based on the nonlinear crystal yttrium calcium oxi-borate (YCOB). In particular, the main goal of this work consisted in the characterization and implementation of the several optical devices involved in pulse expansion and compression of the amplified pulses to durations of the order of a few optical cycles (20 fs). This type of laser systems find application in fields such as medicine, telecommunications and machining, which require high energy, ultrashort (sub-100 fs) pulses. The main challenges consisted in the preliminary study of the performance of the broadband amplifier, which is essential for successfully handling pulses with bandwidths exceeding 100 nm when amplified from the μJ to 20 mJ per pulse. In general, the control, manipulation and characterization of optical phenomena on the scale of a few tens of fs and powers that can reach the PW level are extremely difficult and challenging due to the complexity of the phenomena of radiation-matter interaction and their nonlinearities, observed at this time scale and power level. For this purpose the main dispersive components were characterized in detail, specifically addressing the demonstration of pulse expansion and compression. The tested bandwidths are narrower than the final ones, in order to confirm the parameters of these elements and predict the performance for the broadband pulses. The work performed led to additional tasks such as a detailed characterization of laser oscillator seeding the laser chain and the detection and cancelling of additional sources of dispersion.

Molecular characterization of Torque teno virus and SEN virus co-infection with HIV in patients from Southern Iran

Introduction Torque teno virus (TTV) and SEN virus are circular single-stranded DNA viruses that cause blood-borne infections. The SEN virus (SEN-V) was originally detected in the serum of an injection drug user infected with human immunodeficiency virus (HIV). Recently TTV was discovered as a potential causative agent of non-A-E hepatitis. The aim of this study was to investigate the prevalence of the SEN-V-D/H and TTV in HIV patients and healthy blood donors in Iran. Methods One hundred and fifty HIV patients with a mean age of 50.46 ± 18.46 years and 150 healthy blood donors with a mean age of 48.16 ± 13.73 years were included in this study. TTV and SEN-V were detected by the PCR and were quantitatively assayed by competitive PCR (nested and semi-nested PCR). Restriction fragment length polymorphisms (RFLPs) were used to determine the heterogeneity of TTV. Results TTV and SEN-V were detected 96 (64%) and 84 (56%) of 150 HIV patients respectively. These rates were 34% (n=51) and 37.33% (n=56) in healthy blood donors (significant, p<0.05). PCR detected SEN-V/TTV DNA from 32 of the healthy blood donors (21.33%), while 65 (43.33%) of HIV patients were positive for SEN-V/TTV DNA. Of 150 HIV patients, 32.66% and 23.33% were positive for SEN-V-H and SEN-V-D, respectively and 18.66% (n=28) were co-infected with SEN-V-D/H. Conclusions The prevalence of SEN-VD/H and TTV is higher in HIV patients than in healthy blood donors in Southern Iran. Our results suggest that TTV and SEN-V might play a role in the development of liver disease in patients with immunodeficiency diseases.

Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.

Deltamethrin pyrethroid susceptibility characterization of Triatoma sordida Stål, 1859 (Hemiptera: Reduviidae) populations in the Northern Region of Minas Gerais, Brazil

Introduction Triatoma sordida is the most captured Triatomine species in the Brazilian artificial environment. In 2008, the discovery of three Triatomine populations with altered susceptibilities to deltamethrin highlighted the importance of investigating the genetic potential for resistance in triatomines. The purpose of this study was to characterize the susceptibility to deltamethrin of peridomestic T. sordida populations in Minas Gerais, Brazil. Methods A susceptibility reference lineage derived from Uberaba, Minas Gerais, Brazil was used. Serial dilutions of deltamethrin were prepared and applied to the dorsal abdomen of first instar nymphs. The control group received only pure acetone. Mortality was evaluated after 72h. Qualitative tests assessed mortality in response to a diagnostic dose of 1xLD99 of the susceptibility reference lineage. Results Susceptibility profile characterization of T. sordida populations revealed resistance ratios (RR50s) ranging from 0.42 to 3.94. The percentage mortality in response to the diagnostic dose varied from 70% to 100%. A comparison of the results obtained in the quantitative and qualitative assays demonstrated a lack of correspondence for some populations. Conclusions We demonstrated that only T. sordida populations that present a RR50>1.0 have altered susceptibility, and the execution of simultaneous field and laboratory tests is required to understand the actual effect of vector control. A possible cause of the observed resistance ratios might be the continuous use of pyrethroids in Brazil since the 1980s.

Description of microsporidia in simulids: molecular and morphological characterization of microsporidia in the larvae of Simulium pertinax Kollar (Diptera: Simuliidae)

IntroductionMicrosporidia constitute the most common black fly pathogens, although the species' diversity, seasonal occurrence and transmission mechanisms remain poorly understood. Infections by this agent are often chronic and non-lethal, but they can cause reduced fecundity and decreased longevity. The objective of this study was to identify microsporidia infecting Simulium (Chirostilbia) pertinax (Kollar, 1832) larvae from Caraguatatuba, State of São Paulo, Brazil, by molecular and morphological characterization.MethodsLarvae were collected at a single point in a stream in a rural area of the city and were kept under artificial aeration until analysis. Polydispyrenia spp. infection was characterized by the presence of at least 32 mononuclear spores measuring 6.9 ± 1.0 × 5.0 ± 0.7µm in persistent sporophorous vesicles. Similarly, Amblyospora spp. were characterized by the presence of eight uninucleate spores measuring 4.5 × 3.5µm in sporophorous vesicles.ResultsThe molecular analysis confirmed the presence of microsporidian DNA in the 8 samples (prevalence of 0.51%). Six samples (Brazilian larvae) were related to Polydispyrenia simulii and Caudospora palustris reference sequences but in separate clusters. One sample was clustered with Amblyospora spp. Edhazardia aedis was the positive control taxon.ConclusionsSamples identified as Polydispyrenia spp. and Amblyospora spp. were grouped with P. simulii and Amblyospora spp., respectively, corroborating previous results. However, the 16S gene tree showed a considerable distance between the black fly-infecting Amblyospora spp. and the mosquito-infecting spp. This distance suggests that these two groups are not congeneric. Additional genomic region evaluation is necessary to obtain a coherent phylogeny for this group.

Description and characterization of the melanic morphotype of Rhodnius nasutus Stål, 1859 (Hemiptera: Reduviidae: Triatominae)

IntroductionFor the first time we provide the description of the melanic (dark) morphotype of Rhodnius nasutus and determine the pattern of genetic inheritance for this characteristic.MethodsDark morph R. nasutus specimens were crossbred with standard (typically patterned) R. nasutus.ResultsWe present the first occurrence of the melanic morphotype in the genus Rhodnius. The crossbreeding results demonstrate that the inheritance pattern of this characteristic follows Mendel's simple laws of segregation and an independent assortment of alleles.ConclusionsPhenotypic variation of R. nasutus reinforces the heterogeneity found in the Triatominae. Descriptions of new species in this subfamily require rigorous validation criteria.

Susceptibility characterization of residual Brazilian populations of Triatoma infestans Klug, 1834 (Hemiptera: Reduviidae) to deltamethrin pyrethroid

INTRODUCTION: Despite years of efforts towards the elimination of Triatoma infestans in Brazil, residual foci still persist in some areas of the States of Bahia and Rio Grande do Sul. The persistence of these T. infestans populations in the country has two different origins of equal concern: operational failures or insecticide resistance. Thus, the objective of this study was to characterize the susceptibility profile of the residual Brazilian populations of T. infestans to deltamethrin. METHODS: The susceptibility reference lineage was derived from Cipein/Argentina. The populations studied were manually collected using a dislodging agent in peridomiciles in the States of Bahia (Novo Horizonte) and of Rio Grande do Sul (Santa Rosa and Doutor Maurício Cardoso). Serial dilutions of deltamethrin were prepared and applied at the dorsal abdomen of first instar nymphs. The control group received only pure acetone. Mortality was evaluated after 72h. Qualitative tests assessed the mortality of a diagnostic dose of 1xLD99 (2.76ng a.i./nymph) determined for the susceptibility reference lineage. RESULTS: The susceptibility profile characterization of the T. infestans populations revealed an RR50 ranging from 1.73 to 3.26. The mortality percentage in response to a diagnostic dose was 100%. The results obtained in the quantitative and qualitative assays corresponded for all populations. CONCLUSIONS: The results of this study indicate that the persistence of residual foci of T. infestans in Bahia and Rio Grande do Sul is not related to insecticide resistance but may be associated with operational failures. In Rio Grande do Sul, we must consider the possibility of continuous reinfestation by Argentinian individuals, which justifies active and efficient epidemiological surveillance.

Characterization of a foodborne outbreak caused by Salmonella Enteritidis in Aracaju, State of Sergipe, Brazil

INTRODUCTION: In December 2001, an outbreak of foodborne gastroenteritis infected 114 of 161 people who ate at a restaurant in Aracaju, State of Sergipe, Brazil. METHODS: The epidemiological and microbiological aspects of the outbreak were characterized. RESULTS: Potato salad made with homemade mayonnaise and stored at unsuitable temperatures was associated with increased risk of foodborne infection. Salmonella Enteritidis was isolated from the diarrheal stools of the hospitalized patients, and genotyping of the fecal samples generated identical randomly amplified polymorphic deoxyribonucleic acid (DNA) profiles. CONCLUSIONS : To the best of our knowledge, this is the first and the only record of a gastrointestinal outbreak in Sergipe.

Fabrication and characterization of transparent conductive oxide surface sensors for electrocorticography – TrECoG

Understanding how the brain works has been one of the greatest goals of mankind. This desire fuels the scientific community to pursue novel techniques able to acquire the complex information produced by the brain at any given moment. The Electrocorticography (ECoG) is one of those techniques. By placing conductive electrodes over the dura, or directly over the cortex, and measuring the electric potential variation, one can acquire information regarding the activation of those areas. In this work, transparent ECoGs, (TrECoGs) are fabricated through thin film deposition of the Transparent Conductive Oxides (TCOs) Indium-Zinc-Oxide (IZO) and Gallium-Zinc-Oxide (GZO). Five distinct devices have been fabricated via shadow masking and photolithography. The data acquired and presented in this work validates the TrECoGs fabricated as efficient devices for recording brain activity. The best results were obtained for the GZO- based TrECoG, which presented an average impedance of 36 kΩ at 1 kHz for 500 μm diameter electrodes, a transmittance close to 90% for the visible spectrum and a clear capability to detect brain signal variations. The IZO based devices also presented high transmittance levels (90%), but with higher impedances, which ranged from 40 kΩ to 100 kΩ.

Phenotypic and molecular characterization of CTX-M extended-spectrum beta-lactamase-producing Escherichia coli isolates in Shiraz, Iran

AbstractINTRODUCTIONThe aim of this study was to detect the prevalence of the extended-spectrum beta-lactamase (ESBL)-encoding CTX-M gene in Escherichia coliisolates.METHODS:Phenotypic screening of 376 E. coli isolates for ESBL was conducted using disk diffusion. ESBL-producing isolates were tested using PCR and specific primers. The blaCTX-M cluster was identified using the RFLP method, and its genotype was sequenced.RESULTS:From 202 ESBL-producing E. coli , 185 (91.5%) possessed CTX-M genes. CTX-M-1 subtypes were found in 98% of the isolates. The blaCTX-M gene was identical to CTX-M-15.CONCLUSIONS:A high prevalence of CTX-M-1-producing E. coli apparently exists in Shiraz, Iran.