Spin populations in one-dimensional alternant spin systems: A theoretical approach

Spin-density maps, deduced from polarized neutron diffraction experiments, for both the pair and chain compounds of the system Mn2+Cu2+ have been reported recently. These results have motivated us to investigate theoretically the spin populations in such alternant mixed-spin systems. In this paper, we report our studies on the one-dimensional ferrimagnetic systems (S-A,S-B)(N) where hi is the number of AB pairs. We have considered all cases in which the spin Sri takes on allowed values in the range I to 7/2 while the spin S-B is held fixed at 1/2. The theoretical studies have been carried out on the isotropic Heisenberg model, using the density matrix renormalization group method. The effect of the magnitude of the larger spin SA On the quantum fluctuations in both A and B sublattices has been studied as a function of the system size N. We have investigated systems with both periodic and open boundary conditions, the latter with a view to understanding end-of-chain effects. The spin populations have been followed as a function of temperature as well as an applied magnetic field. High-magnetic fields are found to lead to interesting re-entrant behavior. The ratio of spin populations P-A-P-B is not sensitive to temperature at low temperatures.

High Oxygen Storage Capacity and High Rates of CO Oxidation and NO Reduction Catalytic Properties of Ce1-xSnxO2 and Ce0.78Sn0.2Pd0.02O2-delta

Ce1-xSnxO2 (x = 0.1-0.5) solid solution and its Pd substituted analogue have been prepared by a single step solution combustion method using tin oxalate precursor. The compounds were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and H-2/temperature programmed redution (TPR) studies. The cubic fluorite structure remained intact up to 50% of Sri substitution in CeO2, and the compounds were stable up to 700 C. Oxygen storage capacity of Ce1-xSnxO2 was found to be much higher than that of Ce1-xZrxO2 due to accessible Ce4+/Ce3+ and Sn4+/Sn2+ redox couples at temperatures between 200 and 400 C. Pd 21 ions in Ce0.78Sn0.2Pd0.02O2-delta are highly ionic, and the lattice oxygen of this catalyst is highly labile, leading to low temperature CO to CO2 conversion. The rate of CO oxidation was 2 mu mol g(-1) s(-1) at 50 degrees C. NO reduction by CO with 70% N-2 selectivity was observed at similar to 200 degrees C and 100% N-2 selectivity below 260 degrees C with 1000-5000 ppm NO. Thus, Pd2+ ion substituted Ce1-xSnxO2 is a superior catalyst compared to Pd2+ ions in CeO2, Ce1-xZrxO2, and Ce1-xTixO2 for low temperature exhaust applications due to the involvement of the Sn2+/Sn4+ redox couple along with Pd2+/Pd-0 and Ce4+/Ce3+ couples.

Identification of a discrete intermediate in the assembly disassembly of physalis mottle tymovirus through mutational analysis

Assembly intermediates of icosahedral viruses are usually transient and are difficult to identify. In the present investigation, site-specific and deletion mutants of the coat protein gene of physalis mottle tymovirus (PhMV) were used to delineate the role of specific amino acid residues in the assembly of the virus and to identify intermediates in this process. N-terminal 30, 34, 35 and 39 amino acid deletion and single C-terminal (N188) deletion mutant proteins of PhMV were expressed in Escherichia coli. Site-specific mutants H69A, C75A, W96A, D144N, D144N-T151A, K143E and N188A were also constructed and expressed. The mutant protein lacking 30 amino acid residues from the N terminus self-assembled to T = 3 particles in vivo while deletions of 34, 35 and 39 amino acid residues resulted in the mutant proteins that were insoluble. Interestingly, the coat protein (pR PhCP) expressed using pRSET B vector with an additional 41 amino acid residues at the N terminus also assembled into T = 3 particles that were more compact and had a smaller diameter. These results demonstrate that the amino-terminal segment is flexible and either the deletion or addition of amino acid residues at the N terminus does not affect T = 3 capsid assembly, in contrast, the deletion of even a single residue from the C terminus (PhN188 Delta 1) resulted in capsids that were unstable. These capsids disassembled to a discrete intermediate with a sedimentation coefficent of 19.4 S. However, the replacement of C-terminal asparagine 188 by alanine led to the formation of stable capsids. The C75A and D144N mutant proteins also assembled into capsids that were as stable as the pR PhCP, suggesting that C75A and D144 are not crucial for the T = 3 capsid assembly. pR PhW96A and pR PhD144N-T151A mutant proteins failed to form capsids and were present as heterogeneous aggregates. Interestingly, the pR PhK143E mutant protein behaved in a manner similar to the C-terminal deletion protein in forming unstable capsids. The intermediate with an s value of 19.4 S was the major assembly product of pR PhH69A mutant protein and could correspond to a 30mer. It is possible that the assembly or disassembly is arrested at a similar stage in pR PhN188 Delta 1, pR PhH69A and pR PhK143E mutant proteins.

First hyperpolarizability of bacteriorhodopsin, retinal and related molecules revisited

The previously reported beta values of BR and retinal based chromophores were very high but subsequent measurements found them to be much less. We have found that the beta values of these compounds do not vary so much with experimental conditions as with the method of analysis. Hyper-Rayleigh scattering measurements at 1543 and 1907 nm produce more realistic beta values close to the intrinsic (static) hyperpolarizability, beta(0) which for BR is still very high (275 x 10 (30) esu). The optical nonlinearity of BR arises entirely due to the protonated retinal Schiff Base (PRSB) which in its isolated form has the same intrinsic hyperpolarizability as that of the rotein.

Euran emännän neulakintaat : Tutkielma Luistarin haudan 56 neulakinnasfragmenteista

Tutkielman tavoitteena on tuottaa neulakinnasrekonstruktio Euran Luistarin kalmiston haudan 56 neulakinnasfragmenttien pohjalta. Hauta on tutkittu vuonna 1969, jolloin kalmistoalueen arkeologiset kaivaukset aloitettiin. Haudan löytöjen perusteella on aikaisemmin tehty kokonainen pukurekonstruktio, Euran muinaispuku. Luistarin hauta 56 on ruumishauta ja se on tehty naisvainajalle rautakaudella, 1000-luvun alkupuolella jKr. Neulakinnastekniikalla on valmistettu neuloksia jo tuhansia vuosia. Eri neulakinnastekniikoita on yritetty kuvata useilla teorioilla, joista paras lienee Egon H. Hansenin merkintätapa. Suomalaisen kansanperinteen mukaan maassamme on tehty neuleita kolmella erilaisella neulakinnastekniikalla: suomeksi , venäjäksi ja pyöräyttäen . Luistarin haudan 56 neulakinnastekniikalla valmistetut tekstiilifragmentit löytyivät vainajan vatsalta suuren puukontupen päältä sekä kämmenluiden ja sormusten yhteydestä. Fragmentteja saatiin kaivauksissa talteen yhteensä kuusi, joista suurin on kooltaan 6x9 cm. Fragmentit on sijaintinsa perusteella tulkittu kintaiden jäänteiksi. Hautaustilanteessa kintaat ovat ilmeisesti sijainneet vainajan vatsalla, eivätkä käsiin puettuina, sillä fragmentteja ei löytynyt kaikkien sormusten yhteydestä. Myös eräistä muista rautakautisista ruumishaudoista on löydetty neulakintaiden jäänteitä. Luistarin haudan 56 neulakinnasfragmenteista on tutkittu valmistustekniikka, lankojen paksuudet ja kierteisyydet. Selkeänä erottuvat kolme väriä on tulkittu mikroskooppitarkastelussa siniseksi, punaiseksi ja keltaiseksi. Pieni punaisen kerroksen pätkä aivan suurimman fragmentin reunassa on tulkittu peukalon tyveksi. Muita Suomesta löytyneitä rautakautisia neulakinnasfragmentteja ja niistä saatuja tietoja on käytetty vertailuaineistona. Kinnasrekonstruktioon käytetyt langat on värjätty luonnonväreillä. Värjäyksessä on käytetty osittain nykypäivän keinoja, mutta niin, että lopputulos poikkeaisi mahdollisimman vähän muinaistekniikoilla tehdystä. Punainen lanka on värjätty värimataralla eli krapilla, keltainen kanervalla ja sininen luonnonindigolla. Kintaiden muotoilu perustuu suomalaiseen neulakinnastraditioon ja lähialueiltamme löytyneisiin keskiaikaisiin neulakintaisiin.

Neulemallien muodikkuus : Näkyvätkö kansainväliset muotitrendit suomalaisten käsityölehtien neulemalleissa?

The aim of this work was to study, whether international fashion trends show in knit designs in Finnish craft magazines and how trends are modified. Women s knitted clothes and accessories in autumn winter season 2005 2006 were analyzed. Future research, trends, fashion, designing and knitting provides theoretical basis for this study. The trend material of this study came from Carlin Women s knitwear winter 2005 2006, which is fashion forecast for Women s knitwear. In addition to the trend book, I selected two international fashion magazines to reinforce this study. Fashion magazines were L´Officiel, 1000 models, Milan New York winter 05/06, No 52, April 2005 and Collezioni Donna, Prêt-à-porter autumn-winter 2005 2006, No 107. Finnish craft magazines in this study were MODA s issues 4/2005, 5/2005, 6/2005 and Novita s issues autumn 2005, winter 2005 and Suuri Käsityölehti s issues 8/2005, 9/2005, 10/2005. For the base of the analyze I took themes from the trend book. From fashion magazines I searched knitwear designs and these designs were sorted out by themes of trend book. To this trend and fashion material I compared knit designs from craft magazines. I analyzed how fashion trends show in knit designs and how they are modified. I also studied what features of trends were shown and which did not appear in knit designs of the craft magazines. For analyzing trend pictures and knit designs in craft magazines I applied qualitative content analysis and image analysis. According to the results of this research, effects of trend can be recognized in knit designs of craft maga-zines, although the fashion trends have been applied very discreetly. Knit designs were very similar re-gardless of magazine. The craft magazine data included approximately as many designs from Novita and MODA. In Suuri Käsityölehti provided only fifth of the designs data. There were also designs in MODA and Suuri Käsityölehti, which were made of Novita s yarns. This research material includes yarns of 15 different yarn manufacturers. Although half of all knit designs were knitted from Novita s yarn. There were 10 different yarns from Novita. Nevertheless Novita s yarn called Aino was the most popular. Finnish craft magazines have not respond to popularity of knitting. Magazines do not provide any novelty designs for knitters. Knit designs in Finnish craft magazines are usually practical basic designs without any innovativeness.

Oikein, nurin - miten Suomessa kudin : Tutkimus neulonnan työotteista.

The aim of this work was to study what kind of working grips people use to knit in Finland and decide if one grip is superior to others. I investigated how knitters have adopted their grips and how they experience their knitting. I also explored whether it is possible to change one's grip. To provide a theoretical basis for the research I observed knitting in terms of culture, skill and ergonomics. The first part of the study material comprised video recordings of the grips of 95 knitters together with background information collected via a questionnaire during the education of craft teachers at the University of Helsinki in spring 2004, 2005 and 2006. Using the data obtained I focused on three knitters, whose grip of the knitting needles clearly differed from the ergonomically good grip. In addition to them I interviewed one student, who had changed over to more ergonomic way of knitting after participating in the first part of this study. In this respect my study is a several events' case study. In order to analyse my data I used both qualitative and quantitative content analysis methods to complement each other. Most of my research participants had learned to knit in first years of elementary school or comprehensive school. Almost everyone had adopted the basics of knitting by imitating, and many of them had corrected "incorrect" positions from verbal instructions. Through practice the imitated position had gradually become the style unique to each knitter. The findings showed that students' background in knitting is quite varied due to the diverse level of craft teaching. This is reflected in their knitting grips and their interest in knitting. Students do not think that there is one right working grip. The most important thing is that working seems as fluent and relaxed as possible, at which point knitting is easy and flows freely. They often consider their own style so pleasing and well-functioning that they do not think there could be any room for improvement. This study pointed out that, while it is possible to change a knitter's working grip, there is a bigger challenge in acknowledging weaknesses in one's know how. According to the results of my research, the most common working grip among Finnish knitters' corresponds with the grip that has been described as ergonomically good. Over one third of all participants knitted this way. Hands keep the knitting firmly but without tension. The forefinger that guides the yarn from the ball rests gently against the knitting needle, and the yarn goes in front of the first joint of the forefinger. The position of the hands and loops is the same as in the ergonomically good grip, i.e. the fingertips of both hands and the loops are near the tips of the knitting needles, so that the fingers only have to move small distances. When knitters purl and plain, they commonly pick up the yarn from the back of the knitting needle in the same way as when knitting. While researching the common features of working grips I have learned what abnormal grips are like. Although I recognized many different ways to knit, all the peculiar grips were modifications of the continental way of knitting. The results of this study give a clear picture of those points knitters should focus their attention on in order to gain a good hold of the needles.

A simple procedure for purification of N-carbamoylputrescine: Application to assays of putrescine transcarbamoylase and agmatine iminohydrolase activities

The observation that N-carbamoylputrescine is quantitatively excluded on O-(carboxymethyl)-cellulose columns with simultaneous retention of putrescine and agmatine has been utilized to develop a sensitive radiometric assay for putrescine transcarbamoylase and a colorimetric assay for agmatine iminohydrolase. A simple procedure for obtaining bulk amounts of pure synthetic N-carbamoylputrescine by separation from putrescine and dicarbamoylputrescine on Dowex 50 (Na+) resin is described.

Layer-by-layer self-assembly of modified hyaluronic acid/chitosan based on hydrogen bonding

The fabrication of hydrogen bonded polymer self-assembly for drug delivery has been accomplished via layer-by-layer sequential assembly from aqueous solution. In this study, the self-assembly was constructed based on hydrogen bonding between DNA base (adenine and thymine) pairs substituted on the backbone of chitosan and hyaluronic acid. Chitosan was modified with adenine, whereas hyaluronic acid was modified with thymine. Subsequently, these two polymers were sequentially absorbed on flat substrate by taking advantage of interactions of DNA base pairs via hydrogen bonding. Interlayer hydrogen bonding of these two polymers produces stable multilayer film without using any cross-linking agent. Thin film formation on quartz substrate has been monitored with UV-vis spectra and an AFM study. Formation of multilayer hydrogen-bonded thin film has been further confirmed with SEM. Encapsulation and release behavior of the therapeutic drug from the multilayer thin film at different conditions has been illustrated using UV-vis spectra. Cell viability of modified polymers using MTT assay confirmed no cytotoxic effect.

Henkisyys, hyvinvointi, yksilöllisyys ja sosiaalisuus Helsingin Astanga Joogakoulussa

Astangajooga perustuu intialaisen Sri K. Pattabhi Joisin (1915-2009) opetukseen, ja siitä on viime vuosina tullut eräs suosituimmista ja kansainvälisesti laajimmalle levinneistä modernin joogan muodoista. Joogaa voidaan pitää yleisnimityksenä Intian uskontojen piirissä muotoutuneille askeettisille soteriologisille opeille. Käsitteellä moderni jooga kuitenkin viitataan sellaisiin intialaisesta joogatraditiosta tehtyihin tulkintoihin, jotka ovat syntyneet länsimaalaisten ja länsimaisen kulttuurin vaikutuspiirissä olleiden intialaisten toimesta viimeisen n. 150 vuoden aikana. Vaikka varhainen jooga olikin kiinteä osa intialaista uskonnollisuutta, modernin joogan suhde uskonnollis-filosofisiin juuriinsa on vähemmän yksiselitteinen. Tämä on havaittavissa myös Astangajoogan tapauksessa. Tutkielmani käsittelee suomalaisten Astangajoogan harjoittajien käsityksiä joogan merkityksistä. Ensisijaisena aineistonani toimivat kymmenen Helsingin Astanga Joogakoulussa harjoittelevan Sri K. Pattabhi Joisin opetusperinteeseen pohjautuvan Astangajoogan harjoittajan haastattelut. Astangajoogan harjoittajilta ei Helsingin Astanga Joogakoulussa vaadita sitoutumista mihinkään oppeihin tai elämäntapavalintoihin. Painopiste on voimakkaasti liikunnallisen ?sana-harjoittelun säännöllisessä ylläpitämisessä. Kuitenkin myös Astangajoogan menetelmissä ja Helsingin Astanga Joogakoulun opetuksessa on piirteitä, joiden perusteella Astangajoogan ei voida sanoa olevan täysin riippumaton sen taustalla vaikuttavasta uskonnollis-filosofisesta perinteestä. Tutkimuskysymykseni ovat 1) liittävätkö Astangajoogan harjoittajat joogaan uskonnollisiksi tai henkisiksi tulkittavia merkityksiä, ja 2) millaisia nämä merkitykset ovat ja miten ne liittyvät harjoituksen muihin ulottuvuuksiin (esim. terveydellinen, sosiaalinen, psykologinen). Tältä pohjalta toivon 3) pystyväni tarkastelemaan, miten Astanga asettuu nykypäivän uskonnolliseen kenttään, ja mitä sen harjoittajien näkemykset mahdollisesti kertovat uskonnon asemasta ja luonteesta nykyaikana. Analyysimetodinani käytän aineistolähtöistä sisällönanalyysia. Vertaan analyysissa esiin nousseita teemoja Paul Heelasin holistisen henkisyyden teoriaan. Holistisella henkisyydellä Heelas tarkoittaa subjektia ja subjektiivista kokemusta painottavaa, ulkoisista instituutioista riippumatonta uskonnollisuutta, jossa ruumiillisuudella, terveydellä ja sosiaalisilla suhteilla on tärkeä asema. Haastatteluaineiston analyysin pohjalta totean, että Astangajoogalla on usein harjoittajilleen henkisenä pidetty ulottuvuus. Haastattelemieni Astangajoogan harjoittajien henkisyyttä määrittelevät sisäisyys, omaehtoisuus ja holistisuus. Astangajoogasta etsittiin mm. vaihtoehtoa dogmaattiseksi koetulle kristinuskolle. Astangajoogan harjoittamista ei kuitenkaan voida pitää uushindulaisuuden muotona, vaan sitä pidettiin ”uskontovapaana henkisyytenä”. Analyysin perusteella voidaankin todeta, että haastateltujen esittämät näkemykset vastasivat yleisesti varsin hyvin Paul Heelasin holistisen henkisyyden teorian keskeisiä teemoja. Kuitenkin myös merkittäviä poikkeuksia tästä esiintyi. Ne antavat aihetta mahdolliselle jatkotutkimukselle.

Artifactual staining of proteins on polyacrylamide gels by nitrobluetetrazolium chloride and phenazine methosulfate

Different purified proteins were shown to give purple formazan bands corresponding to the protein stain following electrophoresis on polyacrylamide gels, in the presence of nitrobluetetrazolium (NBT) and phenazine methosulfate (PMS). Both PMS and NBT are needed for formazan production which has a favorable pH at 8.5. Sulfhydryl blockers in the incubation medium inhibited this color development to different extents. While proteins with free SH groups like bovine serum albumin, ovalbumin, and urease showed this pyridine nucleotide independent artifact, nonthiol proteins, viz., bovine pancreatic ribonuclease A, and riboflavin-binding protein from chicken egg white failed to do so. The nonenzymatic formazan formation observed with different proteins could also be shown in an in vitro assay system. It is clear that the “nothing dehydrogenase” phenomenon observed in several cases may be due to the thiol group-mediated artifactual staining of proteins.

Structural Investigation of Activated Lattice Oxygen in Ce1-xSnxO2 and Ce1-x-ySnxPdyO2-delta by EXAFS and DFT calculation

Substitution of Sn4+ ion in CeO2 creates activated oxygen in Ce0.8Sn0.2O2 leading to higher oxygen storage capacity compared to Ce0.8Zr0.2O2. With Pd ion substitution in Ce0.8Sn0.2O2,activation of oxygen is further enhanced as observed from the H-2/TPR study. Both EXAFS analysis and DFT calculation reveal that in the solid solution Ceexhibits 4 + 4 coordination, Sri exhibits 4 + 2 + 2 coordination and Pd has 4 + 3 coordination. While the oxygen in the First four coordination with short M-O bonds are strongly held in the lattice, the oxygens in the second and higher coordinations with long M-O bonds are weakly bound, and they are the activated oxygen ill the lattice. Bond valence analysis shows that oxygen with valencies as low its 1.65 are created by the Sn and Pd ion Substitution. Another interesting observation is that H-2/TPR experiment of Ce1-xSnxO2 shows a broad peak starting from 200 to 500 degrees C, while the same reduction is achieved in a single step at similar to 110 degrees C in presence Pd2+ on. Substitution of Pd2+ ion thus facilitates synergistic reduction of the catalyst at lower temperature. We have shown that simultaneous reduction of the Ce4+ and Sr4+ ions by Pd-0 is the synergistic interaction leading to high oxygen storage capacity at low temperature.

An analytical model for performance evaluation of multimedia applications over EDCA in an IEEE 802.11e WLAN

We extend the modeling heuristic of (Harsha et al. 2006. In IEEE IWQoS 06, pp 178 - 187) to evaluate the performance of an IEEE 802.11e infrastructure network carrying packet telephone calls, streaming video sessions and TCP controlled file downloads, using Enhanced Distributed Channel Access (EDCA). We identify the time boundaries of activities on the channel (called channel slot boundaries) and derive a Markov Renewal Process of the contending nodes on these epochs. This is achieved by the use of attempt probabilities of the contending nodes as those obtained from the saturation fixed point analysis of (Ramaiyan et al. 2005. In Proceedings ACM Sigmetrics, `05. Journal version accepted for publication in IEEE TON). Regenerative analysis on this MRP yields the desired steady state performance measures. We then use the MRP model to develop an effective bandwidth approach for obtaining a bound on the size of the buffer required at the video queue of the AP, such that the streaming video packet loss probability is kept to less than 1%. The results obtained match well with simulations using the network simulator, ns-2. We find that, with the default IEEE 802.11e EDCA parameters for access categories AC 1, AC 2 and AC 3, the voice call capacity decreases if even one streaming video session and one TCP file download are initiated by some wireless station. Subsequently, reducing the voice calls increases the video downlink stream throughput by 0.38 Mbps and file download capacity by 0.14 Mbps, for every voice call (for the 11 Mbps PHY). We find that a buffer size of 75KB is sufficient to ensure that the video packet loss probability at the QAP is within 1%.

Fatigue fractures in military conscripts : A study on risk factors, diagnostics and long-term consequences

Fatigue fracture is an overuse injury commonly encountered in military and sports medicine, and known to relate to intensive or recently intensified physical activity. Bone responds to increased stress by enhanced remodeling. If physical stress exceeds bone s capability to remodel, accumulation of microfractures can lead to bone fatigue and stress fracture. Clinical diagnosis of stress fractures is complex and based on patient s anamnesis and radiological imaging. Bone stress fractures are mostly low-risk injuries, healing well after non-operative management, yet, occurring in high-risk areas, stress fractures can progress to displacement, often necessitating surgical treatment and resulting in prolonged morbidity. In the current study, the role of vitamin D as a predisposing factor for fatigue fractures was assessed using serum 25OHD level as the index. The average serum 25OHD concentration was significantly lower in conscripts with fatigue fracture than in controls. Evaluating TRACP-5b bone resorption marker as indicator of fatigue fractures, patients with elevated serum TRACP-5b levels had eight times higher probability of sustaining a stress fracture than controls. Among the 154 patients with exercise induced anterior lower leg pain and no previous findings on plain radiography, MRI revealed a total of 143 bone stress injuries in 86 patients. In 99% of the cases, injuries were in the tibia, 57% in the distal third of the tibial shaft. In patients with injury, forty-nine (57%) patients exhibited bilateral stress injuries. In a 20-year follow-up, the incidence of femoral neck fatigue fractures prior to the Finnish Defence Forces new regimen in 1986 addressing prevention of these fractures was 20.8/100,000, but rose to 53.2/100,000 afterwards, a significant 2.6-fold increase. In nineteen subjects with displaced femoral neck fatigue fractures, ten early local complications (in first postoperative year) were evident, and after the first postoperative year, osteonecrosis of the femoral head in six and osteoarthritis of the hip in thirteen patients were found. It seems likely that low vitamin D levels are related to fatigue fractures, and that an increasing trend exists between TRACP-5b bone resorption marker elevation and fatigue fracture incidence. Though seldom detected by plain radiography, fatigue fractures often underlie unclear lower leg stress-related pain occurring in the distal parts of the tibia. Femoral neck fatigue fractures, when displaced, lead to long-term morbidity in a high percentage of patients, whereas, when non-displaced, they do not predispose patients to subsequent adverse complications. Importantly, an educational intervention can diminish the incidence of fracture displacement by enhancing awareness and providing instructions for earlier diagnosis of fatigue fractures.

Analytical models for capacity estimation of IEEE 802.11 WLANs using DCF for internet applications

We provide analytical models for capacity evaluation of an infrastructure IEEE 802.11 based network carrying TCP controlled file downloads or full-duplex packet telephone calls. In each case the analytical models utilize the attempt probabilities from a well known fixed-point based saturation analysis. For TCP controlled file downloads, following Bruno et al. (In Networking '04, LNCS 2042, pp. 626-637), we model the number of wireless stations (STAs) with ACKs as a Markov renewal process embedded at packet success instants. In our work, analysis of the evolution between the embedded instants is done by using saturation analysis to provide state dependent attempt probabilities. We show that in spite of its simplicity, our model works well, by comparing various simulated quantities, such as collision probability, with values predicted from our model. Next we consider N constant bit rate VoIP calls terminating at N STAs. We model the number of STAs that have an up-link voice packet as a Markov renewal process embedded at so called channel slot boundaries. Analysis of the evolution over a channel slot is done using saturation analysis as before. We find that again the AP is the bottleneck, and the system can support (in the sense of a bound on the probability of delay exceeding a given value) a number of calls less than that at which the arrival rate into the AP exceeds the average service rate applied to the AP. Finally, we extend the analytical model for VoIP calls to determine the call capacity of an 802.11b WLAN in a situation where VoIP calls originate from two different types of coders. We consider N-1 calls originating from Type 1 codecs and N-2 calls originating from Type 2 codecs. For G711 and G729 voice coders, we show that the analytical model again provides accurate results in comparison with simulations.