Economic Stability and Economic Governance in the Euro Area:What the European Crisis Can Teach on the Limits of Economic Integration

The recent European economic crisis has dramatically exposed the failures of
the various institutional mechanisms in place to maintain economic stability
in Europe, and has unveiled the difficulty in achieving international coordination
on fiscal and financial stability policies. Drawing on the European
experience, this article analyzes the concept of economic stability in international
law and highlights the peculiar problems connected to its maintenance
or promotion. First, we demonstrate that policies that safeguard and
protect economic stability are largely regulated and managed at the national
level, due to their inextricable relationship with the exercise of national political
power. Until recently, more limited levels of pan-European integration
did not make the coordination of economic stability policies seem necessary.
However, a much deeper level of economic integration makes it very difficult
to tackle an international economic crisis through national responses. If EU
Member states wish to maintain and deepen economic integration, they
must accept an erosion of sovereignty over their economic stability policies.
This will not only deprive states of a fundamental anchor of political power,
but also create a challenge for the maintenance of democratic control over
economic policies. Second, this article argues that soft law approaches are
likely ineffective in enforcing the regulatory disciplines required to ensure
economic stability.

Dublin 1916: theatre of revolt

In his essay, Anti-Object, Kengo Kuma proposes that architecture cannot and should not be understood as object alone but instead always as series of networks and connections, relationships within space and through form. Some of these relationships are tangible, others are invisible. Stan Allen and James Corner have also called for an architecture that is more performative and operative – ‘less concerned with what buildings look like and more concerned with what they do’ – as means of effecting a more intimate and promiscuous relationship between infrastructure, urbanism and buildings. According to Allen this expanding filed offers a reclamation of some of the areas ceded by architecture following disciplinary specialization:

‘Territory, communication and speed are properly infrastructural problems and architecture as a discipline has developed specific technical means to deal with these variables. Mapping, projection, calculation, notation and visualization are among architecture’s traditional tools for operating at the very large scale’.

The motorway may not look like it – partly because we are no longer accustomed to think about it as such – but it is a site for and of architecture, a territory where architecture can be critical and active. If the limits of the discipline have narrowed, then one of the functions of a school of architecture must be an attempt occupy those areas of the built environment where architecture is no longer, or has yet to reach. If this is a project about reclamation of a landscape, it is also a challenge to some of the boundaries that surround architecture and often confine it, as Kuma suggests, to the appreciation of isolated objects.

M:NI 2014-15
We tend to think of the motorway as a thing or an object, something that has a singular function. Historically this is how it has been seen, with engineers designing bridges and embankments and suchlike with zeal … These objects like the M3 Urban Motorway, Belfast’s own Westway, are beautiful of course, but they have caused considerable damage to the city they were inflicted upon.

Actually, it’s the fact that we have seen the motorway as a solid object that has caused this problem. The motorway actually is a fluid and dynamic thing, and it should be seen as such: in fact it’s not an organ at all but actually tissue – something that connects rather than is. Once we start to see the motorway as tissue, it opens up new propositions about what the motorway is, is used for and does. This new dynamic and connective view unlocks the stasis of the motorway as edifice, and allows adaptation to happen: adaptation to old contexts that were ignored by the planners, and adaptation to new contexts that have arisen because of or in spite of our best efforts.

Motorways as tissue are more than just infrastructures: they are landscapes. These landscapes can be seen as surfaces on which flows take place, not only of cars, buses and lorries, but also of the globalized goods carried and the lifestyles and mobilities enabled. Here the infinite speed of urban change of thought transcends the declared speed limit [70 mph] of the motorway, in that a consignment of bananas can cause soil erosion in Equador, or the delivery of a new iphone can unlock connections and ideas the world over.

So what is this new landscape to be like? It may be a parallax-shifting, cognitive looking glass; a drone scape of energy transformation; a collective farm, or maybe part of a hospital. But what’s for sure, is that it is never fixed nor static: it pulses like a heartbeat through that most bland of landscapes, the countryside. It transmits forces like a Caribbean hurricane creating surf on an Atlantic Storm Beach: alien forces that mutate and re-form these places screaming into new, unclear and unintended futures.

And this future is clear: the future is urban. In this small rural country, motorways as tissue have made the whole of it: countryside, mountain, sea and town, into one singular, homogenous and hyper-connected, generic city.

Goodbye, place. Hello, surface!

MNI: Motorway Notation Network

In his essay, Anti-Object, Kengo Kuma proposes that architecture cannot and should not be understood as object alone but instead always as series of networks and connections, relationships within space and through form. Some of these relationships are tangible, others are invisible. Stan Allen and James Corner have also called for an architecture that is more performative and operative – ‘less concerned with what buildings look like and more concerned with what they do’ – as means of effecting a more intimate and promiscuous relationship between infrastructure, urbanism and buildings. According to Allen this expanding filed offers a reclamation of some of the areas ceded by architecture following disciplinary specialization:

‘Territory, communication and speed are properly infrastructural problems and architecture as a discipline has developed specific technical means to deal with these variables. Mapping, projection, calculation, notation and visualization are among architecture’s traditional tools for operating at the very large scale’.

The motorway may not look like it – partly because we are no longer accustomed to think about it as such – but it is a site for and of architecture, a territory where architecture can be critical and active. If the limits of the discipline have narrowed, then one of the functions of a school of architecture must be an attempt occupy those areas of the built environment where architecture is no longer, or has yet to reach. If this is a project about reclamation of a landscape, it is also a challenge to some of the boundaries that surround architecture and often confine it, as Kuma suggests, to the appreciation of isolated objects.

M:NI 2014-15
We tend to think of the motorway as a thing or an object, something that has a singular function. Historically this is how it has been seen, with engineers designing bridges and embankments and suchlike with zeal … These objects like the M3 Urban Motorway, Belfast’s own Westway, are beautiful of course, but they have caused considerable damage to the city they were inflicted upon.

Actually, it’s the fact that we have seen the motorway as a solid object that has caused this problem. The motorway actually is a fluid and dynamic thing, and it should be seen as such: in fact it’s not an organ at all but actually tissue – something that connects rather than is. Once we start to see the motorway as tissue, it opens up new propositions about what the motorway is, is used for and does. This new dynamic and connective view unlocks the stasis of the motorway as edifice, and allows adaptation to happen: adaptation to old contexts that were ignored by the planners, and adaptation to new contexts that have arisen because of or in spite of our best efforts.

Motorways as tissue are more than just infrastructures: they are landscapes. These landscapes can be seen as surfaces on which flows take place, not only of cars, buses and lorries, but also of the globalized goods carried and the lifestyles and mobilities enabled. Here the infinite speed of urban change of thought transcends the declared speed limit [70 mph] of the motorway, in that a consignment of bananas can cause soil erosion in Equador, or the delivery of a new iphone can unlock connections and ideas the world over.

So what is this new landscape to be like? It may be a parallax-shifting, cognitive looking glass; a drone scape of energy transformation; a collective farm, or maybe part of a hospital. But what’s for sure, is that it is never fixed nor static: it pulses like a heartbeat through that most bland of landscapes, the countryside. It transmits forces like a Caribbean hurricane creating surf on an Atlantic Storm Beach: alien forces that mutate and re-form these places screaming into new, unclear and unintended futures.

And this future is clear: the future is urban. In this small rural country, motorways as tissue have made the whole of it: countryside, mountain, sea and town, into one singular, homogenous and hyper-connected, generic city.

Goodbye, place. Hello, surface!

Assessment of the impact speed and angle conditions for the EN1317 barrier tests

Roadside safety barriers designs are tested with passenger cars in Europe using standard EN1317 in which the impact angle for normal, high and very high containment level tests is 20°. In comparison to EN1317, the US standard MASH has higher impact angles for cars and pickups (25°) and different vehicle masses. Studies in Europe (RISER) and the US have shown values for the 90th percentile impact angle of 30°–34°. Thus, the limited evidence available suggests that the 20° angle applied in EN 1317 may be too low.
The first goal of this paper is to use the US NCHRP database (Project NCHRP 17–22) to assess the distribution of impact angle and collision speed in recent ROR accidents. Second, based on the findings of the statistical analysis and on analysis of impact angles and speeds in the literature, an LS-DYNA finite element analysis was carried out to evaluate the normal containment level of concrete barriers in non-standard collisions. The FE model was validated against a crash test of a portable concrete barrier carried out at the UK Transport Research Laboratory (TRL).
The accident data analysis for run-off road accidents indicates that a substantial proportion of accidents have an impact angle in excess of 20°. The baseline LS-DYNA model showed good comparison with experimental acceleration severity index (ASI) data and the parametric analysis indicates a very significant influence of impact angle on ASI. Accordingly, a review of European run-off road accidents and the configuration of EN 1317 should be performed.

Behavioral modeling optimization and enhancement for high-speed analog mixed-signal I/O interfaces

A integridade do sinal em sistemas digitais interligados de alta velocidade, e avaliada através da simulação de modelos físicos (de nível de transístor) é custosa de ponto vista computacional (por exemplo, em tempo de execução de CPU e armazenamento de memória), e exige a disponibilização de detalhes físicos da estrutura interna do dispositivo. Esse cenário aumenta o interesse pela alternativa de modelação comportamental que descreve as características de operação do equipamento a partir da observação dos sinais eléctrico de entrada/saída (E/S). Os interfaces de E/S em chips de memória, que mais contribuem em carga computacional, desempenham funções complexas e incluem, por isso, um elevado número de pinos. Particularmente, os buffers de saída são obrigados a distorcer os sinais devido à sua dinâmica e não linearidade. Portanto, constituem o ponto crítico nos de circuitos integrados (CI) para a garantia da transmissão confiável em comunicações digitais de alta velocidade. Neste trabalho de doutoramento, os efeitos dinâmicos não-lineares anteriormente negligenciados do buffer de saída são estudados e modulados de forma eficiente para reduzir a complexidade da modelação do tipo caixa-negra paramétrica, melhorando assim o modelo standard IBIS. Isto é conseguido seguindo a abordagem semi-física que combina as características de formulação do modelo caixa-negra, a análise dos sinais eléctricos observados na E/S e propriedades na estrutura física do buffer em condições de operação práticas. Esta abordagem leva a um processo de construção do modelo comportamental fisicamente inspirado que supera os problemas das abordagens anteriores, optimizando os recursos utilizados em diferentes etapas de geração do modelo (ou seja, caracterização, formulação, extracção e implementação) para simular o comportamento dinâmico não-linear do buffer. Em consequência, contributo mais significativo desta tese é o desenvolvimento de um novo modelo comportamental analógico de duas portas adequado à simulação em overclocking que reveste de um particular interesse nas mais recentes usos de interfaces de E/S para memória de elevadas taxas de transmissão. A eficácia e a precisão dos modelos comportamentais desenvolvidos e implementados são qualitativa e quantitativamente avaliados comparando os resultados numéricos de extracção das suas funções e de simulação transitória com o correspondente modelo de referência do estado-da-arte, IBIS.

ORBS and the limits of static slicing

Observation-based slicing is a recently-introduced, language-independent, slicing technique based on the dependencies observable from program behaviour. Due to the wellknown limits of dynamic analysis, we may only compute an under-approximation of the true observation-based slice. However, because the observation-based slice captures all possible dependence that can be observed, even such approximations can yield insight into the limitations of static slicing. For example, a static slice, S that is strictly smaller than the corresponding observation based slice is guaranteed to be unsafe. We present the results of three sets of experiments on 12 different programs, including benchmarks and larger programs, which investigate the relationship between static and observation-based slicing. We show that, in extreme cases, observation-based slices can find the true static minimal slice, where static techniques cannot. For more typical cases, our results illustrate the potential for observation-based slicing to highlight unsafe static slices. Finally, we report on the sensitivity of observation-based slicing to test quality.

Étude numérique des phénomènes transitoires dans une turbine axiale de type hélice durant l’emballement

Ce mémoire présente l’étude numérique d’un emballement de turbine hydraulique axiale à échelle modèle. Cet état transitoire est simulé du point de meilleur rendement jusqu’à l’atteinte de 95% de la vitesse d’emballement. Pour ce faire, une méthodologie numérique est développée à l’aide du logiciel commercial ANSYS CFX en utilisant une approche "Unsteady Reynolds Averaged Navier-Stokes" avec modèle de turbulence k-ε. Cette méthodologie numérique a été validée grâce à des mesures expérimentales de pression acquises en situation d’emballement sur les aubes d’une roue de turbine axiale étudiée au Laboratoire de Machines Hydrauliques de l’Université Laval. La validation des simulations numériques a été réalisée grâce à des comparaisons dans les domaines temporel et fréquentiel entre les pressions mesurées expérimentalement et calculées numériquement. Les analyses fréquentielles en transitoire ont été effectuées à l’aide de transformées en ondelettes afin de représenter l’évolution temporelle du spectre de fréquence. Des analyses qualitatives de phénomènes hydrauliques prenant place dans la turbine sont aussi présentées. Les analyses effectuées ont permis de confirmer le développement d’un tourbillon en précession par rapport à la roue dans l’aspirateur provocant les fluctuations de pression dominantes à des fréquences subsynchrones. La comparaison entre les données expérimentales et numériques a permis de valider une stratégie de simulation transitoire et d’en définir les limites en vue de prochaines simulations d’emballement. Des tests supplémentaires sont suggérés pour améliorer la précision ou le niveau de confiance de la méthode.

The Impact of Thought Speed and Variability on Psychological State and Threat Perception: Further Exploration of the Theory of Mental Motion

Thought speed and variability are purportedly common features of specific psychological states, such as mania and anxiety. The present study explored the independent and combinational influence of these variables upon condition-specific symptoms and affective state, as proposed by Pronin and Jacobs’ (Perspect Psychol Sci, 3:461–485, 2008) theory of mental motion. A general population sample was recruited online (N = 263). Participants completed a thought speed and variability manipulation task, inducing a combination of fast/slow and varied/repetitive thought. Change in mania and anxiety symptoms was assessed through direct self-reported symptom levels and indirect, processing bias assessment (threat interpretation). Results indicated that fast and varied thought independently increased self-reported mania symptoms. Affect was significantly less positive and more negative during slow thought. No change in anxiety symptoms or threat interpretation was found between manipulation conditions. No evidence for the proposed combinational influence of speed and variability was found. Implications and avenues for therapeutic intervention are discussed.

Increasing the speed of parallel decoding of turbo codes

Turbo codes experience a significant decoding delay because of the iterative nature of the decoding algorithms, the high number of metric computations and the complexity added by the (de)interleaver. The extrinsic information is exchanged sequentially between two Soft-Input Soft-Output (SISO) decoders. Instead of this sequential process, a received frame can be divided into smaller windows to be processed in parallel. In this paper, a novel parallel processing methodology is proposed based on the previous parallel decoding techniques. A novel Contention-Free (CF) interleaver is proposed as part of the decoding architecture which allows using extrinsic Log-Likelihood Ratios (LLRs) immediately as a-priori LLRs to start the second half of the iterative turbo decoding. The simulation case studies performed in this paper show that our parallel decoding method can provide %80 time saving compared to the standard decoding and %30 time saving compared to the previous parallel decoding methods at the expense of 0.3 dB Bit Error Rate (BER) performance degradation.

Broadband Green's Function and Applications to Fast Electromagnetic Analysis of High-Speed Interconnects

Thesis (Ph.D.)--University of Washington, 2015

Reference clock design for low power and low phase noise with temperature compensation

Thesis (Ph.D.)--University of Washington, 2016-03