Novel metallo-porphyrin based colourimetric amine sensors and their processing via plasma enhanced chemical vapour deposition at atmospheric pressure : synthesis, characterisation and mechanistic studies

Volatile amines are prominent indicators of food freshness, as they are produced during many microbiological food degradation processes. Monitoring and indicating the volatile amine concentration within the food package by intelligent packaging solutions might therefore be a simple yet powerful way to control food safety throughout the distribution chain.rnrnIn this context, this work aims to the formation of colourimetric amine sensing surfaces on different substrates, especially transparent PET packaging foil. The colour change of the deposited layers should ideally be discernible by the human eye to facilitate the determination by the end-user. rnrnDifferent tailored zinc(II) and chromium(III) metalloporphyrins have been used as chromophores for the colourimetric detection of volatile amines. A new concept to increase the porphyrins absorbance change upon exposure to amines is introduced. Moreover, the novel porphyrins’ processability during the deposition process is increased by their enhanced solubility in non-polar solvents.rnrnThe porphyrin chromophores have successfully been incorporated into polysiloxane matrices on different substrates via a dielectric barrier discharge enhanced chemical vapour deposition. This process allows the use of nitrogen as a cheap and abundant plasma gas, produces minor amounts of waste and by-products and can be easily introduced into (existing) roll-to-roll production lines. The formed hybrid sensing layers tightly incorporate the porphyrins and moreover form a porous structure to facilitate the amines diffusion to and interaction with the chromophores.rnrnThe work is completed with the thorough analysis of the porphyrins’ amine sensing performance in solution as well as in the hybrid coatings . To reveal the underlying interaction mechanisms, the experimental results are supported by DFT calculations. The deposited layers could be used for the detection of NEt3 concentrations below 10 ppm in the gas phase. Moreover, the coated foils have been tested in preliminary food storage experiments. rnrnThe mechanistic investigations on the interaction of amines with chromium(III) porphyrins revealed a novel pathway to the formation of chromium(IV) oxido porphyrins. This has been used for electrochemical epoxidation reactions with dioxygen as the formal terminal oxidant.rn

Moisture and potential vorticity in medicanes: theoretical approach and case studies

Da poco più di 30 anni la comunità scientifica è a conoscenza dell’occasionale presenza di strutture cicloniche con alcune caratteristiche tropicali sul Mar Mediterraneo, i cosiddetti medicane. A differenza dei cicloni baroclini delle medie latitudini, essi posseggono una spiccata simmetria termica centrale che si estende per gran parte della troposfera, un occhio, talvolta privo di nubi, e una struttura nuvolosa a bande spiraleggianti. Ad oggi non esiste ancora una teoria completa che spieghi la loro formazione ed evoluzione. La trattazione di questa tesi, incentrata sull’analisi dei campi di vorticità potenziale e di umidità relativa, è sviluppata nell’ottica di una miglior comprensione delle dinamiche alla mesoscala più rilevanti per la nascita dei medicane. Lo sviluppo di tecniche avanzate di visualizzazione dei campi generati dal modello WRF, quali l’animazione tridimensionale delle masse d’aria aventi determinate caratteristiche, ha permesso l’individuazione di due zone di forti anomalie di due campi derivati dalla vorticità potenziale in avvicinamento reciproco, intensificazione e mutua interazione nelle ore precedenti la formazione dei medicane. Tramite la prima anomalia che è stata chiamata vorticità potenziale secca (DPV), viene proposta una nuova definizione di tropopausa dinamica, che non presenta i problemi riscontrati nella definizione classica. La seconda anomalia, chiamata vorticità potenziale umida (WPV), individua le aree di forte convezione e permette di avere una visione dinamica dello sviluppo dei medicane alle quote medio-basse. La creazione di pseudo immagini di vapore acqueo tramite la teoria del trasferimento radiativo e la comparazione di queste mappe con quelle effettivamente misurate nei canali nella banda del vapore acqueo dai sensori MVIRI e SEVIRI dei satelliti Meteosat hanno da un lato confermato l’analisi modellistica, dall’altro consentito di stimare gli errori spazio-temporali delle simulazioni. L’utilizzo dei dati di radianza nelle microonde, acquisiti dai sensori AMSU-B e MHS dei satelliti NOAA, ha aggiunto ulteriori informazioni sia sulle intrusioni di vorticità potenziale che sulla struttura degli elementi convettivi presenti sul dominio, in modo particolare sulla presenza di ghiaccio in nube. L’analisi dettagliata di tre casi di medicane avvenuti nel passato sul Mar Mediterraneo ha infine consentito di combinare gli elementi innovativi sviluppati in questo lavoro, apportando nuove basi teoriche e proponendo nuovi metodi di indagine non solo per lo studio di questi fenomeni ma anche per un’accurata ricerca scientifica su ciclogenesi di altro tipo.

Adsorption behavior of redox-active suppressor additives: Combined electrochemical and STM studies

The redox chemistry and the related surface phase behavior of Safranine (SAF) and Janus Green B (JGB) have been studied by means of cyclic voltammetry in combination with in situ Scanning Tunneling Microscopy using HOPG (Highly Oriented Pyrolytic Graphite) and single crystalline Cu(1 0 0) as model substrates, both revealing different widths of the accessible potential windows. JGB and SAF serve as prototypical heterocyclic suppressor/leveler additives that are used for the metallization of 3D-TSVs (3D Through Silicon Vias) following a classical "leveling" concept. SAF can be considered as the reductive decomposition product of JGB that is formed at the copper/electrolyte interface upon electroplating. Both additives reveal a pronounced pH-dependent redox-chemistry with redox-transitions lying close to or even beyond the anodic limit of the copper potential window. Affected by these redox-processes are in particular the aromatic cores of those heterocycles that can be (quasi)reversibly reduced by a two electron transfer process within the potential window of copper. Therefore we identify the reduced form of those dyes as the active components for the suppressing/leveling effect in copper plating. STM data clearly shows a dye surface phase behavior that is crucially determined by its potential-dependent redox-chemistry. This will be exemplarily discussed for the SAF dye. On chloride-modified Cu(1 0 0) mono-reduced SAF forms a structurally well-defined monolayer of cationic stacking polymers. However, this coupled anion/cation layer reveals only minor suppressing capabilities with respect to the copper dissolution and deposition processes. Complete reduction of the aromatic heterocycle finally leads to the 3D precipitation of hydrophobic reaction products. 3D clusters of this SAF precipitate are discussed as the active structural motif for the suppressing effect of these dyes. (C) 2011 Elsevier Ltd. All rights reserved.

Investigation of Human-Structure Interaction Through Experimental and Analytical Studies

Vibration serviceability is a widely recognized design criterion for assembly-type structures, such as stadiums, that are likely subjected to rhythmic human-induced excitation. Human-induced excitation of a structure occurs from the movement of the occupants such as walking, running, jumping, or dancing. Vibration serviceability is based on the level of comfort that people have with the vibrations of a structure. Current design guidance uses the natural frequency of the structure to assess vibration serviceability. However, a phenomenon known as human-structure interaction suggests that there is a dynamic interaction between the structure and passive occupants, altering the natural frequency of the system. Human-structure interaction is dependent on many factors, including the dynamic properties of the structure, posture of the occupants, and relative size of the crowd. It is unknown if the shift in natural frequency due to humanstructure interaction is significant enough to warrant consideration in the design process. This study explores the interface of both structural and crowd characteristics through experimental testing to determine if human-structure interaction should be considered because of its potential impact on serviceability assessment. An experimental test structure that represents the dynamic properties of a cantilevered stadium structure was designed and constructed. Experimental modal analysis was implemented to determine the dynamic properties of the empty test structure and when occupied with up to seven people arranged in different locations and postures. Comparisons of the dynamic properties were made between the empty and occupied testing configurations and analytical results from the use of a dynamic crowd model recommended from the Joint Working Group of Europe. Data trends lead to the development of a refined dynamic crowd model. This dynamic model can be used in conjunction with a finite element model of the test structure to estimate the dynamic influence due to human-structure interaction due to occupants standing with straight knees. In the future, the crowd model will be refined and can aid in assessing the dynamic properties of in-service stadium structures.

Solvatochromic and Thermochromic Studies of Tryptanthrin

Solvatochromism and thermochromism describe how a solvent or environment affects the photophysical behavior of a photoluminescent solute. The most common use of solvatochromism is as a probe in which the polarity of a solvent in which a solvatochromic solute is dissolved can be spectroscopically measured. Solvatochromic and thermochromic studies of tryptanthrin in several different solvents are reported. Absorption and corrected emission spectra for tryptanthrin at ~10-6 M concentrations are reported in four aprotic and nine alcoholic solvents. The absorption spectra are relatively unaffected by changes in solvent polarity and by differences in the hydrogen bonding ability of the alcoholic solvents. The emission spectra are much more affected by changes in solvent polarity and hydrogen bonding ability. In aprotic solvents, emission energy decreases and emission intensity increases with increasing solvent polarity. In the alcoholic solvents, emission energy also decreases with increasing solvent polarity. However, emission intensity for the alcoholic solvents varies significantly from the aprotic solvents over similar polarity ranges. This suggests that in the alcoholic solvents, hydrogen bonding ability correlates better than polarity to emission energy and intensity trends. The absorption and emission data in the aprotic solvents were also used to estimate the ground and emitting excited state dipole moments for tryptanthrin. The value obtained for the ground state dipole moment (2.37 D) agrees with theoretical results (2.06 D) and a previously reported experimental value (2.0 D). Attempts to explain previously reported results and conclusions with respect to the solvatochromic behavior of the aromatic carbonyls fluorenone and benzo(b)fluorenone were explored in an attempt to understand the solvatochromic response of tryptanthrin. Such attempts include models dependent on non-radiative decay pathways like intersystem crossing, internal conversion, and hydrogen bonding interactions.

Teaching the Millennial Generation in the Religious and Theological Studies Classroom

This essay provides an overview of the distinctive challenges presented to teaching and learning in religious and theological studies by the conditions and characteristics of “millennial” students. While the emerging literature on this generation is far from consistent, it is still instructive and important to engage, as students that are immersed in technology and social networking have different facilities and difficulties that educators would do well to carefully address and critically employ. Teachers in theological and religious studies are distinctly positioned to grapple with such conditions, particularly around the practices of identity formation, media literacy, and embodiment. Attention to the development of such practices engages key issues for both the millennial students and the religious and theological studies teacher: virtual reality, spiritual identity, globalization and violence, critical consumption and ethical creativity, focused and contemplative thinking, and intercultural and interpersonal respect.