Introdução de Lentinulaedodes (Shiitake) e Pleurotusostreatus (Shimeji) em bagaço de cana termo explodido para diminuição da toxicidade

Ethanol production has gained great prominence in the investment new renewable energy sources and Brazil is among the leaders of production. However, this activity generates large amounts of waste being the largest volume of the sugar cane bagasse. For this reason looking up ways to use this material as burning for energy production and composition of forage in the diet of ruminants, however there are difficulties to use this production for this last one. This paper proposes a microbiological treatment with Lentinula edodes and Pleurotus ostreatus in order to enable the bagasse in ruminant feed composition in order to be used more noble than their burning. After treatment with the fungus, tests were performed for quantifying crude protein by the method of Kjeldhal. It was verified that the protein content in the pure bagasse was 1.0% after fermentation the protein content was 4.2% with L.edodes and 4.9% with P. ostreatus. To evaluate the protein quality of the product fermented by L. edodes and P. ostreatus was applied microbiological method for growth of Enterococcus zimogenes verifying that after fermentation the protein quality was 76 and 27.4% with L. edodes and P.ostreatus, respectively, compared with casein. The quantification of amino acids showed significant improvement of protein with altered amino acid profile with treatments of fungos. About of DQO and BOD were also found considerable improvement besides considerable drop in toxicity as measured by acute toxicity test with Daphinia similis

Estudo da anatomia interna dos incisivos laterais superiores pelos métodos radiográficos digital e convencional

The maxillary lateral incisor has a very peculiar and internal morphology that can be influenced by the its external anatomy such as supernumerary roots and ruts deep root, which often hinders an effective endodontic treatment. Generally, this tooth have a single root with one root canal, but teeth with two to four channels can be found. The main canal can present ramifications such as accessory canals, laterals, collaterals, recorrents and apical deltas. All this factors interfere directally on endodonthics treatment. The objective of this work is a study of the internal anatomy of the maxillary lateral incisors by digital and conventional radiographics methods, comparing the results obteined by each method Six hundred upper lateral incisor were used in this study teeth of the collection of the Department of Anatomy ICT – UNESP. All the teeth were radiographed by vestibular face, using a digital radiographic unit(Dabi Atlante). After this step, all the teeth underwent by conventional radiographic technique(Kodak 2200) so that the results obtained were compared. To classify the channel system, it was adopted the classification of Pucci and Reig. All data obtained by digital technique were compared with those obtained in the conventional technique and were subjected to statistical analysis

Alterações metabólicas e morfométricas induzidas por hipóxia em Gallus gallus

Pós-graduação em Zootecnia - FCAV

Qualidade e erodibilidade de latossolos sob mata e cultivo de cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Divergência genética entre árvores matrizes de Ceiba speciosa St. Hil. para características de frutos e sementes

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Preparo e caracterização de nanopartículas lipídicas sólidas como sistema carreador conjunto para os herbicidas atrazina e simazina visando futuras aplicações em agricultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de cascas de laranja como adsorvente de contaminantes no tratamento de água

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo preliminar do potencial de alguns asteroides

A survey we conducted, and bring expressed in this text is a preliminary study on the shape of asteroids and allowed us to understand a little more the dynamics around these bodies, in order that the images we have of asteroids are the most irregular possible. In this work, the asteroid is modeled by the method of the polyhedron, which provides a very good accuracy of the irregular shape of the body. Through study of models for non-spherical gravitational potential bodies, implementation of computational algorithms and numerical simulations a preliminary analysis was performed in relation to the shape of asteroids 4179 Toutatis, 6489 Golevka, 2063 Bacchus, 1620 Geographos and 1998 ML14, as well as regions of stability instability, we compute the coefficients of the gravitational potential. The work not only enables expansion for the case of asteroids, but also for other non-spherical bodies, contributing to the development of targeted studies the origin and evolution of the solar system, and perhaps the origin of the earth, and new technologies for modeling and mapping of non-spherical bodies. The main results were obtained by analyzing the graphics format and planning of asteroids, which confirmed how these bodies are irregular and show how distribution of non-homogeneous mass. Observe the behavior of the curves of zero velocity and equipotential curves as well as their respective surfaces. Also, compute some values of the gravitational potential and the spherical harmonic coefficients of each object. Furthermore, we find possible equilibrium points of asteroids except 4179 Toutatis, and analyze its stability

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Proposta de uma metodologia de rebobinamento para converter motor de indução trifásico em monofásico

This paper proposes the conversion of a three-phase induction motor into single phase through rewinding its stator. It presents a methodology to calculate this rewinding process considering the constructive parameters of the, such as number of slots and number of poles, for instance. The operating principles of DC motors are highlighted to introduce the logic involved in the calculation of lap and wave windings. The construction of the stator three-phase induction motor generally uses the lap winding, which is also used in single phase to perform the conversion. The rewinding process is widely used for reconstruction of industrial and residential electric motors that have suffered damage or present flaws with use. Therefore, many three-phase electric motors that are discarded or disposed of could be recovered by the method described in this work for a purpose that contributes to energy efficiency or simply saving resources in single-phase uses

Classificação morfológica e imunostoquímica em microarranjo de tecido (TMA) de linfomas não-Hodgkin em cães conforme os critérios da Histological Classification od Hematopoietic Tumors of Domestic Animals (WHO)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da toxicidade do azocorante Acid Red 114 antes e após processo de biodegradação por meio de um consórcio de microorganismos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade nutricional e aceitabilidade da geleia convencional e light de maná cubiu

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Polymeric alginate microspheres containing biochar to immobilize phosphate ions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Liberação de componentes do extrato de Casearia sylvestris Swartz empregando membranas de látex natural como suporte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)