Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Grande (BA)

The Urucuia Aquifer System represents a strategic water source in western Bahia. Its baseflow is responsible for the flow rate of the main tributaries of São Francisco river left bank in the dry season, including the Rio Grande, its main tributary in Bahia state. This river has a hydrological regime heavily affected by groundwater and is located in a region with conflicts about water resources. The aquifers geology is constituted by neocretacious sandstones of Urucuia Group subdivided in Posse Formation and Serra das Araras Formation. The embasement is formed by neoproterozoic rocks of Bambuí Group. This work focuses on an important tool application, the mathematical model, whose function is represent approximately and suitably the reality so that can assist in different scenarios simulations and make predictions. Many studies developed in this basin provided the conceptual model basis including a full free aquifer, lithological and hydraulical homogeneity in entire basin, null flux at plateau borders and aquifer base. The finite element method is the numerical method used and FEFLOW the computational algorithm. The simulated area was discretized in a single layer with 27.357,6 km² (314.432 elements and 320.452 nodes) totaling a 4.249,89 km³ volume. Were utilized 21 observation wells from CERB to calibrate the model. The terrain topography was obtained by SRTM data and the impermeable base was generated by interpolation of descriptive profiles from wells and electric vertical drilling from previous studies. Works in this area obtained mean recharge rates varying approximately from 20% to 25% of average precipitation, thus the values of model recharge zones varying in this range. Were distributed 4 hydraulic conductivity zones: (K1) west zone with K=6x10-5 m/s; (K2) center-east zone with K=3x10-4 m/s; (K3) far east zone with K=5x10-4 m/s; e (K4) east-north zone with K=1x10-5 m/s. Thereby was incorporated to the final conceptual model...

A simulação de Monte Carlo como instrumento fundamental para a análise de viabilidade econômica: a implementação de uma fundição de ferro em uma empresa metalúrgica

In uncertainly economic scenarios, an economic feasibility analysis must be done to accept a project based on investment criteria, such as NPV and IRR, mainly because the shareholders tend to invest their budget in a project if it has a great chance to return their investments. The studied company outsources all of its foundry services, what makes it very dependent of its suppliers, because the products have a lower quality level, long delivery periods and high prices. Therefore, this work will analyze the project of building an iron-casting foundry to decrease the dependence of its suppliers. In order to develop this research, all needed data related to the construction of the foundry and sales were collected to create deterministic and probabilistic (Monte Carlo Simulation) cash flows using MsExcel® and Oracle's Crystal Ball® software. As a result, the project was found to be risky by the NPV and IRR in the case of this new production line supplying only the internal needs. However, when the company offers its services to the foundry market, the project turns to be feasible

Simulação do tempo de descarga de caminhões graneleiros em uma estação de transbordo de carga em Porto Murtinho, MS

In the current decade, inter modal transport is widely discussed. In Brazil road transport is used in excess whereas there could be more focus and investment towards water transport. Water transport presents many benefits like being low cost and low maintenance. Sea and river ports today aren't capable of supporting Brazil's transport needs. Therefore, with this obstacle, this paper consists of an attempt of modeling and simulation of the process of unloading grain cargo from trucks, through simulation with ProModel software, to verify the necessity of installing more tumblers at the cargo unloading station in Porto Murtinho, MS

Estudo da fluência dos aços inoxidáveis ferríticos estabilizados ao titânio e nióbio e simulação numérica do processo no abaqus

The purpose of this research was tested a finite element model (FEM) that represented the creep of a slab during the reheating process of hot rolling. The aim is to prevent creep phenomenon changing the reheating profile with hot tensile test in Gleeble 3500, and, also, understand the former defect crisis. The goal of this work is to have a predictive tool to optimize the reheating process changing parameters (length and thickness). Then, use input parameters obtained from the tests to approximate the solution of the problem aided by Abaqus CAE. The results have showed that the ferritic stainless steel AISI 409 has a lower sensitivity to creep comparing to the stainless steel AISI 409, AISI 430Ti, AISI 441 and AISI 444

Análise e simulação de modelos matemáticos para a estimativa da geração de gases em bioprocessos de decomposição anaeróbia de resíduos sólidos em aterros sanitários

Brazil faces a complex problem in respect to municipal solid waste, having been in recent years an increase of its generation without the country there be adequate for proper disposal thereof. In many states , the percentage of waste destined improperly , ie , in dumps , landfills, send- outs , among others , is greater than that disposed in landfills , which would be the most correct way to be made. It can be argued that this discrepancy is due to the high cost of implementation and operation of the landfill, and the same need large areas with physical characteristics that suit their operations . When there is a provision in properly constructed landfills , municipal solid waste grounded generate gases with high potential energy through biochemical reactions during the anaerobic decomposition of organic material stored . Such gases can be used for power generation within the landfill or other economic means . To estimate the gas generation will be sufficient for such economic compensation , there are mathematical models that make estimating the amount of gas produced . These models calculate the energy capacity and generation , using parameters obtained based on the characteristics of solid waste , climate of the region where they are grounded and grounding time . Such models have been raised and studied so that it was possible to perform simulations that demonstrate the behavior of biogas generation related to the external conditions of the landfill that interfere with biological reactions within. The results show differences between the values obtained , it shows that the preparation of the models found and used in the simulations were allocated amounts for different parameters that determine this difference in the estimate . Therefore, to rule, the models have difficulty understanding this because there is no clarity in the formulation of the equations , and the definition of variables and parameters would require a detailed study to...

Planejamento e organização das atividades de manutenção em instalações elétricas prediais e seus componentes

Are presented on this paper, concepts of corrective, preventive and predictive maintenances, following the prerequisites for planning and implementation of a maintenance plan. You also find the theoretical introduction of some measurement instruments accompanied by the necessary and recommended activities during routine maintenances of the electrical equipments in a building installation. Using case study, it is possible to assess a real maintenance plan applied to two occupied floors in a financial institution. The developing of a case study consolidates the effectiveness of the present concepts on this theoretical introduction and shows that the current maintenance plan can be improved in order to obtain better results on company productivity and reliability of equipments. As a conclusion, we can notice the importance of a solid maintenance plan and the need of including this theme on the graduation in Electrical Engineering

Filtragem de sinais de interferência em espectros dinâmicos solares através de suas componentes de Fourier

Through the data acquisition system of the instrument Brazilian Solar Spectroscope (BSS) at INPE, solar observations in the decimetric radio wave band (1000-2500 MHz) are regularly made. This data is showed as dynamic spectra using the software BSSView created for this purpose. The process of data acquisition can be influenced by various sources, dificulting the resulting dynamic spectrum analysis. The objective of this work is to create a computational routine that eliminates dynamic components of the spectrum attributed to interfering signals and integrate it into BSSView. It was done a preliminary study on the programming language Interactive Data Language (IDL), in which the BSSView was developed, and the Fourier transform, that is required for the application of the filter

Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Uso do método de Monte Carlo para simulação e detecção do espectro de raios-X gerado com feixes de elétrons em alvo de Molibdênio, utilizando o Geant4

The huge demand for procedures involving ionizing radiation promotes the need for safe methods of experimentation considering the danger of their biological e ects with consequent risk to humans. Brazilian's legislation prohibits experiments involving this type of radiation in humans through Decree 453 of Ministry of Health with determines that such procedures comply with the principles of justi cation, optimization and dose limitation. In this line, concurrently with the advancement of available computer processing power, computing simulations have become relevant in those situations where experimental procedures are too cost or impractical. The Monte Carlo method, created along the Manhattan Project duringWorldWar II, is a powerful strategy to simulations in computational physics. In medical physics, this technique has been extensively used with applications in diagnostics and cancer treatment. The objective of this work is to simulate the production and detection of X-rays for the energy range of diagnostic radiology, for molybdenum target, using the Geant4 toolkit. X-ray tubes with this kind of target material are used in diagnostic radiology, speci cally in mammography, one of the most used techniques for screening of breast cancer in women. During the simulations, we used di erent models for bremsstrahlung available in physical models for low energy, in situations already covered by the literature in earlier versions of Geant4. Our results show that although the physical situations seems qualitatively adequate, quantitative comparisons to available analytical data shows aws in the code of Geant4 Low Energy source

Modelagem e Simulação Computacional das propriedades estruturais, eletrônicas e constantes elásticas do ZnO

The electronic, structural properties and elastic constants of the wurtzite phase of zinc oxide, ZnO, was investigated using computer simulation at Density Functional Theory level, with B3LYP hybrid functional and Hartree-Fock methodology. The electronic properties as well the band energy was investigated through the analysis of the band structures and density of states (DOS), and the mechanical properties was studied through the calculus of the elastic constants C11, C33, C44, C12 e C13. The results are in good agreement with experimental data found in the literature and in accordance with results obtained by another theoretical methodology

Simulação numérica de fluxo de águas subterrâneas na fazenda Cara Preta - Santa Rita do Passa Quatro - SP

The term model refers to any representation of a real system. The use of models in Hydrogeology can be valuable predictive tools for management of groundwater resources. The numeric models of groundwater flow, object of this study, consist on a set of differential equations that describe the water flow in the porous medium. In this context, numeric simulations were made for a sub-basin located at Cara Preta farm – Santa Rita do Passa Quatro – SP. The aquifer at the local is composed by rocks of Pirambóia Formation, which is part of Guarani Aquifer System. It was developed a conceptual model from previous studies in the area, and from that, simulations were made through the software Visual Modflow®. The conceptual model established previously was considered consistent through the results of simulation.

A interferência do estado de humor na melhora dos componentes da capacidade funcional em idosos

Mood States are feelings auto regulation deliver to individual better quality of life and healthy aging. The declines of the aging process can be minimized with the regular practice of physical activity and systematized. The objective of this study was to evaluate the effects of a dance program in mood states, depressive symptoms and functional capacity in elderly participants of PROFIT. METHOD: The sample was composed of 20 elderly people. The Training Group was formed by 15 elders who participated in a protocol of dance with duration of 1 hour, three times per week, for 12 weeks and the Control Group, composed of 5 elderly, did not attend any program of physical activity. The participants were evaluated by the List of States of Mind Reduced and Illustrated, Geriatric Depression Scale and the battery of tests of AAHPERD. For the mood states was used non-parametric analysis, according to the technique of Binomial Analysis. To compare the components of functional capacity between the groups was used analysis of variance for repeated measures two-way ANOVA and the level of significance was set at 5 %. RESULTS: The functional components remained favorable, highlighting Agility (pre = 21.03 ± 1.64 sec./ post = 18.63 ± 2.26 sec.) And aerobic endurance (pre = 495.94 ± 46.48 sec. / post = 448.01 ± 12.27 sec.). In the comparison between positive and negative functional levels and mood states showed no relationship between these variables, dealing with different aspects and has influence one another. The state post-dancing sessions mood in GT were more positive even for elderly patients with depressive symptoms even unproven statistically, depressive symptoms were maintained or reduced mostly. CONCLUSION: The dance practice maintains the functionality of components; modifies mood states to positive levels and reduces or prevents the onset of depressive symptoms and complications in elderly

O efeito da autocorrelação no desempenho dos gráficos de X e R e dos gráficos de X e S²

Control charts are very important tools in statistical quality control of industrial processes and its use started last century. Since its development, the charts have always been attributed to independent processes, i.e. without any correlation between samples. But nowadays, with the high level of automation in the industrial environment, it is noticeable the autocorrelation factor between samples. The main Xcharts used in monitoring quality characteristics represented by continuous variables are the mean (X ), amplitude (R) and variance (S²). Therefore, this work aims to analyze the performance of X and R charts and in of X and S² charts with different sample sizes (4 and 5) for monitoring autocorrelated processes. Through computer simulations using the Fortran software and the use of mathematical expressions was possible to obtain data and performance analysis of the detection power charts for independent observations and for autocorrelated observations according to the model AR (1). The results show that the effect of autocorrelation reduces the ability of monitoring the control charts and that, the greater this effect, the slower the chart becomes in misfits signaling

Simulação de produção de sedimentos em microbacias em função de cenários de restauração florestal

In São Paulo state, deforestation and agriculture activities are increasing soil losses processes, especially in areas of susceptible soils where properties not adopt soil conservation practices. Environmental adequacy at property level regarding Permanent Protection Areas and Legal Reserves is considered a factor on reducing soil losses and considering that we assessed soil losses of different scenario of environmental adequacy. Simulations of erosive process were carried out in 15 catchments of Corumbataí river basin, according to different forest restoration scenarios, as well as the current situation of land use/land cover. The scenarios include the implementation of Permanent Preservation Areas (PPA), the reforestation of variable source areas, and two scenarios, the Legal Reserve installation in 20% of each catchment, being one of them for most critical areas in terms of erosion and the other at random. It was observed that the establishment of PPA and the reforestation of hydrologically sensitive areas, offered only a small contribution to the control of the erosive process, resulting in a reduction of 10% and 7,8%, respectively, while the legal reserve in critical areas has a significant reduction of 69,8%. The random scenario, in turn, resulted in a reduction of only 21,4%. Results show that reforestation could reduce soil losses, but previous studies of land prioritization and planning could increase significantly its efficiency at this process.

Modelagem de motor de combustão internae simulação do processo de queima de combustível

The internal combustion engine is a heat engine widely used in the automotive industry. In order to better understand its behavior many models in the literature have been proposed in the last years. The 0-D thermodynamic model is a fairly simple tool but it is very useful to understand the phenomenon of combustion inside the chamber of internal combustion engines. In the first phase of this work, an extensive literature review was made in order to get information about this kind of analysis and, after this, apply them in a model able to calculate the instantaneous temperature and pressure in one zone of the combustion chamber of a diesel engine. Therefore some considerations were made with the aim of increasing the accuracy of the model in predicting the correct behavior of the engine, adding the combined effects of heat transfer, leakage and injection. In the second phase, the goal was to study the internal flow of a three-dimensional model of an internal combustion engine. In order to achieve this goal the software Solidworks was used to create the geometries of an engine and the suite of softwares Ansys was used to create the moving mesh (ICEM CFD and CFX-Pre) and to solve the CFD problem (Ansys CFX code). The model was able to perform the air flow simulation during the four-stroke cycle of an engine: admission, compression, expansion and exhaust. The results obtained from both models were suitable and they open a new range of possibilities for future researches on the field